2015-09-04 14:45:00 +00:00
|
|
|
PART_NAME=firmware
|
2016-11-14 16:32:04 +00:00
|
|
|
REQUIRE_IMAGE_METADATA=1
|
2015-09-04 14:45:00 +00:00
|
|
|
|
2017-07-10 16:37:25 +00:00
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
2017-07-10 16:03:39 +00:00
|
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
|
2015-09-04 14:45:00 +00:00
|
|
|
platform_check_image() {
|
2016-11-20 19:06:15 +00:00
|
|
|
return 0;
|
2015-09-04 14:45:00 +00:00
|
|
|
}
|
|
|
|
|
2017-07-10 16:03:39 +00:00
|
|
|
platform_do_upgrade() {
|
2017-05-12 20:36:07 +00:00
|
|
|
case "$(board_name)" in
|
ipq806x: add support for Buffalo WXR-2533DHP
Buffalo WXR-2533DHP is a 2.4/5 GHz band 11ac router, based on Qualcomm
IPQ8064.
The U-Boot on WXR-2533DHP employs a complicated dual firmware
protection scheme against corruptions of the kernel and rootfs
images. See the notes in buffalo.sh for details.
specifications:
- Qualcomm IPQ8064 (384 - 1,400 MHz, 2C2T)
- 512 MB of RAM (DDR3)
- 256 MB of Flash (NAND)
- 4T4R 2.4/5 GHz Wlan (QCA9980)
- 5x 10/100/1000 Mbps Ethernet
- 10x LEDs, 8x keys (6x buttons, 2x slide-switches)
- 2x USB 3.0 Type-A
- 12VDC/4A AC Adapter
- UART through-hole on PCB
- J3: Vcc, GND, TX, RX from USB port side
- 115200n8
Boot instructions for the initramfs image:
1. Prepare the TFTP server with the initramfs image renamed to
"wxr2300dhp-initramfs.uImage" and IP address "192.168.11.10".
2. Press the "AOSS" button while powering on the WXR-2533DHP.
3. Wait until the "Wireless" LED flashes before releasing the AOSS button.
The WXR-2533DHP will grab the image from TFTP server and will boot it.
Flashing instructions:
To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`. Then wait ~120 seconds to
let it finish the flashing process.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded message]
2018-12-24 06:20:25 +00:00
|
|
|
buffalo,wxr-2533dhp)
|
|
|
|
buffalo_upgrade_prepare_ubi
|
|
|
|
CI_ROOTPART="ubi_rootfs"
|
2019-07-14 17:03:19 +00:00
|
|
|
nand_do_upgrade "$1"
|
ipq806x: add support for Buffalo WXR-2533DHP
Buffalo WXR-2533DHP is a 2.4/5 GHz band 11ac router, based on Qualcomm
IPQ8064.
The U-Boot on WXR-2533DHP employs a complicated dual firmware
protection scheme against corruptions of the kernel and rootfs
images. See the notes in buffalo.sh for details.
specifications:
- Qualcomm IPQ8064 (384 - 1,400 MHz, 2C2T)
- 512 MB of RAM (DDR3)
- 256 MB of Flash (NAND)
- 4T4R 2.4/5 GHz Wlan (QCA9980)
- 5x 10/100/1000 Mbps Ethernet
- 10x LEDs, 8x keys (6x buttons, 2x slide-switches)
- 2x USB 3.0 Type-A
- 12VDC/4A AC Adapter
- UART through-hole on PCB
- J3: Vcc, GND, TX, RX from USB port side
- 115200n8
Boot instructions for the initramfs image:
1. Prepare the TFTP server with the initramfs image renamed to
"wxr2300dhp-initramfs.uImage" and IP address "192.168.11.10".
2. Press the "AOSS" button while powering on the WXR-2533DHP.
3. Wait until the "Wireless" LED flashes before releasing the AOSS button.
The WXR-2533DHP will grab the image from TFTP server and will boot it.
Flashing instructions:
To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`. Then wait ~120 seconds to
let it finish the flashing process.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded message]
2018-12-24 06:20:25 +00:00
|
|
|
;;
|
2016-10-30 08:51:54 +00:00
|
|
|
compex,wpq864|\
|
2018-01-05 13:00:11 +00:00
|
|
|
netgear,d7800 |\
|
|
|
|
netgear,r7500 |\
|
|
|
|
netgear,r7500v2 |\
|
|
|
|
netgear,r7800 |\
|
|
|
|
qcom,ipq8064-ap148 |\
|
2019-07-17 09:32:54 +00:00
|
|
|
qcom,ipq8064-ap161)
|
2019-07-14 17:03:19 +00:00
|
|
|
nand_do_upgrade "$1"
|
2016-05-13 06:13:15 +00:00
|
|
|
;;
|
2019-07-17 09:32:54 +00:00
|
|
|
zyxel,nbg6817)
|
|
|
|
zyxel_do_upgrade "$1"
|
|
|
|
;;
|
2020-09-07 10:43:37 +00:00
|
|
|
edgecore,ecw5410)
|
|
|
|
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
|
|
|
if [ "$part" = "rootfs1" ]; then
|
|
|
|
fw_setenv active 2 || exit 1
|
|
|
|
CI_UBIPART="rootfs2"
|
|
|
|
else
|
|
|
|
fw_setenv active 1 || exit 1
|
|
|
|
CI_UBIPART="rootfs1"
|
|
|
|
fi
|
|
|
|
nand_do_upgrade "$1"
|
|
|
|
;;
|
2020-05-26 19:14:11 +00:00
|
|
|
linksys,ea7500-v1 |\
|
2016-10-30 08:51:54 +00:00
|
|
|
linksys,ea8500)
|
2019-07-14 17:03:19 +00:00
|
|
|
platform_do_upgrade_linksys "$1"
|
2016-10-30 08:51:54 +00:00
|
|
|
;;
|
2018-01-05 13:00:11 +00:00
|
|
|
tplink,c2600)
|
2016-05-27 14:26:42 +00:00
|
|
|
PART_NAME="os-image:rootfs"
|
|
|
|
MTD_CONFIG_ARGS="-s 0x200000"
|
2019-07-14 17:03:19 +00:00
|
|
|
default_do_upgrade "$1"
|
2016-05-27 14:26:42 +00:00
|
|
|
;;
|
2018-01-05 13:00:11 +00:00
|
|
|
tplink,vr2600v)
|
2016-11-23 17:51:15 +00:00
|
|
|
PART_NAME="kernel:rootfs"
|
|
|
|
MTD_CONFIG_ARGS="-s 0x200000"
|
2019-07-14 17:03:19 +00:00
|
|
|
default_do_upgrade "$1"
|
2016-11-23 17:51:15 +00:00
|
|
|
;;
|
2017-03-14 16:04:28 +00:00
|
|
|
*)
|
2019-07-14 17:03:19 +00:00
|
|
|
default_do_upgrade "$1"
|
2017-03-14 16:04:28 +00:00
|
|
|
;;
|
2016-05-27 14:26:42 +00:00
|
|
|
esac
|
|
|
|
}
|