openwrt/include/image-commands.mk

618 lines
18 KiB
Makefile
Raw Normal View History

# Build commands that can be called from Device/* templates
IMAGE_KERNEL = $(word 1,$^)
IMAGE_ROOTFS = $(word 2,$^)
define ModelNameLimit16
$(shell printf %.16s "$(word 2, $(subst _, ,$(1)))")
endef
define rootfs_align
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
endef
define Build/append-dtb
cat $(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb >> $@
endef
define Build/append-dtb-elf
$(TARGET_CROSS)objcopy \
--set-section-flags=.appended_dtb=alloc,contents \
--update-section \
.appended_dtb=$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@
endef
define Build/append-kernel
dd if=$(IMAGE_KERNEL) >> $@
endef
define Build/package-kernel-ubifs
mkdir $@.kernelubifs
cp $@ $@.kernelubifs/kernel
$(STAGING_DIR_HOST)/bin/mkfs.ubifs \
$(KERNEL_UBIFS_OPTS) \
-r $@.kernelubifs $@
rm -r $@.kernelubifs
endef
define Build/append-image
cp "$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1)" "$@.stripmeta"
fwtool -s /dev/null -t "$@.stripmeta" || :
fwtool -i /dev/null -t "$@.stripmeta" || :
dd if="$@.stripmeta" >> "$@"
rm "$@.stripmeta"
endef
ifdef IB
define Build/append-image-stage
dd if=$(STAGING_DIR_IMAGE)/$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))-$(DEVICE_NAME)-$(1) >> $@
endef
else
define Build/append-image-stage
cp "$(BIN_DIR)/$(DEVICE_IMG_PREFIX)-$(1)" "$@.stripmeta"
fwtool -s /dev/null -t "$@.stripmeta" || :
fwtool -i /dev/null -t "$@.stripmeta" || :
mkdir -p "$(STAGING_DIR_IMAGE)"
dd if="$@.stripmeta" of="$(STAGING_DIR_IMAGE)/$(BOARD)$(if $(SUBTARGET),-$(SUBTARGET))-$(DEVICE_NAME)-$(1)"
dd if="$@.stripmeta" >> "$@"
rm "$@.stripmeta"
endef
endif
compat_version=$(if $(DEVICE_COMPAT_VERSION),$(DEVICE_COMPAT_VERSION),1.0)
json_quote=$(subst ','\'',$(subst ",\",$(1)))
#")')
legacy_supported_message=$(SUPPORTED_DEVICES) - Image version mismatch: image $(compat_version), \
device 1.0. Please wipe config during upgrade (force required) or reinstall. \
$(if $(DEVICE_COMPAT_MESSAGE),Reason: $(DEVICE_COMPAT_MESSAGE),Please check documentation ...)
metadata_devices=$(if $(1),$(subst "$(space)","$(comma)",$(strip $(foreach v,$(1),"$(call json_quote,$(v))"))))
metadata_json = \
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
"metadata_version": "1.1", \
"compat_version": "$(call json_quote,$(compat_version))", \
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
"version": { \
"dist": "$(call json_quote,$(VERSION_DIST))", \
"version": "$(call json_quote,$(VERSION_NUMBER))", \
"revision": "$(call json_quote,$(REVISION))", \
"target": "$(call json_quote,$(TARGETID))", \
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
} \
}'
ipq40xx: add support for the ZyXEL NBG6617 This patch adds support for ZyXEL NBG6617 Hardware highlights: SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz NOR: 32 MiB Macronix MX25L25635F ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN) USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button, WIFI/Rfkill Togglebutton, WPS Button LEDS: Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS Serial: WARNING: The serial port needs a TTL/RS-232 3.3v level converter! The Serial setting is 115200-8-N-1. The 1x4 .1" header comes pre-soldered. Pinout: 1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX first install / debricking / restore stock: 0. Have a PC running a tftp-server @ 192.168.1.99/24 1. connect the PC to any LAN-Ports 2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file into the tftp-server root directory and rename it to just "ras.bin". 3. power-cycle the router and hold down the the WPS button (for 30sek) 4. Wait (for a long time - the serial console provides some progress reports. The u-boot says it best: "Please be patient". 5. Once the power LED starts to flashes slowly and the USB + WPS LEDs flashes fast at the same time. You have to reboot the device and it should then come right up. Installation via Web-UI: 0. Connect a PC to the powered-on router. It will assign your PC a IP-address via DHCP 1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234) 2. Go to the "Expert Mode" 3. Under "Maintenance", select "Firmware-Upgrade" 4. Upload the OpenWRT factory image 5. Wait for the Device to finish. It will reboot into OpenWRT without any additional actions needed. To open the ZyXEL NBG6617: 0. remove the four rubber feet glued on the backside 1. remove the four philips screws and pry open the top cover (by applying force between the plastic top housing from the backside/lan-port side) Access the real u-boot shell: ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02" When the device is starting up, the user can enter the the loader shell by simply pressing a key within the 3 seconds once the following string appears on the serial console: | Hit any key to stop autoboot: 3 The user is then dropped to a locked shell. |NBG6617> HELP |ATEN x[,y] set BootExtension Debug Flag (y=password) |ATSE x show the seed of password generator |ATSH dump manufacturer related data in ROM |ATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations) |ATGO boot up whole system |ATUR x upgrade RAS image (filename) |NBG6617> In order to escape/unlock a password challenge has to be passed. Note: the value is dynamic! you have to calculate your own! First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env) to get the challange value/seed. |NBG6617> ATSE NBG6617 |012345678901 This seed/value can be converted to the password with the help of this bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors): - tool.sh - ror32() { echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) } v="0x$1" a="0x${v:2:6}" b=$(( $a + 0x10F0A563)) c=$(( 0x${v:12:14} & 7 )) p=$(( $(ror32 $b $c) ^ $a )) printf "ATEN 1,%X\n" $p - end of tool.sh - |# bash ./tool.sh 012345678901 | |ATEN 1,879C711 copy and paste the result into the shell to unlock zloader. |NBG6617> ATEN 1,0046B0017430 If the entered code was correct the shell will change to use the ATGU command to enter the real u-boot shell. |NBG6617> ATGU |NBG6617# Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: David Bauer <mail@david-bauer.net>
2018-06-21 12:24:59 +00:00
define Build/append-metadata
$(if $(SUPPORTED_DEVICES),-echo $(call metadata_json) | fwtool -I - $@)
sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
ucert -A -c "$@.ucert" -x "$@.sig" ;\
fwtool -S "$@.ucert" "$@" ;\
}
endef
define Build/append-rootfs
dd if=$(IMAGE_ROOTFS) >> $@
endef
define Build/append-squashfs-fakeroot-be
rm -rf $@.fakefs $@.fakesquashfs
mkdir $@.fakefs
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$@.fakefs $@.fakesquashfs \
-noappend -root-owned -be -nopad -b 65536 \
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
cat $@.fakesquashfs >> $@
endef
define Build/append-squashfs4-fakeroot
rm -rf $@.fakefs $@.fakesquashfs
mkdir $@.fakefs
$(STAGING_DIR_HOST)/bin/mksquashfs4 \
$@.fakefs $@.fakesquashfs \
-nopad -noappend -root-owned
cat $@.fakesquashfs >> $@
endef
define Build/append-string
echo -n $(1) >> $@
endef
define Build/append-ubi
sh $(TOPDIR)/scripts/ubinize-image.sh \
$(if $(UBOOTENV_IN_UBI),--uboot-env) \
$(if $(KERNEL_IN_UBI),--kernel $(IMAGE_KERNEL)) \
$(foreach part,$(UBINIZE_PARTS),--part $(part)) \
--rootfs $(IMAGE_ROOTFS) \
$@.tmp \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
cat $@.tmp >> $@
rm $@.tmp
endef
define Build/ubinize-kernel
cp $@ $@.tmp
sh $(TOPDIR)/scripts/ubinize-image.sh \
--kernel $@.tmp \
$@ \
-p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
$(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
$(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
$(UBINIZE_OPTS)
rm $@.tmp
endef
define Build/append-uboot
dd if=$(UBOOT_PATH) >> $@
endef
# append a fake/empty uImage header, to fool bootloaders rootfs integrity check
# for example
define Build/append-uImage-fakehdr
$(eval type=$(word 1,$(1)))
$(eval magic=$(word 2,$(1)))
touch $@.fakehdr
$(STAGING_DIR_HOST)/bin/mkimage \
-A $(LINUX_KARCH) -O linux -T $(type) -C none \
-n '$(VERSION_DIST) fake $(type)' \
$(if $(magic),-M $(magic)) \
-d $@.fakehdr \
-s \
$@.fakehdr
cat $@.fakehdr >> $@
endef
define Build/buffalo-dhp-image
$(STAGING_DIR_HOST)/bin/mkdhpimg $@ $@.new
mv $@.new $@
endef
define Build/buffalo-enc
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(eval args=$(wordlist 3,$(words $(1)),$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-enc \
-p $(product) -v $(version) $(args) \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/buffalo-enc-tag
$(call Build/buffalo-enc,'' '' -S 152 $(1))
endef
define Build/buffalo-tag-dhp
$(eval product=$(word 1,$(1)))
$(eval region=$(word 2,$(1)))
$(eval language=$(word 3,$(1)))
$(STAGING_DIR_HOST)/bin/buffalo-tag \
-d 0x01000000 -w 1 \
-a $(BUFFALO_TAG_PLATFORM) \
-v $(BUFFALO_TAG_VERSION) -m $(BUFFALO_TAG_MINOR) \
-b $(product) -p $(product) \
-r $(region) -r $(region) -l $(language) \
-I $@ -o $@.new
mv $@.new $@
endef
define Build/check-size
@imagesize="$$(stat -c%s $@)"; \
limitsize="$$(($(subst k,* 1024,$(subst m, * 1024k,$(if $(1),$(1),$(IMAGE_SIZE))))))"; \
[ $$limitsize -ge $$imagesize ] || { \
$(call ERROR_MESSAGE, WARNING: Image file $@ is too big: $$imagesize > $$limitsize); \
rm -f $@; \
}
endef
define Build/copy-file
cat "$(1)" > "$@"
endef
define Build/edimax-header
$(STAGING_DIR_HOST)/bin/mkedimaximg -i $@ -o $@.new $(1)
@mv $@.new $@
endef
define Build/elecom-product-header
$(eval product=$(word 1,$(1)))
$(eval fw=$(if $(word 2,$(1)),$(word 2,$(1)),$@))
( \
echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
echo -n "0.00" | dd bs=16 count=1 conv=sync; \
dd if=$(fw); \
) > $(fw).new
mv $(fw).new $(fw)
endef
define Build/elecom-wrc-gs-factory
$(eval product=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(eval hash_opt=$(word 3,$(1)))
$(MKHASH) md5 $(hash_opt) $@ >> $@
( \
echo -n "ELECOM $(product) v$(version)" | \
dd bs=32 count=1 conv=sync; \
dd if=$@; \
) > $@.new
mv $@.new $@
endef
define Build/elx-header
$(eval hw_id=$(word 1,$(1)))
$(eval xor_pattern=$(word 2,$(1)))
( \
echo -ne "\x00\x00\x00\x00\x00\x00\x00\x03" | \
dd bs=42 count=1 conv=sync; \
hw_id="$(hw_id)"; \
echo -ne "\x$${hw_id:0:2}\x$${hw_id:2:2}\x$${hw_id:4:2}\x$${hw_id:6:2}" | \
dd bs=20 count=1 conv=sync; \
echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
dd bs=8 count=1 conv=sync; \
echo -ne "$$($(MKHASH) md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
dd bs=58 count=1 conv=sync; \
) > $(KDIR)/tmp/$(DEVICE_NAME).header
$(call Build/xor-image,-p $(xor_pattern) -x)
cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new
mv $@.new $@
rm -rf $(KDIR)/tmp/$(DEVICE_NAME).header
endef
define Build/eva-image
$(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
mv $@.new $@
endef
define Build/initrd_compression
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_BZIP2),.bzip2) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_GZIP),.gzip) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZ4),.lz4) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA),.lzma) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_LZO),.lzo) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_XZ),.xz) \
$(if $(CONFIG_TARGET_INITRAMFS_COMPRESSION_ZSTD),.zstd)
endef
define Build/fit
$(TOPDIR)/scripts/mkits.sh \
-D $(DEVICE_NAME) -o $@.its -k $@ \
-C $(word 1,$(1)) \
$(if $(word 2,$(1)),\
$(if $(findstring 11,$(if $(DEVICE_DTS_OVERLAY),1)$(if $(findstring $(KERNEL_BUILD_DIR)/image-,$(word 2,$(1))),,1)), \
-d $(KERNEL_BUILD_DIR)/image-$$(basename $(word 2,$(1))), \
-d $(word 2,$(1)))) \
image: add support for building FIT image with filesystem Allow for single (external-data) FIT image to hold kernel, dtb and squashfs. In that way, the bootloader verifies the system integrity including the rootfs, because what's the point of checking that the hash of the kernel is correct if it won't boot in case of squashfs being corrupted? Better allow bootloader to check everything needed to make it at least up to failsafe mode. As a positive side effect this change also makes the sysupgrade process on nand potentially much easier as it is now. In short: mkimage has a parameter '-E' which allows generating FIT images with 'external' data rather than embedding the data into the device-tree blob itself. In this way, the FIT structure itself remains small and can be parsed easily (rather than having to page around megabytes of image content). This patch makes use of that and adds support for adding sub-images of type 'filesystem' which are used to store the squashfs. Now U-Boot can verify the whole OS and the new partition parsers added in the Linux kernel can detect the filesystem sub-images, create partitions for them, and select the active rootfs volume based on the configuration in FIT (passing configuration via device tree could be implemented easily at a later stage). This new FIT partition parser works for NOR flash (on top of mtdblock), NAND flash (on top of ubiblock) as well as classic block devices (ie. eMMC, SDcard, SATA, NVME, ...). It could even be used to mount such FIT images via `losetup -P` on a user PC if this patch gets included in Linux upstream one day ;) Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-15 14:37:17 +00:00
$(if $(findstring with-rootfs,$(word 3,$(1))),-r $(IMAGE_ROOTFS)) \
$(if $(findstring with-initrd,$(word 3,$(1))), \
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE), \
-i $(KERNEL_BUILD_DIR)/initrd.cpio$(strip $(call Build/initrd_compression)))) \
-a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
$(if $(DEVICE_FDT_NUM),-n $(DEVICE_FDT_NUM)) \
$(if $(DEVICE_DTS_DELIMITER),-l $(DEVICE_DTS_DELIMITER)) \
$(if $(DEVICE_DTS_LOADADDR),-s $(DEVICE_DTS_LOADADDR)) \
$(if $(DEVICE_DTS_OVERLAY),$(foreach dtso,$(DEVICE_DTS_OVERLAY), -O $(dtso):$(KERNEL_BUILD_DIR)/image-$(dtso).dtb)) \
-c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config-1") \
-A $(LINUX_KARCH) -v $(LINUX_VERSION)
image: add support for building FIT image with filesystem Allow for single (external-data) FIT image to hold kernel, dtb and squashfs. In that way, the bootloader verifies the system integrity including the rootfs, because what's the point of checking that the hash of the kernel is correct if it won't boot in case of squashfs being corrupted? Better allow bootloader to check everything needed to make it at least up to failsafe mode. As a positive side effect this change also makes the sysupgrade process on nand potentially much easier as it is now. In short: mkimage has a parameter '-E' which allows generating FIT images with 'external' data rather than embedding the data into the device-tree blob itself. In this way, the FIT structure itself remains small and can be parsed easily (rather than having to page around megabytes of image content). This patch makes use of that and adds support for adding sub-images of type 'filesystem' which are used to store the squashfs. Now U-Boot can verify the whole OS and the new partition parsers added in the Linux kernel can detect the filesystem sub-images, create partitions for them, and select the active rootfs volume based on the configuration in FIT (passing configuration via device tree could be implemented easily at a later stage). This new FIT partition parser works for NOR flash (on top of mtdblock), NAND flash (on top of ubiblock) as well as classic block devices (ie. eMMC, SDcard, SATA, NVME, ...). It could even be used to mount such FIT images via `losetup -P` on a user PC if this patch gets included in Linux upstream one day ;) Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-15 14:37:17 +00:00
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage $(if $(findstring external,$(word 3,$(1))),\
-E -B 0x1000 $(if $(findstring static,$(word 3,$(1))),-p 0x1000)) -f $@.its $@.new
@mv $@.new $@
endef
define Build/libdeflate-gzip
$(STAGING_DIR_HOST)/bin/libdeflate-gzip -f -12 -c $@ $(1) > $@.new
@mv $@.new $@
endef
define Build/gzip
$(STAGING_DIR_HOST)/bin/gzip -f -9n -c $@ $(1) > $@.new
@mv $@.new $@
endef
define Build/gzip-filename
@mkdir -p $@.tmp
@cp $@ $@.tmp/$(word 1,$(1))
$(if $(SOURCE_DATE_EPOCH),touch -hcd "@$(SOURCE_DATE_EPOCH)" $@.tmp/$(word 1,$(1)) $(word 2,$(1)))
$(STAGING_DIR_HOST)/bin/gzip -f -9 -N -c $@.tmp/$(word 1,$(1)) $(word 2,$(1)) > $@.new
@mv $@.new $@
@rm -rf $@.tmp
endef
define Build/install-dtb
$(call locked, \
$(foreach dts,$(DEVICE_DTS), \
$(CP) \
$(DTS_DIR)/$(dts).dtb \
$(BIN_DIR)/$(IMG_PREFIX)-$(dts).dtb; \
), \
install-dtb-$(IMG_PREFIX) \
)
endef
define Build/iptime-crc32
$(STAGING_DIR_HOST)/bin/iptime-crc32 $(1) $@ $@.new
mv $@.new $@
endef
define Build/iptime-naspkg
$(STAGING_DIR_HOST)/bin/iptime-naspkg $(1) $@ $@.new
mv $@.new $@
endef
define Build/jffs2
rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 && \
mkdir -p $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$$(dirname $(1)) && \
cp $@ $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/$(1) && \
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 --pad \
$(if $(CONFIG_BIG_ENDIAN),--big-endian,--little-endian) \
--squash-uids -v -e $(patsubst %k,%KiB,$(BLOCKSIZE)) \
-o $@.new \
-d $(KDIR_TMP)/$(DEVICE_NAME)/jffs2 \
2>&1 1>/dev/null | awk '/^.+$$$$/' && \
$(STAGING_DIR_HOST)/bin/padjffs2 $@.new -J $(patsubst %k,,$(BLOCKSIZE))
-rm -rf $(KDIR_TMP)/$(DEVICE_NAME)/jffs2/
@mv $@.new $@
endef
define Build/kernel2minor
$(eval temp_file := $(shell mktemp))
cp $@ $(temp_file)
kernel2minor -k $(temp_file) -r $(temp_file).new $(1)
mv $(temp_file).new $@
rm -f $(temp_file)
endef
define Build/kernel-bin
rm -f $@
cp $< $@
endef
define Build/linksys-image
$(TOPDIR)/scripts/linksys-image.sh \
"$(call param_get_default,type,$(1),$(DEVICE_NAME))" \
$@ $@.new
mv $@.new $@
endef
define Build/lzma
$(call Build/lzma-no-dict,-lc1 -lp2 -pb2 $(1))
endef
define Build/lzma-no-dict
$(STAGING_DIR_HOST)/bin/lzma e $@ $(1) $@.new
@mv $@.new $@
endef
define Build/netgear-chk
$(STAGING_DIR_HOST)/bin/mkchkimg \
-o $@.new \
-k $@ \
-b $(NETGEAR_BOARD_ID) \
$(if $(NETGEAR_REGION),-r $(NETGEAR_REGION),)
mv $@.new $@
endef
define Build/netgear-dni
$(STAGING_DIR_HOST)/bin/mkdniimg \
-B $(NETGEAR_BOARD_ID) -v $(VERSION_DIST).$(firstword $(subst -, ,$(REVISION))) \
$(if $(NETGEAR_HW_ID),-H $(NETGEAR_HW_ID)) \
-r "$(1)" \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/netgear-encrypted-factory
$(TOPDIR)/scripts/netgear-encrypted-factory.py \
--input-file $@ \
--output-file $@ \
--model $(NETGEAR_ENC_MODEL) \
--region $(NETGEAR_ENC_REGION) \
--version V1.0.0.0.$(VERSION_DIST).$(firstword $(subst -, ,$(REVISION))) \
--encryption-block-size 0x20000 \
--openssl-bin "$(STAGING_DIR_HOST)/bin/openssl" \
--key 6865392d342b4d212964363d6d7e7765312c7132613364316e26322a5a5e2538 \
--iv 4a253169516c38243d6c6d2d3b384145
endef
define Build/openmesh-image
$(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" \
"$@-fwupgrade.cfg" \
"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" \
"$(call param_get_default,rootfs,$(1),$@)"
$(TOPDIR)/scripts/combined-ext-image.sh \
"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" "$@" \
"$@-fwupgrade.cfg" "fwupgrade.cfg" \
"$(call param_get_default,kernel,$(1),$(IMAGE_KERNEL))" "kernel" \
"$(call param_get_default,rootfs,$(1),$@)" "rootfs"
endef
define Build/pad-extra
dd if=/dev/zero bs=$(1) count=1 >> $@
endef
define Build/pad-offset
let \
size="$$(stat -c%s $@)" \
pad="$(subst k,* 1024,$(word 1, $(1)))" \
offset="$(subst k,* 1024,$(word 2, $(1)))" \
pad="(pad - ((size + offset) % pad)) % pad" \
newsize='size + pad'; \
dd if=$@ of=$@.new bs=$$newsize count=1 conv=sync
mv $@.new $@
endef
define Build/pad-rootfs
$(STAGING_DIR_HOST)/bin/padjffs2 $@ $(1) \
$(if $(BLOCKSIZE),$(BLOCKSIZE:%k=%),4 8 16 64 128 256)
endef
define Build/pad-to
$(call Image/pad-to,$@,$(1))
endef
define Build/patch-cmdline
$(STAGING_DIR_HOST)/bin/patch-cmdline $@ '$(CMDLINE)'
endef
# Convert a raw image into a $1 type image.
# E.g. | qemu-image vdi <optional extra arguments to qemu-img binary>
define Build/qemu-image
if command -v qemu-img; then \
qemu-img convert -f raw -O $1 $@ $@.new; \
mv $@.new $@; \
else \
echo "WARNING: Install qemu-img to create VDI/VMDK images" >&2; exit 1; \
fi
endef
define Build/qsdk-ipq-factory-nand
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its ubi $@
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/qsdk-ipq-factory-nor
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its hlos $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/seama
$(STAGING_DIR_HOST)/bin/seama -i $@ \
-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
mv $@.seama $@
endef
define Build/seama-seal
$(STAGING_DIR_HOST)/bin/seama -i $@ -s $@.seama \
-m "signature=$(SEAMA_SIGNATURE)"
mv $@.seama $@
endef
define Build/senao-header
$(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new
mv $@.new $@
endef
define Build/sysupgrade-tar
sh $(TOPDIR)/scripts/sysupgrade-tar.sh \
--board $(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)) \
--kernel $(call param_get_default,kernel,$(1),$(IMAGE_KERNEL)) \
--rootfs $(call param_get_default,rootfs,$(1),$(IMAGE_ROOTFS)) \
$@
endef
define Build/tplink-safeloader
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
-B $(TPLINK_BOARD_ID) \
-V $(REVISION) \
-k $(IMAGE_KERNEL) \
-r $@ \
-o $@.new \
-j \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-S) && mv $@.new $@ || rm -f $@
endef
define Build/tplink-v1-header
$(STAGING_DIR_HOST)/bin/mktplinkfw \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-m $(TPLINK_HEADER_VERSION) -N "$(VERSION_DIST)" -V $(REVISION) \
-k $@ -o $@.new $(1)
@mv $@.new $@
endef
# combine kernel and rootfs into one image
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
# <type> is "sysupgrade" or "factory"
#
# -a align the rootfs start on an <align> bytes boundary
# -j add jffs2 end-of-filesystem markers
# -s strip padding from end of the image
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
define Build/tplink-v1-image
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) \
-N "$(VERSION_DIST)" -V $(REVISION) -m $(TPLINK_HEADER_VERSION) \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new -j -X 0x40000 \
-a $(call rootfs_align,$(FILESYSTEM)) \
$(wordlist 2,$(words $(1)),$(1)) \
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
endef
define Build/tplink-v2-header
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-c -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -L $(KERNEL_LOADADDR) \
-E $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
-T $(TPLINK_HVERSION) -V "ver. 2.0" \
-k $@ -o $@.new $(1)
@mv $@.new $@
endef
define Build/tplink-v2-image
$(STAGING_DIR_HOST)/bin/mktplinkfw2 \
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) \
-w $(TPLINK_HWREVADD) -F "$(TPLINK_FLASHLAYOUT)" \
-T $(TPLINK_HVERSION) -V "ver. 2.0" -a 0x4 -j \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new $(1)
cat $@.new >> $@
rm -rf $@.new
endef
define Build/uImage
mkimage \
-A $(LINUX_KARCH) \
-O linux \
-T kernel \
-C $(word 1,$(1)) \
-a $(KERNEL_LOADADDR) \
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n '$(if $(UIMAGE_NAME),$(UIMAGE_NAME),$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION))' \
$(if $(UIMAGE_MAGIC),-M $(UIMAGE_MAGIC)) \
$(wordlist 2,$(words $(1)),$(1)) \
-d $@ $@.new
mv $@.new $@
endef
define Build/xor-image
$(STAGING_DIR_HOST)/bin/xorimage -i $@ -o $@.xor $(1)
mv $@.xor $@
endef
define Build/zip
rm -rf $@.tmp
mkdir $@.tmp
mv $@ $@.tmp/$(word 1,$(1))
TZ=UTC $(STAGING_DIR_HOST)/bin/zip -j -X \
$(wordlist 2,$(words $(1)),$(1)) \
$@ $@.tmp/$(if $(word 1,$(1)),$(word 1,$(1)),$$(basename $@))
rm -rf $@.tmp
endef
define Build/zyxel-ras-image
let \
newsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \
$(STAGING_DIR_HOST)/bin/mkrasimage \
-b $(RAS_BOARD) \
-v $(RAS_VERSION) \
-r $@ \
-s $$newsize \
-o $@.new \
$(if $(findstring separate-kernel,$(word 1,$(1))),-k $(IMAGE_KERNEL)) \
&& mv $@.new $@
endef