openwrt/target/linux/layerscape/patches-4.9/803-cpufreq-support-layerscape.patch

From d78d78ccbaded757e8bea0d13c4120518bdd4660 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Thu, 5 Jul 2018 17:21:38 +0800
Subject: [PATCH 15/32] cpufreq: support layerscape

This is an integrated patch for layerscape pm support.

Signed-off-by: Tang Yuantian <Yuantian.Tang@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
 .../devicetree/bindings/powerpc/fsl/pmc.txt   |  59 ++--
 drivers/cpufreq/Kconfig                       |   2 +-
 drivers/cpufreq/qoriq-cpufreq.c               | 176 +++++------
 drivers/firmware/psci.c                       |  12 +-
 drivers/soc/fsl/rcpm.c                        | 158 ++++++++++
 drivers/soc/fsl/sleep_fsm.c                   | 279 ++++++++++++++++++
 drivers/soc/fsl/sleep_fsm.h                   | 130 ++++++++
 7 files changed, 678 insertions(+), 138 deletions(-)
 create mode 100644 drivers/soc/fsl/rcpm.c
 create mode 100644 drivers/soc/fsl/sleep_fsm.c
 create mode 100644 drivers/soc/fsl/sleep_fsm.h

--- a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt
@@ -9,15 +9,20 @@ Properties:
 
   "fsl,mpc8548-pmc" should be listed for any chip whose PMC is
   compatible.  "fsl,mpc8536-pmc" should also be listed for any chip
-  whose PMC is compatible, and implies deep-sleep capability.
+  whose PMC is compatible, and implies deep-sleep capability and
+  wake on user defined packet(wakeup on ARP).
+
+  "fsl,p1022-pmc" should be listed for any chip whose PMC is
+  compatible, and implies lossless Ethernet capability during sleep.
 
   "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
   compatible; all statements below that apply to "fsl,mpc8548-pmc" also
   apply to "fsl,mpc8641d-pmc".
 
   Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
-  bit assignments are indicated via the sleep specifier in each device's
-  sleep property.
+  bit assignments are indicated via the clock nodes.  Device which has a
+  controllable clock source should have a "fsl,pmc-handle" property pointing
+  to the clock node.
 
 - reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
   is the PMC block, and the second resource is the Clock Configuration
@@ -33,31 +38,35 @@ Properties:
   this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
   a wakeup source from deep sleep.
 
-Sleep specifiers:
-
-  fsl,mpc8349-pmc: Sleep specifiers consist of one cell.  For each bit
-  that is set in the cell, the corresponding bit in SCCR will be saved
-  and cleared on suspend, and restored on resume.  This sleep controller
-  supports disabling and resuming devices at any time.
-
-  fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
-  which will be ORed into PMCDR upon suspend, and cleared from PMCDR
-  upon resume.  The first two cells are as described for fsl,mpc8578-pmc.
-  This sleep controller only supports disabling devices during system
-  sleep, or permanently.
-
-  fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
-  first of which will be ORed into DEVDISR (and the second into
-  DEVDISR2, if present -- this cell should be zero or absent if the
-  hardware does not have DEVDISR2) upon a request for permanent device
-  disabling.  This sleep controller does not support configuring devices
-  to disable during system sleep (unless supported by another compatible
-  match), or dynamically.
+Clock nodes:
+The clock nodes are to describe the masks in PM controller registers for each
+soc clock.
+- fsl,pmcdr-mask: For "fsl,mpc8548-pmc"-compatible devices, the mask will be
+  ORed into PMCDR before suspend if the device using this clock is the wake-up
+  source and need to be running during low power mode; clear the mask if
+  otherwise.
+
+- fsl,sccr-mask: For "fsl,mpc8349-pmc"-compatible devices, the corresponding
+  bit specified by the mask in SCCR will be saved and cleared on suspend, and
+  restored on resume.
+
+- fsl,devdisr-mask: Contain one or two cells, depending on the availability of
+  DEVDISR2 register.  For compatible devices, the mask will be ORed into DEVDISR
+  or DEVDISR2 when the clock should be permenently disabled.
 
 Example:
 
-	power@b00 {
-		compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
-		reg = <0xb00 0x100 0xa00 0x100>;
-		interrupts = <80 8>;
+	power@e0070 {
+		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+		reg = <0xe0070 0x20>;
+
+		etsec1_clk: soc-clk@24 {
+			fsl,pmcdr-mask = <0x00000080>;
+		};
+		etsec2_clk: soc-clk@25 {
+			fsl,pmcdr-mask = <0x00000040>;
+		};
+		etsec3_clk: soc-clk@26 {
+			fsl,pmcdr-mask = <0x00000020>;
+		};
 	};
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -334,7 +334,7 @@ endif
 
 config QORIQ_CPUFREQ
 	tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
-	depends on OF && COMMON_CLK && (PPC_E500MC || ARM)
+	depends on OF && COMMON_CLK && (PPC_E500MC || ARM || ARM64)
 	depends on !CPU_THERMAL || THERMAL
 	select CLK_QORIQ
 	help
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -11,6 +11,7 @@
 #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
 
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/cpufreq.h>
 #include <linux/cpu_cooling.h>
 #include <linux/errno.h>
@@ -22,10 +23,6 @@
 #include <linux/slab.h>
 #include <linux/smp.h>
 
-#if !defined(CONFIG_ARM)
-#include <asm/smp.h>	/* for get_hard_smp_processor_id() in UP configs */
-#endif
-
 /**
  * struct cpu_data
  * @pclk: the parent clock of cpu
@@ -37,73 +34,51 @@ struct cpu_data {
 	struct thermal_cooling_device *cdev;
 };
 
+/*
+ * Don't use cpufreq on this SoC -- used when the SoC would have otherwise
+ * matched a more generic compatible.
+ */
+#define SOC_BLACKLIST		1
+
 /**
  * struct soc_data - SoC specific data
- * @freq_mask: mask the disallowed frequencies
- * @flag: unique flags
+ * @flags: SOC_xxx
  */
 struct soc_data {
-	u32 freq_mask[4];
-	u32 flag;
-};
-
-#define FREQ_MASK	1
-/* see hardware specification for the allowed frqeuencies */
-static const struct soc_data sdata[] = {
-	{ /* used by p2041 and p3041 */
-		.freq_mask = {0x8, 0x8, 0x2, 0x2},
-		.flag = FREQ_MASK,
-	},
-	{ /* used by p5020 */
-		.freq_mask = {0x8, 0x2},
-		.flag = FREQ_MASK,
-	},
-	{ /* used by p4080, p5040 */
-		.freq_mask = {0},
-		.flag = 0,
-	},
+	u32 flags;
 };
 
-/*
- * the minimum allowed core frequency, in Hz
- * for chassis v1.0, >= platform frequency
- * for chassis v2.0, >= platform frequency / 2
- */
-static u32 min_cpufreq;
-static const u32 *fmask;
-
-#if defined(CONFIG_ARM)
-static int get_cpu_physical_id(int cpu)
-{
-	return topology_core_id(cpu);
-}
-#else
-static int get_cpu_physical_id(int cpu)
-{
-	return get_hard_smp_processor_id(cpu);
-}
-#endif
-
 static u32 get_bus_freq(void)
 {
 	struct device_node *soc;
 	u32 sysfreq;
+	struct clk *pltclk;
+	int ret;
 
+	/* get platform freq by searching bus-frequency property */
 	soc = of_find_node_by_type(NULL, "soc");
-	if (!soc)
-		return 0;
-
-	if (of_property_read_u32(soc, "bus-frequency", &sysfreq))
-		sysfreq = 0;
+	if (soc) {
+		ret = of_property_read_u32(soc, "bus-frequency", &sysfreq);
+		of_node_put(soc);
+		if (!ret)
+			return sysfreq;
+	}
 
-	of_node_put(soc);
+	/* get platform freq by its clock name */
+	pltclk = clk_get(NULL, "cg-pll0-div1");
+	if (IS_ERR(pltclk)) {
+		pr_err("%s: can't get bus frequency %ld\n",
+		       __func__, PTR_ERR(pltclk));
+		return PTR_ERR(pltclk);
+	}
 
-	return sysfreq;
+	return clk_get_rate(pltclk);
 }
 
-static struct device_node *cpu_to_clk_node(int cpu)
+static struct clk *cpu_to_clk(int cpu)
 {
-	struct device_node *np, *clk_np;
+	struct device_node *np;
+	struct clk *clk;
 
 	if (!cpu_present(cpu))
 		return NULL;
@@ -112,37 +87,28 @@ static struct device_node *cpu_to_clk_no
 	if (!np)
 		return NULL;
 
-	clk_np = of_parse_phandle(np, "clocks", 0);
-	if (!clk_np)
-		return NULL;
-
+	clk = of_clk_get(np, 0);
 	of_node_put(np);
-
-	return clk_np;
+	return clk;
 }
 
 /* traverse cpu nodes to get cpu mask of sharing clock wire */
 static void set_affected_cpus(struct cpufreq_policy *policy)
 {
-	struct device_node *np, *clk_np;
 	struct cpumask *dstp = policy->cpus;
+	struct clk *clk;
 	int i;
 
-	np = cpu_to_clk_node(policy->cpu);
-	if (!np)
-		return;
-
 	for_each_present_cpu(i) {
-		clk_np = cpu_to_clk_node(i);
-		if (!clk_np)
+		clk = cpu_to_clk(i);
+		if (IS_ERR(clk)) {
+			pr_err("%s: no clock for cpu %d\n", __func__, i);
 			continue;
+		}
 
-		if (clk_np == np)
+		if (clk_is_match(policy->clk, clk))
 			cpumask_set_cpu(i, dstp);
-
-		of_node_put(clk_np);
 	}
-	of_node_put(np);
 }
 
 /* reduce the duplicated frequencies in frequency table */
@@ -198,10 +164,11 @@ static void freq_table_sort(struct cpufr
 
 static int qoriq_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
-	struct device_node *np, *pnode;
+	struct device_node *np;
 	int i, count, ret;
-	u32 freq, mask;
+	u32 freq;
 	struct clk *clk;
+	const struct clk_hw *hwclk;
 	struct cpufreq_frequency_table *table;
 	struct cpu_data *data;
 	unsigned int cpu = policy->cpu;
@@ -221,17 +188,13 @@ static int qoriq_cpufreq_cpu_init(struct
 		goto err_nomem2;
 	}
 
-	pnode = of_parse_phandle(np, "clocks", 0);
-	if (!pnode) {
-		pr_err("%s: could not get clock information\n", __func__);
-		goto err_nomem2;
-	}
+	hwclk = __clk_get_hw(policy->clk);
+	count = clk_hw_get_num_parents(hwclk);
 
-	count = of_property_count_strings(pnode, "clock-names");
 	data->pclk = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
 	if (!data->pclk) {
 		pr_err("%s: no memory\n", __func__);
-		goto err_node;
+		goto err_nomem2;
 	}
 
 	table = kcalloc(count + 1, sizeof(*table), GFP_KERNEL);
@@ -240,23 +203,11 @@ static int qoriq_cpufreq_cpu_init(struct
 		goto err_pclk;
 	}
 
-	if (fmask)
-		mask = fmask[get_cpu_physical_id(cpu)];
-	else
-		mask = 0x0;
-
 	for (i = 0; i < count; i++) {
-		clk = of_clk_get(pnode, i);
+		clk = clk_hw_get_parent_by_index(hwclk, i)->clk;
 		data->pclk[i] = clk;
 		freq = clk_get_rate(clk);
-		/*
-		 * the clock is valid if its frequency is not masked
-		 * and large than minimum allowed frequency.
-		 */
-		if (freq < min_cpufreq || (mask & (1 << i)))
-			table[i].frequency = CPUFREQ_ENTRY_INVALID;
-		else
-			table[i].frequency = freq / 1000;
+		table[i].frequency = freq / 1000;
 		table[i].driver_data = i;
 	}
 	freq_table_redup(table, count);
@@ -282,7 +233,6 @@ static int qoriq_cpufreq_cpu_init(struct
 	policy->cpuinfo.transition_latency = u64temp + 1;
 
 	of_node_put(np);
-	of_node_put(pnode);
 
 	return 0;
 
@@ -290,10 +240,7 @@ err_nomem1:
 	kfree(table);
 err_pclk:
 	kfree(data->pclk);
-err_node:
-	of_node_put(pnode);
 err_nomem2:
-	policy->driver_data = NULL;
 	kfree(data);
 err_np:
 	of_node_put(np);
@@ -357,12 +304,25 @@ static struct cpufreq_driver qoriq_cpufr
 	.attr		= cpufreq_generic_attr,
 };
 
+static const struct soc_data blacklist = {
+	.flags = SOC_BLACKLIST,
+};
+
 static const struct of_device_id node_matches[] __initconst = {
-	{ .compatible = "fsl,p2041-clockgen", .data = &sdata[0], },
-	{ .compatible = "fsl,p3041-clockgen", .data = &sdata[0], },
-	{ .compatible = "fsl,p5020-clockgen", .data = &sdata[1], },
-	{ .compatible = "fsl,p4080-clockgen", .data = &sdata[2], },
-	{ .compatible = "fsl,p5040-clockgen", .data = &sdata[2], },
+	/* e6500 cannot use cpufreq due to erratum A-008083 */
+	{ .compatible = "fsl,b4420-clockgen", &blacklist },
+	{ .compatible = "fsl,b4860-clockgen", &blacklist },
+	{ .compatible = "fsl,t2080-clockgen", &blacklist },
+	{ .compatible = "fsl,t4240-clockgen", &blacklist },
+
+	{ .compatible = "fsl,ls1012a-clockgen", },
+	{ .compatible = "fsl,ls1021a-clockgen", },
+	{ .compatible = "fsl,ls1043a-clockgen", },
+	{ .compatible = "fsl,ls1046a-clockgen", },
+	{ .compatible = "fsl,ls1088a-clockgen", },
+	{ .compatible = "fsl,ls2080a-clockgen", },
+	{ .compatible = "fsl,p4080-clockgen", },
+	{ .compatible = "fsl,qoriq-clockgen-1.0", },
 	{ .compatible = "fsl,qoriq-clockgen-2.0", },
 	{}
 };
@@ -380,16 +340,12 @@ static int __init qoriq_cpufreq_init(voi
 
 	match = of_match_node(node_matches, np);
 	data = match->data;
-	if (data) {
-		if (data->flag)
-			fmask = data->freq_mask;
-		min_cpufreq = get_bus_freq();
-	} else {
-		min_cpufreq = get_bus_freq() / 2;
-	}
 
 	of_node_put(np);
 
+	if (data && data->flags & SOC_BLACKLIST)
+		return -ENODEV;
+
 	ret = cpufreq_register_driver(&qoriq_cpufreq_driver);
 	if (!ret)
 		pr_info("Freescale QorIQ CPU frequency scaling driver\n");
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -437,8 +437,12 @@ CPUIDLE_METHOD_OF_DECLARE(psci, "psci",
 
 static int psci_system_suspend(unsigned long unused)
 {
-	return invoke_psci_fn(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND),
-			      virt_to_phys(cpu_resume), 0, 0);
+	u32 state;
+
+	state = ( 2 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) |
+		(1 << PSCI_0_2_POWER_STATE_TYPE_SHIFT);
+
+	return psci_cpu_suspend(state, virt_to_phys(cpu_resume));
 }
 
 static int psci_system_suspend_enter(suspend_state_t state)
@@ -458,6 +462,8 @@ static void __init psci_init_system_susp
 	if (!IS_ENABLED(CONFIG_SUSPEND))
 		return;
 
+	suspend_set_ops(&psci_suspend_ops);
+
 	ret = psci_features(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND));
 
 	if (ret != PSCI_RET_NOT_SUPPORTED)
@@ -562,6 +568,8 @@ static void __init psci_0_2_set_function
 	arm_pm_restart = psci_sys_reset;
 
 	pm_power_off = psci_sys_poweroff;
+	psci_init_system_suspend();
+	suspend_set_ops(&psci_suspend_ops);
 }
 
 /*
--- /dev/null
+++ b/drivers/soc/fsl/rcpm.c
@@ -0,0 +1,158 @@
+/*
+ * Run Control and Power Management (RCPM) driver
+ *
+ * Copyright 2016 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#define pr_fmt(fmt) "RCPM: %s: " fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/suspend.h>
+
+/* RCPM register offset */
+#define RCPM_IPPDEXPCR0			0x140
+
+#define RCPM_WAKEUP_CELL_SIZE	2
+
+struct rcpm_config {
+	int ipp_num;
+	int ippdexpcr_offset;
+	u32 ippdexpcr[2];
+	void *rcpm_reg_base;
+};
+
+static struct rcpm_config *rcpm;
+
+static inline void rcpm_reg_write(u32 offset, u32 value)
+{
+	iowrite32be(value, rcpm->rcpm_reg_base + offset);
+}
+
+static inline u32 rcpm_reg_read(u32 offset)
+{
+	return ioread32be(rcpm->rcpm_reg_base + offset);
+}
+
+static void rcpm_wakeup_fixup(struct device *dev, void *data)
+{
+	struct device_node *node = dev ? dev->of_node : NULL;
+	u32 value[RCPM_WAKEUP_CELL_SIZE];
+	int ret, i;
+
+	if (!dev || !node || !device_may_wakeup(dev))
+		return;
+
+	/*
+	 * Get the values in the "rcpm-wakeup" property.
+	 * Three values are:
+	 * The first is a pointer to the RCPM node.
+	 * The second is the value of the ippdexpcr0 register.
+	 * The third is the value of the ippdexpcr1 register.
+	 */
+	ret = of_property_read_u32_array(node, "fsl,rcpm-wakeup",
+					 value, RCPM_WAKEUP_CELL_SIZE);
+	if (ret)
+		return;
+
+	pr_debug("wakeup source: the device %s\n", node->full_name);
+
+	for (i = 0; i < rcpm->ipp_num; i++)
+		rcpm->ippdexpcr[i] |= value[i + 1];
+}
+
+static int rcpm_suspend_prepare(void)
+{
+	int i;
+	u32 val;
+
+	BUG_ON(!rcpm);
+
+	for (i = 0; i < rcpm->ipp_num; i++)
+		rcpm->ippdexpcr[i] = 0;
+
+	dpm_for_each_dev(NULL, rcpm_wakeup_fixup);
+
+	for (i = 0; i < rcpm->ipp_num; i++) {
+		if (rcpm->ippdexpcr[i]) {
+			val = rcpm_reg_read(rcpm->ippdexpcr_offset + 4 * i);
+			rcpm_reg_write(rcpm->ippdexpcr_offset + 4 * i,
+					       val | rcpm->ippdexpcr[i]);
+			pr_debug("ippdexpcr%d = 0x%x\n", i, rcpm->ippdexpcr[i]);
+		}
+	}
+
+	return 0;
+}
+
+static int rcpm_suspend_notifier_call(struct notifier_block *bl,
+				      unsigned long state,
+				      void *unused)
+{
+	switch (state) {
+	case PM_SUSPEND_PREPARE:
+		rcpm_suspend_prepare();
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct rcpm_config rcpm_default_config = {
+	.ipp_num = 1,
+	.ippdexpcr_offset = RCPM_IPPDEXPCR0,
+};
+
+static const struct of_device_id rcpm_matches[] = {
+	{
+		.compatible = "fsl,qoriq-rcpm-2.1",
+		.data = &rcpm_default_config,
+	},
+	{}
+};
+
+static struct notifier_block rcpm_suspend_notifier = {
+	.notifier_call = rcpm_suspend_notifier_call,
+};
+
+static int __init layerscape_rcpm_init(void)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+
+	np = of_find_matching_node_and_match(NULL, rcpm_matches, &match);
+	if (!np) {
+		pr_err("Can't find the RCPM node.\n");
+		return -EINVAL;
+	}
+
+	if (match->data)
+		rcpm = (struct rcpm_config *)match->data;
+	else
+		return -EINVAL;
+
+	rcpm->rcpm_reg_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!rcpm->rcpm_reg_base)
+		return -ENOMEM;
+
+	register_pm_notifier(&rcpm_suspend_notifier);
+
+	pr_info("The RCPM driver initialized.\n");
+
+	return 0;
+}
+
+subsys_initcall(layerscape_rcpm_init);
--- /dev/null
+++ b/drivers/soc/fsl/sleep_fsm.c
@@ -0,0 +1,279 @@
+/*
+ * deep sleep FSM (finite-state machine) configuration
+ *
+ * Copyright 2018 NXP
+ *
+ * Author: Hongbo Zhang <hongbo.zhang@freescale.com>
+ *         Chenhui Zhao <chenhui.zhao@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the above-listed copyright holders nor the
+ *	 names of any contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/types.h>
+
+#include "sleep_fsm.h"
+/*
+ * These values are from chip's reference manual. For example,
+ * the values for T1040 can be found in "8.4.3.8 Programming
+ * supporting deep sleep mode" of Chapter 8 "Run Control and
+ * Power Management (RCPM)".
+ * The default value can be applied to T104x, LS1021.
+ */
+struct fsm_reg_vals epu_default_val[] = {
+	/* EPGCR (Event Processor Global Control Register) */
+	{EPGCR, 0},
+	/* EPECR (Event Processor Event Control Registers) */
+	{EPECR0 + EPECR_STRIDE * 0, 0},
+	{EPECR0 + EPECR_STRIDE * 1, 0},
+	{EPECR0 + EPECR_STRIDE * 2, 0xF0004004},
+	{EPECR0 + EPECR_STRIDE * 3, 0x80000084},
+	{EPECR0 + EPECR_STRIDE * 4, 0x20000084},
+	{EPECR0 + EPECR_STRIDE * 5, 0x08000004},
+	{EPECR0 + EPECR_STRIDE * 6, 0x80000084},
+	{EPECR0 + EPECR_STRIDE * 7, 0x80000084},
+	{EPECR0 + EPECR_STRIDE * 8, 0x60000084},
+	{EPECR0 + EPECR_STRIDE * 9, 0x08000084},
+	{EPECR0 + EPECR_STRIDE * 10, 0x42000084},
+	{EPECR0 + EPECR_STRIDE * 11, 0x90000084},
+	{EPECR0 + EPECR_STRIDE * 12, 0x80000084},
+	{EPECR0 + EPECR_STRIDE * 13, 0x08000084},
+	{EPECR0 + EPECR_STRIDE * 14, 0x02000084},
+	{EPECR0 + EPECR_STRIDE * 15, 0x00000004},
+	/*
+	 * EPEVTCR (Event Processor EVT Pin Control Registers)
+	 * SCU8 triger EVT2, and SCU11 triger EVT9
+	 */
+	{EPEVTCR0 + EPEVTCR_STRIDE * 0, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 1, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 2, 0x80000001},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 3, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 4, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 5, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 6, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 7, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 8, 0},
+	{EPEVTCR0 + EPEVTCR_STRIDE * 9, 0xB0000001},
+	/* EPCMPR (Event Processor Counter Compare Registers) */
+	{EPCMPR0 + EPCMPR_STRIDE * 0, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 1, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 2, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 3, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 4, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 5, 0x00000020},
+	{EPCMPR0 + EPCMPR_STRIDE * 6, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 7, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 8, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 9, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 10, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 11, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 12, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 13, 0},
+	{EPCMPR0 + EPCMPR_STRIDE * 14, 0x000000FF},
+	{EPCMPR0 + EPCMPR_STRIDE * 15, 0x000000FF},
+	/* EPCCR (Event Processor Counter Control Registers) */
+	{EPCCR0 + EPCCR_STRIDE * 0, 0},
+	{EPCCR0 + EPCCR_STRIDE * 1, 0},
+	{EPCCR0 + EPCCR_STRIDE * 2, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 3, 0},
+	{EPCCR0 + EPCCR_STRIDE * 4, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 5, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 6, 0},
+	{EPCCR0 + EPCCR_STRIDE * 7, 0},
+	{EPCCR0 + EPCCR_STRIDE * 8, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 9, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 10, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 11, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 12, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 13, 0},
+	{EPCCR0 + EPCCR_STRIDE * 14, 0x92840000},
+	{EPCCR0 + EPCCR_STRIDE * 15, 0x92840000},
+	/* EPSMCR (Event Processor SCU Mux Control Registers) */
+	{EPSMCR0 + EPSMCR_STRIDE * 0, 0},
+	{EPSMCR0 + EPSMCR_STRIDE * 1, 0},
+	{EPSMCR0 + EPSMCR_STRIDE * 2, 0x6C700000},
+	{EPSMCR0 + EPSMCR_STRIDE * 3, 0x2F000000},
+	{EPSMCR0 + EPSMCR_STRIDE * 4, 0x002F0000},
+	{EPSMCR0 + EPSMCR_STRIDE * 5, 0x00002E00},
+	{EPSMCR0 + EPSMCR_STRIDE * 6, 0x7C000000},
+	{EPSMCR0 + EPSMCR_STRIDE * 7, 0x30000000},
+	{EPSMCR0 + EPSMCR_STRIDE * 8, 0x64300000},
+	{EPSMCR0 + EPSMCR_STRIDE * 9, 0x00003000},
+	{EPSMCR0 + EPSMCR_STRIDE * 10, 0x65000030},
+	{EPSMCR0 + EPSMCR_STRIDE * 11, 0x31740000},
+	{EPSMCR0 + EPSMCR_STRIDE * 12, 0x7F000000},
+	{EPSMCR0 + EPSMCR_STRIDE * 13, 0x00003100},
+	{EPSMCR0 + EPSMCR_STRIDE * 14, 0x00000031},
+	{EPSMCR0 + EPSMCR_STRIDE * 15, 0x76000000},
+	/* EPACR (Event Processor Action Control Registers) */
+	{EPACR0 + EPACR_STRIDE * 0, 0},
+	{EPACR0 + EPACR_STRIDE * 1, 0},
+	{EPACR0 + EPACR_STRIDE * 2, 0},
+	{EPACR0 + EPACR_STRIDE * 3, 0x00000080},
+	{EPACR0 + EPACR_STRIDE * 4, 0},
+	{EPACR0 + EPACR_STRIDE * 5, 0x00000040},
+	{EPACR0 + EPACR_STRIDE * 6, 0},
+	{EPACR0 + EPACR_STRIDE * 7, 0},
+	{EPACR0 + EPACR_STRIDE * 8, 0},
+	{EPACR0 + EPACR_STRIDE * 9, 0x0000001C},
+	{EPACR0 + EPACR_STRIDE * 10, 0x00000020},
+	{EPACR0 + EPACR_STRIDE * 11, 0},
+	{EPACR0 + EPACR_STRIDE * 12, 0x00000003},
+	{EPACR0 + EPACR_STRIDE * 13, 0x06000000},
+	{EPACR0 + EPACR_STRIDE * 14, 0x04000000},
+	{EPACR0 + EPACR_STRIDE * 15, 0x02000000},
+	/* EPIMCR (Event Processor Input Mux Control Registers) */
+	{EPIMCR0 + EPIMCR_STRIDE * 0, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 1, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 2, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 3, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 4, 0x44000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 5, 0x40000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 6, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 7, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 8, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 9, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 10, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 11, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 12, 0x44000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 13, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 14, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 15, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 16, 0x6A000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 17, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 18, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 19, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 20, 0x48000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 21, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 22, 0x6C000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 23, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 24, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 25, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 26, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 27, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 28, 0x76000000},
+	{EPIMCR0 + EPIMCR_STRIDE * 29, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 30, 0},
+	{EPIMCR0 + EPIMCR_STRIDE * 31, 0x76000000},
+	/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+	{EPXTRIGCR, 0x0000FFDF},
+	/* end */
+	{FSM_END_FLAG, 0},
+};
+
+struct fsm_reg_vals npc_default_val[] = {
+	/* NPC triggered Memory-Mapped Access Registers */
+	{NCR, 0x80000000},
+	{MCCR1, 0},
+	{MCSR1, 0},
+	{MMAR1LO, 0},
+	{MMAR1HI, 0},
+	{MMDR1, 0},
+	{MCSR2, 0},
+	{MMAR2LO, 0},
+	{MMAR2HI, 0},
+	{MMDR2, 0},
+	{MCSR3, 0x80000000},
+	{MMAR3LO, 0x000E2130},
+	{MMAR3HI, 0x00030000},
+	{MMDR3, 0x00020000},
+	/* end */
+	{FSM_END_FLAG, 0},
+};
+
+/**
+ * fsl_fsm_setup - Configure EPU's FSM registers
+ * @base: the base address of registers
+ * @val: Pointer to address-value pairs for FSM registers
+ */
+void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val)
+{
+	struct fsm_reg_vals *data = val;
+
+	WARN_ON(!base || !data);
+	while (data->offset != FSM_END_FLAG) {
+		iowrite32be(data->value, base + data->offset);
+		data++;
+	}
+}
+
+void fsl_epu_setup_default(void __iomem *epu_base)
+{
+	fsl_fsm_setup(epu_base, epu_default_val);
+}
+
+void fsl_npc_setup_default(void __iomem *npc_base)
+{
+	fsl_fsm_setup(npc_base, npc_default_val);
+}
+
+void fsl_epu_clean_default(void __iomem *epu_base)
+{
+	u32 offset;
+
+	/* follow the exact sequence to clear the registers */
+	/* Clear EPACRn */
+	for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
+		iowrite32be(0, epu_base + offset);
+
+	/* Clear EPEVTCRn */
+	for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
+		iowrite32be(0, epu_base + offset);
+
+	/* Clear EPGCR */
+	iowrite32be(0, epu_base + EPGCR);
+
+	/* Clear EPSMCRn */
+	for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
+		iowrite32be(0, epu_base + offset);
+
+	/* Clear EPCCRn */
+	for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
+		iowrite32be(0, epu_base + offset);
+
+	/* Clear EPCMPRn */
+	for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
+		iowrite32be(0, epu_base + offset);
+
+	/* Clear EPCTRn */
+	for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
+		iowrite32be(0, epu_base + offset);
+
+	/* Clear EPIMCRn */
+	for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
+		iowrite32be(0, epu_base + offset);
+
+	/* Clear EPXTRIGCRn */
+	iowrite32be(0, epu_base + EPXTRIGCR);
+
+	/* Clear EPECRn */
+	for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
+		iowrite32be(0, epu_base + offset);
+}
--- /dev/null
+++ b/drivers/soc/fsl/sleep_fsm.h
@@ -0,0 +1,130 @@
+/*
+ * deep sleep FSM (finite-state machine) configuration
+ *
+ * Copyright 2018 NXP
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of the above-listed copyright holders nor the
+ *	 names of any contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_SLEEP_FSM_H
+#define _FSL_SLEEP_FSM_H
+
+#define FSL_STRIDE_4B	4
+#define FSL_STRIDE_8B	8
+
+/* End flag */
+#define FSM_END_FLAG		0xFFFFFFFFUL
+
+/* Block offsets */
+#define RCPM_BLOCK_OFFSET	0x00022000
+#define EPU_BLOCK_OFFSET	0x00000000
+#define NPC_BLOCK_OFFSET	0x00001000
+
+/* EPGCR (Event Processor Global Control Register) */
+#define EPGCR		0x000
+
+/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
+#define EPEVTCR0	0x050
+#define EPEVTCR9	0x074
+#define EPEVTCR_STRIDE	FSL_STRIDE_4B
+
+/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+#define EPXTRIGCR	0x090
+
+/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
+#define EPIMCR0		0x100
+#define EPIMCR31	0x17C
+#define EPIMCR_STRIDE	FSL_STRIDE_4B
+
+/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
+#define EPSMCR0		0x200
+#define EPSMCR15	0x278
+#define EPSMCR_STRIDE	FSL_STRIDE_8B
+
+/* EPECR0-15 (Event Processor Event Control Registers) */
+#define EPECR0		0x300
+#define EPECR15		0x33C
+#define EPECR_STRIDE	FSL_STRIDE_4B
+
+/* EPACR0-15 (Event Processor Action Control Registers) */
+#define EPACR0		0x400
+#define EPACR15		0x43C
+#define EPACR_STRIDE	FSL_STRIDE_4B
+
+/* EPCCRi0-15 (Event Processor Counter Control Registers) */
+#define EPCCR0		0x800
+#define EPCCR15		0x83C
+#define EPCCR31		0x87C
+#define EPCCR_STRIDE	FSL_STRIDE_4B
+
+/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
+#define EPCMPR0		0x900
+#define EPCMPR15	0x93C
+#define EPCMPR31	0x97C
+#define EPCMPR_STRIDE	FSL_STRIDE_4B
+
+/* EPCTR0-31 (Event Processor Counter Register) */
+#define EPCTR0		0xA00
+#define EPCTR31		0xA7C
+#define EPCTR_STRIDE	FSL_STRIDE_4B
+
+/* NPC triggered Memory-Mapped Access Registers */
+#define NCR		0x000
+#define MCCR1		0x0CC
+#define MCSR1		0x0D0
+#define MMAR1LO		0x0D4
+#define MMAR1HI		0x0D8
+#define MMDR1		0x0DC
+#define MCSR2		0x0E0
+#define MMAR2LO		0x0E4
+#define MMAR2HI		0x0E8
+#define MMDR2		0x0EC
+#define MCSR3		0x0F0
+#define MMAR3LO		0x0F4
+#define MMAR3HI		0x0F8
+#define MMDR3		0x0FC
+
+/* RCPM Core State Action Control Register 0 */
+#define CSTTACR0	0xB00
+
+/* RCPM Core Group 1 Configuration Register 0 */
+#define CG1CR0		0x31C
+
+struct fsm_reg_vals {
+	u32 offset;
+	u32 value;
+};
+
+void fsl_fsm_setup(void __iomem *base, struct fsm_reg_vals *val);
+void fsl_epu_setup_default(void __iomem *epu_base);
+void fsl_npc_setup_default(void __iomem *npc_base);
+void fsl_epu_clean_default(void __iomem *epu_base);
+
+#endif /* _FSL_SLEEP_FSM_H */