openwrt/target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch

From 6cc2d4ccd77509df74b7b8ef46bbc6ba0a571318 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
Date: Mon, 22 Apr 2024 10:15:16 +0300
Subject: [PATCH 09/15] net: dsa: mt7530: define MAC speed capabilities per
 switch model
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

With the support of the MT7988 SoC switch, the MAC speed capabilities
defined on mt753x_phylink_get_caps() won't apply to all switch models
anymore. Move them to more appropriate locations instead of overwriting
config->mac_capabilities.

Remove the comment on mt753x_phylink_get_caps() as it's become invalid with
the support of MT7531 and MT7988 SoC switch.

Add break to case 6 of mt7988_mac_port_get_caps() to be explicit.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 drivers/net/dsa/mt7530.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2676,6 +2676,8 @@ mt7531_setup(struct dsa_switch *ds)
 static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
 				     struct phylink_config *config)
 {
+	config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+
 	switch (port) {
 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
 	case 0 ... 4:
@@ -2707,6 +2709,8 @@ static void mt7531_mac_port_get_caps(str
 {
 	struct mt7530_priv *priv = ds->priv;
 
+	config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+
 	switch (port) {
 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
 	case 0 ... 4:
@@ -2746,14 +2750,17 @@ static void mt7988_mac_port_get_caps(str
 	case 0 ... 3:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
+
+		config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
 		break;
 
 	/* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
 	case 6:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
-		config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-					   MAC_10000FD;
+
+		config->mac_capabilities |= MAC_10000FD;
+		break;
 	}
 }
 
@@ -2923,9 +2930,7 @@ static void mt753x_phylink_get_caps(stru
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	/* This switch only supports full-duplex at 1Gbps */
-	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-				   MAC_10 | MAC_100 | MAC_1000FD;
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
 
 	/* This driver does not make use of the speed, duplex, pause or the
 	 * advertisement in its mac_config, so it is safe to mark this driver