ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 00:41:17 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
9ec3b11d37
openwrt/target/linux/mpc85xx/image/p1010.mk

97 lines
3.1 KiB
Makefile
Raw Normal View History

mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
mpc85xx: p1010: make TP-Link WDR4900 v1 build again Add the spi-loader as a pre-kernel stage, so we can lift the kernel size limit. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-27 19:00:30 +00:00
define Build/spi-loader-okli-compile
rm -rf $@.spi-loader-okli
$(CP) spi-loader $@.spi-loader-okli
$(MAKE) -C $@.spi-loader-okli \
CROSS_COMPILE="$(TARGET_CROSS)" CONFIG="$(DEVICE_NAME)"
cp "$@.spi-loader-okli/out/uImage" "$@"
rm -rf $@.spi-loader-okli
endef
define Build/spi-loader-okli
cat $(KDIR)/loader-$(1) "$@" > "$@.new"
mv "$@.new" "$@"
endef
mpc85xx: add support for Aerohive BR200-WP The following adds the Aerohive BR200-WP router to OpenWrt under the mpc85xx/p1010 subtarget. Hardware: - SoC: Freescale P1011 - NOR: Intel JS28F512M29EWH 64MB - Memory: 2x Nanya NT5TU64M16GG-AC 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - 2x LEDs - 1x Button - PoE PSE Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; setenv serverip 192.168.1.3; tftpboot 0x2004000 openwrt-mpc85xx-p1010-aerohive_br200-wp-initramfs-kernel.bin; bootm 0x2004000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NOR. Note: MAC assigns are taken from stock firmware: Name MAC addr Mode State Chan(Width) VLAN Radio Hive SSID -------- -------------- -------- ----- ----------- ---- ---------- ---------- --------- Mgt0 08ea:44XX:XXc0 - U - 1 - hive0 - Eth0 08ea:44XX:XXc0 wan U - - - - - Eth1 08ea:44XX:XXc2 access D - - - hive0 - Eth2 08ea:44XX:XXc3 access D - - - hive0 - Eth3 08ea:44XX:XXc4 access D - - - hive0 - Eth4 08ea:44XX:XXc5 access D - - - hive0 - Wifi0 08ea:44XX:XXd0 access U 1(20MHz) - radio_ng0 - - Wifi0.1 08ea:44XX:XXd4 access D 1(20MHz) - radio_ng0 hive0 - Note2: PoE PSE could be managed with `realtek-poe` package. Example port config: config port option enable '1' option id '4' option name 'lan2' option poe_plus '0' option priority '2' config port option enable '1' option id '3' option name 'lan1' option poe_plus '0' option priority '1' Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (switch@0 -> switch@10, Device's quickstart says LEDs are amber and white => add function+color properties but keep labels around, use pr_info) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-04-12 08:43:43 +00:00
define Device/aerohive_br200-wp
DEVICE_VENDOR := Aerohive
DEVICE_MODEL := BR200-WP
BLOCKSIZE := 128k
KERNEL_NAME := simpleImage.br200-wp
KERNEL := kernel-bin | uImage none
KERNEL_INITRAMFS := kernel-bin | uImage none
mpc85xx: p1010: change wrapper address of simple image devices Kernel and initramfs size grows. Now uncompressed initramfs image and regular kernel image overlaps configured area: Initramfs: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) Regular image: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) Let's change wrapper address to safe value. Tested on: TL-WDR4900, BR200-WP Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-02-19 12:39:10 +00:00
KERNEL_ENTRY := 0x1500000
KERNEL_LOADADDR := 0x1500000
mpc85xx: add support for Aerohive BR200-WP The following adds the Aerohive BR200-WP router to OpenWrt under the mpc85xx/p1010 subtarget. Hardware: - SoC: Freescale P1011 - NOR: Intel JS28F512M29EWH 64MB - Memory: 2x Nanya NT5TU64M16GG-AC 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - 2x LEDs - 1x Button - PoE PSE Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; setenv serverip 192.168.1.3; tftpboot 0x2004000 openwrt-mpc85xx-p1010-aerohive_br200-wp-initramfs-kernel.bin; bootm 0x2004000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NOR. Note: MAC assigns are taken from stock firmware: Name MAC addr Mode State Chan(Width) VLAN Radio Hive SSID -------- -------------- -------- ----- ----------- ---- ---------- ---------- --------- Mgt0 08ea:44XX:XXc0 - U - 1 - hive0 - Eth0 08ea:44XX:XXc0 wan U - - - - - Eth1 08ea:44XX:XXc2 access D - - - hive0 - Eth2 08ea:44XX:XXc3 access D - - - hive0 - Eth3 08ea:44XX:XXc4 access D - - - hive0 - Eth4 08ea:44XX:XXc5 access D - - - hive0 - Wifi0 08ea:44XX:XXd0 access U 1(20MHz) - radio_ng0 - - Wifi0.1 08ea:44XX:XXd4 access D 1(20MHz) - radio_ng0 hive0 - Note2: PoE PSE could be managed with `realtek-poe` package. Example port config: config port option enable '1' option id '4' option name 'lan2' option poe_plus '0' option priority '2' config port option enable '1' option id '3' option name 'lan1' option poe_plus '0' option priority '1' Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (switch@0 -> switch@10, Device's quickstart says LEDs are amber and white => add function+color properties but keep labels around, use pr_info) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-04-12 08:43:43 +00:00
KERNEL_SIZE := 8m
IMAGES := fdt.bin sysupgrade.bin
IMAGE/fdt.bin := append-dtb
IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
append-kernel | append-metadata
IMAGE_SIZE = 63m
endef
TARGET_DEVICES += aerohive_br200-wp
mpc85xx: add support for Enterasys WS-AP3715i Hardware -------- SoC: NXP P1010 (1x e500 @ 800MHz) RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9) FLASH: 32M NOR (Spansion S25FL256S) BTN: 1x Reset WiFi: 1x Atheros AR9590 2.4 bgn 3x3 2x Atheros AR9590 5.0 an 3x3 ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035) UART: 115200 8N1 (RJ-45 Cisco) Installation ------------ 1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in the root directory of a TFTP server and serve it at 192.168.1.66/24. 2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot by pressing Enter when prompted. Credentials are identical to the one in the APs interface. By default it is admin / new2day. 3. Alter the bootcmd in U-Boot: $ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm" $ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000; bootm 0x2000000" $ setenv bootcmd "run boot_openwrt" $ saveenv 4. Boot the initramfs image $ run ramboot_openwrt 5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: David Bauer <mail@david-bauer.net>
2023-03-18 01:28:23 +00:00
define Device/enterasys_ws-ap3715i
DEVICE_VENDOR := Enterasys
DEVICE_MODEL := WS-AP3715i
BLOCKSIZE := 64k
KERNEL_NAME := simpleImage.ws-ap3715i
mpc85xx: p1010: change wrapper address of simple image devices Kernel and initramfs size grows. Now uncompressed initramfs image and regular kernel image overlaps configured area: Initramfs: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) Regular image: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) Let's change wrapper address to safe value. Tested on: TL-WDR4900, BR200-WP Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-02-19 12:39:10 +00:00
KERNEL_ENTRY := 0x1500000
KERNEL_LOADADDR := 0x1500000
mpc85xx: add support for Enterasys WS-AP3715i Hardware -------- SoC: NXP P1010 (1x e500 @ 800MHz) RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9) FLASH: 32M NOR (Spansion S25FL256S) BTN: 1x Reset WiFi: 1x Atheros AR9590 2.4 bgn 3x3 2x Atheros AR9590 5.0 an 3x3 ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035) UART: 115200 8N1 (RJ-45 Cisco) Installation ------------ 1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in the root directory of a TFTP server and serve it at 192.168.1.66/24. 2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot by pressing Enter when prompted. Credentials are identical to the one in the APs interface. By default it is admin / new2day. 3. Alter the bootcmd in U-Boot: $ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm" $ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000; bootm 0x2000000" $ setenv bootcmd "run boot_openwrt" $ saveenv 4. Boot the initramfs image $ run ramboot_openwrt 5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: David Bauer <mail@david-bauer.net>
2023-03-18 01:28:23 +00:00
KERNEL = kernel-bin | lzma | uImage lzma
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += enterasys_ws-ap3715i
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
define Device/tplink_tl-wdr4900-v1
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := TL-WDR4900
DEVICE_VARIANT := v1
mcp85xx: Switch TP-Link TL-WDR4900 v1 to DSA This patch introduces DSA support for TP-Link TL-WDR4900 v1 switch. Swconfig driver for QCA8327 switch is removed because this router is only one device which use Qualcom swconfig switch. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Nick Hainke <vincent@systemli.org> # TP Link WDR4900 v1 (5.15)
2022-09-29 20:25:24 +00:00
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
TPLINK_HEADER_VERSION := 1
TPLINK_HWID := 0x49000001
TPLINK_HWREV := 1
TPLINK_FLASHLAYOUT := 16Mppc
KERNEL_NAME := simpleImage.tl-wdr4900-v1
KERNEL_INITRAMFS :=
mpc85xx: p1010: make TP-Link WDR4900 v1 build again Add the spi-loader as a pre-kernel stage, so we can lift the kernel size limit. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-27 19:00:30 +00:00
KERNEL := kernel-bin | uImage none -M 0x4f4b4c49 | spi-loader-okli $(1)
mpc85xx: p1010: change wrapper address of simple image devices Kernel and initramfs size grows. Now uncompressed initramfs image and regular kernel image overlaps configured area: Initramfs: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x1428688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1500000) Regular image: WRAP arch/powerpc/boot/simpleImage.br200-wp INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.tl-wdr4900-v1 INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) WRAP arch/powerpc/boot/simpleImage.ws-ap3715i INFO: Uncompressed kernel (size 0x10e0688) overlaps the address of the wrapper(0x1000000) INFO: Fixing the link_address of wrapper to (0x1100000) Let's change wrapper address to safe value. Tested on: TL-WDR4900, BR200-WP Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-02-19 12:39:10 +00:00
KERNEL_ENTRY := 0x1500000
KERNEL_LOADADDR := 0x1500000
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
SUPPORTED_DEVICES += tl-wdr4900-v1
mpc85xx: p1010: make TP-Link WDR4900 v1 build again Add the spi-loader as a pre-kernel stage, so we can lift the kernel size limit. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-03-27 19:00:30 +00:00
COMPILE := loader-$(1)
COMPILE/loader-$(1) := spi-loader-okli-compile
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
ARTIFACTS := fdt.bin
ARTIFACT/fdt.bin := append-dtb
mpc85xx: remove fdt.bin image When converting the fdt binary to be created as an artifact, the image receipt was dropped but the entry in the target images list was not. Fixes commit 1e41de2f48e2 ("mpc85xx: convert TL-WDR4900 v1 to simpleImage") Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-26 12:16:01 +00:00
IMAGES := factory.bin sysupgrade.bin
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append-metadata
IMAGE/factory.bin := tplink-v1-image factory
endef
TARGET_DEVICES += tplink_tl-wdr4900-v1
mpc85xx: add support for Watchguard Firebox T10 Hardware -------- SoC: Freescale P1010 RAM: 512MB FLASH: 1 MB SPI-NOR 512 MB NAND ETH: 3x Gigabite Ethernet (Atheros AR8033) SERIAL: Cisco RJ-45 (115200 8N1) RTC: Battery-Backed RTC (I2C) Installation ------------ 1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI programmer. The SHA1 hash for the U-Boot password is currently unknown. A tool for patching U-Boot is available at https://github.com/blocktrron/t10-uboot-patcher/ You can also patch the unknown password yourself. The SHA1 hash is E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA 2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears. The patched password is '1234' (without quotation marks) 3. Download the OpenWrt initramfs image. Copy it to a TFTP server reachable at 10.0.1.13/24 and rename it to uImage. 4. Connect the TFTP server to ethernet port 0 of the Watchguard T10. 5. Download and boot the initramfs image by entering "tftpboot; bootm;" in U-Boot. 6. After OpenWrt booted, create a UBI volume on the old data partition. The "ubi" mtd partition should be mtd7, check this using $ cat /proc/mtd Create a UBI partition by executing $ ubiformat /dev/mtd7 -y 7. Increase the loadable kernel-size of U-Boot by executing $ fw_setenv SysAKernSize 800000 8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using scp. Install the image by using sysupgrade: $ sysupgrade -n <path-to-sysupgrade> Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might have to change the ethernet-port. 9. OpenWrt should now boot from the internal NAND. Enjoy. Signed-off-by: David Bauer <mail@david-bauer.net>
2023-02-18 01:06:54 +00:00
define Device/watchguard_firebox-t10
DEVICE_VENDOR := Watchguard
DEVICE_MODEL := Firebox T10
DEVICE_PACKAGES := kmod-rtc-s35390a kmod-eeprom-at24
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += watchguard_firebox-t10
mpc85xx: restructure image receipts Move the image receipts into separate per-subtarget files like it is done on most other targets. Signed-off-by: David Bauer <mail@david-bauer.net>
2020-05-18 19:10:45 +00:00
define Device/sophos_red-15w-rev1
DEVICE_VENDOR := Sophos
DEVICE_MODEL := RED 15w
DEVICE_VARIANT := Rev.1
# Original firmware uses a dedicated DTB-partition.
# The bootloader however supports FIT-images.
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += sophos_red-15w-rev1
Reference in New Issue Copy Permalink