2019-07-19 12:58:51 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
|
2020-09-25 19:52:57 +00:00
|
|
|
#include "ar9344.dtsi"
|
|
|
|
|
2019-07-19 12:58:51 +00:00
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include <dt-bindings/input/input.h>
|
2021-05-05 03:32:00 +00:00
|
|
|
#include <dt-bindings/mtd/partitions/uimage.h>
|
2019-07-19 12:58:51 +00:00
|
|
|
|
|
|
|
/ {
|
ath79: provide label MAC address
This patch adds the label MAC address for several devices in
ath79.
Some devices require setting the MAC address in 02_network:
For the following devices, the netif device can be linked in
device tree, but the MAC address cannot be read:
- alfa-network,ap121f
- avm,fritz300e
- ubnt-xm devices
For the following devices, label MAC address is tied to lan or
wan, so no node to link to exists in device tree:
- adtran,bsap1800-v2
- adtran,bsap1840
- dlink,dir-842-c1/-c2/-c3
- engenius,ecb1750
- iodata,etg3-r
- iodata,wn-ac1167dgr
- iodata,wn-ac1600dgr
- iodata,wn-ac1600dgr2
- iodata,wn-ag300dgr
- nec,wg800hp
- nec,wg1200cr
- trendnet,tew-823dru
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-08-15 13:13:33 +00:00
|
|
|
aliases {
|
|
|
|
label-mac-device = &wmac;
|
|
|
|
};
|
|
|
|
|
2019-07-19 12:58:51 +00:00
|
|
|
keys {
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
|
|
reset {
|
|
|
|
linux,code = <KEY_RESTART>;
|
|
|
|
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
|
|
|
debounce-interval = <60>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&ref {
|
|
|
|
clock-frequency = <40000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&spi {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
flash@0 {
|
|
|
|
compatible = "jedec,spi-nor";
|
|
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <25000000>;
|
|
|
|
|
|
|
|
partitions {
|
|
|
|
compatible = "fixed-partitions";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
|
|
uboot: partition@0 {
|
|
|
|
label = "u-boot";
|
|
|
|
reg = <0x000000 0x020000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@20000 {
|
|
|
|
label = "partition-table";
|
|
|
|
reg = <0x020000 0x010000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
info: partition@30000 {
|
|
|
|
label = "info";
|
|
|
|
reg = <0x030000 0x010000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
partition@40000 {
|
|
|
|
label = "firmware";
|
|
|
|
reg = <0x040000 0x780000>;
|
2021-05-05 03:32:00 +00:00
|
|
|
compatible = "openwrt,uimage", "denx,uimage";
|
|
|
|
openwrt,ih-magic = <IH_MAGIC_OKLI>;
|
|
|
|
openwrt,offset = <0x3000>;
|
2019-07-19 12:58:51 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
partition@7c0000 {
|
|
|
|
label = "config";
|
|
|
|
reg = <0x7c0000 0x030000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
|
|
|
|
art: partition@7f0000 {
|
|
|
|
label = "art";
|
|
|
|
reg = <0x7f0000 0x010000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&wmac {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
mtd-cal-data = <&art 0x1000>;
|
ath79: consistently use "info" label for default-mac partition
The tp-link safeloader devices typically contain a partition
"default-mac" which stores the MAC addresses. It is followed by other
partitions containing device info, like
{"default-mac", 0x610000, 0x00020},
{"pin", 0x610100, 0x00020},
{"product-info", 0x611100, 0x01000},
In DTS, we typically assign a 0x10000 sized partition for these,
which is mostly labelled "mac" or "info". In rarer cases, the
partitions have been enclosed in a larger "tplink" or "config"
partition.
However, when comparing different devices, the implementation appears
relatively arbitrary at the moment.
Thus, this PR aims at harmonizing these partitions by always using
the name "info" for the DTS partition containing "default-mac".
"info" is preferred over "mac" as we never just have "default-mac"
alone, but always some other device-info partitions as well.
While at it, this also establishes a similar partitioning for the
few devices where the "info" partitions are part of a bigger
unspecific "config" partition or similar.
Besides the harmonization itself, this also allows to merge a few
cases in 11-ath10k-caldata.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-12 18:54:04 +00:00
|
|
|
mtd-mac-address = <&info 0x8>;
|
2019-07-19 12:58:51 +00:00
|
|
|
};
|
2019-11-06 12:51:20 +00:00
|
|
|
|
|
|
|
ð0 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
phy-handle = <&swphy4>;
|
|
|
|
|
|
|
|
mtd-mac-address = <&info 0x8>;
|
|
|
|
};
|
2020-06-18 20:31:11 +00:00
|
|
|
|
|
|
|
ð1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
2020-12-02 10:24:07 +00:00
|
|
|
|
|
|
|
&gpio {
|
|
|
|
gpio_ext_lna0 {
|
|
|
|
gpio-hog;
|
|
|
|
gpios = <18 GPIO_ACTIVE_HIGH>;
|
|
|
|
output-high;
|
|
|
|
line-name = "tp-link:ext:lna0";
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio_ext_lna1 {
|
|
|
|
gpio-hog;
|
|
|
|
gpios = <19 GPIO_ACTIVE_HIGH>;
|
|
|
|
output-high;
|
|
|
|
line-name = "tp-link:ext:lna1";
|
|
|
|
};
|
|
|
|
};
|