openwrt/target/linux/layerscape/patches-5.4/820-usb-0015-MLK-17380-4-usb-host-xhci-add-EH-SINGLE_STEP_SET_FEA.patch

From 6a313b6072925ab757688328b9f91b16d5a39bb3 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@nxp.com>
Date: Fri, 9 Feb 2018 10:11:32 +0800
Subject: [PATCH] MLK-17380-4 usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE
 Test for USB2

This function is similar with EHCI's, but implemented using XHCI.
The USB2 host needs to send SETUP packet first, then wait 15
seconds before DATA (IN) + STATUS stage.

It is needed at USB Certification test for Embedded Host 2.0, and
the detail is at CH6.4.1.1 of On-The-Go and Embedded Host Supplement
to the USB Revision 2.0 Specification

Acked-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
(cherry picked from commit 8d46e3bca527a5d899446d3858274fb5cbab1a1e)
---
 drivers/usb/host/xhci-hub.c  |   9 ++++
 drivers/usb/host/xhci-ring.c | 123 +++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.c      |   1 +
 drivers/usb/host/xhci.h      |  10 ++++
 4 files changed, 143 insertions(+)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1420,6 +1420,15 @@ int xhci_hub_control(struct usb_hcd *hcd
 			/* 4.19.6 Port Test Modes (USB2 Test Mode) */
 			if (hcd->speed != HCD_USB2)
 				goto error;
+#ifdef CONFIG_USB_HCD_TEST_MODE
+			if (test_mode == EHSET_TEST_SINGLE_STEP_SET_FEATURE) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				retval = ehset_single_step_set_feature(hcd,
+								wIndex + 1);
+				spin_lock_irqsave(&xhci->lock, flags);
+				break;
+			}
+#endif
 			if (test_mode > TEST_FORCE_EN || test_mode < TEST_J)
 				goto error;
 			retval = xhci_enter_test_mode(xhci, test_mode, wIndex,
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3624,6 +3624,129 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
 	return 0;
 }
 
+#ifdef CONFIG_USB_HCD_TEST_MODE
+/*
+ * This function prepare TRBs and submits them for the
+ * SINGLE_STEP_SET_FEATURE Test.
+ * This is done in two parts: first SETUP req for GetDesc is sent then
+ * 15 seconds later, the IN stage for GetDesc starts to req data from dev
+ *
+ * is_setup : argument decides which of the two stage needs to be
+ * performed; TRUE - SETUP and FALSE - IN+STATUS
+ * Returns 0 if success
+ */
+int xhci_submit_single_step_set_feature(struct usb_hcd *hcd,
+	struct urb *urb, int is_setup)
+{
+	int slot_id;
+	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
+	int ret;
+	struct usb_ctrlrequest *setup;
+	struct xhci_generic_trb *start_trb;
+	int start_cycle;
+	u32 field, length_field, remainder;
+	struct urb_priv *urb_priv;
+	struct xhci_td *td;
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+
+	/* urb_priv will be free after transcation has completed */
+	urb_priv = kzalloc(sizeof(struct urb_priv) +
+			sizeof(struct xhci_td), GFP_KERNEL);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	td = &urb_priv->td[0];
+	urb_priv->num_tds = 1;
+	urb_priv->num_tds_done = 0;
+	urb->hcpriv = urb_priv;
+
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep_ring) {
+		ret = -EINVAL;
+		goto free_priv;
+	}
+
+	slot_id = urb->dev->slot_id;
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+
+	setup = (struct usb_ctrlrequest *) urb->setup_packet;
+	if (is_setup) {
+		ret = prepare_transfer(xhci, xhci->devs[slot_id],
+				ep_index, urb->stream_id,
+				1, urb, 0, GFP_KERNEL);
+		if (ret < 0)
+			goto free_priv;
+
+		start_trb = &ep_ring->enqueue->generic;
+		start_cycle = ep_ring->cycle_state;
+		/* Save the DMA address of the last TRB in the TD */
+		td->last_trb = ep_ring->enqueue;
+		field = TRB_IOC | TRB_IDT | TRB_TYPE(TRB_SETUP) | start_cycle;
+		/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+		if ((xhci->hci_version >= 0x100) ||
+				(xhci->quirks & XHCI_MTK_HOST))
+			field |= TRB_TX_TYPE(TRB_DATA_IN);
+
+		queue_trb(xhci, ep_ring, false,
+			  setup->bRequestType | setup->bRequest << 8 |
+			  le16_to_cpu(setup->wValue) << 16,
+			  le16_to_cpu(setup->wIndex) |
+			  le16_to_cpu(setup->wLength) << 16,
+			  TRB_LEN(8) | TRB_INTR_TARGET(0),
+			  /* Immediate data in pointer */
+			  field);
+		giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+				start_cycle, start_trb);
+		return 0;
+	}
+
+	ret = prepare_transfer(xhci, xhci->devs[slot_id],
+			ep_index, urb->stream_id,
+			2, urb, 0, GFP_KERNEL);
+	if (ret < 0)
+		goto free_priv;
+
+	start_trb = &ep_ring->enqueue->generic;
+	start_cycle = ep_ring->cycle_state;
+	field = TRB_ISP | TRB_TYPE(TRB_DATA);
+
+	remainder = xhci_td_remainder(xhci, 0,
+				   urb->transfer_buffer_length,
+				   urb->transfer_buffer_length,
+				   urb, 1);
+
+	length_field = TRB_LEN(urb->transfer_buffer_length) |
+		TRB_TD_SIZE(remainder) |
+		TRB_INTR_TARGET(0);
+
+	if (urb->transfer_buffer_length > 0) {
+		field |= TRB_DIR_IN;
+		queue_trb(xhci, ep_ring, true,
+				lower_32_bits(urb->transfer_dma),
+				upper_32_bits(urb->transfer_dma),
+				length_field,
+				field | ep_ring->cycle_state);
+	}
+
+	td->last_trb = ep_ring->enqueue;
+	field = TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state;
+	queue_trb(xhci, ep_ring, false,
+			0,
+			0,
+			TRB_INTR_TARGET(0),
+			field);
+
+	giveback_first_trb(xhci, slot_id, ep_index, 0,
+			start_cycle, start_trb);
+
+	return 0;
+free_priv:
+	xhci_urb_free_priv(urb_priv);
+	return ret;
+}
+#endif /* CONFIG_USB_HCD_TEST_MODE */
+
 /*
  * The transfer burst count field of the isochronous TRB defines the number of
  * bursts that are required to move all packets in this TD.  Only SuperSpeed
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5385,6 +5385,7 @@ static const struct hc_driver xhci_hc_dr
 	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
 	.find_raw_port_number =	xhci_find_raw_port_number,
 	.clear_tt_buffer_complete = xhci_clear_tt_buffer_complete,
+	.submit_single_step_set_feature	= xhci_submit_single_step_set_feature,
 };
 
 void xhci_init_driver(struct hc_driver *drv,
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2154,6 +2154,16 @@ int xhci_find_raw_port_number(struct usb
 struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd);
 
 void xhci_hc_died(struct xhci_hcd *xhci);
+#ifdef CONFIG_USB_HCD_TEST_MODE
+int xhci_submit_single_step_set_feature(struct usb_hcd *hcd,
+	struct urb *urb, int is_setup);
+#else
+static inline int xhci_submit_single_step_set_feature(struct usb_hcd *hcd,
+	struct urb *urb, int is_setup)
+{
+	return 0;
+}
+#endif
 
 #ifdef CONFIG_PM
 int xhci_bus_suspend(struct usb_hcd *hcd);