mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-13 22:23:38 +00:00
ramips: add support for D-Link DIR-1960 A1
This patch adds support for D-Link DIR-1960 A1. Given the similarity with
the DIR-1760/2660 A1, this patch also introduces a common DTSI which can
be shared with these devices, with support to be added in future commits.
Specifications:
* Board: AP-MTKH7-0002
* SoC: MediaTek MT7621AT
* RAM: 256 MB (DDR3)
* Flash: 128 MB (NAND)
* WiFi: MediaTek MT7615N (x2)
* Switch: 1 WAN, 4 LAN (Gigabit)
* Ports: 1 USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (white/orange), Internet (white/orange), WiFi 2.4G (white),
WiFi 5G (white), USB 3.0 (white)
Notes:
* WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips
Installation:
* D-Link Recovery GUI: power down the router, press and hold the reset
button, then re-plug it. Keep the reset button pressed until the power
LED starts flashing orange, manually assign a static IP address under
the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1
* Some modern browsers may have problems flashing via the Recovery GUI,
if that occurs consider uploading the firmware through cURL:
curl -v -i -F "firmware=@file.bin" 192.168.0.1
MAC addresses:
lan factory 0xe000 *:EB (label)
wan factory 0xe006 *:EE
2.4 factory 0xe000 +1 *:EC
5.0 factory 0xe000 +2 *:ED
Seems like vendor didn't replace the dummy entrys in the calibration data.
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
[fix whitespace issues, create patch to merge DIR-1960 first, move
special WiFi MAC settings to DTS, extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Josh Bendavid
Adrian Schmutzler
parent
8126e572dd
commit
11bff24b3e
57
target/linux/ramips/dts/mt7621_dlink_dir-1960-a1.dts
Normal file
57
target/linux/ramips/dts/mt7621_dlink_dir-1960-a1.dts
Normal file
@ -0,0 +1,57 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621_dlink_dir-xx60-a1.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "dlink,dir-1960-a1", "mediatek,mt7621-soc";
|
||||
model = "D-Link DIR-1960 A1";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_orange;
|
||||
led-failsafe = &led_power_white;
|
||||
led-running = &led_power_white;
|
||||
led-upgrade = &led_net_orange;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power_orange: power_orange {
|
||||
label = "dir-1960-a1:orange:power";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_white: power_white {
|
||||
label = "dir-1960-a1:white:power";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_net_orange: net_orange {
|
||||
label = "dir-1960-a1:orange:net";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
net_white {
|
||||
label = "dir-1960-a1:white:net";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb_white {
|
||||
label = "dir-1960-a1:white:usb";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&xhci_ehci_port1>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
mtd-mac-address-increment = <2>;
|
||||
};
|
||||
163
target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi
Normal file
163
target/linux/ramips/dts/mt7621_dlink_dir-xx60-a1.dtsi
Normal file
@ -0,0 +1,163 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "config";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@100000 {
|
||||
label = "factory";
|
||||
reg = <0x100000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "config2";
|
||||
reg = <0x140000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "firmware";
|
||||
compatible = "sge,uimage";
|
||||
reg = <0x180000 0x2800000>;
|
||||
};
|
||||
|
||||
partition@2980000 {
|
||||
label = "private";
|
||||
reg = <0x2980000 0x2000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@4980000 {
|
||||
label = "firmware2";
|
||||
compatible = "sge,uimage";
|
||||
reg = <0x4980000 0x2800000>;
|
||||
};
|
||||
|
||||
partition@7180000 {
|
||||
label = "mydlink";
|
||||
reg = <0x7180000 0x600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7780000 {
|
||||
label = "reserved";
|
||||
reg = <0x7780000 0x880000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi0: wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
|
||||
led {
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi1: wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
|
||||
led {
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
mtd-mac-address = <&factory 0xe006>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "uart3", "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
@ -232,6 +232,29 @@ define Device/dlink_dir-8xx-a1
|
||||
check-size
|
||||
endef
|
||||
|
||||
define Device/dlink_dir-xx60-a1
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGE_SIZE := 40960k
|
||||
UBINIZE_OPTS := -E 5
|
||||
DEVICE_VENDOR := D-Link
|
||||
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware wpad-basic \
|
||||
kmod-usb3 kmod-usb-ledtrig-usbport
|
||||
KERNEL := $$(KERNEL) | uimage-padhdr 96
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
||||
check-size
|
||||
endef
|
||||
|
||||
define Device/dlink_dir-1960-a1
|
||||
$(Device/dlink_dir-xx60-a1)
|
||||
DEVICE_MODEL := DIR-1960
|
||||
DEVICE_VARIANT := A1
|
||||
endef
|
||||
TARGET_DEVICES += dlink_dir-1960-a1
|
||||
|
||||
define Device/dlink_dir-860l-b1
|
||||
$(Device/seama)
|
||||
BLOCKSIZE := 64k
|
||||
|
||||
@ -26,6 +26,9 @@ d-team,pbr-m1|\
|
||||
gehua,ghl-r-001)
|
||||
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan"
|
||||
;;
|
||||
dlink,dir-1960-a1)
|
||||
ucidef_set_led_netdev "wan" "wan" "$boardname:white:net" "wan"
|
||||
;;
|
||||
dlink,dir-860l-b1|\
|
||||
dlink,dir-867-a1|\
|
||||
dlink,dir-878-a1|\
|
||||
|
||||
@ -44,6 +44,7 @@ platform_do_upgrade() {
|
||||
case "$board" in
|
||||
asus,rt-ac65p|\
|
||||
asus,rt-ac85p|\
|
||||
dlink,dir-1960-a1|\
|
||||
hiwifi,hc5962|\
|
||||
linksys,ea7300-v1|\
|
||||
linksys,ea7500-v2|\
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user