ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 08:51:13 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
2d838f3f93
openwrt/target/linux/ipq806x/image/generic.mk

567 lines
15 KiB
Makefile
Raw Normal View History

ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
DEVICE_VARS += TPLINK_BOARD_ID
ipq806x: Increase kernel size to 4 MB for EA8500/EA7500v1 Increase the kernel size from 3 MB to 4 MB for EA8500 and EA7500v1. * modify the common .dtsi * modify the kernel size in the image recipes Define compat-version 2.0 to force factory image usage for sysupgrade. Add explanation message. Reenable both devices. As for 4MiB (and not more): Hannu Nyman noted that: "We have lots of ipq806x devices with 4 MB kernel, so will need action at that point in future in any case. (Assuming that the bootloader did not have a 4 MB limit that has been tested...)" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (squashed, added 4MiB notice of support in ipq806x) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-24 16:31:48 +00:00
define Device/kernel-size-migration
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := *** Kernel partition size has changed from earlier \
versions. You need to sysupgrade with the OpenWrt factory image and \
use the force flag when image check fails. Settings will be lost. ***
endef
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
define Device/dsa-migration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
define Device/dsa-migration-from-2_0
DEVICE_COMPAT_VERSION := 2.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
define Build/buffalo-rootfs-cksum
( \
echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
$(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \
) >> $@
endef
define Build/edimax-header
$(eval edimax_model=$(word 1,$(1)))
$(STAGING_DIR_HOST)/bin/mkedimaximg \
-b -s CSYS -m $(edimax_model) \
-f 0x70000 -S 0x1200000 \
-i $@ -o $@.new
@mv $@.new $@
endef
define Device/DniImage
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
NETGEAR_BOARD_ID :=
NETGEAR_HW_ID :=
UBINIZE_OPTS := -E 5
IMAGES += factory.img
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | netgear-dni
IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | \
append-metadata
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
define Device/TpSafeImage
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
TPLINK_BOARD_ID :=
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/sysupgrade.bin := append-rootfs | \
tplink-safeloader sysupgrade | append-metadata
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
define Device/ZyXELImage
KERNEL_SUFFIX := -uImage
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
KERNEL = kernel-bin | append-dtb | uImage none | \
pad-to $$(KERNEL_SIZE)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
KERNEL_NAME := zImage
IMAGES += factory.bin
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/factory.bin := append-rootfs | pad-rootfs | \
pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel
IMAGE/sysupgrade.bin/squashfs := append-rootfs | \
pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | \
append-metadata
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
ipq806x: add support for Arris TR4400 v2 / RAC2V1A Hardware specs: SoC: Qualcomm IPQ8065 (dual core Cortex-A15) RAM: 512 MB DDR3 Flash: 256 MB NAND, 32 MB NOR WiFi: QCA9983 2.4 GHz, QCA9984 5 GHz Switch: QCA8337 Ethernet: 5x 10/100/1000 Mbit/s USB: 1x USB 3.0 Type-A Buttons: WPS, Reset Power: 12 VDC, 2.5 A Ethernet ports: 1x WAN: connected to eth2 4x LAN: connected via the switch to eth0 and eth1 (eth0 is disabled in OEM firmware) MAC addresses (OEM and OpenWrt): fw_env @ 0x00 d4:ab:82:??:??:?a LAN (eth1) fw_env @ 0x06 d4:ab:82:??:??:?b WAN (eth2) fw_env @ 0x0c d4:ab:82:??:??:?c WLAN 2.4 GHz (ath1) fw_env @ 0x12 d4:ab:82:??:??:?d WLAN 5 GHz (ath0) fw_env @ 0x18 d4:ab:82:??:??:?e OEM usage unknown (eth0 in OpenWrt) OID d4:ab:82 is registered to: ARRIS Group, Inc., 6450 Sequence Drive, San Diego CA 92121, US More info: https://openwrt.org/inbox/toh/arris/tr4400_v2 IMPORTANT: This port requires moving the 'fw_env' partition prior to first boot to consolidate 70% of the usable space in flash into a contiguous partition. 'fw_env' contains factory-programmed MAC addresses, SSIDs, and passwords. Its contents must be copied to 'rootfs_1' prior to booting via initramfs. Note that the stock 'fw_env' partition will be wiped during sysupgrade. A writable 'stock_fw_env' partition pointing to the old, stock location is included in the port to help rolling back this change if desired. Installation: - Requires serial access and a TFTP server. - Fully boot stock, press ENTER, type in: mtd erase /dev/mtd21 dd if=/dev/mtd22 bs=128K count=1 | mtd write - /dev/mtd21 umount /config && ubidetach -m 23 && mtd erase /dev/mtd23 - Reboot and interrupt U-Boot by pressing a key, type in: set mtdids 'nand0=nand0' set mtdparts 'mtdparts=nand0:155M@0x6500000(mtd_ubi)' set bootcmd 'ubi part mtd_ubi && ubi read 0x44000000 kernel && bootm' env save - Setup TFTP server serving initramfs image as 'recovery.bin', type in: set ipaddr 192.168.1.1 set serverip 192.168.1.2 tftpboot recovery.bin && bootm - Use sysupgrade to install squashfs image. This port is based on work done by AmadeusGhost <amadeus@jmu.edu.cn>. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> [add 5.15 changes for 0069-arm-boot-add-dts-files.patch] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-04-07 06:18:59 +00:00
define Device/arris_tr4400-v2
$(call Device/LegacyImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: add support for Arris TR4400 v2 / RAC2V1A Hardware specs: SoC: Qualcomm IPQ8065 (dual core Cortex-A15) RAM: 512 MB DDR3 Flash: 256 MB NAND, 32 MB NOR WiFi: QCA9983 2.4 GHz, QCA9984 5 GHz Switch: QCA8337 Ethernet: 5x 10/100/1000 Mbit/s USB: 1x USB 3.0 Type-A Buttons: WPS, Reset Power: 12 VDC, 2.5 A Ethernet ports: 1x WAN: connected to eth2 4x LAN: connected via the switch to eth0 and eth1 (eth0 is disabled in OEM firmware) MAC addresses (OEM and OpenWrt): fw_env @ 0x00 d4:ab:82:??:??:?a LAN (eth1) fw_env @ 0x06 d4:ab:82:??:??:?b WAN (eth2) fw_env @ 0x0c d4:ab:82:??:??:?c WLAN 2.4 GHz (ath1) fw_env @ 0x12 d4:ab:82:??:??:?d WLAN 5 GHz (ath0) fw_env @ 0x18 d4:ab:82:??:??:?e OEM usage unknown (eth0 in OpenWrt) OID d4:ab:82 is registered to: ARRIS Group, Inc., 6450 Sequence Drive, San Diego CA 92121, US More info: https://openwrt.org/inbox/toh/arris/tr4400_v2 IMPORTANT: This port requires moving the 'fw_env' partition prior to first boot to consolidate 70% of the usable space in flash into a contiguous partition. 'fw_env' contains factory-programmed MAC addresses, SSIDs, and passwords. Its contents must be copied to 'rootfs_1' prior to booting via initramfs. Note that the stock 'fw_env' partition will be wiped during sysupgrade. A writable 'stock_fw_env' partition pointing to the old, stock location is included in the port to help rolling back this change if desired. Installation: - Requires serial access and a TFTP server. - Fully boot stock, press ENTER, type in: mtd erase /dev/mtd21 dd if=/dev/mtd22 bs=128K count=1 | mtd write - /dev/mtd21 umount /config && ubidetach -m 23 && mtd erase /dev/mtd23 - Reboot and interrupt U-Boot by pressing a key, type in: set mtdids 'nand0=nand0' set mtdparts 'mtdparts=nand0:155M@0x6500000(mtd_ubi)' set bootcmd 'ubi part mtd_ubi && ubi read 0x44000000 kernel && bootm' env save - Setup TFTP server serving initramfs image as 'recovery.bin', type in: set ipaddr 192.168.1.1 set serverip 192.168.1.2 tftpboot recovery.bin && bootm - Use sysupgrade to install squashfs image. This port is based on work done by AmadeusGhost <amadeus@jmu.edu.cn>. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> [add 5.15 changes for 0069-arm-boot-add-dts-files.patch] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2022-04-07 06:18:59 +00:00
DEVICE_VENDOR := Arris
DEVICE_MODEL := TR4400
DEVICE_VARIANT := v2
SOC := qcom-ipq8065
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ath10k-firmware-qca99x0-ct
KERNEL_IN_UBI := 1
endef
TARGET_DEVICES += arris_tr4400-v2
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
define Device/askey_rt4230w-rev6
$(call Device/LegacyImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := Askey
DEVICE_MODEL := RT4230W
DEVICE_VARIANT := REV6
SOC := qcom-ipq8065
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
KERNEL_IN_UBI := 1
endef
TARGET_DEVICES += askey_rt4230w-rev6
define Device/asrock_g10
$(call Device/FitImage)
$(call Device/UbiFit)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
SOC := qcom-ipq8064
DEVICE_VENDOR := ASRock
DEVICE_MODEL := G10
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 5332k
DEVICE_PACKAGES := kmod-i2c-gpio ath10k-firmware-qca99x0-ct
IMAGE/nand-factory.bin := append-ubi | edimax-header RN67
endef
TARGET_DEVICES += asrock_g10
define Device/buffalo_wxr-2533dhp
$(call Device/LegacyImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
SOC := qcom-ipq8064
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WXR-2533DHP
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \
sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += buffalo_wxr-2533dhp
define Device/compex_wpq864
$(call Device/FitImage)
$(call Device/UbiFit)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := Compex
DEVICE_MODEL := WPQ864
BLOCKSIZE := 128k
PAGESIZE := 2048
SOC := qcom-ipq8064
DEVICE_PACKAGES := kmod-gpio-beeper
endef
TARGET_DEVICES += compex_wpq864
define Device/edgecore_ecw5410
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := ECW5410
SOC := qcom-ipq8068
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@v2.0-ap160
ipq806x: remove dangling ipq-wifi-edgecore_ecw5410 should have been part of the ipq-wifi update. Fixes: 8217f02a1c5e ("ipq-wifi: drop upstreamed board-2.bin") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-18 15:08:54 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += edgecore_ecw5410
ipq806x: add support for Extreme Networks AP3935 Extreme Networks AP3935i/e - https://www.extremenetworks.com/support/documentation/access-points-ap3935i-e/ SoC: IPQ8068 QYY AT46279K45060I RAM: NANYA 1527 NT5CC256M16DP-DI 515073W0EF 7 TW FLASH: NOR - S25FL256S1 - 32MB NAND - Macronix MX30UF4G28AB - 512MB LAN: Atheros AR8035-A J5150WL 1515 CN - RGMII LAN2: Atheros AR8033-AL1A SKCSR.AJ1 1444 China - SGMII WLAN2: QCA9990 OVV FNPV209 K451406 WLAN5: QCA9990 OVV FNPV209 K451406 SERIAL: RS232 Port (115200 8n1) Cisco console cable and 4pin Serial Header | 3.3 | GND | RX | TX MAC address for LAN1/LAN2/WLAN 2G/WLAN 5G in uboot env * Installation via either RJ45 console or on-board 4 PIN header Install Method -------------- 1) Setup TFTP server, and place openwrt-ipq806x-generic-extreme_ap3935-initramfs-uImage image in /srv/tftp or similar 2) Connect to console on router and connect ethernet port "LAN1" to your LAN 3) Interupt the boot with any character 4) Login with admin/new2day for default password (use reset/FactoryDefault if password needs to be reset) 5) Set serverip to TFTP IP: set serverip 192.168.1.2 6) Set ipaddr to another IP: set ipaddr 192.168.1.101 7) Make uboot ping something to activate eth0 on boot: set bootcmd 'ping 192.168.1.1; run boot_flash' saveenv 8) TFTP image to RAM: tftpboot 0x42000000 openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage 9) Boot image: bootm 0x42000000 In OpenWRT, "LAN1" is LAN, "LAN2" is WAN 10) SFTP openwrt-ipq806x-generic-extreme_ap3935-squashfs-nand-sysupgrade.bin image to /tmp 11) sysupgrade /tmp/openwrt-*-nand-sysupgrade.bin Signed-off-by: Glen Lee <g2lee@yahoo.com>
2023-06-29 19:58:05 +00:00
define Device/extreme_ap3935
$(call Device/LegacyImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Extreme Networks
DEVICE_MODEL := AP3935
SOC := qcom-ipq8068
PAGESIZE := 2048
BLOCKSIZE := 128k
KERNEL = kernel-bin | append-dtb | uImage none | append-uImage-fakehdr filesystem
KERNEL_LOADADDR = 0x41408000
KERNEL_SIZE := 14400k
KERNEL_SUFFIX := -uImage
UBINIZE_OPTS := -E 5
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += extreme_ap3935
ipq806x: add support for Fortinet FAP-421E Hardware -------- SoC: Qualcomm IPQ8064 RAM: 235MB Flash: 128MB NAND (Micron MT29F1G08ABBDAH4) 32MB SPI-NOR (Spansion FL256SAIFRO) WLAN2: Qualcomm Atheros QCA9980 WLAN5: Qualcomm Atheros QCA9980 ETH: LAN1 - Atheros AR8035 LAN2 - Atheros AR8033 USB: USB-A, 2.0 LED: Power (yellow/amber) LAN1 (yellow/amber) LAN2 (yellow/amber) WLAN2G (yellow) WLAN5G (yellow) BTN: Reset Serial: RJ45 Port (9600 8n1) Cisco console cable, TTL voltage MAC Address: LAN1 (label) at APPSBL partition LAN2: label + 1 WLAN2: label + 8 WLAN5: label + 16 Installation ------------ Connect to the RJ45 console (TTL) Connect LAN1 to host, set host ip as 192.168.1.10 Start a tftp server to serve the initramfs image Open console connection (9600n8) Connect power through the DC jack `Hit any key to stop autoboot: 5`: press any key `Enter G,Q,or H:`: press `K` to access the hidden option `Enter password:`: `fap22b1!$` to access a limited u-boot console `(FAP) #`: `tftpboot your_initramfs_image_name.itb` `(FAP) #`: `bootm` Once OpenWrt has booted, install the firmware through sysupgrade Signed-off-by: JinGen Lim <openwrt@sn.sg>
2024-01-02 16:54:52 +00:00
define Device/fortinet_fap-421e
$(call Device/FitImage)
DEVICE_VENDOR := Fortinet
DEVICE_MODEL := FAP-421E
SOC := qcom-ipq8064
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := fap-421e
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += fortinet_fap-421e
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
define Device/linksys_ea7500-v1
$(call Device/LegacyImage)
ipq806x: Increase kernel size to 4 MB for EA8500/EA7500v1 Increase the kernel size from 3 MB to 4 MB for EA8500 and EA7500v1. * modify the common .dtsi * modify the kernel size in the image recipes Define compat-version 2.0 to force factory image usage for sysupgrade. Add explanation message. Reenable both devices. As for 4MiB (and not more): Hannu Nyman noted that: "We have lots of ipq806x devices with 4 MB kernel, so will need action at that point in future in any case. (Assuming that the bootloader did not have a 4 MB limit that has been tested...)" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (squashed, added 4MiB notice of support in ipq806x) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-24 16:31:48 +00:00
$(Device/kernel-size-migration)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration-from-2_0)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA7500
DEVICE_VARIANT := v1
SOC := qcom-ipq8064
PAGESIZE := 2048
BLOCKSIZE := 128k
ipq806x: Increase kernel size to 4 MB for EA8500/EA7500v1 Increase the kernel size from 3 MB to 4 MB for EA8500 and EA7500v1. * modify the common .dtsi * modify the kernel size in the image recipes Define compat-version 2.0 to force factory image usage for sysupgrade. Add explanation message. Reenable both devices. As for 4MiB (and not more): Hannu Nyman noted that: "We have lots of ipq806x devices with 4 MB kernel, so will need action at that point in future in any case. (Assuming that the bootloader did not have a 4 MB limit that has been tested...)" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (squashed, added 4MiB notice of support in ipq806x) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-24 16:31:48 +00:00
KERNEL_SIZE := 4096k
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
KERNEL = kernel-bin | append-dtb | uImage none | \
append-uImage-fakehdr filesystem
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
UBINIZE_OPTS := -E 5
IMAGES := factory.bin sysupgrade.bin
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | pad-to $$$$(PAGESIZE)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += linksys_ea7500-v1
define Device/linksys_ea8500
$(call Device/LegacyImage)
ipq806x: Increase kernel size to 4 MB for EA8500/EA7500v1 Increase the kernel size from 3 MB to 4 MB for EA8500 and EA7500v1. * modify the common .dtsi * modify the kernel size in the image recipes Define compat-version 2.0 to force factory image usage for sysupgrade. Add explanation message. Reenable both devices. As for 4MiB (and not more): Hannu Nyman noted that: "We have lots of ipq806x devices with 4 MB kernel, so will need action at that point in future in any case. (Assuming that the bootloader did not have a 4 MB limit that has been tested...)" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (squashed, added 4MiB notice of support in ipq806x) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-24 16:31:48 +00:00
$(Device/kernel-size-migration)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration-from-2_0)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA8500
SOC := qcom-ipq8064
PAGESIZE := 2048
BLOCKSIZE := 128k
ipq806x: Increase kernel size to 4 MB for EA8500/EA7500v1 Increase the kernel size from 3 MB to 4 MB for EA8500 and EA7500v1. * modify the common .dtsi * modify the kernel size in the image recipes Define compat-version 2.0 to force factory image usage for sysupgrade. Add explanation message. Reenable both devices. As for 4MiB (and not more): Hannu Nyman noted that: "We have lots of ipq806x devices with 4 MB kernel, so will need action at that point in future in any case. (Assuming that the bootloader did not have a 4 MB limit that has been tested...)" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> (squashed, added 4MiB notice of support in ipq806x) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-24 16:31:48 +00:00
KERNEL_SIZE := 4096k
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
KERNEL = kernel-bin | append-dtb | uImage none | \
append-uImage-fakehdr filesystem
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
BOARD_NAME := ea8500
SUPPORTED_DEVICES += ea8500
UBINIZE_OPTS := -E 5
IMAGES += factory.bin
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += linksys_ea8500
define Device/meraki_mr42
$(call Device/FitImage)
DEVICE_VENDOR := Cisco Meraki
DEVICE_MODEL := MR42
SOC := qcom-ipq8068
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_LOADADDR = 0x44208000
ipq806x: drop swconfig leftovers They are unnecessary since ipq806x switched to DSA in the commit 337e36e0ef988d850105cfa5f7588e36d90aef2b. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Robert Marko <robimarko@gmail.com>
2023-11-25 22:47:08 +00:00
DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform \
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
-uboot-envtools ath10k-firmware-qca9887-ct \
ath10k-firmware-qca99x0-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
kmod-leds-tlc591xx
endef
TARGET_DEVICES += meraki_mr42
define Device/meraki_mr52
$(call Device/FitImage)
DEVICE_VENDOR := Cisco Meraki
DEVICE_MODEL := MR52
SOC := qcom-ipq8068
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_LOADADDR = 0x44208000
DEVICE_DTS_CONFIG := config@2
ipq806x: drop swconfig leftovers They are unnecessary since ipq806x switched to DSA in the commit 337e36e0ef988d850105cfa5f7588e36d90aef2b. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by: Robert Marko <robimarko@gmail.com>
2023-11-25 22:47:08 +00:00
DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform \
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
-uboot-envtools ath10k-firmware-qca9887-ct \
ath10k-firmware-qca9984-ct kmod-eeprom-at24 kmod-hwmon-ina2xx \
kmod-leds-tlc591xx
endef
TARGET_DEVICES += meraki_mr52
define Device/nec_wg2600hp
$(call Device/LegacyImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := NEC
DEVICE_MODEL := Aterm WG2600HP
SOC := qcom-ipq8064
BLOCKSIZE := 64k
BOARD_NAME := wg2600hp
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
pad-rootfs | append-metadata
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += nec_wg2600hp
define Device/nec_wg2600hp3
$(call Device/LegacyImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := NEC Platforms
DEVICE_MODEL := Aterm WG2600HP3
SOC := qcom-ipq8062
BLOCKSIZE := 64k
IMAGES := sysupgrade.bin
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
pad-rootfs | append-metadata
DEVICE_PACKAGES := -kmod-ata-ahci -kmod-ata-ahci-platform \
-kmod-usb-ohci -kmod-usb2 -kmod-usb-ledtrig-usbport \
ipq806x: use new package name for NEC WG2600HP3 commit 0c45ad41e15e2255 changes ipq806x usb kmod name from usb-phy-qcom-dwc3 to phy-qcom-ipq806x-usb, so use new name. Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
2023-05-31 07:28:31 +00:00
-kmod-phy-qcom-ipq806x-usb -kmod-usb3 -kmod-usb-dwc3-qcom \
ipq-wifi: drop upstreamed board-2.bin The BDFs for the: Aruba AP-303 ASUS RT-AC42U AVM FRITZ!Repeater 1200 Buffalo WTR-M2133HP Cell C RTL30VW D-Link DAP-2610 EnGenius EAP2200 EnGenius EMD1 EnGenius EMR3500 EnGenius EMR5000 EZVIZ CS-W3-WD1200G EUP Google Wifi Linksys MR8300 V1.0 Luma WRTQ-329ACN MobiPromo CM520-79F NEC Platforms WG2600HP3 Plasma Cloud PA1200 (updated version) Plasma Cloud PA2200 ZTE MF286D were upstreamed to the ath10k-firmware repository and landed in linux-firmware.git. Furthermore the BDFs for the: 8devices Habanero OpenMesh A62 OpenMesh A42 AVM FRITZ!Box 4040 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-05-13 20:25:36 +00:00
ath10k-firmware-qca9984-ct
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += nec_wg2600hp3
define Device/netgear_d7800
$(call Device/DniImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := Nighthawk X4 D7800
SOC := qcom-ipq8064
KERNEL_SIZE := 4096k
NETGEAR_BOARD_ID := D7800
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := d7800
SUPPORTED_DEVICES += d7800
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
ipq806x: Enlarge D7800 flash - use netgear partition Increase the available flash memory size in Netgear R7800 by repurposing the unused "netgear" partition that is located after the firmware partition. Available flash space for kernel+rootfs+overlay increases by 68 MB from 32 MB to 100 MB. In a typical build, overlay space increases from 15 to 85, increasing the package installation possibilities greatly. Reverting to the OEM firmware is still possible, as the OEM firmware contains logic to initialise the "netgear" partition if its contents do not match expectations. In OEM firmware, "netgear" contains 6 UBI sub-partitions that are defined in /etc/netgear.cfg and initialisation is done by /etc/preinit This is based on https://github.com/openwrt/openwrt/commit/fb8a578aa70572b3e56b64d296e22c2931e77b69 Signed-off-by: Mike Lothian <mike@fireburn.co.uk>
2021-05-17 09:15:20 +00:00
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := Sysupgrade does not work due to rootfs ubi partition size change. \
Use factory image with the TFTP recovery flash routine.
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += netgear_d7800
define Device/netgear_r7500
$(call Device/DniImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := Nighthawk X4 R7500
DEVICE_VARIANT := v1
SOC := qcom-ipq8064
KERNEL_SIZE := 4096k
NETGEAR_BOARD_ID := R7500
NETGEAR_HW_ID := 29764841+0+128+256+3x3+4x4
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := r7500
SUPPORTED_DEVICES += r7500
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += netgear_r7500
define Device/netgear_r7500v2
$(call Device/DniImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := Nighthawk X4 R7500
DEVICE_VARIANT := v2
SOC := qcom-ipq8064
KERNEL_SIZE := 4096k
NETGEAR_BOARD_ID := R7500v2
NETGEAR_HW_ID := 29764958+0+128+512+3x3+4x4
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := r7500v2
SUPPORTED_DEVICES += r7500v2
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct \
ath10k-firmware-qca988x-ct
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += netgear_r7500v2
define Device/netgear_r7800
$(call Device/DniImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := Nighthawk X4S R7800
SOC := qcom-ipq8065
KERNEL_SIZE := 4096k
NETGEAR_BOARD_ID := R7800
NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4+cascade
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := r7800
SUPPORTED_DEVICES += r7800
ipq806x: provide ramoops for R7800/XR500 by default Add kmod-ramoops to the default set of device packages in R7800 and XR500, so that the ramoops kernel crash logs are provided by default for these routers. The capability was earlier defined by 97158fe1 and cf346dfa, but the feature was not yet turned on by default. The possible kernel crashes are stored into /sys/fs/pstore/* Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2022-03-06 09:56:15 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ramoops
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += netgear_r7800
ipq806x: Add support for Netgear Nighthawk Pro Gaming XR450 Motivation: Firmware with platform ID "XR450" required for easy installation. Manufacturer pages: Product page: https://www.netgear.com/support/product/xr450 Product Data Sheet: https://www.netgear.com/images/datasheet/networking/wifirouter/XR450.pdf Current firmware: https://www.downloads.netgear.com/files/GDC/XR450/XR450-V2.3.2.134.zip Specifications: Almost identical to Netgear XR500(https://openwrt.org/toh/hwdata/netgear/netgear_xr500) Differences: Platform ID: XR450, utilized for firmware validation WLAN 2.4GHz: b/g/n Supports QAM64 (XR500 QAM256) SoC: Qualcomm Atheros IPQ8065 RAM: 512 MB Storage: 256 MiB Wireless: Qualcomm Atheros QCA9984 Switch: Qualcomm Atheros AR8337 rev. 2 Ethernet: 5x 1000/100/10 USB: 2x 3.0 Install via WEB GUI (recommended): 1. Navigate within GUI to firmware update section 2. Select openwrt-ipq806x-netgear_xr450-squashfs-factory.img 3. Dismiss downgrade warning Install via TFTP recovery (same as XR500/R7800): 1. Configure host PC to use static address 192.168.1.10 https://openwrt.org/toh/netgear/r7800#prerequisites_for_tftp_flashing 2. Flash openwrt-ipq806x-netgear_xr450-squashfs-factory.img using procedure https://openwrt.org/toh/netgear/r7800#tftp_flashing_process Revert to stock firmware 1. Download current manufacturer firmware, decompress zip file to obtain img file 2. Use TFTP recovery method flash img file (currently XR450-V2.3.2.134.img) ipq806x: add support to netgear_xr450 Signed-off-by: Andrzej Mialkowski <andrzej.mialkowski@gmail.com>
2023-05-19 11:09:54 +00:00
define Device/netgear_xr450
$(call Device/DniImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: Add support for Netgear Nighthawk Pro Gaming XR450 Motivation: Firmware with platform ID "XR450" required for easy installation. Manufacturer pages: Product page: https://www.netgear.com/support/product/xr450 Product Data Sheet: https://www.netgear.com/images/datasheet/networking/wifirouter/XR450.pdf Current firmware: https://www.downloads.netgear.com/files/GDC/XR450/XR450-V2.3.2.134.zip Specifications: Almost identical to Netgear XR500(https://openwrt.org/toh/hwdata/netgear/netgear_xr500) Differences: Platform ID: XR450, utilized for firmware validation WLAN 2.4GHz: b/g/n Supports QAM64 (XR500 QAM256) SoC: Qualcomm Atheros IPQ8065 RAM: 512 MB Storage: 256 MiB Wireless: Qualcomm Atheros QCA9984 Switch: Qualcomm Atheros AR8337 rev. 2 Ethernet: 5x 1000/100/10 USB: 2x 3.0 Install via WEB GUI (recommended): 1. Navigate within GUI to firmware update section 2. Select openwrt-ipq806x-netgear_xr450-squashfs-factory.img 3. Dismiss downgrade warning Install via TFTP recovery (same as XR500/R7800): 1. Configure host PC to use static address 192.168.1.10 https://openwrt.org/toh/netgear/r7800#prerequisites_for_tftp_flashing 2. Flash openwrt-ipq806x-netgear_xr450-squashfs-factory.img using procedure https://openwrt.org/toh/netgear/r7800#tftp_flashing_process Revert to stock firmware 1. Download current manufacturer firmware, decompress zip file to obtain img file 2. Use TFTP recovery method flash img file (currently XR450-V2.3.2.134.img) ipq806x: add support to netgear_xr450 Signed-off-by: Andrzej Mialkowski <andrzej.mialkowski@gmail.com>
2023-05-19 11:09:54 +00:00
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := Nighthawk XR450
SOC := qcom-ipq8065
KERNEL_SIZE := 4096k
NETGEAR_BOARD_ID := XR450
NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ramoops
endef
TARGET_DEVICES += netgear_xr450
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
define Device/netgear_xr500
$(call Device/DniImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := Nighthawk XR500
SOC := qcom-ipq8065
KERNEL_SIZE := 4096k
NETGEAR_BOARD_ID := XR500
NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
BLOCKSIZE := 128k
PAGESIZE := 2048
ipq806x: provide ramoops for R7800/XR500 by default Add kmod-ramoops to the default set of device packages in R7800 and XR500, so that the ramoops kernel crash logs are provided by default for these routers. The capability was earlier defined by 97158fe1 and cf346dfa, but the feature was not yet turned on by default. The possible kernel crashes are stored into /sys/fs/pstore/* Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2022-03-06 09:56:15 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-ramoops
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += netgear_xr500
ipq806x: add support for Nokia Airscale AC400i Hardware -------- SoC: Qualcomm IPQ8065 RAM: 512 MB DDR3 Flash: 256 MB NAND (Macronix MX30UF2G18AC) (split into 2x128MB) 4 MB SPI-NOR (Macronix MX25U3235F) WLAN: Qualcomm Atheros QCA9984 - 2.4Ghz Qualcomm Atheros QCA9984 - 5Ghz ETH: eth0 - POE (100Mbps in U-Boot, 1000Mbps in OpenWrt) eth1 - (1000Mbps in both) Auto-negotiation broken on both. USB: USB 2.0 LED: 5G, 2.4G, ETH1, ETH2, CTRL, PWR (All support green and red) BTN: Reset Other: SD card slot (non-functional) Serial: 115200bps, near the Ethernet transformers, labeled 9X. Connections from the arrow to the 9X text: [NC] - [TXD] - [GND] - [RXD] - [NC] Installation ------------ 0. Connect to the device Plug your computer into LAN2 (1000Mbps connection required). If you use the LAN1/POE port, set your computer to force a 100Mbps link. Connect to the device via TTL (Serial) 115200n8. Locate the header (or solder pads) labeled 9X, near the Ethernet jacks/transformers. There should be an arrow on the other side of the header marking. The connections should go like this: (from the arrow to the 9X text): NC - TXD - GND - RXD - NC 1. Prepare for installation While the AP is powering up, interrupt the startup process. MAKE SURE TO CHECK YOUR CURRENT PARTITION! If you see: "Current Partition is : partB" or "Need to switch partition from partA to partB", you have to force the device into partA mode, before continuing. This can be done by changing the PKRstCnt to 5 and resetting the device. setenv PKRstCnt 5 saveenv reset After you interrupt the startup process again, you should see: Need to switch partition from partB to partA You can now continue to the next step. If you see: "Current Partition is : partA", you can continue to the next step. 2. Prevent partition switching. To prevent the device from switching partitions, we are going to modify the startup command. set bootcmd "setenv PKRstCnt 0; saveenv; bootipq" setenv 3. First boot Now, we have to boot the OpenWrt intifs. The easiest way to do this is by using Tiny PXE. You can also use the normal U-Boot tftp method. Run "bootp" this will get an IP from the DHCP server and possibly the firmware image. If it doesn't download the firmware image, run "tftpboot". Now run "bootm" to run the image. You might see: "ERROR: new format image overwritten - must RESET the board to recover" this means that the image you are trying to load is too big. Use a smaller image for the initial boot. 4. Install OpenWrt from initfs Once you are booted into OpenWrt, transfer the OpenWrt upgrade image and use sysupgrade to install OpenWrt to the device. Signed-off-by: Kristjan Krušič <kristjan.krusic@krusic22.com>
2023-02-04 16:00:57 +00:00
define Device/nokia_ac400i
$(call Device/FitImage)
$(call Device/UbiFit)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: add support for Nokia Airscale AC400i Hardware -------- SoC: Qualcomm IPQ8065 RAM: 512 MB DDR3 Flash: 256 MB NAND (Macronix MX30UF2G18AC) (split into 2x128MB) 4 MB SPI-NOR (Macronix MX25U3235F) WLAN: Qualcomm Atheros QCA9984 - 2.4Ghz Qualcomm Atheros QCA9984 - 5Ghz ETH: eth0 - POE (100Mbps in U-Boot, 1000Mbps in OpenWrt) eth1 - (1000Mbps in both) Auto-negotiation broken on both. USB: USB 2.0 LED: 5G, 2.4G, ETH1, ETH2, CTRL, PWR (All support green and red) BTN: Reset Other: SD card slot (non-functional) Serial: 115200bps, near the Ethernet transformers, labeled 9X. Connections from the arrow to the 9X text: [NC] - [TXD] - [GND] - [RXD] - [NC] Installation ------------ 0. Connect to the device Plug your computer into LAN2 (1000Mbps connection required). If you use the LAN1/POE port, set your computer to force a 100Mbps link. Connect to the device via TTL (Serial) 115200n8. Locate the header (or solder pads) labeled 9X, near the Ethernet jacks/transformers. There should be an arrow on the other side of the header marking. The connections should go like this: (from the arrow to the 9X text): NC - TXD - GND - RXD - NC 1. Prepare for installation While the AP is powering up, interrupt the startup process. MAKE SURE TO CHECK YOUR CURRENT PARTITION! If you see: "Current Partition is : partB" or "Need to switch partition from partA to partB", you have to force the device into partA mode, before continuing. This can be done by changing the PKRstCnt to 5 and resetting the device. setenv PKRstCnt 5 saveenv reset After you interrupt the startup process again, you should see: Need to switch partition from partB to partA You can now continue to the next step. If you see: "Current Partition is : partA", you can continue to the next step. 2. Prevent partition switching. To prevent the device from switching partitions, we are going to modify the startup command. set bootcmd "setenv PKRstCnt 0; saveenv; bootipq" setenv 3. First boot Now, we have to boot the OpenWrt intifs. The easiest way to do this is by using Tiny PXE. You can also use the normal U-Boot tftp method. Run "bootp" this will get an IP from the DHCP server and possibly the firmware image. If it doesn't download the firmware image, run "tftpboot". Now run "bootm" to run the image. You might see: "ERROR: new format image overwritten - must RESET the board to recover" this means that the image you are trying to load is too big. Use a smaller image for the initial boot. 4. Install OpenWrt from initfs Once you are booted into OpenWrt, transfer the OpenWrt upgrade image and use sysupgrade to install OpenWrt to the device. Signed-off-by: Kristjan Krušič <kristjan.krusic@krusic22.com>
2023-02-04 16:00:57 +00:00
DEVICE_VENDOR := Nokia
DEVICE_MODEL := AC400i
SOC := qcom-ipq8065
DEVICE_DTS := qcom-ipq8065-ac400i
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := ac400i
ipq-wifi: drop upstreamed board-2.bin The BDFs for the: Aruba AP-365 Devolo Magic 2 WiFi next Edgecore ECW5410 Edgecore OAP100 Extreme Networks WS-AP3915i GL.iNet GL-A1300 GL.iNet GL-AP1300 GL.iNet GL-S1300 Linksys EA8300 Linksys WHW03v2 Nokia Wi4A AC400i P&W R619AC Pakedge WR-1 Qxwlan E2600AC C1 Sony NCP-HG100/Cellular Teltonika RUTX10 ZTE MF18A were upstreamed to the ath10k-firmware repository and landed in linux-firmware.git. Furthermore the BDFs for the: 8devices Habanero 8devices Jalapeno Qxwlan E2600AC C2 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-17 20:02:40 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
ipq806x: add support for Nokia Airscale AC400i Hardware -------- SoC: Qualcomm IPQ8065 RAM: 512 MB DDR3 Flash: 256 MB NAND (Macronix MX30UF2G18AC) (split into 2x128MB) 4 MB SPI-NOR (Macronix MX25U3235F) WLAN: Qualcomm Atheros QCA9984 - 2.4Ghz Qualcomm Atheros QCA9984 - 5Ghz ETH: eth0 - POE (100Mbps in U-Boot, 1000Mbps in OpenWrt) eth1 - (1000Mbps in both) Auto-negotiation broken on both. USB: USB 2.0 LED: 5G, 2.4G, ETH1, ETH2, CTRL, PWR (All support green and red) BTN: Reset Other: SD card slot (non-functional) Serial: 115200bps, near the Ethernet transformers, labeled 9X. Connections from the arrow to the 9X text: [NC] - [TXD] - [GND] - [RXD] - [NC] Installation ------------ 0. Connect to the device Plug your computer into LAN2 (1000Mbps connection required). If you use the LAN1/POE port, set your computer to force a 100Mbps link. Connect to the device via TTL (Serial) 115200n8. Locate the header (or solder pads) labeled 9X, near the Ethernet jacks/transformers. There should be an arrow on the other side of the header marking. The connections should go like this: (from the arrow to the 9X text): NC - TXD - GND - RXD - NC 1. Prepare for installation While the AP is powering up, interrupt the startup process. MAKE SURE TO CHECK YOUR CURRENT PARTITION! If you see: "Current Partition is : partB" or "Need to switch partition from partA to partB", you have to force the device into partA mode, before continuing. This can be done by changing the PKRstCnt to 5 and resetting the device. setenv PKRstCnt 5 saveenv reset After you interrupt the startup process again, you should see: Need to switch partition from partB to partA You can now continue to the next step. If you see: "Current Partition is : partA", you can continue to the next step. 2. Prevent partition switching. To prevent the device from switching partitions, we are going to modify the startup command. set bootcmd "setenv PKRstCnt 0; saveenv; bootipq" setenv 3. First boot Now, we have to boot the OpenWrt intifs. The easiest way to do this is by using Tiny PXE. You can also use the normal U-Boot tftp method. Run "bootp" this will get an IP from the DHCP server and possibly the firmware image. If it doesn't download the firmware image, run "tftpboot". Now run "bootm" to run the image. You might see: "ERROR: new format image overwritten - must RESET the board to recover" this means that the image you are trying to load is too big. Use a smaller image for the initial boot. 4. Install OpenWrt from initfs Once you are booted into OpenWrt, transfer the OpenWrt upgrade image and use sysupgrade to install OpenWrt to the device. Signed-off-by: Kristjan Krušič <kristjan.krusic@krusic22.com>
2023-02-04 16:00:57 +00:00
endef
TARGET_DEVICES += nokia_ac400i
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
define Device/qcom_ipq8064-ap148
$(call Device/FitImage)
$(call Device/UbiFit)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := Qualcomm
DEVICE_MODEL := AP148
DEVICE_VARIANT := standard
SOC := qcom-ipq8064
DEVICE_DTS := qcom-ipq8064-ap148
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := ap148
SUPPORTED_DEVICES += ap148
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += qcom_ipq8064-ap148
define Device/qcom_ipq8064-ap148-legacy
$(call Device/LegacyImage)
$(call Device/UbiFit)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := Qualcomm
DEVICE_MODEL := AP148
DEVICE_VARIANT := legacy
SOC := qcom-ipq8064
DEVICE_DTS := qcom-ipq8064-ap148
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := ap148
SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += qcom_ipq8064-ap148-legacy
define Device/qcom_ipq8064-ap161
$(call Device/FitImage)
$(call Device/UbiFit)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := Qualcomm
DEVICE_MODEL := AP161
SOC := qcom-ipq8064
DEVICE_DTS := qcom-ipq8064-ap161
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := ap161
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += qcom_ipq8064-ap161
define Device/qcom_ipq8064-db149
$(call Device/FitImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := Qualcomm
DEVICE_MODEL := DB149
SOC := qcom-ipq8064
DEVICE_DTS := qcom-ipq8064-db149
KERNEL_INSTALL := 1
BOARD_NAME := db149
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
endef
TARGET_DEVICES += qcom_ipq8064-db149
define Device/tplink_ad7200
$(call Device/TpSafeImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := AD7200
DEVICE_VARIANT := v1/v2
DEVICE_ALT0_VENDOR := TP-Link
DEVICE_ALT0_MODEL := Talon AD7200
DEVICE_ALT0_VARIANT := v1/v2
SOC := qcom-ipq8064
BLOCKSIZE := 128k
PAGESIZE := 2048
TPLINK_BOARD_ID := AD7200
ipq806x: kernel ramoops storage for C2600/AD7200 Define the kernel crash log storage ramoops/pstore feature for C2600/AD7200 and add kmod-ramoops to default. Tested with C2600 only. Signed-off-by: Edward Matijevic <motolav@gmail.com>
2022-11-06 19:12:36 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-ramoops kmod-wil6210
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += tplink_ad7200
define Device/tplink_c2600
$(call Device/TpSafeImage)
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := Archer C2600
DEVICE_VARIANT := v1
SOC := qcom-ipq8064
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := c2600
SUPPORTED_DEVICES += c2600
TPLINK_BOARD_ID := C2600
ipq806x: kernel ramoops storage for C2600/AD7200 Define the kernel crash log storage ramoops/pstore feature for C2600/AD7200 and add kmod-ramoops to default. Tested with C2600 only. Signed-off-by: Edward Matijevic <motolav@gmail.com>
2022-11-06 19:12:36 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-ramoops
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += tplink_c2600
define Device/tplink_vr2600v
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := Archer VR2600v
DEVICE_VARIANT := v1
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
ipq806x: convert TP-Link Archer VR2600v to denx,uimage The recent device-tree modification that added pre-cal nvmem-cells pushed the device's kernel+dtb over the allotted 3072k KERNEL_SIZE. > WARNING: Image file tplink_vr2600v-uImage is too big: 3147214 > 3145728 There was a previous kernel partition size upgrade: commit 0c967d92b3d9 ("ipq806x: increase kernel partition size for the TP-Link Archer VR2600v") It has been seemingly upgraded from a 2048k KERNEL_SIZE in the past. The commit talks about using the MTD_SPLIT_TPLINK_FW. But looking at the image make recipe, there is no code that adds a TPLINK header. So instead the board will use "denx,umimage". This requires MTD_SPLIT_UIMAGE_FW, but this is present thanks to some NEC devices. (Maybe the MTD_CONFIG_ARGS can be removed as well? But it could be there because of the padding at the beginning. This needs testing.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-06 13:24:32 +00:00
IMAGE_SIZE := 12672k
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
SOC := qcom-ipq8064
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := vr2600v
SUPPORTED_DEVICES += vr2600v
DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | \
ipq806x: convert TP-Link Archer VR2600v to denx,uimage The recent device-tree modification that added pre-cal nvmem-cells pushed the device's kernel+dtb over the allotted 3072k KERNEL_SIZE. > WARNING: Image file tplink_vr2600v-uImage is too big: 3147214 > 3145728 There was a previous kernel partition size upgrade: commit 0c967d92b3d9 ("ipq806x: increase kernel partition size for the TP-Link Archer VR2600v") It has been seemingly upgraded from a 2048k KERNEL_SIZE in the past. The commit talks about using the MTD_SPLIT_TPLINK_FW. But looking at the image make recipe, there is no code that adds a TPLINK header. So instead the board will use "denx,umimage". This requires MTD_SPLIT_UIMAGE_FW, but this is present thanks to some NEC devices. (Maybe the MTD_CONFIG_ARGS can be removed as well? But it could be there because of the padding at the beginning. This needs testing.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-02-06 13:24:32 +00:00
append-rootfs | pad-rootfs | append-metadata
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += tplink_vr2600v
define Device/ubnt_unifi-ac-hd
$(call Device/FitImageLzma)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi AC HD
SOC := qcom-ipq8064
BLOCKSIZE := 64k
IMAGE_SIZE := 14784k
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | append-metadata
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
endef
TARGET_DEVICES += ubnt_unifi-ac-hd
define Device/zyxel_nbg6817
ipq806x: convert each device to DSA implementation Convert each ipq806x device to DSA implementation using the qca8k driver. Rework 02_network to follow the new naming scheme. Update 01_leds to use netdev trigger with correct DSA port and drop now unused switch trigger. Currently secondary CPU is disabled and will be reneabled later. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2021-08-06 10:40:54 +00:00
$(Device/dsa-migration)
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NBG6817
SOC := qcom-ipq8065
KERNEL_SIZE := 4096k
BLOCKSIZE := 64k
BOARD_NAME := nbg6817
RAS_BOARD := NBG6817
RAS_ROOTFS_SIZE := 20934k
RAS_VERSION := "V1.99(OWRT.9999)C0"
SUPPORTED_DEVICES += nbg6817
ipq806x: janitorial work, respect line lengths This commit breaks up some lines so that they are shorter than 74 charcters. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:43:57 +00:00
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs \
kmod-fs-ext4 losetup
ipq806x: modularize generic subtarget This commit moves the device profiles within the ipq806x/generic subtarget into their own includable .mk file, to support eventually having subtargets other than generic. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
2022-01-01 21:25:27 +00:00
$(call Device/ZyXELImage)
endef
TARGET_DEVICES += zyxel_nbg6817
Reference in New Issue Copy Permalink