openwrt/target/linux/ramips/dts/mt7621_dlink_dir-1960-a1.dts

57 lines
1.1 KiB
Plaintext
Raw Normal View History

ramips: add support for D-Link DIR-1960 A1 This patch adds support for D-Link DIR-1960 A1. Given the similarity with the DIR-1760/2660 A1, this patch also introduces a common DTSI which can be shared with these devices, with support to be added in future commits. Specifications: * Board: AP-MTKH7-0002 * SoC: MediaTek MT7621AT * RAM: 256 MB (DDR3) * Flash: 128 MB (NAND) * WiFi: MediaTek MT7615N (x2) * Switch: 1 WAN, 4 LAN (Gigabit) * Ports: 1 USB 3.0 * Buttons: Reset, WPS * LEDs: Power (white/orange), Internet (white/orange), WiFi 2.4G (white), WiFi 5G (white), USB 3.0 (white) Notes: * WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips Installation: * D-Link Recovery GUI: power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the power LED starts flashing orange, manually assign a static IP address under the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1 * Some modern browsers may have problems flashing via the Recovery GUI, if that occurs consider uploading the firmware through cURL: curl -v -i -F "firmware=@file.bin" 192.168.0.1 MAC addresses: lan factory 0xe000 *:EB (label) wan factory 0xe006 *:EE 2.4 factory 0xe000 +1 *:EC 5.0 factory 0xe000 +2 *:ED Seems like vendor didn't replace the dummy entrys in the calibration data. Signed-off-by: Josh Bendavid <joshbendavid@gmail.com> [fix whitespace issues, create patch to merge DIR-1960 first, move special WiFi MAC settings to DTS, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-14 15:39:21 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621_dlink_dir-xx60-a1.dtsi"
/ {
compatible = "dlink,dir-1960-a1", "mediatek,mt7621-soc";
model = "D-Link DIR-1960 A1";
aliases {
led-boot = &led_power_orange;
led-failsafe = &led_power_white;
led-running = &led_power_white;
led-upgrade = &led_net_orange;
};
leds {
compatible = "gpio-leds";
led_power_orange: power_orange {
label = "dir-1960-a1:orange:power";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
led_power_white: power_white {
label = "dir-1960-a1:white:power";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
led_net_orange: net_orange {
label = "dir-1960-a1:orange:net";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
net_white {
label = "dir-1960-a1:white:net";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
usb_white {
label = "dir-1960-a1:white:usb";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>;
linux,default-trigger = "usbport";
};
};
};
&wifi0 {
mtd-mac-address = <&factory 0xe000>;
mtd-mac-address-increment = <1>;
};
&wifi1 {
mtd-mac-address = <&factory 0xe000>;
mtd-mac-address-increment = <2>;
};