openwrt/target/linux/layerscape/patches-5.4/701-net-0074-sdk_dpaa-enable-Jumbo-frame-support-on-LS1043A.patch

From fcf41cba6f3ac0f33a5e9e0c7d79dbbbff586271 Mon Sep 17 00:00:00 2001
From: Camelia Groza <camelia.groza@nxp.com>
Date: Tue, 15 May 2018 11:48:42 +0300
Subject: [PATCH] sdk_dpaa: enable Jumbo frame support on LS1043A

Due to the A010022 errata restrictions, Jumbo frames on LS1043A require two
conditions to be met:
- on TX, the data is stored in a contiguous buffer of up to 9600 bytes
- the data is aligned to 256 bytes

The conditions are met by realigning all outgoing frames to 256 bytes.
Also, compound pages of varying orders are allocated to accommodate the
outgoing contiguous buffers.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
 drivers/net/ethernet/freescale/sdk_dpaa/Kconfig    |  1 -
 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c |  9 ++---
 drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h |  5 +--
 .../net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c  | 40 ++++++++--------------
 4 files changed, 20 insertions(+), 35 deletions(-)

--- a/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/Kconfig
@@ -80,7 +80,6 @@ config FSL_DPAA_ETH_JUMBO_FRAME
 	  significantly the driver's memory footprint and may even deplete
 	  the system memory. Also, the skb truesize is altered and messages
 	  from the stack that warn against this are bypassed.
-	  This option is not available on LS1043.
 
 config FSL_DPAA_TS
 	bool "Linux compliant timestamping"
--- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.c
@@ -779,12 +779,10 @@ static int dpa_private_netdev_init(struc
 	net_dev->features |= NETIF_F_HW_ACCEL_MQ;
 
 #ifndef CONFIG_PPC
-	/* Due to the A010022 FMan errata, we can not use contig frames larger
-	 * than 4K, nor S/G frames. We need to prevent the user from setting a
-	 * large MTU. We also stop advertising S/G and GSO support.
+	/* Due to the A010022 FMan errata, we can not use S/G frames. We need
+	 * to stop advertising S/G and GSO support.
 	 */
 	if (unlikely(dpaa_errata_a010022)) {
-		net_dev->max_mtu = DPA_BP_RAW_SIZE;
 		net_dev->hw_features &= ~NETIF_F_SG;
 		net_dev->features &= ~NETIF_F_GSO;
 	}
@@ -985,9 +983,6 @@ dpaa_eth_priv_probe(struct platform_devi
 	/* We only want to use jumbo frame optimization if we actually have
 	 * L2 MAX FRM set for jumbo frames as well.
 	 */
-#ifndef CONFIG_PPC
-	if (likely(!dpaa_errata_a010022))
-#endif
 	if(fm_get_max_frm() < 9600)
 		dev_warn(dev,
 			"Invalid configuration: if jumbo frames support is on, FSL_FM_MAX_FRAME_SIZE should be set to 9600\n");
--- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth.h
@@ -672,8 +672,8 @@ static inline void _dpa_bp_free_pf(void
 /* LS1043A SoC has a HW issue regarding FMan DMA transactions; The issue
  * manifests itself at high traffic rates when frames cross 4K memory
  * boundaries or when they are not aligned to 16 bytes; For the moment, we
- * use a SW workaround to avoid frames larger than 4K or that exceed 4K
- * alignments and to realign the frames to 16 bytes.
+ * use a SW workaround that realigns frames to 256 bytes. Scatter/Gather
+ * frames aren't supported on egress.
  */
 
 #ifndef CONFIG_PPC
@@ -682,6 +682,7 @@ extern bool dpaa_errata_a010022; /* SoC
 #define HAS_DMA_ISSUE(start, size) \
 	(((uintptr_t)(start) + (size)) > \
 	 (((uintptr_t)(start) + 0x1000) & ~0xFFF))
+#define DPAA_A010022_HEADROOM	256
 #endif  /* !CONFIG_PPC */
 
 #endif	/* __DPA_H */
--- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_sg.c
@@ -407,12 +407,6 @@ static struct sk_buff *__hot contig_fd_t
 	 * warn us that the frame length is larger than the truesize. We
 	 * bypass the warning.
 	 */
-#ifndef CONFIG_PPC
-	/* We do not support Jumbo frames on LS1043 and thus we edit
-	 * the skb truesize only when the 4k errata is not present.
-	 */
-	if (likely(!dpaa_errata_a010022))
-#endif
 	skb->truesize = SKB_TRUESIZE(dpa_fd_length(fd));
 #endif
 
@@ -809,35 +803,31 @@ static struct sk_buff *a010022_realign_s
 {
 	int trans_offset = skb_transport_offset(skb);
 	int net_offset = skb_network_offset(skb);
+	int nsize, headroom, npage_order;
 	struct sk_buff *nskb = NULL;
-	int nsize, headroom;
 	struct page *npage;
 	void *npage_addr;
 
-	/* Guarantee the minimum required headroom */
-	if (skb_headroom(skb) >= priv->tx_headroom)
-		headroom = skb_headroom(skb);
-	else
-		headroom = priv->tx_headroom;
+	/* The headroom needs to accommodate our private data (64 bytes) but
+	 * we reserve 256 bytes instead to guarantee 256 data alignment.
+	 */
+	headroom = DPAA_A010022_HEADROOM;
+
+	/* For the new skb we only need the old one's data (both non-paged and
+	 * paged). We can skip the old tailroom.
+	 */
+	nsize = headroom + skb->len +
+		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 
-	npage = alloc_page(GFP_ATOMIC);
+	/* Reserve enough memory to accommodate Jumbo frames */
+	npage_order = (nsize - 1) / PAGE_SIZE;
+	npage = alloc_pages(GFP_ATOMIC | __GFP_COMP, npage_order);
 	if (unlikely(!npage)) {
 		WARN_ONCE(1, "Memory allocation failure\n");
 		return NULL;
 	}
 	npage_addr = page_address(npage);
 
-	/* For the new skb we only need the old one's data (both non-paged and
-	 * paged) and a headroom large enough to fit our private info. We can
-	 * skip the old tailroom.
-	 *
-	 * Make sure the new linearized buffer will not exceed a page's size.
-	 */
-	nsize = headroom + skb->len +
-		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-	if (unlikely(nsize > 4096))
-		goto err;
-
 	nskb = build_skb(npage_addr, nsize);
 	if (unlikely(!nskb))
 		goto err;
@@ -846,7 +836,7 @@ static struct sk_buff *a010022_realign_s
 	 * alignment.
 	 * Code borrowed and adapted from skb_copy().
 	 */
-	skb_reserve(nskb, priv->tx_headroom);
+	skb_reserve(nskb, headroom);
 	skb_put(nskb, skb->len);
 	if (skb_copy_bits(skb, 0, nskb->data, skb->len)) {
 		WARN_ONCE(1, "skb parsing failure\n");