openwrt/target/linux/layerscape/patches-5.4/302-dts-0003-arm64-dts-ls1012a-Add-LS1012A-2G5RDB-board-support.patch

From 3261cabf5607c9f434faa4930ab5c2b0150579c4 Mon Sep 17 00:00:00 2001
From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date: Wed, 29 Nov 2017 06:23:14 +0530
Subject: [PATCH] arm64: dts: ls1012a: Add LS1012A-2G5RDB board support

LS1012A-2G5RDB is a different design from LS1012ARDB,
but has some common SoC features. Key feature on this
board is 2.5Gbps SGMII.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile             |  1 +
 .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts      | 86 ++++++++++++++++++++++
 2 files changed, 87 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts

--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1012A 2G5RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A 2G5RDB Board";
+	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+	aliases {
+		ethernet0 = &pfe_mac0;
+		ethernet1 = &pfe_mac1;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&qspi {
+	num-cs = <2>;
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fs512s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+		reg = <0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&pfe {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethernet@0 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0>;	/* GEM_ID */
+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x0>;
+		phy-mode = "sgmii-2500";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x1>; /* enabled/disabled */
+		};
+	};
+
+	ethernet@1 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x1>;	/* GEM_ID */
+		fsl,gemac-bus-id = < 0x0>;	/* BUS_ID */
+		fsl,gemac-phy-id = < 0x2>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x0>;
+		phy-mode = "sgmii-2500";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x0>; /* enabled/disabled */
+		};
+	};
+};