2006-10-04 20:05:48 +00:00
|
|
|
#!/bin/sh /etc/rc.common
|
2012-07-01 11:32:46 +00:00
|
|
|
# Copyright (C) 2007-2012 OpenWrt.org
|
2006-10-04 20:05:48 +00:00
|
|
|
|
2016-07-29 12:56:35 +00:00
|
|
|
START=19
|
2011-11-07 22:58:45 +00:00
|
|
|
|
2013-09-17 21:45:30 +00:00
|
|
|
USE_PROCD=1
|
|
|
|
PROG=/usr/sbin/dnsmasq
|
2011-11-07 22:58:45 +00:00
|
|
|
|
2012-07-01 11:32:46 +00:00
|
|
|
ADD_LOCAL_DOMAIN=1
|
|
|
|
ADD_LOCAL_HOSTNAME=1
|
dnsmasq: expand 'add_local_hostname' fexibility including FQDN
ref commit 612e2276b4a2f57fcbbe79b95bec4a46e89d748c
ref commit ec63e3bf1312ab4c666f7417ca9844857214047f
'option add_local_hostname' scripted implementation statically assigns
this host in auto generated host file at init. If IFUP or other signals
do not occur, then address changes are not tracked. The script doesn't
apply all the addresses at an interface. This may make logs obscure.
The script only puts the bare host name (maybe not FQDN) in host file,
but if '--exapandhosts' is enabled, then /etc/hosts entries will be
suffixed, and "127.0.0.1 localhost" becomes "localhost.lan".
dnsmasq provides an option to perform this function, but it is rather
greedy. '--interface-name=<name>,<iface>' will assign the name to all
IP on the specified interface (except link local). This is a useful
feature, but some setups depend on the original restrictive behavior.
'option add_local_fqdn' is added to enhance the feature set, but
if not entered or empty string, then it will default to original
option and behavior. This new option has a few settings. At each
increased setting the most detailed name becomes the PTR record:
0 - same as add_local_hostname 0 or disabled
1 - same as add_local_hostname 1
2 - assigns the bare host name to all IP w/ --dnsmasq-interface
3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface
4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface
'option add_wan_fqdn' is added to run the same procedure on
inferred WAN intefaces. If an interface has 'config dhcp' and
'option ignore 1' set, then it is considered WAN. The original
option would only run on DHCP serving interfaces.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
2017-01-14 02:37:25 +00:00
|
|
|
ADD_WAN_FQDN=0
|
|
|
|
ADD_LOCAL_FQDN=""
|
2012-07-01 11:32:46 +00:00
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
BASECONFIGFILE="/var/etc/dnsmasq.conf"
|
|
|
|
BASEHOSTFILE="/tmp/hosts/dhcp"
|
|
|
|
BASETIMESTAMPFILE="/etc/dnsmasq.time"
|
2014-06-18 10:04:29 +00:00
|
|
|
TRUSTANCHORSFILE="/usr/share/dnsmasq/trust-anchors.conf"
|
2016-06-14 10:00:21 +00:00
|
|
|
TIMEVALIDFILE="/var/state/dnsmasqsec"
|
2016-10-12 08:33:16 +00:00
|
|
|
BASEDHCPSTAMPFILE="/var/run/dnsmasq"
|
2012-04-02 22:31:21 +00:00
|
|
|
|
|
|
|
xappend() {
|
|
|
|
local value="$1"
|
|
|
|
|
2016-06-13 13:21:47 +00:00
|
|
|
echo "${value#--}" >> $CONFIGFILE_TMP
|
2012-04-02 22:31:21 +00:00
|
|
|
}
|
|
|
|
|
2015-08-31 17:11:41 +00:00
|
|
|
hex_to_hostid() {
|
2016-12-22 18:24:12 +00:00
|
|
|
local var="$1"
|
|
|
|
local hex="${2#0x}" # strip optional "0x" prefix
|
|
|
|
|
|
|
|
if [ -n "${hex//[0-9a-fA-F]/}" ]; then
|
|
|
|
# is invalid hex literal
|
|
|
|
return 1
|
|
|
|
fi
|
|
|
|
|
|
|
|
# convert into host id
|
|
|
|
export "$var=$(
|
|
|
|
printf "%0x:%0x" \
|
|
|
|
$(((0x$hex >> 16) % 65536)) \
|
|
|
|
$(( 0x$hex % 65536))
|
|
|
|
)"
|
|
|
|
|
|
|
|
return 0
|
2015-08-31 17:11:41 +00:00
|
|
|
}
|
|
|
|
|
2007-03-17 13:31:13 +00:00
|
|
|
dhcp_calc() {
|
|
|
|
local ip="$1"
|
|
|
|
local res=0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2007-03-17 13:31:13 +00:00
|
|
|
while [ -n "$ip" ]; do
|
|
|
|
part="${ip%%.*}"
|
|
|
|
res="$(($res * 256))"
|
|
|
|
res="$(($res + $part))"
|
|
|
|
[ "${ip%.*}" != "$ip" ] && ip="${ip#*.}" || ip=
|
|
|
|
done
|
|
|
|
echo "$res"
|
|
|
|
}
|
|
|
|
|
2013-12-21 13:31:28 +00:00
|
|
|
dhcp_check() {
|
|
|
|
local ifname="$1"
|
2016-10-12 08:33:16 +00:00
|
|
|
local stamp="${BASEDHCPSTAMPFILE_CFG}.${ifname}.dhcp"
|
2013-12-21 13:31:28 +00:00
|
|
|
local rv=0
|
|
|
|
|
|
|
|
[ -s "$stamp" ] && return $(cat "$stamp")
|
|
|
|
|
2016-07-29 12:26:55 +00:00
|
|
|
# If there's no carrier yet, skip this interface.
|
|
|
|
# The init script will be called again once the link is up
|
|
|
|
case "$(devstatus "$ifname" | jsonfilter -e @.carrier)" in
|
|
|
|
false) return 1;;
|
|
|
|
esac
|
|
|
|
|
2013-12-21 13:31:28 +00:00
|
|
|
udhcpc -n -q -s /bin/true -t 1 -i "$ifname" >&- && rv=1 || rv=0
|
|
|
|
|
|
|
|
[ $rv -eq 1 ] && \
|
|
|
|
logger -t dnsmasq \
|
|
|
|
"found already running DHCP-server on interface '$ifname'" \
|
|
|
|
"refusing to start, use 'option force 1' to override"
|
|
|
|
|
|
|
|
echo $rv > "$stamp"
|
|
|
|
return $rv
|
|
|
|
}
|
|
|
|
|
|
|
|
log_once() {
|
|
|
|
pidof dnsmasq >/dev/null || \
|
|
|
|
logger -t dnsmasq "$@"
|
|
|
|
}
|
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
append_bool() {
|
|
|
|
local section="$1"
|
|
|
|
local option="$2"
|
|
|
|
local value="$3"
|
2007-09-25 23:16:31 +00:00
|
|
|
local _loctmp
|
2010-07-17 13:36:13 +00:00
|
|
|
config_get_bool _loctmp "$section" "$option" 0
|
2012-04-02 22:31:21 +00:00
|
|
|
[ $_loctmp -gt 0 ] && xappend "$value"
|
2007-09-25 23:16:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
append_parm() {
|
|
|
|
local section="$1"
|
|
|
|
local option="$2"
|
|
|
|
local switch="$3"
|
2015-12-17 02:23:03 +00:00
|
|
|
local default="$4"
|
2007-09-25 23:16:31 +00:00
|
|
|
local _loctmp
|
2015-12-17 02:23:03 +00:00
|
|
|
config_get _loctmp "$section" "$option" "$default"
|
2007-09-25 23:16:31 +00:00
|
|
|
[ -z "$_loctmp" ] && return 0
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "$switch=$_loctmp"
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
2009-01-27 22:58:11 +00:00
|
|
|
append_server() {
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--server=$1"
|
2009-01-27 22:58:11 +00:00
|
|
|
}
|
|
|
|
|
2012-07-05 17:54:14 +00:00
|
|
|
append_address() {
|
|
|
|
xappend "--address=$1"
|
|
|
|
}
|
|
|
|
|
2014-12-17 05:59:12 +00:00
|
|
|
append_ipset() {
|
|
|
|
xappend "--ipset=$1"
|
|
|
|
}
|
|
|
|
|
2009-05-05 09:33:56 +00:00
|
|
|
append_interface() {
|
2016-07-29 18:58:14 +00:00
|
|
|
network_get_device ifname "$1" || return
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--interface=$ifname"
|
2009-05-05 09:33:56 +00:00
|
|
|
}
|
|
|
|
|
2009-09-16 18:15:31 +00:00
|
|
|
append_notinterface() {
|
2016-07-29 18:58:14 +00:00
|
|
|
network_get_device ifname "$1" || return
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--except-interface=$ifname"
|
2009-09-16 18:15:31 +00:00
|
|
|
}
|
|
|
|
|
2009-11-22 11:52:08 +00:00
|
|
|
append_addnhosts() {
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--addn-hosts=$1"
|
2009-11-22 11:52:08 +00:00
|
|
|
}
|
|
|
|
|
2010-08-11 10:37:33 +00:00
|
|
|
append_bogusnxdomain() {
|
2013-09-23 21:58:36 +00:00
|
|
|
xappend "--bogus-nxdomain=$1"
|
2010-08-11 10:37:33 +00:00
|
|
|
}
|
|
|
|
|
2015-03-13 08:39:08 +00:00
|
|
|
append_pxe_service() {
|
|
|
|
xappend "--pxe-service=$1"
|
|
|
|
}
|
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
filter_dnsmasq() {
|
|
|
|
local cfg="$1" func="$2" match_cfg="$3" found_cfg
|
2012-04-02 22:31:21 +00:00
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
# use entry when no instance entry set, or if it matches
|
|
|
|
config_get found_cfg "$cfg" "instance"
|
|
|
|
if [ -z "$found_cfg" -o "$found_cfg" = "$match_cfg" ]; then
|
|
|
|
$func $cfg
|
2015-12-17 02:23:03 +00:00
|
|
|
fi
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
dhcp_subscrid_add() {
|
|
|
|
local cfg="$1"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
[ -n "$networkid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
config_get subscriberid "$cfg" subscriberid
|
|
|
|
[ -n "$subscriberid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--dhcp-subscrid=$networkid,$subscriberid"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-05-19 20:17:56 +00:00
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
dhcp_remoteid_add() {
|
|
|
|
local cfg="$1"
|
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
[ -n "$networkid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
config_get remoteid "$cfg" remoteid
|
|
|
|
[ -n "$remoteid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--dhcp-remoteid=$networkid,$remoteid"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-05-19 20:17:56 +00:00
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
dhcp_circuitid_add() {
|
|
|
|
local cfg="$1"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
[ -n "$networkid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
config_get circuitid "$cfg" circuitid
|
|
|
|
[ -n "$circuitid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--dhcp-circuitid=$networkid,$circuitid"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-05-19 20:17:56 +00:00
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
dhcp_userclass_add() {
|
|
|
|
local cfg="$1"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
[ -n "$networkid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
config_get userclass "$cfg" userclass
|
|
|
|
[ -n "$userclass" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--dhcp-userclass=$networkid,$userclass"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-05-19 20:17:56 +00:00
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
dhcp_vendorclass_add() {
|
|
|
|
local cfg="$1"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
[ -n "$networkid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
config_get vendorclass "$cfg" vendorclass
|
|
|
|
[ -n "$vendorclass" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--dhcp-vendorclass=$networkid,$vendorclass"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-05-19 20:17:56 +00:00
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
2016-09-02 11:51:09 +00:00
|
|
|
dhcp_match_add() {
|
|
|
|
local cfg="$1"
|
|
|
|
|
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
[ -n "$networkid" ] || return 0
|
|
|
|
|
|
|
|
config_get match "$cfg" match
|
|
|
|
[ -n "$match" ] || return 0
|
|
|
|
|
|
|
|
xappend "--dhcp-match=$networkid,$match"
|
|
|
|
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
|
|
|
}
|
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
dhcp_host_add() {
|
|
|
|
local cfg="$1"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-05-19 20:17:56 +00:00
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
2012-05-19 20:17:56 +00:00
|
|
|
[ -n "$networkid" ] && dhcp_option_add "$cfg" "$networkid" "$force"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2016-04-17 12:52:54 +00:00
|
|
|
config_get_bool enable "$cfg" enable 1
|
|
|
|
[ "$enable" = "0" ] && return 0
|
|
|
|
|
2011-05-24 09:12:50 +00:00
|
|
|
config_get name "$cfg" name
|
2007-11-05 14:14:06 +00:00
|
|
|
config_get ip "$cfg" ip
|
dnsmasq: add support for set: and tag: pairs
On my network, I have a variety of machines and appliances, some of which need different configuration issues than the default options.
For example:
config host
option name 'client'
option mac '00:01:02:03:04:05'
option ip '192.168.1.20'
option tag 'acme'
config tag acme
option force '1'
list dhcp_option 'option:router,192.168.1.253'
list dhcp_option 'option:domain-name,acme.com'
list dhcp_option 'option:domain-search,acme.com,redfish-solutions.com'
which allows me to override the default router for my client's host, as well as its domain-name, and its domain-search.
this causes the following config lines:
dhcp-host=00:01:02:03:04:05,set:acme,192.168.1.20,client
dhcp-option-force=tag:acme,option:router,192.168.1.253
dhcp-option-force=tag:acme,option:domain-name,acme.com
dhcp-option-force=tag:acme,option:domain-search:acme.com,redfish-solutions.com
This could be useful elsewhere, for instance, if you have an IP CCTV that you don't want to have a default-route, etc.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 31815
2012-05-19 20:17:54 +00:00
|
|
|
[ -n "$ip" -o -n "$name" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2014-08-28 06:27:53 +00:00
|
|
|
config_get_bool dns "$cfg" dns 0
|
|
|
|
[ "$dns" = "1" -a -n "$ip" -a -n "$name" ] && {
|
|
|
|
echo "$ip $name${DOMAIN:+.$DOMAIN}" >> $HOSTFILE
|
|
|
|
}
|
|
|
|
|
2010-03-08 23:28:55 +00:00
|
|
|
config_get mac "$cfg" mac
|
2014-08-28 06:27:57 +00:00
|
|
|
if [ -n "$mac" ]; then
|
|
|
|
# --dhcp-host=00:20:e0:3b:13:af,192.168.0.199,lap
|
|
|
|
macs=""
|
|
|
|
for m in $mac; do append macs "$m" ","; done
|
|
|
|
else
|
|
|
|
# --dhcp-host=lap,192.168.0.199
|
2013-01-02 15:14:19 +00:00
|
|
|
[ -n "$name" ] || return 0
|
2014-08-28 06:27:57 +00:00
|
|
|
macs="$name"
|
2013-01-02 15:14:19 +00:00
|
|
|
name=""
|
2014-08-28 06:27:57 +00:00
|
|
|
fi
|
2010-03-08 23:28:55 +00:00
|
|
|
|
dnsmasq: add support for set: and tag: pairs
On my network, I have a variety of machines and appliances, some of which need different configuration issues than the default options.
For example:
config host
option name 'client'
option mac '00:01:02:03:04:05'
option ip '192.168.1.20'
option tag 'acme'
config tag acme
option force '1'
list dhcp_option 'option:router,192.168.1.253'
list dhcp_option 'option:domain-name,acme.com'
list dhcp_option 'option:domain-search,acme.com,redfish-solutions.com'
which allows me to override the default router for my client's host, as well as its domain-name, and its domain-search.
this causes the following config lines:
dhcp-host=00:01:02:03:04:05,set:acme,192.168.1.20,client
dhcp-option-force=tag:acme,option:router,192.168.1.253
dhcp-option-force=tag:acme,option:domain-name,acme.com
dhcp-option-force=tag:acme,option:domain-search:acme.com,redfish-solutions.com
This could be useful elsewhere, for instance, if you have an IP CCTV that you don't want to have a default-route, etc.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 31815
2012-05-19 20:17:54 +00:00
|
|
|
config_get tag "$cfg" tag
|
|
|
|
|
2015-08-31 17:11:41 +00:00
|
|
|
if [ "$DHCPv6CAPABLE" -eq 1 ]; then
|
2016-12-20 21:29:59 +00:00
|
|
|
config_get duid "$cfg" duid
|
2015-08-31 17:11:41 +00:00
|
|
|
config_get hostid "$cfg" hostid
|
|
|
|
if [ -n "$hostid" ]; then
|
|
|
|
hex_to_hostid hostid "$hostid"
|
|
|
|
fi
|
|
|
|
fi
|
|
|
|
|
2013-10-11 18:33:15 +00:00
|
|
|
config_get_bool broadcast "$cfg" broadcast 0
|
|
|
|
[ "$broadcast" = "0" ] && broadcast=
|
|
|
|
|
2016-02-26 09:13:03 +00:00
|
|
|
config_get leasetime "$cfg" leasetime
|
|
|
|
|
2016-12-20 21:29:59 +00:00
|
|
|
xappend "--dhcp-host=$macs${duid:+,id:$duid}${networkid:+,net:$networkid}${broadcast:+,set:needs-broadcast}${tag:+,set:$tag}${ip:+,$ip${hostid:+,[::$hostid]}}${name:+,$name}${leasetime:+,$leasetime}"
|
dnsmasq: add support for set: and tag: pairs
On my network, I have a variety of machines and appliances, some of which need different configuration issues than the default options.
For example:
config host
option name 'client'
option mac '00:01:02:03:04:05'
option ip '192.168.1.20'
option tag 'acme'
config tag acme
option force '1'
list dhcp_option 'option:router,192.168.1.253'
list dhcp_option 'option:domain-name,acme.com'
list dhcp_option 'option:domain-search,acme.com,redfish-solutions.com'
which allows me to override the default router for my client's host, as well as its domain-name, and its domain-search.
this causes the following config lines:
dhcp-host=00:01:02:03:04:05,set:acme,192.168.1.20,client
dhcp-option-force=tag:acme,option:router,192.168.1.253
dhcp-option-force=tag:acme,option:domain-name,acme.com
dhcp-option-force=tag:acme,option:domain-search:acme.com,redfish-solutions.com
This could be useful elsewhere, for instance, if you have an IP CCTV that you don't want to have a default-route, etc.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 31815
2012-05-19 20:17:54 +00:00
|
|
|
}
|
|
|
|
|
dnsmasq: expand 'add_local_hostname' fexibility including FQDN
ref commit 612e2276b4a2f57fcbbe79b95bec4a46e89d748c
ref commit ec63e3bf1312ab4c666f7417ca9844857214047f
'option add_local_hostname' scripted implementation statically assigns
this host in auto generated host file at init. If IFUP or other signals
do not occur, then address changes are not tracked. The script doesn't
apply all the addresses at an interface. This may make logs obscure.
The script only puts the bare host name (maybe not FQDN) in host file,
but if '--exapandhosts' is enabled, then /etc/hosts entries will be
suffixed, and "127.0.0.1 localhost" becomes "localhost.lan".
dnsmasq provides an option to perform this function, but it is rather
greedy. '--interface-name=<name>,<iface>' will assign the name to all
IP on the specified interface (except link local). This is a useful
feature, but some setups depend on the original restrictive behavior.
'option add_local_fqdn' is added to enhance the feature set, but
if not entered or empty string, then it will default to original
option and behavior. This new option has a few settings. At each
increased setting the most detailed name becomes the PTR record:
0 - same as add_local_hostname 0 or disabled
1 - same as add_local_hostname 1
2 - assigns the bare host name to all IP w/ --dnsmasq-interface
3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface
4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface
'option add_wan_fqdn' is added to run the same procedure on
inferred WAN intefaces. If an interface has 'config dhcp' and
'option ignore 1' set, then it is considered WAN. The original
option would only run on DHCP serving interfaces.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
2017-01-14 02:37:25 +00:00
|
|
|
dhcp_this_host_add() {
|
|
|
|
local net="$1"
|
|
|
|
local ifname="$2"
|
|
|
|
local mode="$3"
|
|
|
|
local routerstub routername ifdashname
|
|
|
|
local lanaddr lanaddr6 lanaddrs6 ulaprefix
|
|
|
|
|
|
|
|
if [ "$mode" -gt 0 ] ; then
|
|
|
|
ifdashname="${ifname//./-}"
|
|
|
|
routerstub="$( md5sum /etc/os-release )"
|
|
|
|
routerstub="router-${routerstub// */}"
|
|
|
|
routername="$( uci_get system @system[0] hostname $routerstub )"
|
|
|
|
|
|
|
|
if [ "$mode" -gt 1 ] ; then
|
|
|
|
if [ "$mode" -gt 2 ] ; then
|
|
|
|
if [ "$mode" -gt 3 ] ; then
|
|
|
|
xappend "--interface-name=$ifdashname.$routername.$DOMAIN,$ifname"
|
|
|
|
fi
|
|
|
|
|
|
|
|
xappend "--interface-name=$routername.$DOMAIN,$ifname"
|
|
|
|
fi
|
|
|
|
|
|
|
|
# All IP addresses discovered by dnsmasq will be labeled (except fe80::)
|
|
|
|
xappend "--interface-name=$routername,$ifname"
|
|
|
|
|
|
|
|
else
|
|
|
|
# This uses a static host file entry for only limited addresses.
|
|
|
|
# Use dnsmasq option "--expandhosts" to enable FQDN on host files.
|
|
|
|
ulaprefix="$(uci_get network @globals[0] ula_prefix)"
|
|
|
|
network_get_ipaddr lanaddr "$net"
|
|
|
|
network_get_ipaddrs6 lanaddrs6 "$net"
|
|
|
|
|
|
|
|
if [ -n "$lanaddr" ] ; then
|
|
|
|
dhcp_domain_add "" "$routername" "$lanaddr"
|
|
|
|
fi
|
|
|
|
|
|
|
|
if [ -n "$ulaprefix" -a -n "$lanaddrs6" ] ; then
|
|
|
|
for lanaddr6 in $lanaddrs6 ; do
|
|
|
|
case "$lanaddr6" in
|
|
|
|
"${ulaprefix%%:/*}"*)
|
|
|
|
dhcp_domain_add "" "$routername" "$lanaddr6"
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
done
|
|
|
|
fi
|
|
|
|
fi
|
|
|
|
fi
|
|
|
|
}
|
|
|
|
|
dnsmasq: add support for set: and tag: pairs
On my network, I have a variety of machines and appliances, some of which need different configuration issues than the default options.
For example:
config host
option name 'client'
option mac '00:01:02:03:04:05'
option ip '192.168.1.20'
option tag 'acme'
config tag acme
option force '1'
list dhcp_option 'option:router,192.168.1.253'
list dhcp_option 'option:domain-name,acme.com'
list dhcp_option 'option:domain-search,acme.com,redfish-solutions.com'
which allows me to override the default router for my client's host, as well as its domain-name, and its domain-search.
this causes the following config lines:
dhcp-host=00:01:02:03:04:05,set:acme,192.168.1.20,client
dhcp-option-force=tag:acme,option:router,192.168.1.253
dhcp-option-force=tag:acme,option:domain-name,acme.com
dhcp-option-force=tag:acme,option:domain-search:acme.com,redfish-solutions.com
This could be useful elsewhere, for instance, if you have an IP CCTV that you don't want to have a default-route, etc.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 31815
2012-05-19 20:17:54 +00:00
|
|
|
dhcp_tag_add() {
|
|
|
|
local cfg="$1"
|
|
|
|
|
|
|
|
tag="$cfg"
|
|
|
|
|
|
|
|
[ -n "$tag" ] || return 0
|
|
|
|
|
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
[ "$force" = "0" ] && force=
|
|
|
|
|
|
|
|
config_get option "$cfg" dhcp_option
|
|
|
|
for o in $option; do
|
|
|
|
xappend "--dhcp-option${force:+-force}=tag:$tag,$o"
|
|
|
|
done
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
dhcp_mac_add() {
|
2007-03-17 13:31:13 +00:00
|
|
|
local cfg="$1"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
[ -n "$networkid" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
config_get mac "$cfg" mac
|
|
|
|
[ -n "$mac" ] || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--dhcp-mac=$networkid,$mac"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
dhcp_option_add "$cfg" "$networkid"
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
2007-03-17 13:31:13 +00:00
|
|
|
|
2008-07-05 13:43:55 +00:00
|
|
|
dhcp_boot_add() {
|
|
|
|
local cfg="$1"
|
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
2008-07-05 13:43:55 +00:00
|
|
|
|
|
|
|
config_get filename "$cfg" filename
|
|
|
|
[ -n "$filename" ] || return 0
|
|
|
|
|
|
|
|
config_get servername "$cfg" servername
|
|
|
|
config_get serveraddress "$cfg" serveraddress
|
|
|
|
|
2015-03-13 08:38:35 +00:00
|
|
|
[ -n "$serveraddress" -a ! -n "$servername" ] && return 0
|
|
|
|
|
|
|
|
xappend "--dhcp-boot=${networkid:+net:$networkid,}${filename}${servername:+,$servername}${serveraddress:+,$serveraddress}"
|
2008-07-05 13:43:55 +00:00
|
|
|
|
2012-05-19 20:17:56 +00:00
|
|
|
config_get_bool force "$cfg" force 0
|
|
|
|
|
|
|
|
dhcp_option_add "$cfg" "$networkid" "$force"
|
2008-07-05 13:43:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
dhcp_add() {
|
|
|
|
local cfg="$1"
|
2007-03-17 13:31:13 +00:00
|
|
|
config_get net "$cfg" interface
|
|
|
|
[ -n "$net" ] || return 0
|
2007-08-29 18:40:52 +00:00
|
|
|
|
2014-08-19 05:58:44 +00:00
|
|
|
config_get dhcpv4 "$cfg" dhcpv4
|
|
|
|
[ "$dhcpv4" != "disabled" ] || return 0
|
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
config_get networkid "$cfg" networkid
|
|
|
|
[ -n "$networkid" ] || networkid="$net"
|
2007-08-29 18:40:52 +00:00
|
|
|
|
2013-12-16 16:47:41 +00:00
|
|
|
network_get_subnet subnet "$net" || return 0
|
|
|
|
network_get_device ifname "$net" || return 0
|
|
|
|
network_get_protocol proto "$net" || return 0
|
2007-08-29 18:40:52 +00:00
|
|
|
|
2013-12-16 16:47:41 +00:00
|
|
|
[ "$cachelocal" = "0" ] && network_get_dnsserver dnsserver "$net" && {
|
2007-09-10 20:24:18 +00:00
|
|
|
DNS_SERVERS="$DNS_SERVERS $dnsserver"
|
|
|
|
}
|
|
|
|
|
dnsmasq: expand 'add_local_hostname' fexibility including FQDN
ref commit 612e2276b4a2f57fcbbe79b95bec4a46e89d748c
ref commit ec63e3bf1312ab4c666f7417ca9844857214047f
'option add_local_hostname' scripted implementation statically assigns
this host in auto generated host file at init. If IFUP or other signals
do not occur, then address changes are not tracked. The script doesn't
apply all the addresses at an interface. This may make logs obscure.
The script only puts the bare host name (maybe not FQDN) in host file,
but if '--exapandhosts' is enabled, then /etc/hosts entries will be
suffixed, and "127.0.0.1 localhost" becomes "localhost.lan".
dnsmasq provides an option to perform this function, but it is rather
greedy. '--interface-name=<name>,<iface>' will assign the name to all
IP on the specified interface (except link local). This is a useful
feature, but some setups depend on the original restrictive behavior.
'option add_local_fqdn' is added to enhance the feature set, but
if not entered or empty string, then it will default to original
option and behavior. This new option has a few settings. At each
increased setting the most detailed name becomes the PTR record:
0 - same as add_local_hostname 0 or disabled
1 - same as add_local_hostname 1
2 - assigns the bare host name to all IP w/ --dnsmasq-interface
3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface
4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface
'option add_wan_fqdn' is added to run the same procedure on
inferred WAN intefaces. If an interface has 'config dhcp' and
'option ignore 1' set, then it is considered WAN. The original
option would only run on DHCP serving interfaces.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
2017-01-14 02:37:25 +00:00
|
|
|
append_bool "$cfg" ignore "--no-dhcp-interface=$ifname" && {
|
|
|
|
# Many ISP do not have useful names for DHCP customers (your WAN).
|
|
|
|
dhcp_this_host_add "$net" "$ifname" "$ADD_WAN_FQDN"
|
|
|
|
return 0
|
|
|
|
}
|
2007-08-29 18:40:52 +00:00
|
|
|
|
2013-12-16 16:47:41 +00:00
|
|
|
# Do not support non-static interfaces for now
|
2007-03-17 13:31:13 +00:00
|
|
|
[ static = "$proto" ] || return 0
|
2007-08-29 18:40:52 +00:00
|
|
|
|
2013-12-16 16:47:41 +00:00
|
|
|
# Override interface netmask with dhcp config if applicable
|
|
|
|
config_get netmask "$cfg" netmask "${subnet##*/}"
|
2007-03-17 13:31:13 +00:00
|
|
|
|
2007-08-29 18:40:52 +00:00
|
|
|
#check for an already active dhcp server on the interface, unless 'force' is set
|
2007-03-17 13:31:13 +00:00
|
|
|
config_get_bool force "$cfg" force 0
|
2013-12-21 13:31:28 +00:00
|
|
|
[ $force -gt 0 ] || dhcp_check "$ifname" || return 0
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2007-03-17 13:31:13 +00:00
|
|
|
config_get start "$cfg" start
|
2007-08-19 20:50:52 +00:00
|
|
|
config_get limit "$cfg" limit
|
2007-03-17 13:31:13 +00:00
|
|
|
config_get leasetime "$cfg" leasetime
|
2007-03-31 00:39:55 +00:00
|
|
|
config_get options "$cfg" options
|
2007-11-28 03:02:20 +00:00
|
|
|
config_get_bool dynamicdhcp "$cfg" dynamicdhcp 1
|
2007-03-17 13:31:13 +00:00
|
|
|
|
dnsmasq: expand 'add_local_hostname' fexibility including FQDN
ref commit 612e2276b4a2f57fcbbe79b95bec4a46e89d748c
ref commit ec63e3bf1312ab4c666f7417ca9844857214047f
'option add_local_hostname' scripted implementation statically assigns
this host in auto generated host file at init. If IFUP or other signals
do not occur, then address changes are not tracked. The script doesn't
apply all the addresses at an interface. This may make logs obscure.
The script only puts the bare host name (maybe not FQDN) in host file,
but if '--exapandhosts' is enabled, then /etc/hosts entries will be
suffixed, and "127.0.0.1 localhost" becomes "localhost.lan".
dnsmasq provides an option to perform this function, but it is rather
greedy. '--interface-name=<name>,<iface>' will assign the name to all
IP on the specified interface (except link local). This is a useful
feature, but some setups depend on the original restrictive behavior.
'option add_local_fqdn' is added to enhance the feature set, but
if not entered or empty string, then it will default to original
option and behavior. This new option has a few settings. At each
increased setting the most detailed name becomes the PTR record:
0 - same as add_local_hostname 0 or disabled
1 - same as add_local_hostname 1
2 - assigns the bare host name to all IP w/ --dnsmasq-interface
3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface
4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface
'option add_wan_fqdn' is added to run the same procedure on
inferred WAN intefaces. If an interface has 'config dhcp' and
'option ignore 1' set, then it is considered WAN. The original
option would only run on DHCP serving interfaces.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
2017-01-14 02:37:25 +00:00
|
|
|
# Put the router host name on this DHCP served interface address(es)
|
|
|
|
dhcp_this_host_add "$net" "$ifname" "$ADD_LOCAL_FQDN"
|
|
|
|
|
2007-03-17 13:31:13 +00:00
|
|
|
leasetime="${leasetime:-12h}"
|
|
|
|
start="$(dhcp_calc "${start:-100}")"
|
2010-03-18 15:50:05 +00:00
|
|
|
limit="${limit:-150}"
|
2011-01-26 11:33:33 +00:00
|
|
|
[ "$limit" -gt 0 ] && limit=$((limit-1))
|
2013-12-16 16:47:41 +00:00
|
|
|
eval "$(ipcalc.sh "${subnet%%/*}" $netmask $start $limit)"
|
2007-11-28 03:02:20 +00:00
|
|
|
if [ "$dynamicdhcp" = "0" ]; then END="static"; fi
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--dhcp-range=$networkid,$START,$END,$NETMASK,$leasetime${options:+ $options}"
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2010-01-08 00:03:08 +00:00
|
|
|
dhcp_option_add "$cfg" "$networkid"
|
2007-08-29 18:40:52 +00:00
|
|
|
}
|
|
|
|
|
2007-09-25 23:16:31 +00:00
|
|
|
dhcp_option_add() {
|
2007-08-29 18:40:52 +00:00
|
|
|
local cfg="$1"
|
2010-01-08 00:03:08 +00:00
|
|
|
local networkid="$2"
|
2012-05-19 20:17:56 +00:00
|
|
|
local force="$3"
|
|
|
|
|
|
|
|
[ "$force" = "0" ] && force=
|
2007-09-25 23:16:31 +00:00
|
|
|
|
2008-09-07 20:07:55 +00:00
|
|
|
config_get dhcp_option "$cfg" dhcp_option
|
|
|
|
for o in $dhcp_option; do
|
2012-07-01 11:32:29 +00:00
|
|
|
xappend "--dhcp-option${force:+-force}=${networkid:+$networkid,}$o"
|
2007-08-29 18:40:52 +00:00
|
|
|
done
|
|
|
|
|
2007-03-17 13:31:13 +00:00
|
|
|
}
|
|
|
|
|
2009-10-05 16:58:06 +00:00
|
|
|
dhcp_domain_add() {
|
|
|
|
local cfg="$1"
|
2013-06-17 11:55:30 +00:00
|
|
|
local ip name names record
|
2009-10-05 16:58:06 +00:00
|
|
|
|
2011-12-01 21:34:45 +00:00
|
|
|
config_get names "$cfg" name "$2"
|
2010-04-02 22:56:22 +00:00
|
|
|
[ -n "$names" ] || return 0
|
2009-10-05 16:58:06 +00:00
|
|
|
|
2011-12-01 21:34:45 +00:00
|
|
|
config_get ip "$cfg" ip "$3"
|
2009-10-05 16:58:06 +00:00
|
|
|
[ -n "$ip" ] || return 0
|
|
|
|
|
2010-04-02 22:56:22 +00:00
|
|
|
for name in $names; do
|
2014-08-28 06:27:49 +00:00
|
|
|
record="${record:+$record }$name"
|
2010-04-02 22:56:22 +00:00
|
|
|
done
|
2013-06-17 11:55:30 +00:00
|
|
|
|
2014-08-28 06:27:49 +00:00
|
|
|
echo "$ip $record" >> $HOSTFILE
|
2009-10-05 16:58:06 +00:00
|
|
|
}
|
|
|
|
|
2010-05-08 12:35:29 +00:00
|
|
|
dhcp_srv_add() {
|
|
|
|
local cfg="$1"
|
|
|
|
|
|
|
|
config_get srv "$cfg" srv
|
|
|
|
[ -n "$srv" ] || return 0
|
|
|
|
|
|
|
|
config_get target "$cfg" target
|
|
|
|
[ -n "$target" ] || return 0
|
|
|
|
|
|
|
|
config_get port "$cfg" port
|
2012-03-23 11:19:56 +00:00
|
|
|
[ -n "$port" ] || return 0
|
2010-05-08 12:35:29 +00:00
|
|
|
|
2012-03-23 11:19:56 +00:00
|
|
|
config_get class "$cfg" class
|
|
|
|
config_get weight "$cfg" weight
|
|
|
|
|
|
|
|
local service="$srv,$target,$port${class:+,$class${weight:+,$weight}}"
|
2010-05-08 12:35:29 +00:00
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--srv-host=$service"
|
2010-05-08 12:35:29 +00:00
|
|
|
}
|
|
|
|
|
2012-03-23 11:19:58 +00:00
|
|
|
dhcp_mx_add() {
|
|
|
|
local cfg="$1"
|
2012-03-23 11:26:47 +00:00
|
|
|
local domain relay pref
|
2012-03-23 11:19:58 +00:00
|
|
|
|
2012-03-23 11:26:47 +00:00
|
|
|
config_get domain "$cfg" domain
|
2012-03-23 11:19:58 +00:00
|
|
|
[ -n "$domain" ] || return 0
|
|
|
|
|
|
|
|
config_get relay "$cfg" relay
|
|
|
|
[ -n "$relay" ] || return 0
|
|
|
|
|
|
|
|
config_get pref "$cfg" pref 0
|
|
|
|
|
|
|
|
local service="$domain,$relay,$pref"
|
|
|
|
|
2012-05-19 20:17:19 +00:00
|
|
|
xappend "--mx-host=$service"
|
2012-03-23 11:19:58 +00:00
|
|
|
}
|
|
|
|
|
2011-10-20 12:12:26 +00:00
|
|
|
dhcp_cname_add() {
|
|
|
|
local cfg="$1"
|
|
|
|
local cname target
|
|
|
|
|
|
|
|
config_get cname "$cfg" cname
|
|
|
|
[ -n "$cname" ] || return 0
|
|
|
|
|
|
|
|
config_get target "$cfg" target
|
|
|
|
[ -n "$target" ] || return 0
|
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
xappend "--cname=${cname},${target}"
|
2011-10-20 12:12:26 +00:00
|
|
|
}
|
|
|
|
|
2013-06-17 11:55:30 +00:00
|
|
|
dhcp_hostrecord_add() {
|
|
|
|
local cfg="$1"
|
|
|
|
local names addresses record val
|
|
|
|
|
|
|
|
config_get names "$cfg" name "$2"
|
|
|
|
if [ -z "$names" ]; then
|
|
|
|
return 0
|
|
|
|
fi
|
|
|
|
|
|
|
|
config_get addresses "$cfg" ip "$3"
|
|
|
|
if [ -z "$addresses" ]; then
|
|
|
|
return 0
|
|
|
|
fi
|
|
|
|
|
|
|
|
for val in $names $addresses; do
|
|
|
|
record="${record:+$record,}$val"
|
|
|
|
done
|
|
|
|
|
|
|
|
xappend "--host-record=$record"
|
|
|
|
}
|
|
|
|
|
2016-02-26 08:35:48 +00:00
|
|
|
dhcp_relay_add() {
|
|
|
|
local cfg="$1"
|
|
|
|
local local_addr server_addr interface
|
|
|
|
|
|
|
|
config_get local_addr "$cfg" local_addr
|
|
|
|
[ -n "$local_addr" ] || return 0
|
|
|
|
|
|
|
|
config_get server_addr "$cfg" server_addr
|
|
|
|
[ -n "$server_addr" ] || return 0
|
|
|
|
|
|
|
|
config_get interface "$cfg" interface
|
|
|
|
if [ -z "$interface" ]; then
|
|
|
|
xappend "--dhcp-relay=$local_addr,$server_addr"
|
|
|
|
else
|
|
|
|
xappend "--dhcp-relay=$local_addr,$server_addr,$interface"
|
|
|
|
fi
|
|
|
|
}
|
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
dnsmasq_start()
|
2016-07-29 12:56:35 +00:00
|
|
|
{
|
2016-10-12 08:33:16 +00:00
|
|
|
local cfg="$1" disabled
|
2013-12-21 13:31:28 +00:00
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
config_get_bool disabled "$cfg" disabled 0
|
|
|
|
[ "$disabled" -gt 0 ] && return 0
|
2016-07-29 12:56:35 +00:00
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
# reset list of DOMAINS and DNS servers (for each dnsmasq instance)
|
|
|
|
DNS_SERVERS=""
|
|
|
|
DOMAIN=""
|
|
|
|
CONFIGFILE="${BASECONFIGFILE}.${cfg}"
|
|
|
|
CONFIGFILE_TMP="${CONFIGFILE}.$$"
|
|
|
|
HOSTFILE="${BASEHOSTFILE}.${cfg}"
|
|
|
|
TIMESTAMPFILE="${BASETIMESTAMPFILE}.${cfg}"
|
|
|
|
BASEDHCPSTAMPFILE_CFG="${BASEDHCPSTAMPFILE}.${cfg}"
|
2007-03-17 13:31:13 +00:00
|
|
|
|
2012-04-02 22:31:21 +00:00
|
|
|
# before we can call xappend
|
2015-03-26 10:58:30 +00:00
|
|
|
mkdir -p /var/run/dnsmasq/
|
2012-04-02 22:31:21 +00:00
|
|
|
mkdir -p $(dirname $CONFIGFILE)
|
2016-10-12 08:33:16 +00:00
|
|
|
mkdir -p $(dirname $HOSTFILE)
|
2015-03-26 10:58:30 +00:00
|
|
|
mkdir -p /var/lib/misc
|
2016-09-05 08:01:19 +00:00
|
|
|
chown dnsmasq:dnsmasq /var/run/dnsmasq
|
2015-03-26 10:58:30 +00:00
|
|
|
|
2016-06-14 10:00:21 +00:00
|
|
|
[ -f "$TIMESTAMPFILE" ] && rm -f "$TIMESTAMPFILE"
|
2012-04-02 22:31:21 +00:00
|
|
|
|
2016-06-13 13:21:47 +00:00
|
|
|
echo "# auto-generated config file from /etc/config/dhcp" > $CONFIGFILE_TMP
|
2014-05-20 05:00:28 +00:00
|
|
|
echo "# auto-generated config file from /etc/config/dhcp" > $HOSTFILE
|
2012-04-02 22:31:21 +00:00
|
|
|
|
|
|
|
# if we did this last, we could override auto-generated config
|
|
|
|
[ -f /etc/dnsmasq.conf ] && {
|
|
|
|
xappend "--conf-file=/etc/dnsmasq.conf"
|
|
|
|
}
|
|
|
|
|
2015-08-31 17:11:41 +00:00
|
|
|
$PROG --version | grep -osqE "^Compile time options:.* DHCPv6( |$)" && DHCPv6CAPABLE=1 || DHCPv6CAPABLE=0
|
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
append_bool "$cfg" authoritative "--dhcp-authoritative"
|
|
|
|
append_bool "$cfg" nodaemon "--no-daemon"
|
|
|
|
append_bool "$cfg" domainneeded "--domain-needed"
|
|
|
|
append_bool "$cfg" filterwin2k "--filterwin2k"
|
|
|
|
append_bool "$cfg" nohosts "--no-hosts"
|
|
|
|
append_bool "$cfg" nonegcache "--no-negcache"
|
|
|
|
append_bool "$cfg" strictorder "--strict-order"
|
|
|
|
append_bool "$cfg" logqueries "--log-queries=extra"
|
|
|
|
append_bool "$cfg" noresolv "--no-resolv"
|
|
|
|
append_bool "$cfg" localise_queries "--localise-queries"
|
|
|
|
append_bool "$cfg" readethers "--read-ethers"
|
|
|
|
append_bool "$cfg" dbus "--enable-dbus"
|
|
|
|
append_bool "$cfg" boguspriv "--bogus-priv"
|
|
|
|
append_bool "$cfg" expandhosts "--expand-hosts"
|
|
|
|
config_get tftp_root "$cfg" "tftp_root"
|
|
|
|
[ -d "$tftp_root" ] && append_bool "$cfg" enable_tftp "--enable-tftp"
|
|
|
|
append_bool "$cfg" tftp_no_fail "--tftp-no-fail"
|
|
|
|
append_bool "$cfg" nonwildcard "--bind-dynamic"
|
|
|
|
append_bool "$cfg" fqdn "--dhcp-fqdn"
|
|
|
|
append_bool "$cfg" proxydnssec "--proxy-dnssec"
|
|
|
|
append_bool "$cfg" localservice "--local-service"
|
2016-10-31 14:00:06 +00:00
|
|
|
append_bool "$cfg" logdhcp "--log-dhcp"
|
2016-10-12 08:33:16 +00:00
|
|
|
append_bool "$cfg" quietdhcp "--quiet-dhcp"
|
|
|
|
append_bool "$cfg" sequential_ip "--dhcp-sequential-ip"
|
|
|
|
append_bool "$cfg" allservers "--all-servers"
|
|
|
|
append_bool "$cfg" noping "--no-ping"
|
|
|
|
|
2016-12-21 19:53:39 +00:00
|
|
|
append_parm "$cfg" logfacility "--log-facility"
|
2016-10-12 08:33:16 +00:00
|
|
|
append_parm "$cfg" dhcpscript "--dhcp-script"
|
|
|
|
append_parm "$cfg" cachesize "--cache-size"
|
|
|
|
append_parm "$cfg" dnsforwardmax "--dns-forward-max"
|
|
|
|
append_parm "$cfg" port "--port"
|
|
|
|
append_parm "$cfg" ednspacket_max "--edns-packet-max"
|
|
|
|
append_parm "$cfg" dhcpleasemax "--dhcp-lease-max"
|
|
|
|
append_parm "$cfg" "queryport" "--query-port"
|
|
|
|
append_parm "$cfg" "minport" "--min-port"
|
|
|
|
append_parm "$cfg" "maxport" "--max-port"
|
|
|
|
append_parm "$cfg" "domain" "--domain"
|
|
|
|
append_parm "$cfg" "local" "--server"
|
|
|
|
config_list_foreach "$cfg" "server" append_server
|
|
|
|
config_list_foreach "$cfg" "address" append_address
|
|
|
|
config_list_foreach "$cfg" "ipset" append_ipset
|
|
|
|
config_list_foreach "$cfg" "interface" append_interface
|
|
|
|
config_list_foreach "$cfg" "notinterface" append_notinterface
|
|
|
|
config_list_foreach "$cfg" "addnhosts" append_addnhosts
|
|
|
|
config_list_foreach "$cfg" "bogusnxdomain" append_bogusnxdomain
|
|
|
|
append_parm "$cfg" "leasefile" "--dhcp-leasefile" "/tmp/dhcp.leases"
|
|
|
|
append_parm "$cfg" "resolvfile" "--resolv-file" "/tmp/resolv.conf.auto"
|
|
|
|
append_parm "$cfg" "serversfile" "--servers-file"
|
|
|
|
append_parm "$cfg" "tftp_root" "--tftp-root"
|
|
|
|
append_parm "$cfg" "dhcp_boot" "--dhcp-boot"
|
|
|
|
append_parm "$cfg" "local_ttl" "--local-ttl"
|
|
|
|
append_parm "$cfg" "pxe_prompt" "--pxe-prompt"
|
|
|
|
config_list_foreach "$cfg" "pxe_service" append_pxe_service
|
|
|
|
config_get DOMAIN "$cfg" domain
|
|
|
|
|
|
|
|
config_get_bool ADD_LOCAL_DOMAIN "$cfg" add_local_domain 1
|
|
|
|
config_get_bool ADD_LOCAL_HOSTNAME "$cfg" add_local_hostname 1
|
dnsmasq: expand 'add_local_hostname' fexibility including FQDN
ref commit 612e2276b4a2f57fcbbe79b95bec4a46e89d748c
ref commit ec63e3bf1312ab4c666f7417ca9844857214047f
'option add_local_hostname' scripted implementation statically assigns
this host in auto generated host file at init. If IFUP or other signals
do not occur, then address changes are not tracked. The script doesn't
apply all the addresses at an interface. This may make logs obscure.
The script only puts the bare host name (maybe not FQDN) in host file,
but if '--exapandhosts' is enabled, then /etc/hosts entries will be
suffixed, and "127.0.0.1 localhost" becomes "localhost.lan".
dnsmasq provides an option to perform this function, but it is rather
greedy. '--interface-name=<name>,<iface>' will assign the name to all
IP on the specified interface (except link local). This is a useful
feature, but some setups depend on the original restrictive behavior.
'option add_local_fqdn' is added to enhance the feature set, but
if not entered or empty string, then it will default to original
option and behavior. This new option has a few settings. At each
increased setting the most detailed name becomes the PTR record:
0 - same as add_local_hostname 0 or disabled
1 - same as add_local_hostname 1
2 - assigns the bare host name to all IP w/ --dnsmasq-interface
3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface
4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface
'option add_wan_fqdn' is added to run the same procedure on
inferred WAN intefaces. If an interface has 'config dhcp' and
'option ignore 1' set, then it is considered WAN. The original
option would only run on DHCP serving interfaces.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
2017-01-14 02:37:25 +00:00
|
|
|
config_get ADD_LOCAL_FQDN "$cfg" add_local_fqdn ""
|
|
|
|
config_get ADD_WAN_FQDN "$cfg" add_wan_fqdn 0
|
|
|
|
|
|
|
|
if [ -z "$ADD_LOCAL_FQDN" ] ; then
|
|
|
|
# maintain support for previous UCI
|
|
|
|
ADD_LOCAL_FQDN="$ADD_LOCAL_HOSTNAME"
|
|
|
|
fi
|
2016-10-12 08:33:16 +00:00
|
|
|
|
|
|
|
config_get_bool readethers "$cfg" readethers
|
|
|
|
[ "$readethers" = "1" -a \! -e "/etc/ethers" ] && touch /etc/ethers
|
|
|
|
|
|
|
|
config_get resolvfile $cfg resolvfile
|
|
|
|
config_get dhcpscript $cfg dhcpscript
|
|
|
|
|
|
|
|
config_get leasefile $cfg leasefile "/tmp/dhcp.leases"
|
|
|
|
[ -n "$leasefile" -a \! -e "$leasefile" ] && touch "$leasefile"
|
|
|
|
config_get_bool cachelocal "$cfg" cachelocal 1
|
|
|
|
|
|
|
|
config_get_bool noresolv "$cfg" noresolv 0
|
|
|
|
if [ "$noresolv" != "1" ]; then
|
|
|
|
config_get resolvfile "$cfg" resolvfile "/tmp/resolv.conf.auto"
|
|
|
|
# So jail doesn't complain if file missing
|
|
|
|
[ -n "$resolvfile" -a \! -e "$resolvfile" ] && touch "$resolvfile"
|
|
|
|
fi
|
|
|
|
|
|
|
|
config_get hostsfile "$cfg" dhcphostsfile
|
|
|
|
[ -e "$hostsfile" ] && xappend "--dhcp-hostsfile=$hostsfile"
|
|
|
|
|
|
|
|
local rebind
|
|
|
|
config_get_bool rebind "$cfg" rebind_protection 1
|
|
|
|
[ $rebind -gt 0 ] && {
|
|
|
|
log_once \
|
|
|
|
"DNS rebinding protection is active," \
|
|
|
|
"will discard upstream RFC1918 responses!"
|
|
|
|
xappend "--stop-dns-rebind"
|
|
|
|
|
|
|
|
local rebind_localhost
|
|
|
|
config_get_bool rebind_localhost "$cfg" rebind_localhost 0
|
|
|
|
[ $rebind_localhost -gt 0 ] && {
|
|
|
|
log_once "Allowing 127.0.0.0/8 responses"
|
|
|
|
xappend "--rebind-localhost-ok"
|
|
|
|
}
|
|
|
|
|
|
|
|
append_rebind_domain() {
|
|
|
|
log_once "Allowing RFC1918 responses for domain $1"
|
|
|
|
xappend "--rebind-domain-ok=$1"
|
|
|
|
}
|
|
|
|
|
|
|
|
config_list_foreach "$cfg" rebind_domain append_rebind_domain
|
|
|
|
}
|
|
|
|
|
|
|
|
config_get_bool dnssec "$cfg" dnssec 0
|
|
|
|
[ "$dnssec" -gt 0 ] && {
|
|
|
|
xappend "--conf-file=$TRUSTANCHORSFILE"
|
|
|
|
xappend "--dnssec"
|
|
|
|
[ -x /etc/init.d/sysntpd ] && {
|
|
|
|
/etc/init.d/sysntpd enabled
|
|
|
|
[ "$?" -ne 0 -o "$(uci_get system.ntp.enabled)" = "1" ] && {
|
|
|
|
[ -f "$TIMEVALIDFILE" ] || xappend "--dnssec-no-timecheck"
|
|
|
|
}
|
|
|
|
}
|
|
|
|
append_bool "$cfg" dnsseccheckunsigned "--dnssec-check-unsigned"
|
|
|
|
}
|
|
|
|
|
2016-11-03 20:44:29 +00:00
|
|
|
config_get addmac "$cfg" addmac 0
|
|
|
|
[ "$addmac" != "0" ] && {
|
|
|
|
[ "$addmac" = "1" ] && addmac=
|
|
|
|
xappend "--add-mac${addmac:+="$addmac"}"
|
|
|
|
}
|
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
dhcp_option_add "$cfg" "" 0
|
|
|
|
|
|
|
|
xappend "--dhcp-broadcast=tag:needs-broadcast"
|
|
|
|
|
2016-12-13 13:18:31 +00:00
|
|
|
xappend "--addn-hosts=$(dirname $HOSTFILE)"
|
2016-10-12 08:33:16 +00:00
|
|
|
|
|
|
|
config_get dnsmasqconfdir "$cfg" confdir "/tmp/dnsmasq.d"
|
|
|
|
[ ! -d "$dnsmasqconfdir" ] && mkdir -p $dnsmasqconfdir
|
|
|
|
xappend "--conf-dir=$dnsmasqconfdir"
|
|
|
|
xappend "--user=dnsmasq"
|
|
|
|
xappend "--group=dnsmasq"
|
|
|
|
echo >> $CONFIGFILE_TMP
|
|
|
|
|
|
|
|
config_get_bool enable_tftp "$cfg" enable_tftp 0
|
|
|
|
[ "$enable_tftp" -gt 0 ] && {
|
|
|
|
config_get tftp_root "$cfg" tftp_root
|
|
|
|
append EXTRA_MOUNT $tftp_root
|
|
|
|
}
|
|
|
|
|
|
|
|
config_foreach filter_dnsmasq host dhcp_host_add "$cfg"
|
2016-06-13 13:21:47 +00:00
|
|
|
echo >> $CONFIGFILE_TMP
|
2016-10-12 08:33:16 +00:00
|
|
|
config_foreach filter_dnsmasq boot dhcp_boot_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq mac dhcp_mac_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq tag dhcp_tag_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq vendorclass dhcp_vendorclass_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq userclass dhcp_userclass_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq circuitid dhcp_circuitid_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq remoteid dhcp_remoteid_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq subscrid dhcp_subscrid_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq match dhcp_match_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq domain dhcp_domain_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq hostrecord dhcp_hostrecord_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq relay dhcp_relay_add "$cfg"
|
2013-06-17 11:55:30 +00:00
|
|
|
|
2016-06-13 13:21:47 +00:00
|
|
|
echo >> $CONFIGFILE_TMP
|
2016-10-12 08:33:16 +00:00
|
|
|
config_foreach filter_dnsmasq srvhost dhcp_srv_add "$cfg"
|
|
|
|
config_foreach filter_dnsmasq mxhost dhcp_mx_add "$cfg"
|
2016-06-13 13:21:47 +00:00
|
|
|
echo >> $CONFIGFILE_TMP
|
2014-01-17 14:00:09 +00:00
|
|
|
|
|
|
|
config_get odhcpd_is_active odhcpd maindhcp
|
|
|
|
if [ "$odhcpd_is_active" != "1" ]; then
|
2016-10-12 08:33:16 +00:00
|
|
|
config_foreach filter_dnsmasq dhcp dhcp_add "$cfg"
|
2014-01-17 14:00:09 +00:00
|
|
|
fi
|
|
|
|
|
2016-06-13 13:21:47 +00:00
|
|
|
echo >> $CONFIGFILE_TMP
|
2016-10-12 08:33:16 +00:00
|
|
|
config_foreach filter_dnsmasq cname dhcp_cname_add "$cfg"
|
|
|
|
echo >> $CONFIGFILE_TMP
|
|
|
|
|
2016-06-13 13:21:47 +00:00
|
|
|
echo >> $CONFIGFILE_TMP
|
|
|
|
mv -f $CONFIGFILE_TMP $CONFIGFILE
|
2007-08-29 18:40:52 +00:00
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
[ "$resolvfile" = "/tmp/resolv.conf.auto" ] && {
|
|
|
|
rm -f /tmp/resolv.conf
|
|
|
|
[ $ADD_LOCAL_DOMAIN -eq 1 ] && [ -n "$DOMAIN" ] && {
|
|
|
|
echo "search $DOMAIN" >> /tmp/resolv.conf
|
|
|
|
}
|
|
|
|
DNS_SERVERS="$DNS_SERVERS 127.0.0.1"
|
|
|
|
for DNS_SERVER in $DNS_SERVERS ; do
|
|
|
|
echo "nameserver $DNS_SERVER" >> /tmp/resolv.conf
|
|
|
|
done
|
2007-01-08 21:33:53 +00:00
|
|
|
}
|
2016-02-25 09:24:31 +00:00
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
procd_open_instance $cfg
|
|
|
|
procd_set_param command $PROG -C $CONFIGFILE -k -x /var/run/dnsmasq/dnsmasq."${cfg}".pid
|
2016-02-25 09:24:31 +00:00
|
|
|
procd_set_param file $CONFIGFILE
|
|
|
|
procd_set_param respawn
|
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
local dnsmasqconffile="/etc/dnsmasq.${cfg}.conf"
|
|
|
|
if [ ! -r "$dnsmasqconffile" ]; then
|
|
|
|
dnsmasqconffile=/etc/dnsmasq.conf
|
|
|
|
fi
|
|
|
|
|
2016-02-25 09:24:31 +00:00
|
|
|
procd_add_jail dnsmasq ubus log
|
2016-10-12 08:33:16 +00:00
|
|
|
procd_add_jail_mount $CONFIGFILE $TRUSTANCHORSFILE $HOSTFILE /etc/passwd /etc/group /etc/TZ /dev/null /dev/urandom $dnsmasqconffile $dnsmasqconfdir $resolvfile $dhcpscript /etc/hosts /etc/ethers $EXTRA_MOUNT
|
|
|
|
procd_add_jail_mount_rw /var/run/dnsmasq/ $leasefile
|
2016-02-25 09:24:31 +00:00
|
|
|
|
|
|
|
procd_close_instance
|
2006-10-04 20:05:48 +00:00
|
|
|
}
|
|
|
|
|
2016-10-12 08:33:16 +00:00
|
|
|
dnsmasq_stop()
|
|
|
|
{
|
|
|
|
local cfg="$1"
|
|
|
|
|
|
|
|
config_get resolvfile "$cfg" "resolvfile"
|
|
|
|
|
|
|
|
#relink /tmp/resolve.conf only for main instance
|
|
|
|
[ "$resolvfile" = "/tmp/resolv.conf.auto" ] && {
|
|
|
|
[ -f /tmp/resolv.conf ] && {
|
|
|
|
rm -f /tmp/resolv.conf
|
|
|
|
ln -s "$resolvfile" /tmp/resolv.conf
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
rm -f ${BASEDHCPSTAMPFILE}.${cfg}.*.dhcp
|
|
|
|
}
|
|
|
|
|
|
|
|
service_triggers()
|
|
|
|
{
|
2016-12-16 09:34:52 +00:00
|
|
|
procd_add_reload_trigger "dhcp"
|
2016-10-12 08:33:16 +00:00
|
|
|
procd_add_raw_trigger "interface.*" 2000 /etc/init.d/dnsmasq reload
|
|
|
|
}
|
|
|
|
|
|
|
|
boot()
|
|
|
|
{
|
|
|
|
BOOT=1
|
|
|
|
start "$@"
|
|
|
|
}
|
|
|
|
|
|
|
|
start_service() {
|
|
|
|
local instance="$1"
|
|
|
|
local instance_found=0
|
|
|
|
|
|
|
|
[ -n "$BOOT" ] && return
|
|
|
|
|
|
|
|
. /lib/functions/network.sh
|
|
|
|
|
|
|
|
config_cb() {
|
|
|
|
local type="$1"
|
|
|
|
local name="$2"
|
|
|
|
if [ "$type" = "dnsmasq" ]; then
|
|
|
|
if [ -n "$instance" -a "$instance" = "$name" ]; then
|
|
|
|
instance_found=1
|
|
|
|
fi
|
|
|
|
fi
|
|
|
|
}
|
|
|
|
|
|
|
|
config_load dhcp
|
|
|
|
|
|
|
|
if [ -n "$instance" ]; then
|
|
|
|
[ "$instance_found" -gt 0 ] || return
|
|
|
|
dnsmasq_start "$instance"
|
|
|
|
else
|
|
|
|
config_foreach dnsmasq_start dnsmasq
|
|
|
|
fi
|
|
|
|
}
|
|
|
|
|
2013-12-21 13:31:28 +00:00
|
|
|
reload_service() {
|
|
|
|
rc_procd start_service "$@"
|
|
|
|
return 0
|
|
|
|
}
|
|
|
|
|
2013-09-17 21:45:30 +00:00
|
|
|
stop_service() {
|
2016-10-12 08:33:16 +00:00
|
|
|
local instance="$1"
|
|
|
|
local instance_found=0
|
|
|
|
|
|
|
|
config_cb() {
|
|
|
|
local type="$1"
|
|
|
|
local name="$2"
|
|
|
|
if [ "$type" = "dnsmasq" ]; then
|
|
|
|
if [ -n "$instance" -a "$instance" = "$name" ]; then
|
|
|
|
instance_found=1
|
|
|
|
fi
|
|
|
|
fi
|
2008-09-07 15:22:25 +00:00
|
|
|
}
|
2016-10-12 08:33:16 +00:00
|
|
|
|
|
|
|
config_load dhcp
|
|
|
|
|
|
|
|
if [ -n "$instance" ]; then
|
|
|
|
[ "$instance_found" -gt 0 ] || return
|
|
|
|
dnsmasq_stop "$instance"
|
|
|
|
else
|
|
|
|
config_foreach dnsmasq_stop dnsmasq
|
|
|
|
fi
|
2006-10-04 20:05:48 +00:00
|
|
|
}
|