Xianjun Jiao
2bbf19e8a8
update re-generate .dtb during verifying sdrpi
2022-09-03 22:57:33 +02:00
Xianjun Jiao
e3155ac1e8
Avoid cf_axi_dds reconnection in load_fpga_img.sh (otherwise crash)
2022-09-03 21:54:22 +02:00
Wei.Li
a066622e35
Sdrpi ( #211 )
...
Add sdrpi support
2022-09-02 16:36:38 +02:00
Jiao Xianjun
f3b2e60927
Merge pull request #195 from open-sdr/master
...
Sync master
2022-08-02 10:57:33 +02:00
Jiao Xianjun
c6dd9e71e5
Update packet-iq-self-loopback-test.md
2022-06-29 08:28:27 +02:00
Jiao Xianjun
7668cd233c
Merge pull request #183 from redfast00/iq-self-loopback-docs
...
Fix instructions for self-loopback
2022-06-29 08:23:26 +02:00
redfast00
b6f9140315
Fix instructions for self-loopback
2022-06-24 16:43:27 +02:00
Jiao Xianjun
05506cbaa0
pre trigger length 0 (wh11d0) goes into some coner case.
...
Change it to more safe value > 0. (At least 1!)
2022-06-21 11:26:04 +02:00
Jiao Xianjun
7fd216edc2
Update publications.md
2022-06-13 15:53:37 +02:00
Jiao Xianjun
46f8b19637
Update publications.md
2022-06-02 21:58:01 +02:00
Xianjun Jiao
88cef6e242
Add make clean into drv_and_fpga_package_gen.sh
2022-05-31 12:47:09 +02:00
Jiao Xianjun
d625adef57
Update videos.md
2022-05-18 21:35:53 +02:00
Jiao Xianjun
cff2d60ed5
Update README.md
2022-05-16 15:19:05 +02:00
Jiao Xianjun
e41746cb07
Update drv_fpga_dynamic_loading.md
2022-05-16 15:07:12 +02:00
Thijs Havinga
33d13ba8b4
Check for check_calib_inf.pid file
...
And kill only when it exists. Avoids error message on first call of wgd.sh
2022-05-16 13:43:31 +02:00
Xianjun Jiao
e60c3d1541
120316e70c704a006b8991b121336e145da34303
2022-05-16 12:23:01 +02:00
Xianjun Jiao
55a868b0af
Remove unnecessary sync/sleep in rf_init_11n.sh
2022-05-16 12:22:28 +02:00
Jiao Xianjun
fe92f91563
Update README.md
2022-05-16 10:29:18 +02:00
Jiao Xianjun
f3d767acbb
Update drv_fpga_dynamic_loading.md
2022-05-15 17:28:17 +02:00
Jiao Xianjun
bca2c023b0
Update README.md
2022-05-14 21:28:13 +02:00
Jiao Xianjun
2576903a4d
Add Suggested practice to generate variants
2022-05-14 21:27:12 +02:00
Xianjun Jiao
70cedb2220
Improve the doc
2022-05-13 22:39:33 +02:00
Xianjun Jiao
40773b7882
Add doc for dynamic reloading drv/FPGA
2022-05-13 17:03:29 +02:00
Xianjun Jiao
94847d8099
Add dynamic reloading driver and FPGA
...
Rebooting/power-cycle is not needed anymore!
2022-05-13 17:01:41 +02:00
Xianjun Jiao
1e86c1aa7d
Add conditional compiling to README
2022-05-13 16:59:04 +02:00
Xianjun Jiao
e9919b3785
Add conditional compiling for driver:
...
C pre-defined macros can be set when running make_all.sh.
See change/help in the make_all.sh script or running the script.
2022-05-13 16:57:39 +02:00
Xianjun Jiao
1895c3ae46
Only support allowed channel to avoid:
...
the issue of Let openwifi work at arbitrary frequency: ./sdrctl dev sdr0 set reg rf 1/5 NMPQ
the wpa_supplicant scanning does scan those not allowed channel (originally reported by our driver capabilities), but hostpad already actually uses a not allowed channel (by sdrctl) while beacon still indicates an allowed channel (hostapd rejects to run on not allowed channel). So, after wpa_supplicant discovers the beacon on a not allowed channel while the beacon contains an allowed channel, it gets confused
2022-05-13 16:51:58 +02:00
Xianjun Jiao
ab74dd7433
Fix the rssi_correction for WiFi 6E channel (close to 6GHz)
...
Verified by CMW270
2022-05-13 16:50:27 +02:00
Xianjun Jiao
b0d1d08222
Remove the reg 3 init in rx_intf.c:
...
to avoid openwifi_start calling hw_init to override the FPGA loopback flag in reg 3 (value 256)
2022-05-13 16:48:30 +02:00
Xianjun Jiao
6aaa11651b
Improve the link style in README/doc
2022-05-13 16:45:25 +02:00
Jiao Xianjun
d63b772aca
Update frequent_trick.md
2022-04-27 09:38:30 +02:00
Jiao Xianjun
1477da1602
Update frequent_trick.md
2022-04-27 09:37:00 +02:00
Jiao Xianjun
c88a7dfd18
Add WoWMoM2022 paper by Thijs Havinga
2022-04-19 11:48:26 +02:00
Jiao Xianjun
5d6b78c965
Add method for increasing Tx power:
...
In the app note.
2022-04-13 08:58:05 +02:00
Jiao Xianjun
b9b3abd353
Update README.md
2022-04-04 11:20:58 +02:00
Jiao Xianjun
0e84893f08
Update README.md
2022-04-01 14:12:20 +02:00
Jiao Xianjun
a816a273f8
Update README.md
2022-04-01 12:31:59 +02:00
Jiao Xianjun
e91d8a2947
Update README.md
2022-04-01 11:33:41 +02:00
Jiao Xianjun
81493bdcfb
Update README.md
2022-04-01 10:59:19 +02:00
Jiao Xianjun
d5242439df
Update 64bit image openwifi-1.3.0-wilsele-
2022-04-01 10:50:04 +02:00
Jiao Xianjun
1b00373f88
Update FPGA image link for openwifi-1.3.0-wilsele
2022-04-01 10:34:53 +02:00
Jiao Xianjun
30d5f3221b
Merge pull request #151 from open-sdr/pre-release
...
openwifi-1.3.0-wilsele
2022-04-01 10:32:43 +02:00
Xianjun Jiao
90a9618231
doc and app notes update
2022-04-01 10:04:21 +02:00
Xianjun Jiao
425e8346ec
Add clock architecture and sensing picture
2022-04-01 10:01:42 +02:00
Xianjun Jiao
6fdc02fb32
Remove hdmi spdif and clkgen from the devicetree of zc706, because they are removed from the FPGA design
2022-04-01 10:00:39 +02:00
Xianjun Jiao
628c5d74a4
inject_80211 make location needs to be changed in post_config.sh
2022-03-30 13:06:16 +02:00
Xianjun Jiao
152dcbfbcc
Add inject_80211 make into post_config.sh
2022-03-30 11:47:41 +02:00
Xianjun Jiao
d6c1c3f7f5
Easier way to set arbitrary trx frequency via register rf 1 and 5:
...
Create helper function ad9361_tx_calibration() and openwifi_rf_rx_update_after_tuning() for frequency tuning. No matter it is from Linux request or rf register 1 (Tx freq override MHz) and 5 (Rx freq override MHz)
2022-03-30 11:36:36 +02:00
Xianjun Jiao
6bb9ef71e9
Example of how to add debug channel via sysfs and access it via script --> driver
2022-03-29 15:18:55 +02:00
Xianjun Jiao
e4d5d1a3ce
Add code for new statistics and setting channel via sysfs
2022-03-29 15:16:29 +02:00
