openwrt/target/linux/layerscape/patches-5.4/302-dts-0006-arm64-dts-ls1012a-accumulated-change-for-ls1012a-boa.patch

From 8fd1ab38e922383fa87db60c48c44ab0d5e6f1c1 Mon Sep 17 00:00:00 2001
From: Li Yang <leoyang.li@nxp.com>
Date: Thu, 2 May 2019 15:52:49 -0500
Subject: [PATCH] arm64: dts: ls1012a: accumulated change for ls1012a boards

commit 65c558ec270003e8e99cb58c940d3b913d08fa39
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date:   Tue May 15 08:47:19 2018 +0800

    arm64: dts: ls1012a: correct the register range of dcfg

    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>

commit 8f7b4cded4ea1fca53516ae8f5d5bc89af291f26
Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date:   Mon May 7 11:52:04 2018 +0530

    arm64: dts: ls1012a: Add LS1012A-FRWY board support

    LS1012A-FRWY is a different design from LS1012A-FRDM,
    but has some common SoC features. Key feature on this
    board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR,
    QuadSPI, Audio, UART.

    Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>

commit 94fc77837b3b6f4213a49b29ddc3e09e38ae5fbb
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date:   Mon Apr 2 16:16:47 2018 +0800

    arm64: dts: ls1012a: add dts entry for A-010650

    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>

commit d4164a6d8cffd8f09c451073754834d58b7ace19
Author: Suresh Gupta <suresh.gupta@nxp.com>
Date:   Thu Feb 1 23:44:15 2018 +0530

    arm64: dts: freescale: ls1012a: Add DT nodes for qspi

    Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
    Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>

commit 4fdc98a03492b732a48426a4180f7d6a36847e71
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date:   Wed Nov 1 10:31:47 2017 +0800

    arm64: dts: ls1012a: correct the i2c clock to 1/4 platform pll

    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>

commit bb534725996b92aff853a4dee43738629fd4ac08
Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date:   Wed Nov 29 06:31:23 2017 +0530

    arm64: dts: freescale: ls1012a: Disable PCIe node as default

    Keep PCIe node in "disabled" status as SoC default.
    Only enable it for boards with PCIe circuit designed,
    such as LS1012ARDB and LS1012AQDS.

    Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>

commit 6b9a3244baba2c5126f349800ecaad83ba97ee47
Author: Calvin Johnson <calvin.johnson@nxp.com>
Date:   Mon Oct 16 12:25:19 2017 +0530

    arm64: dts: freescale: ls1012a: fix RGMII tx delay issue

    Recently logic to enable RGMII tx delay was changed by
    below patch.

    https://patchwork.kernel.org/patch/9447581/

    Based on the patch, enabling tx delay again using rgmii-txid.

    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>

commit 1e17e247088f6e2c08041559e38053b70a9d2bbe
Author: Calvin Johnson <calvin.johnson@nxp.com>
Date:   Sat Sep 16 14:20:23 2017 +0530

    arm64: dts: freescale: ls1012a: update with pppfe support

            Update ls1012a dtsi and platform dts files with
    support for ppfe.

    Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
    Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>

commit e9661ed864d2a9d437057f97729410bb9af994f2
Author: Suresh Gupta <suresh.gupta@nxp.com>
Date:   Tue May 16 17:17:21 2017 +0530

    arm64: dts: ls1012a: add the DTS node for QSPI support

    There is a s25fs512s qspi flash on QDS, RDB and FRDM board.

    Signed-off-by: Yuan Yao <yao.yuan@nxp.com>

commit ed9c51239461fe0322da2e93f50033ea0d05bc4f
Author: Chenhui Zhao <chenhui.zhao@nxp.com>
Date:   Fri May 5 17:45:15 2017 +0800

    arm64: dts: ls1012a: add ftm0 node

    Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 58 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts  | 62 ++++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts  | 62 ++++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     | 68 +++++++++++++++++++++-
 4 files changed, 248 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -13,6 +13,11 @@
 	model = "LS1012A Freedom Board";
 	compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
 
+	aliases {
+		ethernet0 = &pfe_mac0;
+		ethernet1 = &pfe_mac1;
+	};
+
 	sys_mclk: clock-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -74,6 +79,44 @@
 	};
 };
 
+&pfe {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethernet@0 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0>;	/* GEM_ID */
+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x0>;
+		phy-mode = "sgmii";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x1>; /* enabled/disabled */
+		};
+	};
+
+	ethernet@1 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x1>;	/* GEM_ID */
+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x0>;
+		phy-mode = "sgmii";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x0>; /* enabled/disabled */
+		};
+	};
+};
+
 &sai2 {
 	status = "okay";
 };
@@ -81,3 +124,18 @@
 &sata {
 	status = "okay";
 };
+
+&qspi {
+	status = "okay";
+	qflash0: s25fs512s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -13,6 +13,11 @@
 	model = "LS1012A QDS Board";
 	compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
 
+	aliases {
+		ethernet0 = &pfe_mac0;
+		ethernet1 = &pfe_mac1;
+	};
+
 	sys_mclk: clock-mclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -57,6 +62,10 @@
 	};
 };
 
+&pcie {
+	status = "okay";
+};
+
 &dspi {
 	bus-num = <0>;
 	status = "okay";
@@ -128,6 +137,44 @@
 	};
 };
 
+&pfe {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethernet@0 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0>;	/* GEM_ID */
+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
+		fsl,gemac-phy-id = <0x1>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x2>;
+		phy-mode = "sgmii-2500";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x1>; /* enabled/disabled */
+		};
+	};
+
+	ethernet@1 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x1>;	/* GEM_ID */
+		fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x3>;
+		phy-mode = "sgmii-2500";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x0>; /* enabled/disabled */
+		};
+	};
+};
+
 &sai2 {
 	status = "okay";
 };
@@ -135,3 +182,18 @@
 &sata {
 	status = "okay";
 };
+
+&qspi {
+	status = "okay";
+	qflash0: s25fs512s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -12,6 +12,15 @@
 / {
 	model = "LS1012A RDB Board";
 	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+	aliases {
+		ethernet0 = &pfe_mac0;
+		ethernet1 = &pfe_mac1;
+	};
+};
+
+&pcie {
+	status = "okay";
 };
 
 &duart0 {
@@ -38,3 +47,56 @@
 &sata {
 	status = "okay";
 };
+
+&pfe {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethernet@0 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0>;	/* GEM_ID */
+		fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
+		fsl,gemac-phy-id = <0x2>;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x0>;
+		phy-mode = "sgmii";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x1>; /* enabled/disabled */
+		};
+	};
+
+	ethernet@1 {
+		compatible = "fsl,pfe-gemac-port";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x1>;	/* GEM_ID */
+		fsl,gemac-bus-id = < 0x1 >;	/* BUS_ID */
+		fsl,gemac-phy-id = < 0x1 >;	/* PHY_ID */
+		fsl,mdio-mux-val = <0x0>;
+		phy-mode = "rgmii-txid";
+		fsl,pfe-phy-if-flags = <0x0>;
+
+		mdio@0 {
+			reg = <0x0>; /* enabled/disabled */
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	qflash0: s25fs512s@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -260,7 +260,7 @@
 		dcfg: dcfg@1ee0000 {
 			compatible = "fsl,ls1012a-dcfg",
 				     "syscon";
-			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
 			big-endian;
 		};
 
@@ -317,13 +317,23 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		ftm0: ftm0@29d0000 {
+			compatible = "fsl,ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>,
+			      <0x0 0x1ee2140 0x0 0x4>;
+			reg-names = "ftm", "FlexTimer1";
+			interrupts = <0 86 0x4>;
+			big-endian;
+		};
+
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 3>;
+			scl-gpios = <&gpio0 13 0>;
 			status = "disabled";
 		};
 
@@ -395,6 +405,20 @@
 			big-endian;
 		};
 
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1012a-qspi", "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+			big-endian;
+			status = "disabled";
+		};
+
 		sai1: sai@2b50000 {
 			#sound-dai-cells = <0>;
 			compatible = "fsl,vf610-sai";
@@ -499,6 +523,46 @@
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		rcpm: rcpm@1ee2000 {
+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1";
+			reg = <0x0 0x1ee2000 0x0 0x1000>;
+			fsl,#rcpm-wakeup-cells = <1>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pfe_reserved: packetbuffer@83400000 {
+			reg = <0 0x83400000 0 0xc00000>;
+		};
+	};
+
+	pfe: pfe@04000000 {
+		compatible = "fsl,pfe";
+		reg =   <0x0 0x04000000 0x0 0xc00000>,	/* AXI 16M */
+			<0x0 0x83400000 0x0 0xc00000>;  /* PFE DDR 12M */
+		reg-names = "pfe", "pfe-ddr";
+		fsl,pfe-num-interfaces = <0x2>;
+		interrupts = <0 172 0x4>,    /* HIF interrupt */
+			     <0 173 0x4>,    /*HIF_NOCPY interrupt */
+			     <0 174 0x4>;    /* WoL interrupt */
+		interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
+		memory-region = <&pfe_reserved>;
+		fsl,pfe-scfg = <&scfg 0>;
+		fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
+		clocks = <&clockgen 4 0>;
+		clock-names = "pfe";
+
+		status = "okay";
+		pfe_mac0: ethernet@0 {
+		};
+
+		pfe_mac1: ethernet@1 {
+		};
 	};
 
 	firmware {