openwrt/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch

From a9f1c1d3e410596d0a39fd92562cc48ef960b1b7 Mon Sep 17 00:00:00 2001
From: Li Yang <leoyang.li@nxp.com>
Date: Fri, 5 Oct 2018 18:33:49 -0500
Subject: [PATCH] ARM: dts: accumulated change

Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 15 +++++++++++++++
 arch/arm/boot/dts/ls1021a-twr.dts | 15 +++++++++++++++
 arch/arm/boot/dts/ls1021a.dtsi    | 29 ++++++++++++++++++++++++-----
 3 files changed, 54 insertions(+), 5 deletions(-)

--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -126,6 +126,21 @@
 	};
 };
 
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &enet0 {
 	tbi-handle = <&tbi0>;
 	phy-handle = <&sgmii_phy1c>;
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -144,6 +144,21 @@
 	};
 };
 
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: n25q128a13@0 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &enet0 {
 	tbi-handle = <&tbi0>;
 	phy-handle = <&sgmii_phy2>;
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -167,12 +167,13 @@
 		ifc: ifc@1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
+			big-endian;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1021a-dcfg", "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
@@ -371,7 +372,7 @@
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
@@ -380,11 +381,12 @@
 			clocks = <&clockgen 4 1>;
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 39>, <&edma0 1 38>;
+			fsl-scl-gpio = <&gpio3 23 0>;
 			status = "disabled";
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
@@ -393,6 +395,7 @@
 			clocks = <&clockgen 4 1>;
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 37>, <&edma0 1 36>;
+			fsl-scl-gpio = <&gpio3 23 0>;
 			status = "disabled";
 		};
 
@@ -579,6 +582,16 @@
 			status = "disabled";
 		};
 
+		ftm0: ftm0@29d0000 {
+			compatible = "fsl,ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>,
+			      <0x0 0x1ee2140 0x0 0x4>;
+			reg-names = "ftm", "FlexTimer1";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+			status = "okay";
+		};
+
 		pwm1: pwm@29e0000 {
 			compatible = "fsl,vf610-ftm-pwm";
 			#pwm-cells = <3>;
@@ -861,6 +874,8 @@
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
+			usb3-lpm-capable;
+			snps,dis-u1u2-when-u3-quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 		};
 
@@ -869,7 +884,9 @@
 			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
 			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "pme", "aer";
 			fsl,pcie-scfg = <&scfg 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -893,7 +910,9 @@
 			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
 			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+					   <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "pme", "aer";
 			fsl,pcie-scfg = <&scfg 1>;
 			#address-cells = <3>;
 			#size-cells = <2>;