openwrt/target/linux/ar71xx/base-files/etc/board.d/01_leds

850 lines
35 KiB
Plaintext
Raw Normal View History

#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/ar71xx.sh
board_config_update
board=$(ar71xx_board_name)
case "$board" in
a40)
ucidef_set_led_default "status-red" "Status (red)" "a40:red:status" "0"
ucidef_set_led_default "status-blue" "Status (blue)" "a40:blue:status" "0"
;;
a60)
ucidef_set_led_default "status-red" "Status (red)" "a60:red:status" "0"
ucidef_set_led_default "status-blue" "Status (blue)" "a60:blue:status" "0"
;;
airgateway|\
airgatewaypro)
ucidef_set_led_wlan "wlan" "WLAN" "ubnt:blue:wlan" "phy0tpt"
;;
alfa-nx)
ucidef_set_led_netdev "wan" "WAN" "alfa:green:led_2" "eth0"
ucidef_set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1"
;;
all0258n|\
all0315n)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:red:rssilow" "wlan0" "1" "40" "0" "6"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:yellow:rssimedium" "wlan0" "30" "80" "-29" "5"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssihigh" "wlan0" "70" "100" "-69" "8"
;;
antminer-s1|\
antminer-s3)
ucidef_set_led_default "sys" "SYS" "$board:green:sys" "0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
case "$board" in
antminer-s3)
ucidef_set_led_default "lan" "LAN" "$board:yellow:lan" "0"
;;
esac
;;
antrouter-r1)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
;;
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
archer-c59-v1|\
archer-c60-v1)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-27 21:41:41 +00:00
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
case "$board" in
archer-c59-v1)
ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
;;
esac
;;
arduino-yun)
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
;;
db120)
ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
;;
ap147-010)
ucidef_set_led_netdev "wan" "WAN" "ap147:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "ap147:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "ap147:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "ap147:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
ap90q|\
cpe830|\
cpe870|\
dr531)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
case "$board" in
ap90q)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
cpe830|\
cpe870)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:link1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:link2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:link3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:link4" "wlan0" "76" "100" "-75" "13"
;;
esac
;;
bhr-4grv2)
ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
;;
bsb)
ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1"
;;
bullet-m|\
nanostation-m|\
rocket-m|\
rocket-m-xw|\
nanostation-m-xw|\
loco-m-xw)
ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100" "-75" "13"
;;
rocket-m-ti)
ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:green:link3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link4" "wlan0" "76" "100" "-75" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link5" "wlan0" "76" "100" "-75" "13"
ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "ubnt:green:link4" "wlan0" "76" "100" "-75" "13"
;;
bxu2000n-2-a1)
ucidef_set_led_wlan "wlan" "WLAN" "bhu:green:wlan" "phy0tpt"
;;
cap324)
ucidef_set_led_netdev "lan" "LAN" "pcs:green:lan" "eth0"
ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "pcs:amber:wlan" "phy0tpt"
ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "pcs:green:wlan" "phy1tpt"
;;
c-55)
ucidef_set_led_netdev "lan_green" "LAN_GREEN" "$board:green:lan" "eth0"
ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "$board:amber:wlan" "phy0tpt"
ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "$board:green:wlan" "phy1tpt"
;;
c-60)
ucidef_set_led_wlan "wlan1_green" "WLAN1_GREEN" "$board:green:wlan1" "phy0tpt"
ucidef_set_led_wlan "wlan2_green" "WLAN2_GREEN" "$board:green:wlan2" "phy1tpt"
;;
cap4200ag)
ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1"
ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt"
ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "senao:green:wlan" "phy1tpt"
;;
carambola2)
ucidef_set_led_netdev "lan" "LAN" "$board:orange:eth0" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:orange:eth1" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
cf-e316n-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
cf-e320n-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
cf-e380ac-v1|\
cf-e380ac-v2)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt"
;;
cf-e520n|\
cf-e530n)
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
;;
cpe210|\
cpe510|\
wbs210|\
wbs510)
ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
;;
cr3000)
ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
;;
cr5000)
ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
;;
dragino2)
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
;;
dw33d)
ucidef_set_led_usbdev "mmc" "MMC" "$board:blue:mmc" "1-1"
ucidef_set_led_usbdev "usb" "USB" "$board:blue:usb" "2-1"
ucidef_set_led_netdev "internet" "INTERNET" "$board:blue:internet" "eth0"
ucidef_set_led_wlan "wlan2g" "WLAN-2.4G" "$board:blue:wlan-2g" "phy1tpt"
;;
eap300v2)
ucidef_set_led_netdev "lan" "LAN" "engenius:blue:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt"
;;
f9k1115v2)
ucidef_set_led_usbdev "usb2" "USB2" "belkin:green:usb2" "1-1"
;;
rb-750)
ucidef_set_led_default "act" "act" "rb750:green:act" "1"
ucidef_set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
ucidef_set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10"
ucidef_set_led_switch "port3" "port3" "rb750:green:port3" "switch0" "0x08"
ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
;;
rb-750-r2|\
rb-750up-r2)
ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08"
ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04"
ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
;;
rb-941-2nd)
ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
;;
rb-951ui-2nd)
ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08"
ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04"
ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt"
;;
rb-2011l|\
rb-2011uas|\
rb-2011uias|\
rb-2011uas-2hnd|\
rb-2011uias-2hnd)
ucidef_set_led_switch "eth6" "ETH6" "rb:green:eth6" "switch1" "0x20"
ucidef_set_led_switch "eth7" "ETH7" "rb:green:eth7" "switch1" "0x10"
ucidef_set_led_switch "eth8" "ETH8" "rb:green:eth8" "switch1" "0x08"
ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04"
ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02"
;;
rb-mapl-2nd)
ucidef_set_led_default "power" "POWER" "rb:green:power" "1"
ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt"
;;
dap-2695-a1)
ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:green:wlan2g" "phy1tpt"
;;
dhp-1565-a1)
ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20"
;;
dir-600-a1|\
dir-615-e1|\
dir-615-e4|\
ebr-2310-c1)
ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "d-link:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "d-link:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "d-link:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10"
;;
dir-615-c1)
ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
;;
dir-825-b1|\
dir-825-c1)
ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
case "$board" in
dir-825-c1)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt"
;;
esac
;;
dir-615-i1)
ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "d-link:amber:power" "0"
ucidef_set_led_default "wps" "WPS" "d-link:blue:wps" "0"
ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
;;
dlan-hotspot)
ucidef_set_led_wlan "wlan" "WLAN" "devolo:green:wifi" "phy0tpt"
;;
dlan-pro-500-wp)
ucidef_set_led_default "power" "System Power" "devolo:green:status" "1"
ucidef_set_led_netdev "lan" "Ethernet Activity" "devolo:green:eth" "br-lan"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "devolo:green:wlan-2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none"
;;
dlan-pro-1200-ac)
ucidef_set_led_wlan "wlan" "WLAN" "devolo:status:wlan" "phy0radio"
ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
;;
gl-ar150|\
gl-ar300|\
gl-ar300m|\
gl-mifi)
ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt"
case "$board" in
gl-mifi)
ucidef_set_led_netdev "wan" "WAN" "$board:wan" "eth0"
ucidef_set_led_netdev "lan" "LAN" "$board:lan" "eth1"
ucidef_set_led_netdev "3gnet" "3GNET" "$board:net" "3g-wan"
;;
esac
;;
gl-domino|\
sc300m|\
wrt160nl)
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
gl-inet)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
;;
esr900)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt"
;;
esr1750|\
epg5000)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan-2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan-5g" "phy0tpt"
;;
hiwifi-hc6361)
ucidef_set_led_netdev "inet" "INET" "hiwifi:blue:internet" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "hiwifi:blue:wlan-2p4" "phy0tpt"
;;
hornet-ub|\
hornet-ub-x2)
ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
;;
mc-mac1200r)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt"
;;
mr12|\
mr16)
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
ucidef_set_led_wlan "wlan1" "WLAN1" "$board:green:wifi1" "phy0assoc"
ucidef_set_led_wlan "wlan2" "WLAN2" "$board:green:wifi2" "phy0assoc"
ucidef_set_led_wlan "wlan3" "WLAN3" "$board:green:wifi3" "phy0assoc"
ucidef_set_led_wlan "wlan4" "WLAN4" "$board:green:wifi4" "phy0tpt"
;;
mr18)
ucidef_set_led_netdev "wlan0" "WLAN0" "$board:blue:tricolor0" "wlan0"
;;
mr600)
ucidef_set_led_wlan "wlan58" "WLAN58" "$board:green:wlan58" "phy0tpt"
ucidef_set_led_default "wps" "WPS" "mr600:blue:wps" "0"
;;
mr600v2)
ucidef_set_led_default "wlan24-red" "WLAN 2.4GHz (red)" "mr600:red:wlan24" "0"
ucidef_set_led_default "wlan24-yellow" "WLAN 2.4GHz (yellow)" "mr600:yellow:wlan24" "0"
ucidef_set_led_wlan "wlan24-green" "WLAN 4GHz (green)" "mr600:green:wlan24" "phy1tpt"
ucidef_set_led_default "wlan5-red" "WLAN 5GHz (red)" "mr600:red:wlan58" "0"
ucidef_set_led_default "wlan5-yellow" "WLAN 5GHz (yellow)" "mr600:yellow:wlan58" "0"
ucidef_set_led_wlan "wlan5-green" "WLAN 5GHz (green)" "mr600:green:wlan58" "phy0tpt"
;;
mr1750|\
mr1750v2)
ucidef_set_led_netdev "lan" "LAN" "mr1750:blue:wan" "eth0"
ucidef_set_led_wlan "wlan58" "WLAN58" "mr1750:blue:wlan58" "phy0tpt"
ucidef_set_led_wlan "wlan24" "WLAN24" "mr1750:blue:wlan24" "phy1tpt"
ucidef_set_led_default "status-red" "Status (red)" "mr1750:red:wifi" "0"
ucidef_set_led_default "status-green" "Status (green)" "mr1750:green:wifi" "0"
;;
mr900|\
mr900v2)
ucidef_set_led_netdev "lan" "LAN" "mr900:blue:wan" "eth0"
ucidef_set_led_wlan "wlan24" "WLAN24" "mr900:blue:wlan24" "phy0tpt"
ucidef_set_led_wlan "wlan58" "WLAN58" "mr900:blue:wlan58" "phy1tpt"
ucidef_set_led_default "status-red" "Status (red)" "mr900:red:wifi" "0"
ucidef_set_led_default "status-green" "Status (green)" "mr900:green:wifi" "0"
;;
mynet-n600)
ucidef_set_led_netdev "wan" "WAN" "wd:blue:internet" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "wd:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "wd:green:lan2" "switch0" "0x10"
ucidef_set_led_switch "lan3" "LAN3" "wd:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "wd:green:lan4" "switch0" "0x04"
;;
mynet-rext)
ucidef_set_led_netdev "lan" "LAN" "wd:blue:ethernet" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "wd:blue:quality1" "wlan0" "1" "40" "0" "6"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "wd:blue:quality2" "wlan0" "30" "80" "-29" "5"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "wd:blue:quality3" "wlan0" "70" "100" "-69" "8"
ucidef_set_led_wlan "wlan" "WLAN" "wd:blue:wireless" "phy0tpt"
;;
mzk-w04u)
ucidef_set_led_usbdev "usb" "USB" "planex:green:usb" "1-1"
;;
mzk-w300nh)
ucidef_set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt"
;;
nbg460n_550n_550nh)
ucidef_set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt"
;;
nbg6616)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wifi2g" "phy1tpt"
ucidef_set_led_wlan "wlan5" "WLAN5" "$board:green:wifi5g" "phy0tpt"
ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1"
ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "2-1"
;;
nbg6716)
ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wifi2g" "phy1tpt"
ucidef_set_led_wlan "wlan5" "WLAN5" "$board:white:wifi5g" "phy0tpt"
ucidef_set_led_usbdev "usb1" "USB1" "$board:white:usb1" "1-1"
ucidef_set_led_usbdev "usb2" "USB2" "$board:white:usb2" "2-1"
;;
om2p|\
om2pv2|\
om2pv4|\
om2p-hs|\
om2p-hsv2|\
om2p-hsv3|\
om2p-hsv4|\
om2p-lc)
ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
ucidef_set_led_default "wlan-red" "WLAN (red)" "om2p:red:wifi" "0"
ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om2p:yellow:wifi" "0"
ucidef_set_led_default "wlan-green" "WLAN (green)" "om2p:green:wifi" "0"
;;
om5p|\
om5p-an)
ucidef_set_led_netdev "port1" "port1" "om5p:blue:wan" "eth0"
ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
ucidef_set_led_default "wlan-red" "WLAN (red)" "om5p:red:wifi" "0"
ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5p:yellow:wifi" "0"
ucidef_set_led_default "wlan-green" "WLAN (green)" "om5p:green:wifi" "0"
;;
om5p-ac)
ucidef_set_led_netdev "port1" "port1" "om5pac:blue:lan" "eth0"
ucidef_set_led_netdev "port2" "port2" "om5pac:blue:wan" "eth1"
ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0"
ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0"
ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0"
;;
om5p-acv2)
ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0"
ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0"
ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0"
;;
omy-g1)
ucidef_set_led_wlan "wlan" "WLAN" "omy:green:wlan" "phy0tpt"
ucidef_set_led_netdev "wan" "WAN" "omy:green:wan" "eth0"
ucidef_set_led_netdev "lan" "LAN" "omy:green:lan" "eth1"
;;
omy-x1)
ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
;;
pqi-air-pen)
ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt"
ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0"
;;
qihoo-c301)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
;;
re450)
ucidef_set_led_netdev "lan_data" "LAN Data" "$board:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "$board:green:lan_link" "eth0" "link"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
;;
sc1750|\
sc450)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
smart-300)
ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "nc-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "nc-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "nc-link:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt"
;;
som9331)
ucidef_set_led_netdev "wan" "WAN" "$board:orange:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "$board:orange:lan1" "switch0" "0x08"
ucidef_set_led_switch "lan2" "LAN2" "$board:orange:lan2" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "$board:green:system" "1-1"
;;
ar71xx: add support for YunCore SR3200 and XD3200 YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8337N. YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334. Common specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB or RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm - 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm SR3200 specification: - 5x 10/100/1000 Mbps Ethernet - 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips) - 3x LED (+ 5x LED in RJ45 sockets), 1x button - UART header on PCB XD3200 specification: - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) - 4x internal antennas - 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button - UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB LED for 5 GHz WLAN is currently not supported on both devices as it is connected directly to the QCA9882 radio chip. Flash instruction under vendor firmware, using telnet/SSH: 1. If your firmware does not have root password, go to point 5 2. Connect PC with 192.168.1.x address to LAN or WAN port 3. Power up device, enter failsafe mode with button (no LED indicator!) 4. Change root password and reboot (mount_root, passwd ..., reboot -f) 5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP 6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 7. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" - mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-02 21:42:41 +00:00
sr3200)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
;;
tellstick-znet-lite)
ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" "link"
;;
tew-712br)
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "trendnet:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "trendnet:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "trendnet:green:lan4" "switch0" "0x10"
ucidef_set_led_wlan "wlan" "WLAN" "trendnet:green:wlan" "phy0tpt"
;;
tew-732br)
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
;;
tew-823dru)
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0"
;;
tl-mr11u|\
tl-mr3020|\
tl-mr3040|\
tl-mr3040-v2)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tl-mr3220|\
tl-mr3420)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
;;
tl-mr3220-v2|\
tl-wr741nd-v4)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
case "$board" in
tl-mr3220-v2)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
;;
esac
;;
tl-mr3420-v2|\
tl-wr841n-v8|\
tl-wr842n-v2|\
tl-wr941nd-v5)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
case "$board" in
tl-wr842n-v2|\
tl-mr3420-v2)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
;;
esac
;;
tl-wa7210n-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:signal1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:signal2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:signal3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:signal4" "wlan0" "76" "100" "-75" "13"
;;
tl-wa750re)
ucidef_set_led_netdev "lan" "LAN" "tp-link:orange:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:orange:wlan" "phy0tpt"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:orange:signal1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:orange:signal2" "wlan0" "20" "100" "-19" "13"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:orange:signal3" "wlan0" "40" "100" "-39" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:orange:signal4" "wlan0" "60" "100" "-59" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:orange:signal5" "wlan0" "80" "100" "-79" "13"
;;
tl-wa801nd-v3)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wa850re|\
tl-wa850re-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:blue:signal1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:blue:signal2" "wlan0" "20" "100" "-19" "13"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:blue:signal3" "wlan0" "40" "100" "-39" "13"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:blue:signal4" "wlan0" "60" "100" "-59" "13"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:blue:signal5" "wlan0" "80" "100" "-79" "13"
;;
tl-wa701nd-v2|\
tl-wa860re|\
tl-wa830re-v2|\
tl-wa801nd-v2|\
tl-wa901nd-v3|\
tl-wa901nd-v4)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wa901nd)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tl-wa901nd-v2|\
tl-wr941nd|\
tl-wr1041n-v2)
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wdr3320-v2)
ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt"
;;
tl-wdr3500)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt"
;;
tl-wdr4300)
ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1.1"
ucidef_set_led_usbdev "usb2" "USB2" "tp-link:green:usb2" "1-1.2"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt"
;;
tl-wdr4900-v2)
ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1"
ucidef_set_led_usbdev "usb2" "USB2" "tp-link:green:usb2" "2-1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt"
;;
tl-wdr6500-v2|\
tl-wr741nd)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
;;
archer-c5|\
archer-c7)
ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1"
ucidef_set_led_usbdev "usb2" "USB2" "tp-link:green:usb2" "2-1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy0tpt"
;;
tl-wpa8630)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
;;
tl-wr802n-v1)
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
;;
tl-wr802n-v2)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt"
;;
tl-wr940n-v4|\
tl-wr941nd-v6)
ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:blue:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:blue:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
;;
tl-wr841n-v9|\
tl-wr841n-v11|\
tl-wr842n-v3)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
case "$board" in
tl-wr842n-v3)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:3g" "1-1"
;;
esac
;;
tl-wr1043nd|\
tl-wr1043nd-v2)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
tl-wr1043nd-v4)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
tl-wr2543n)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
;;
tube2h)
ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "signal1" "SIGNAL1" "alfa:red:signal1" "wlan0" "1" "100" "0" "13"
ucidef_set_led_rssi "signal2" "SIGNAL2" "alfa:orange:signal2" "wlan0" "26" "100" "-25" "13"
ucidef_set_led_rssi "signal3" "SIGNAL3" "alfa:green:signal3" "wlan0" "51" "100" "-50" "13"
ucidef_set_led_rssi "signal4" "SIGNAL4" "alfa:green:signal4" "wlan0" "76" "100" "-75" "13"
;;
wndap360)
ucidef_set_led_power "power" "POWER GREEN" "netgear:green:power" "1"
;;
wndr3700)
ucidef_set_led_default "wan" "WAN LED (green)" "netgear:green:wan" "0"
ucidef_set_led_usbdev "usb" "USB" "netgear:green:usb" "1-1"
;;
r6100)
ucidef_set_led_netdev "wan" "WAN (green)" "netgear:green:wan" "eth0"
ucidef_set_led_usbdev "usb" "USB" "netgear:blue:usb" "1-1"
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt"
;;
wndr3700v4|\
wndr4300)
ucidef_set_led_netdev "wan" "WAN (green)" "netgear:green:wan" "eth0.2"
ucidef_set_led_usbdev "usb" "USB" "netgear:green:usb" "1-1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "netgear:green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "netgear:blue:wlan5g" "phy1tpt"
;;
whr-g301n|\
whr-hp-g300n|\
whr-hp-gn)
ucidef_set_led_netdev "wan" "WAN" "buffalo:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "buffalo:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "buffalo:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10"
;;
wlae-ag300n)
ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
;;
wnr1000-v2|\
wnr2000-v3)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04"
ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02"
ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02"
ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02"
ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02"
;;
wnr2000-v4)
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
ucidef_set_led_switch "lan1" "LAN1" "netgear:amber:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "netgear:amber:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "netgear:amber:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "netgear:amber:lan4" "switch0" "0x10"
ucidef_set_led_usbdev "usb" "USB" "netgear:amber:status" "1-1"
;;
wnr2200)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04"
ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02"
ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02"
ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02"
ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02"
ucidef_set_led_usbdev "usb" "USB" "netgear:green:usb" "1-1"
;;
wnr612-v2)
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
ucidef_set_led_netdev "wlan" "WLAN" "netgear:green:wlan" "wlan0"
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
;;
wpn824n)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10"
ucidef_set_led_default "lan1green" "LAN1 (green)" "netgear:green:lan1" "0"
ucidef_set_led_default "lan2green" "LAN2 (green)" "netgear:green:lan2" "0"
ucidef_set_led_default "lan3green" "LAN3 (green)" "netgear:green:lan3" "0"
ucidef_set_led_default "lan4green" "LAN4 (green)" "netgear:green:lan4" "0"
ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
ucidef_set_led_default "wps1" "WPS1" "netgear:blue:wps1" "0"
ucidef_set_led_default "wps2" "WPS2" "netgear:blue:wps2" "0"
ucidef_set_led_default "status" "STATUS" "netgear:amber:status" "0"
ucidef_set_led_default "test" "TEST" "netgear:amber:test" "0"
;;
wzr-hp-ag300h)
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1"
ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1"
;;
wzr-hp-g300nh)
ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
ucidef_set_led_usbdev "usb" "USB" "buffalo:blue:usb" "1-1"
;;
ar71xx: add support for YunCore SR3200 and XD3200 YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8337N. YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334. Common specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB or RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm - 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm SR3200 specification: - 5x 10/100/1000 Mbps Ethernet - 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips) - 3x LED (+ 5x LED in RJ45 sockets), 1x button - UART header on PCB XD3200 specification: - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) - 4x internal antennas - 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button - UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB LED for 5 GHz WLAN is currently not supported on both devices as it is connected directly to the QCA9882 radio chip. Flash instruction under vendor firmware, using telnet/SSH: 1. If your firmware does not have root password, go to point 5 2. Connect PC with 192.168.1.x address to LAN or WAN port 3. Power up device, enter failsafe mode with button (no LED indicator!) 4. Change root password and reboot (mount_root, passwd ..., reboot -f) 5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP 6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 7. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" - mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-02 21:42:41 +00:00
xd3200)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
;;
z1)
ucidef_set_led_netdev "wlan1" "WLAN1" "$board:blue:tricolor0" "wlan1"
;;
zbt-we1526)
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
zcn-1523h-2)
ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
;;
zcn-1523h-5)
ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
ucidef_set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1"
;;
esac
board_config_flush
exit 0