openwrt/target/linux/ramips/dts/WIZFI630S.dts

191 lines
2.8 KiB
Plaintext
Raw Normal View History

//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
model = "WIZnet WizFi630S";
chosen {
bootargs = "console=ttyS1,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
aliases {
led-boot = &led_run;
led-failsafe = &led_run;
led-running = &led_run;
led-upgrade = &led_run;
serial0 = &uart1;
serial1 = &uartlite;
};
leds {
compatible = "gpio-leds";
led_run: run {
label = "wizfi630s:green:run";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
};
ledwps {
label = "wizfi630s:green:wps";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
leduart1 {
label = "wizfi630s:green:uart1";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
};
leduart2 {
label = "wizfi630s:green:uart2";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
};
scm1 {
label = "SCM1";
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
scm2 {
label = "SCM2";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_2>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "gpio";
ralink,function = "gpio";
};
i2s {
ralink,group = "i2s";
ralink,function = "gpio";
};
wdt {
ralink,group = "wdt";
ralink,function = "gpio";
};
i2c {
ralink,group = "i2c";
ralink,function = "gpio";
};
refclk {
ralink,group = "refclk";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
m25p,chunked-io = <31>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
&i2c {
status = "okay";
};
&uart1 {
status = "okay";
};
&pwm {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&esw {
mediatek,portmap = <0x3e>;
mediatek,portdisable = <0x26>;
};
&sdhci {
status = "okay";
mediatek,cd-high;
};
&wmac {
status = "okay";
};