ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 06:08:08 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
d9386dc8e9
openwrt/target/linux/bmips/image/bcm6328.mk

84 lines
2.0 KiB
Makefile
Raw Normal View History

bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
bmips: add support for Arcadyan AR7516 The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. It comes with a horizontal stand black shiny casing. Newer Bright Box 1 model stands vertically, and comes with a totally different board inside, not compatible with this firmware. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 8 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard) - USB: 1x 2.0 - ADSL: yes, unsupported - Buttons: 2x - LEDs: 9x, power LED is hardware controlled - UART: yes Installation in two steps, new CFE bootloader and firmware: Install new CFE: 1. Power off the router and press the RESET button 2. Power on the router and wait some seconds 3. Release the RESET button 3. Browse to http://192.168.1.1, this web interface will offer both firmware (“Software”) upgrade and bootloader upgrade; be sure to use the bootloader section of the upload form. 4. Upload the new CFE (availabe at the wiki page) 5. Wait about a minute for flashing to finish and reboot into the new bootloader. Install OpenWrt via new CFE web UI: 1. After installing the new CFE, visit http://192.168.1.1 2. Upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-21 21:14:02 +00:00
define Device/arcadyan_ar7516
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := AR7516
CHIP_ID := 6328
CFE_BOARD_ID := AR7516AAW
FLASH_MB := 8
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43227-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += arcadyan_ar7516
bmips: add support for Comtrend AR-5381u The Comtrend AR-5381u is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB DDR - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43225 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-11 16:44:36 +00:00
define Device/comtrend_ar-5381u
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := AR-5381u
CHIP_ID := 6328
CFE_BOARD_ID := 96328A-1241N
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43225-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5381u
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
define Device/comtrend_ar-5387un
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := AR-5387un
CHIP_ID := 6328
CFE_BOARD_ID := 96328A-1441N1
FLASH_MB := 16
bmips: switch to generic bcma/ssb fallback SPROM Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback SPROMs. This way we don't need to include the b43-sprom fixups on devices without Broadcom wireless. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-20 08:05:52 +00:00
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43225-sprom \
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5387un
bmips: add support for Sercomm AD1018 The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-12 17:51:22 +00:00
bmips: bcm6328: add Innacomm W3400V6 Innacomm W3400V6 is an xDSL B/G wireless router based on Broadcom BCM6328 SoC. SoC: Broadcom BCM6328 CPU: BMIPS4350 V8.0, 320 MHz, 1 core Flash: SPI-NOR 8MB, MX25L6406E RAM: 64 MB Ethernet: 4x 10/100 Mbps Switch: Integrated Wireless: 802.11b/g, BCM4312 LEDs/Buttons: 9x / 2x Flash instruction, web UI: 1. Set a static IP on your computer compatible with 192.168.1.1, i.e 192.168.1.100. 2. Connect the ethernet cable from your computer to the router. 3. Make sure the router is powered off. 4. Press the reset button, don't release it yet! 5. While pressing reset, power on the router. 6. Wait 10 seconds or more. Note: The power LED is red at first then turns to solid green when ready. 7. Release the reset button. 8. Browse to 192.168.1.1 9. Select .bin file. 10. Upgrade the image. 11. Wait for it to reboot. Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com> [Fix cfe nvmem-layout and pinctrl_leds indentation] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-08-09 05:13:57 +00:00
define Device/innacomm_w3400v6
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Innacomm
DEVICE_MODEL := W3400V6
CHIP_ID := 6328
CFE_BOARD_ID := 96328ang
FLASH_MB := 8
DEVICE_PACKAGES += $(B43_PACKAGES) \
broadcom-4318-sprom kmod-leds-bcm6328
endef
TARGET_DEVICES += innacomm_w3400v6
bmips: add support for NuCom R5010UNv2 The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard) - USB: 1x 2.0 - Buttons: 2x - ADSL: yes, unsupported - LEDs: 7x - UART: yes Installation via CFE web UI: 1. Power off the router and press the RESET button 2. Power on the router and wait 12 or more seconds 3. Release the RESET button 4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-18 19:34:59 +00:00
define Device/nucom_r5010unv2
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := NuCom
DEVICE_MODEL := R5010UNv2
CHIP_ID := 6328
CFE_BOARD_ID := 96328ang
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43217-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += nucom_r5010unv2
bmips: add support for Sercomm AD1018 The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-12 17:51:22 +00:00
define Device/sercomm_ad1018
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := AD1018
CHIP_ID := 6328
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43217-sprom \
kmod-leds-bcm6328
SERCOMM_FSVER := 1001
SERCOMM_HWVER := 1415153
SERCOMM_SWVER := 3013
endef
TARGET_DEVICES += sercomm_ad1018
Reference in New Issue Copy Permalink