ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-28 01:28:59 +00:00
Code Issues Actions 10 Packages Projects Releases Wiki Activity
32c74552b2
openwrt/target/linux/layerscape/patches-5.4/302-dts-0018-arm64-dts-ls104x-use-a-pseudo-bus-to-constrain-usb-d.patch

194 lines
6.0 KiB
Diff
Raw Normal View History

layerscape: add patches-5.4 Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-04-10 02:47:05 +00:00
From a6a86473350c7dcbae61afa1e926941d76ca17ed Mon Sep 17 00:00:00 2001
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Date: Thu, 20 Sep 2018 13:46:54 +0300
Subject: [PATCH] arm64: dts: ls104x: use a pseudo-bus to constrain usb dma
size
Wrap the usb controllers in an intermediate simple-bus and use it to
constrain the dma address size of these usb controllers to the 40 bits
that they generate toward the interconnect.
This is required because the SoC uses 48 bits address sizes and this
mismatch would lead to smmu context faults because the usb generates
40-bit addresses while the smmu page tables are populated with 48-bit
wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 82 ++++++++++++++------------
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 76 +++++++++++++-----------
2 files changed, 87 insertions(+), 71 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
kernel: bump 5.4 to 5.4.111 Refreshed all patches. The following patches were manually changed: * 610-netfilter_match_bypass_default_checks.patch * 611-netfilter_match_bypass_default_table.patch * 802-can-0002-can-rx-offload-fix-long-lines.patch * 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch * 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch * 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch * 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch * 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch The can-dev.ko model was moved in the upstream kernel. Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-04-11 13:43:19 +00:00
@@ -727,43 +727,51 @@
layerscape: add patches-5.4 Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-04-10 02:47:05 +00:00
<&clockgen 4 0>;
};
- usb0: usb3@2f00000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x2f00000 0x0 0x10000>;
- interrupts = <0 60 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- configure-gfladj;
- };
+ usb_aux_bus: usb_aux_bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
- usb1: usb3@3000000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3000000 0x0 0x10000>;
- interrupts = <0 61 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- configure-gfladj;
- };
+ usb0: usb3@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
+ };
+
+ usb1: usb3@3000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <0 61 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
+ };
- usb2: usb3@3100000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <0 63 0x4>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- configure-gfladj;
+ usb2: usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 63 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
+ };
};
sata: sata@3200000 {
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
kernel: bump 5.4 to 5.4.111 Refreshed all patches. The following patches were manually changed: * 610-netfilter_match_bypass_default_checks.patch * 611-netfilter_match_bypass_default_table.patch * 802-can-0002-can-rx-offload-fix-long-lines.patch * 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch * 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch * 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch * 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch * 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch The can-dev.ko model was moved in the upstream kernel. Compile-tested on: x86/64, armvirt/64, ath79/generic Runtime-tested on: x86/64, armvirt/64, ath79/generic Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-04-11 13:43:19 +00:00
@@ -625,40 +625,48 @@
layerscape: add patches-5.4 Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-04-10 02:47:05 +00:00
<&clockgen 4 1>;
};
- usb0: usb@2f00000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x2f00000 0x0 0x10000>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- };
+ usb_aux_bus: usb_aux_bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
- usb1: usb@3000000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3000000 0x0 0x10000>;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
- };
+ usb0: usb@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ };
+
+ usb1: usb@3000000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3000000 0x0 0x10000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ };
- usb2: usb@3100000 {
- compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- snps,quirk-frame-length-adjustment = <0x20>;
- snps,dis_rxdet_inp3_quirk;
- snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
- usb3-lpm-capable;
- snps,dis-u1u2-when-u3-quirk;
+ usb2: usb@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
+ };
};
sata: sata@3200000 {
Reference in New Issue Copy Permalink