openwrt/target/linux/bmips/image
Daniel González Cabanelas 71a6f45fdf bmips: add support for Netgear EVG2000
The Netgear EVG2000 is a wifi gigabit router, 2.4 GHz single band with
two internal antennas integrated in the main PCB.

Hardware:
 - SoC: Broadcom BCM6369
 - CPU: dual core BMIPS4350 V3.1 @400Mhz
 - RAM: 64 MB DDR
 - Flash: 16 MB parallel NOR
 - LAN switch: Broadcom BCM53115, 5x 1Gbit
 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
 - USB: 2x 2.0
 - Buttons: 2x, 1 reset
 - LEDs: 10x
 - FXS: 2x
 - UART: yes

Installation via CFE web UI:
  1. Power off the router and make a temporal TX-RX shortcircuit on the
     serial pins.
  2. Power on the router and wait 3 or more seconds
  3. Remove the TX-RX shortcircuit
  4. Browse to http://192.168.1.1 or http://192.168.0.1 and upload the
     firmware
  5. Wait a few minutes for it to finish

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-11 09:54:52 +02:00
..
lzma-loader bmips: add new target 2021-02-22 18:29:44 +01:00
bcm6318.mk bmips: switch to generic bcma/ssb fallback SPROM 2023-04-23 12:18:35 +02:00
bcm6328.mk bmips: switch to generic bcma/ssb fallback SPROM 2023-04-23 12:18:35 +02:00
bcm6358.mk bmips: add subtargets for each SoC 2023-04-10 10:04:08 +02:00
bcm6362.mk bmips: dgnd3700v2: add b43 wireless driver 2023-04-23 12:19:02 +02:00
bcm6368.mk bmips: add support for Netgear EVG2000 2023-06-11 09:54:52 +02:00
bcm63268.mk bmips: shg2500: add BCM4360 fallback SPROM 2023-04-23 12:19:02 +02:00
Makefile bmips: add support for Netgear DGND3700 v1, DGND3800B 2023-06-10 15:37:52 +02:00