ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 22:23:27 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
130e5c63c7
openwrt/target/linux/bmips/image/bcm6368.mk

75 lines
1.8 KiB
Makefile
Raw Normal View History

bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
define Device/comtrend_vr-3025u
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := VR-3025u
CHIP_ID := 6368
CFE_BOARD_ID := 96368M-1541N
BLOCKSIZE := 0x20000
FLASH_MB := 32
bmips: switch to generic bcma/ssb fallback SPROM Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback SPROMs. This way we don't need to include the b43-sprom fixups on devices without Broadcom wireless. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-20 08:05:52 +00:00
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43222-sprom \
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
kmod-leds-gpio
endef
TARGET_DEVICES += comtrend_vr-3025u
bmips: add support for Observa VH4032N The Observa VH4032N is an xDSL wifi router with a vertical white casing and two internal antennas connected via UFL. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400MHz - RAM: 128 MB DDR - Flash: 32 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4/5 GHz: onboard Broadcom BCM43222 802.11abgn - USB: 3x 2.0 - Buttons: 2x, 1 reset - LEDs: 8x, blue and red - UART: 1x Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-08 22:09:33 +00:00
bmips: add support for Netgear DGND3700 v1, DGND3800B The Netgear DGND3700 v1 and DGND3800B are the same device but with different factory firmwares. It's an xDSL wifi router with a slim black shiny casing and 4 PCB internal antennas connected via UFL to a miniPCI detachable card. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 128 MB DDR - NOR Flash: 32 MB parallel (CFE and OS) - NAND flash: 128 MB (empty) - Ethernet LAN: 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM43222 802.11bgn - Wifi 5 GHz: Broadcom BCM43222 802.11abgn - USB: 2x 2.0 - Buttons: 3x, 1 reset - LEDs: 11x - UART: yes Installation via OEM web UI: 1. Open the Netgear administration web interface, by default: http://192.168.0.1 user: admin password: password 2. Look for "upgrade firmware" and proceed 3. Wait some minutes until it finishes Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-10 09:54:59 +00:00
define Device/netgear_dgnd3700-v1
$(Device/bcm63xx_netgear)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DGND3700
DEVICE_VARIANT := v1
CFE_BOARD_ID := 96368MVWG
CHIP_ID := 6368
BLOCKSIZE := 0x20000
NETGEAR_BOARD_ID := U12L144T01_NETGEAR_NEWLED
NETGEAR_REGION := 1
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES)
endef
TARGET_DEVICES += netgear_dgnd3700-v1
define Device/netgear_dgnd3800b
$(Device/bcm63xx_netgear)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DGND3800B
CFE_BOARD_ID := 96368MVWG
CHIP_ID := 6368
BLOCKSIZE := 0x20000
NETGEAR_BOARD_ID := U12L144T11_NETGEAR_NEWLED
NETGEAR_REGION := 1
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES)
endef
TARGET_DEVICES += netgear_dgnd3800b
bmips: add support for Netgear EVG2000 The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with two internal antennas integrated in the main PCB. Hardware: - SoC: Broadcom BCM6369 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 16 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 2x 2.0 - Buttons: 2x, 1 reset - LEDs: 10x - FXS: 2x - UART: yes Installation via CFE web UI: 1. Power off the router and make a temporal TX-RX shortcircuit on the serial pins. 2. Power on the router and wait 3 or more seconds 3. Remove the TX-RX shortcircuit 4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-10 19:05:33 +00:00
define Device/netgear_evg2000
$(Device/bcm63xx_netgear)
DEVICE_MODEL := EVG2000
CFE_BOARD_ID := 96369PVG
CHIP_ID := 6368
SOC := bcm6369
BLOCKSIZE := 0x20000
NETGEAR_BOARD_ID := U12H154T90_NETGEAR
NETGEAR_REGION := 1
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-4322-sprom \
kmod-leds-gpio
endef
TARGET_DEVICES += netgear_evg2000
bmips: add support for Observa VH4032N The Observa VH4032N is an xDSL wifi router with a vertical white casing and two internal antennas connected via UFL. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400MHz - RAM: 128 MB DDR - Flash: 32 MB parallel NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4/5 GHz: onboard Broadcom BCM43222 802.11abgn - USB: 3x 2.0 - Buttons: 2x, 1 reset - LEDs: 8x, blue and red - UART: 1x Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-08 22:09:33 +00:00
define Device/observa_vh4032n
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Observa
DEVICE_MODEL := VH4032N
IMAGES += sysupgrade.bin
CFE_BOARD_ID := 96368VVW
CHIP_ID := 6368
BLOCKSIZE := 0x20000
FLASH_MB := 32
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43222-sprom \
kmod-leds-gpio
endef
TARGET_DEVICES += observa_vh4032n
Reference in New Issue Copy Permalink