Thijs Havinga
33d13ba8b4
Check for check_calib_inf.pid file
...
And kill only when it exists. Avoids error message on first call of wgd.sh
2022-05-16 13:43:31 +02:00
Xianjun Jiao
e60c3d1541
120316e70c704a006b8991b121336e145da34303
2022-05-16 12:23:01 +02:00
Xianjun Jiao
55a868b0af
Remove unnecessary sync/sleep in rf_init_11n.sh
2022-05-16 12:22:28 +02:00
Xianjun Jiao
94847d8099
Add dynamic reloading driver and FPGA
...
Rebooting/power-cycle is not needed anymore!
2022-05-13 17:01:41 +02:00
Xianjun Jiao
628c5d74a4
inject_80211 make location needs to be changed in post_config.sh
2022-03-30 13:06:16 +02:00
Xianjun Jiao
152dcbfbcc
Add inject_80211 make into post_config.sh
2022-03-30 11:47:41 +02:00
Xianjun Jiao
6bb9ef71e9
Example of how to add debug channel via sysfs and access it via script --> driver
2022-03-29 15:18:55 +02:00
thavinga
9fde3bff20
Displaying side channel plots with interactive mode to avoid jumping to foreground on update
...
Plus small fix for file closing
2022-03-28 16:53:07 +02:00
Xianjun Jiao
7d361288db
Add testmode argument (1 for AMPDU) to fosdem.sh
2022-03-28 12:35:17 +02:00
Xianjun Jiao
d572f3b04e
Remove the short GI capability from hostapd conf:
...
This brings us more stable (a bit less throughput in extreme case) system
2022-03-28 12:34:06 +02:00
Xianjun Jiao
bf351a865f
Improve the post_config.sh after the 1st time power on with new SD card:
...
1. chmod +x for all onboard .sh files
2. install the package for bridge functionalities by default
2022-03-28 12:32:36 +02:00
Xianjun Jiao
7d48624548
New rf/ad9361 initialization script with new ad9361 filter file:
...
1. Wider bandwidth for 11n (4 extra subcarriers than 11a/g)
2. No offset tuning anymore
2022-03-28 12:28:11 +02:00
Xianjun Jiao
a5bde87733
Update rf_init.sh -- less use for now:
...
We mainly use rf_init_11n.sh
2022-03-28 12:25:50 +02:00
Xianjun Jiao
0c346c2006
Script to set lbt (listen before talk) threshold
2022-03-28 12:23:36 +02:00
Xianjun Jiao
7efd1542d4
Userspace script for arbitrary IQ tx via tx_intf
2022-03-28 12:22:58 +02:00
Xianjun Jiao
10cc847f81
Script to enable/disable/show driver level tx/rx statistics
2022-03-28 12:21:30 +02:00
Xianjun Jiao
efb7b60626
Add script to limit statistics for packets from target/peer MAC address only
2022-03-28 12:20:28 +02:00
Xianjun Jiao
8c9b1b478d
Add script to enable all rx packet collecting for:
...
rx statistics.
For example, the received ACK normally will not be reported to the rx driver statistics. After this script, we collect all packet (including ACK, all control/management packet) for statistics
2022-03-28 12:19:33 +02:00
Xianjun Jiao
b1a9fd07da
Add scripts to ease rx gain setting
2022-03-28 12:17:16 +02:00
Xianjun Jiao
a918498713
Add script to restrict openwifi only use a fixed frequency:
...
to avoid extra tuning/scanning operation/procedure bringing ad9361 calibration and Linux channenl setting activities
2022-03-28 12:16:41 +02:00
Xianjun Jiao
0cfbe31c70
Add scripts to ease cw/max/min/difs/eifs/nav disable/enable
2022-03-28 12:14:55 +02:00
Xianjun Jiao
4eaae4b893
add on board helper script cd_adi_iio_dir.sh:
...
to find out the correct adi iio sysfs directory
2022-03-28 12:11:15 +02:00
thavinga
dce2bea9db
Make check_calib_inf.sh work for all boards
...
Search for direct_reg_access location.
2022-03-28 12:10:55 +02:00
Xianjun Jiao
b375844f73
improve the matlab script of iq capture:
...
1. more flexible
2. align the rx iq to the new hardware: natural order: lsb 16bit for I; msb 16bit for Q
2022-03-28 11:51:07 +02:00
thavinga
8a2eaff38f
Add useful files to user_space
...
- Continuously checking whether Tx Quadrature Calibration did not reach maximum convergence count, otherwise print warning. Started and killed by wgd.sh.
- set_tx_lo.sh to set or get Tx LO status
- set_tx_port.sh to set or get Tx RF Port A or B
2022-03-28 11:34:48 +02:00
Xianjun Jiao
4a12fa0498
Improve the wgd.sh according to the new design
2022-03-28 11:20:22 +02:00
Xianjun Jiao
80ccea555a
Add wpa_supplicant conf file for R&S CMW270 WiFi tester AP
2022-03-28 11:18:38 +02:00
Xianjun Jiao
e2f9904a29
Remove unnecessary scripts
2022-03-28 11:08:28 +02:00
Xianjun Jiao
e557222ed1
Add value print only option to side_ch_ctl.c:
...
When two arguments are input (no matter the exact value/form of the 2nd input), the side_ch_ctl will print value only to ease some bash script to call/use further (avoid extra parsing while extra info present)
2022-03-28 11:06:44 +02:00
Xianjun Jiao
ce26cc15c7
Userspace tool/example for arbitrary IQ generation via tx_intf
2022-03-28 11:02:59 +02:00
weiliu
7e3e6749ba
change xilinx dma and ad9361 drv location to avoid booting problem
2022-03-26 21:03:08 +01:00
Xianjun Jiao
ce40e055d2
Add modified ad9361_conv.c of our own:
...
Sometimes the unstable hardware can not pass the 61.44Msps self-test/calibration. Override it to 40Msps
2022-03-26 20:34:55 +01:00
Xianjun Jiao
e9a08f26b4
Add more packet type and sub-type support into inject_80211.c
2022-03-15 13:01:26 +01:00
Xianjun Jiao
a4eb20013d
Add openwifi CSI radar app note
2022-02-23 12:29:59 +01:00
Jiao Xianjun
abdb610f56
Scripts are adapted for SW HW decouple
...
To avoid openwifi-hw github submodule in openwifi. More flexible now.
2021-10-20 22:50:30 +02:00
Jiao Xianjun
61bd473364
Create wpa-openwifi.conf
2021-09-12 17:17:37 +02:00
MicroPhase
96a72425e7
Update get_fpga.sh
2021-08-24 11:17:53 +08:00
black-pigeon
d45655f234
the submodule uri keep the same with upstream
2021-08-24 11:14:33 +08:00
black-pigeon
0530334c7a
get_fpga.h is switch to branch antsdr instead of master
2021-08-13 17:57:55 +08:00
black-pigeon
ad0b112aa3
change openwifi-hw submodule url, add new sdr hardware antsdr-e310, add necessary modifications
2021-08-13 11:07:44 +08:00
Xianjun Jiao
eaaa3bfcfe
Improve the IQ sample Matlab script
...
For displaying and saving I/Q sample captured by openwifi side channel feature
2021-07-08 18:10:34 +02:00
Xianjun Jiao
d14d06e508
CSI fuzzer feature -- document to be finished
2021-05-13 17:45:39 +02:00
Xianjun Jiao
b66028eed3
Change the example packet in inject_80211.c from broadcast to unicast to ease the loopback debug based on dmesg printing (broadcast packet is not printed)
2021-05-06 16:03:01 +02:00
Xianjun Jiao
21e7ff9184
udpate_sdcard.sh: backup BOOT.BIN devicetree and kernel in SD card openwifi directory to collabrate with sdcard_boot_udpate.sh
2021-05-05 16:57:06 +02:00
Xianjun Jiao
0a17272215
sdcard_boot_udpate.sh: when downloading fails, warning will be given and old file will be used
2021-05-05 16:54:36 +02:00
Xianjun Jiao
56fcab2044
udpate ad9361 driver related stuffs:
...
we do not maintain our own (modified) ad9361 driver anymore! The original ad9361 driver in the Linux kernel tree can be used with some extra EXPORT_SYMBOL.
2021-05-05 16:44:39 +02:00
Xianjun Jiao
46886bdf9e
To avoid compiling error of inject_80211.c with new kernel (2019_R2), the rand_char size needs to be 1484 due to the space occupied by u8aRadiotapHeader and ieee_hdr in buffer
2021-05-03 09:58:01 +02:00
Xianjun Jiao
e1a9c183bc
update jpg in webserver
2021-04-07 10:00:20 +02:00
Xianjun Jiao
f0f5e22fc1
add libpcap-dev into the post_config.sh. it is needed by packet injection program compiling
2021-04-05 21:56:17 +02:00
Xianjun Jiao
1196ed1fef
remove our customized xilinx_dma.c. the original xilinx_dma.c in kernel can be used now
2021-04-05 21:45:27 +02:00
