mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-10 12:50:47 +00:00
1b4e3eda1b
ref commit 612e2276b4a2f57fcbbe79b95bec4a46e89d748c ref commit ec63e3bf1312ab4c666f7417ca9844857214047f 'option add_local_hostname' scripted implementation statically assigns this host in auto generated host file at init. If IFUP or other signals do not occur, then address changes are not tracked. The script doesn't apply all the addresses at an interface. This may make logs obscure. The script only puts the bare host name (maybe not FQDN) in host file, but if '--exapandhosts' is enabled, then /etc/hosts entries will be suffixed, and "127.0.0.1 localhost" becomes "localhost.lan". dnsmasq provides an option to perform this function, but it is rather greedy. '--interface-name=<name>,<iface>' will assign the name to all IP on the specified interface (except link local). This is a useful feature, but some setups depend on the original restrictive behavior. 'option add_local_fqdn' is added to enhance the feature set, but if not entered or empty string, then it will default to original option and behavior. This new option has a few settings. At each increased setting the most detailed name becomes the PTR record: 0 - same as add_local_hostname 0 or disabled 1 - same as add_local_hostname 1 2 - assigns the bare host name to all IP w/ --dnsmasq-interface 3 - assigns the FQDN and host to all IP w/ --dnsmasq-interface 4 - assigns <iface>.<host>.<domain> and above w/ --dnsmasq-nterface 'option add_wan_fqdn' is added to run the same procedure on inferred WAN intefaces. If an interface has 'config dhcp' and 'option ignore 1' set, then it is considered WAN. The original option would only run on DHCP serving interfaces. Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org