Implement basic plot synchronization

Per discussions about backfilling tests with conversion away from
angular, removing plot plugin from coverage requirement so as to
allow build to complete.

https://github.com/nasa/openmct/pull/1557#issuecomment-364239059

.circleci/config.yml

@@ -1,147 +0,0 @@
-version: 2.1
-executors:
-  linux:
-    docker:
-      - image: mcr.microsoft.com/playwright:focal
-orbs:
-  node: circleci/node@4.5.1
-  browser-tools: circleci/browser-tools@1.1.3
-jobs:
-  npm-audit:
-    executor: linux
-    steps:
-      - checkout
-      - node/install:
-          install-npm: true
-          node-version: lts/fermium
-      - run: npm install
-      - run: npm audit --audit-level=low
-  test:
-    parameters:
-      node-version:
-        type: string
-      browser:
-        type: string
-    executor: linux
-    steps:
-      - checkout
-      - restore_cache:
-          key: deps-{{ .Branch }}--<< parameters.node-version >>--{{ checksum "package.json" }}
-      - node/install:
-          install-npm: false
-          node-version: << parameters.node-version >>
-      - run: npm install
-      - when:
-          condition:
-            equal: [ "FirefoxESR", <<parameters.browser>> ]
-          steps:
-            - browser-tools/install-firefox:
-                version: "91.2.0esr" #https://archive.mozilla.org/pub/firefox/releases/          
-      - when:
-          condition:
-            equal: [ "FirefoxHeadless", <<parameters.browser>> ]
-          steps:
-            - browser-tools/install-firefox
-      - when:
-          condition:
-            equal: [ "ChromeHeadless", <<parameters.browser>> ]
-          steps:
-            - browser-tools/install-chrome:
-                replace-existing: false
-      - save_cache:
-          key: deps-{{ .Branch }}--<< parameters.node-version >>--{{ checksum "package.json" }}
-          paths:
-            - ~/.npm
-            - ~/.cache
-            - node_modules
-      - when:
-          condition:
-            equal: [ "", <<parameters.browser>> ] #Only run linting when browsers are not running to save time
-          steps:
-            - run: npm run lint
-      - when:
-          condition: << parameters.browser >> #Truthy evaluation to only run when browser is specified
-          steps:
-            - run: npm run test:coverage -- --browsers=<<parameters.browser>>
-            - store_test_results:
-                path: dist/reports/tests/
-            - store_artifacts:
-                path: dist/reports/
-  e2e:
-    parameters:
-      node-version:
-        type: string
-      suite:
-        type: string
-    executor: linux
-    environment:
-      NODE_ENV: development # Needed if playwright is in `devDependencies`
-    steps:
-      - checkout
-      - restore_cache:
-          key: deps-{{ .Branch }}--<< parameters.node-version >>--{{ checksum "package.json" }}
-      - node/install:
-          install-npm: false
-          node-version: << parameters.node-version >>
-      - run: npm install
-      - save_cache:
-          key: deps-{{ .Branch }}--<< parameters.node-version >>--{{ checksum "package.json" }}
-          paths:
-            - ~/.npm
-            - ~/.cache
-            - node_modules
-      - run: npx playwright install
-      - run: npm run test:e2e:<<parameters.suite>>
-      - store_test_results:
-          path: test-results/results.xml
-      - store_artifacts:
-          path: test-results
-workflows:
-  matrix-tests:
-    jobs:
-      - test:
-          post-steps:
-            - run:
-                command:
-                  curl -Os https://uploader.codecov.io/latest/linux/codecov;chmod +x codecov;./codecov              
-          name: node10-chrome
-          node-version: lts/dubnium
-          browser: ChromeHeadless
-      - test:
-          name: node12-build-lint
-          node-version: lts/erbium
-          browser: "" #Skip unit tests
-      - test: 
-          name: node14-build-lint
-          node-version: lts/fermium
-          browser: "" #Skip unit tests
-      - e2e:
-          name: e2e-smoke
-          node-version: lts/fermium
-          suite: ci
-  nightly:
-    jobs:
-      - test:
-          name: node10-chrome-nightly
-          node-version: lts/dubnium
-          browser: ChromeHeadless
-      - test:
-          name: node12-firefoxESR-nightly
-          node-version: lts/erbium
-          browser: FirefoxESR
-      - test:
-          name: node14-firefox-nightly
-          node-version: lts/fermium
-          browser: FirefoxHeadless
-      - npm-audit
-      - e2e:
-          name: e2e-full
-          node-version: lts/fermium
-          suite: full
-    triggers:
-      - schedule:
-          cron: "0 0 * * *"
-          filters:
-            branches:
-              only:
-                - master

.eslintrc.js

@@ -1,270 +0,0 @@
-const LEGACY_FILES = ["platform/**", "example/**"];
-module.exports = {
-    "env": {
-        "browser": true,
-        "es6": true,
-        "jasmine": true,
-        "amd": true
-    },
-    "globals": {
-        "_": "readonly"
-    },
-    "extends": [
-        "eslint:recommended",
-        "plugin:vue/recommended",
-        "plugin:you-dont-need-lodash-underscore/compatible"
-    ],
-    "parser": "vue-eslint-parser",
-    "parserOptions": {
-        "parser": "babel-eslint",
-        "allowImportExportEverywhere": true,
-        "ecmaVersion": 2015,
-        "ecmaFeatures": {
-            "impliedStrict": true
-        }
-    },
-    "rules": {
-        "you-dont-need-lodash-underscore/omit": "off",
-        "you-dont-need-lodash-underscore/throttle": "off",
-        "you-dont-need-lodash-underscore/flatten": "off",
-        "no-bitwise": "error",
-        "curly": "error",
-        "eqeqeq": "error",
-        "guard-for-in": "error",
-        "no-extend-native": "error",
-        "no-inner-declarations": "off",
-        "no-use-before-define": ["error", "nofunc"],
-        "no-caller": "error",
-        "no-sequences": "error",
-        "no-irregular-whitespace": "error",
-        "no-new": "error",
-        "no-shadow": "error",
-        "no-undef": "error",
-        "no-unused-vars": [
-            "error",
-            {
-                "vars": "all",
-                "args": "none"
-            }
-        ],
-        "no-console": "off",
-        "no-trailing-spaces": "error",
-        "space-before-function-paren": [
-            "error",
-            {
-                "anonymous": "always",
-                "asyncArrow": "always",
-                "named": "never"
-            }
-        ],
-        "array-bracket-spacing": "error",
-        "space-in-parens": "error",
-        "space-before-blocks": "error",
-        "comma-dangle": "error",
-        "eol-last": "error",
-        "new-cap": [
-            "error",
-            {
-                "capIsNew": false,
-                "properties": false
-            }
-        ],
-        "dot-notation": "error",
-        "indent": ["error", 4],
-
-        // https://eslint.org/docs/rules/no-case-declarations
-        "no-case-declarations": "error",
-        // https://eslint.org/docs/rules/max-classes-per-file
-        "max-classes-per-file": ["error", 1],
-        // https://eslint.org/docs/rules/no-eq-null
-        "no-eq-null": "error",
-        // https://eslint.org/docs/rules/no-eval
-        "no-eval": "error",
-        // https://eslint.org/docs/rules/no-floating-decimal
-        "no-floating-decimal": "error",
-        // https://eslint.org/docs/rules/no-implicit-globals
-        "no-implicit-globals": "error",
-        // https://eslint.org/docs/rules/no-implied-eval
-        "no-implied-eval": "error",
-        // https://eslint.org/docs/rules/no-lone-blocks
-        "no-lone-blocks": "error",
-        // https://eslint.org/docs/rules/no-loop-func
-        "no-loop-func": "error",
-        // https://eslint.org/docs/rules/no-new-func
-        "no-new-func": "error",
-        // https://eslint.org/docs/rules/no-new-wrappers
-        "no-new-wrappers": "error",
-        // https://eslint.org/docs/rules/no-octal-escape
-        "no-octal-escape": "error",
-        // https://eslint.org/docs/rules/no-proto
-        "no-proto": "error",
-        // https://eslint.org/docs/rules/no-return-await
-        "no-return-await": "error",
-        // https://eslint.org/docs/rules/no-script-url
-        "no-script-url": "error",
-        // https://eslint.org/docs/rules/no-self-compare
-        "no-self-compare": "error",
-        // https://eslint.org/docs/rules/no-sequences
-        "no-sequences": "error",
-        // https://eslint.org/docs/rules/no-unmodified-loop-condition
-        "no-unmodified-loop-condition": "error",
-        // https://eslint.org/docs/rules/no-useless-call
-        "no-useless-call": "error",
-        // https://eslint.org/docs/rules/wrap-iife
-        "wrap-iife": "error",
-        // https://eslint.org/docs/rules/no-nested-ternary
-        "no-nested-ternary": "error",
-        // https://eslint.org/docs/rules/switch-colon-spacing
-        "switch-colon-spacing": "error",
-        // https://eslint.org/docs/rules/no-useless-computed-key
-        "no-useless-computed-key": "error",
-        // https://eslint.org/docs/rules/rest-spread-spacing
-        "rest-spread-spacing": ["error"],
-        // https://eslint.org/docs/rules/no-var
-        "no-var": "error",
-        // https://eslint.org/docs/rules/one-var
-        "one-var": ["error", "never"],
-        // https://eslint.org/docs/rules/default-case-last
-        "default-case-last": "error",
-        // https://eslint.org/docs/rules/default-param-last
-        "default-param-last": "error",
-        // https://eslint.org/docs/rules/grouped-accessor-pairs
-        "grouped-accessor-pairs": "error",
-        // https://eslint.org/docs/rules/no-constructor-return
-        "no-constructor-return": "error",
-        // https://eslint.org/docs/rules/array-callback-return
-        "array-callback-return": "error",
-        // https://eslint.org/docs/rules/no-invalid-this
-        "no-invalid-this": "error", // Believe this one actually surfaces some bugs
-        // https://eslint.org/docs/rules/func-style
-        "func-style": ["error", "declaration"],
-        // https://eslint.org/docs/rules/no-unused-expressions
-        "no-unused-expressions": "error",
-        // https://eslint.org/docs/rules/no-useless-concat
-        "no-useless-concat": "error",
-        // https://eslint.org/docs/rules/radix
-        "radix": "error",
-        // https://eslint.org/docs/rules/require-await
-        "require-await": "error",
-        // https://eslint.org/docs/rules/no-alert
-        "no-alert": "error",
-        // https://eslint.org/docs/rules/no-useless-constructor
-        "no-useless-constructor": "error",
-        // https://eslint.org/docs/rules/no-duplicate-imports
-        "no-duplicate-imports": "error",
-
-        // https://eslint.org/docs/rules/no-implicit-coercion
-        "no-implicit-coercion": "error",
-        //https://eslint.org/docs/rules/no-unneeded-ternary
-        "no-unneeded-ternary": "error",
-        // https://eslint.org/docs/rules/semi
-        "semi": ["error", "always"],
-        // https://eslint.org/docs/rules/no-multi-spaces
-        "no-multi-spaces": "error",
-        // https://eslint.org/docs/rules/key-spacing
-        "key-spacing": ["error", {
-            "afterColon": true
-        }],
-        // https://eslint.org/docs/rules/keyword-spacing
-        "keyword-spacing": ["error", {
-            "before": true,
-            "after": true
-        }],
-        // https://eslint.org/docs/rules/comma-spacing
-        // Also requires one line code fix
-        "comma-spacing": ["error", {
-            "after": true
-        }],
-        //https://eslint.org/docs/rules/no-whitespace-before-property
-        "no-whitespace-before-property": "error",
-        // https://eslint.org/docs/rules/object-curly-newline
-        "object-curly-newline": ["error", {
-            "consistent": true,
-            "multiline": true
-        }],
-        // https://eslint.org/docs/rules/object-property-newline
-        "object-property-newline": "error",
-        // https://eslint.org/docs/rules/brace-style
-        "brace-style": "error",
-        // https://eslint.org/docs/rules/no-multiple-empty-lines
-        "no-multiple-empty-lines": ["error", {"max": 1}],
-        // https://eslint.org/docs/rules/operator-linebreak
-        "operator-linebreak": ["error", "before", {"overrides": {"=": "after"}}],
-        // https://eslint.org/docs/rules/padding-line-between-statements
-        "padding-line-between-statements": ["error", {
-            "blankLine": "always",
-            "prev": "multiline-block-like",
-            "next": "*"
-        }, {
-            "blankLine": "always",
-            "prev": "*",
-            "next": "return"
-        }],
-        // https://eslint.org/docs/rules/space-infix-ops
-        "space-infix-ops": "error",
-        // https://eslint.org/docs/rules/space-unary-ops
-        "space-unary-ops": ["error", {
-            "words": true,
-            "nonwords": false
-        }],
-        // https://eslint.org/docs/rules/arrow-spacing
-        "arrow-spacing": "error",
-        // https://eslint.org/docs/rules/semi-spacing
-        "semi-spacing": ["error", {
-            "before": false,
-            "after": true
-        }],
-
-        "vue/html-indent": [
-            "error",
-            4,
-            {
-                "attribute": 1,
-                "baseIndent": 0,
-                "closeBracket": 0,
-                "alignAttributesVertically": true,
-                "ignores": []
-            }
-        ],
-        "vue/html-self-closing": ["error",
-            {
-                "html": {
-                    "void": "never",
-                    "normal": "never",
-                    "component": "always"
-                },
-                "svg": "always",
-                "math": "always"
-            }
-        ],
-        "vue/max-attributes-per-line": ["error", {
-            "singleline": 1,
-            "multiline": {
-                "max": 1,
-                "allowFirstLine": true
-            }
-        }],
-        "vue/multiline-html-element-content-newline": "off",
-        "vue/singleline-html-element-content-newline": "off",
-        "vue/no-mutating-props": "off"
-
-    },
-    "overrides": [
-        {
-            "files": LEGACY_FILES,
-            "rules": {
-                "no-unused-vars": [
-                    "warn",
-                    {
-                        "vars": "all",
-                        "args": "none",
-                        "varsIgnorePattern": "controller"
-                    }
-                ],
-                "no-nested-ternary": "off",
-                "no-var": "off",
-                "one-var": "off"
-            }
-        }
-    ]
-};

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,44 +0,0 @@
----
-name: Bug report
-about: File a Bug !
-title: ''
-labels: type:bug
-assignees: ''
-
----
-
-<!--- Focus on user impact in the title. Use the Summary Field to -->
-<!--- describe the problem technically. -->
-
-#### Summary
-<!--- A description of the issue encountered. When possible, a description -->
-<!--- of the impact of the issue. What use case does it impede?-->
-
-#### Expected vs Current Behavior
-<!--- Tell us what should have happened -->
-
-#### Impact Check List
-<!--- Please select from the following options -->
-
-- [ ] Data loss or misrepresented data?
-- [ ] Regression? Did this used to work or has it always been broken?
-- [ ] Is there a workaround available?
-- [ ] Does this impact a critical component?
-- [ ] Is this just a visual bug?
-
-#### Steps to Reproduce
-<!--- Provide a link to a live example, or an unambiguous set of steps to -->
-<!--- reproduce this bug. Include code to reproduce, if relevant -->
-1.
-2.
-3.
-4.
-
-#### Environment
-* Open MCT Version: <!--- date of build, version, or SHA -->
-* Deployment Type: <!--- npm dev? VIPER Dev? openmct-yamcs? -->
-* OS:
-* Browser:
-
-#### Additional Information
-<!--- Include any screenshots, gifs, or logs which will expedite triage -->

.github/ISSUE_TEMPLATE/config.yml

@@ -1,5 +0,0 @@
-blank_issues_enabled: true
-contact_links:
-  - name: Discussions
-    url: https://github.com/nasa/openmct/discussions
-    about: Have a question about the project?

.github/ISSUE_TEMPLATE/enhancement-request.md

@@ -1,20 +0,0 @@
----
-name: Enhancement request
-about: Suggest an enhancement or new improvement for this project
-title: ''
-labels: type:enhancement
-assignees: ''
-
----
-
-**Is your feature request related to a problem? Please describe.**
-A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
-
-**Describe the solution you'd like**
-A clear and concise description of what you want to happen.
-
-**Describe alternatives you've considered**
-A clear and concise description of any alternative solutions or features you've considered.
-
-**Additional context**
-Add any other context or screenshots about the feature request here.

.github/ISSUE_TEMPLATE/maintenance-type.md

@@ -1,11 +0,0 @@
----
-name: Maintenance
-about: Add, update or remove documentation, tests, or dependencies.
-title: ''
-labels: type:maintenance
-assignees: ''
-
----
-
-#### Summary
-<!--- Generally describe the purpose of the change. -->

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,13 +0,0 @@
-### All Submissions:
-
-* [ ] Have you followed the guidelines in our [Contributing document](https://github.com/nasa/openmct/blob/master/CONTRIBUTING.md)?
-* [ ] Have you checked to ensure there aren't other open [Pull Requests](https://github.com/nasa/openmct/pulls) for the same update/change?
-* [ ] Is this change backwards compatible? For example, developers won't need to change how they are calling the API or how they've extended core plugins such as Tables or Plots.
-
-### Author Checklist
-
-* [ ] Changes address original issue?
-* [ ] Unit tests included and/or updated with changes?
-* [ ] Command line build passes?
-* [ ] Has this been smoke tested?
-* [ ] Testing instructions included in associated issue?

.github/dependabot.yml

@@ -1,26 +0,0 @@
-
-version: 2
-updates:
-  - package-ecosystem: "npm"
-    directory: "/"
-    schedule:
-      interval: "daily"  
-    open-pull-requests-limit: 4
-    labels:
-      - "type:maintenance"
-      - "dependencies"
-      - "pr:e2e"
-    allow:
-      - dependency-name: "eslint*"
-      - dependency-name: "karma*"
-      - dependency-name: "jasmine*"
-      - dependency-name: "playwright*"
-      - dependency-name: "percy*"
-
-  - package-ecosystem: "github-actions"
-    directory: "/"
-    schedule:
-      interval: "daily"    
-    labels:
-      - "type:maintenance"
-      - "dependencies"

.github/workflows/codeql-analysis.yml

@@ -1,43 +0,0 @@
-
-name: "CodeQL"
-
-on:
-  push:
-    branches: [ master ]
-  pull_request:
-    branches: [ master ]
-    paths-ignore:
-      - '**/*Spec.js'
-      - '**/*.md'
-      - '**/*.txt'
-      - '**/*.yml'
-      - '**/*.yaml'
-      - '**/*.spec.js'
-      - '**/*.config.js'
-  schedule:
-    - cron: '28 21 * * 3'
-
-jobs:
-  analyze:
-    name: Analyze
-    runs-on: ubuntu-latest
-    permissions:
-      actions: read
-      contents: read
-      security-events: write
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v2
-
-    # Initializes the CodeQL tools for scanning.
-    - name: Initialize CodeQL
-      uses: github/codeql-action/init@v1
-      with:
-        languages: javascript
-
-    - name: Autobuild
-      uses: github/codeql-action/autobuild@v1
-
-    - name: Perform CodeQL Analysis
-      uses: github/codeql-action/analyze@v1

.github/workflows/e2e-pr.yml

@@ -1,53 +0,0 @@
-name: "e2e-pr"
-on:
-  workflow_dispatch:
-  pull_request:
-    types: [ labeled ]
-
-jobs:
-  e2e-full:
-    if: ${{ github.event.label.name == 'pr:e2e' }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Trigger Success
-        uses: actions/github-script@v5
-        with:
-          script: |
-            github.rest.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: 'Started e2e Run. Follow along: https://github.com/nasa/openmct/actions/runs/' + context.runId
-            })
-      - uses: actions/checkout@v2
-      - uses: actions/setup-node@v2
-        with:
-          node-version: '14'
-      - run: npm install
-      - run: npm run test:e2e:full
-      - name: Archive test results
-        uses: actions/upload-artifact@v2
-        with:
-          path: test-results
-      - name: Test success
-        if: ${{ success() }}
-        uses: actions/github-script@v5
-        with:
-          script: |
-            github.rest.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: 'Success ✅ ! Build artifacts are here: https://github.com/nasa/openmct/actions/runs/' + context.runId
-            })
-      - name: Test failure
-        if: ${{ failure() }}
-        uses: actions/github-script@v5
-        with:
-          script: |
-            github.rest.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: 'Failure ❌ ! Build artifacts are here: https://github.com/nasa/openmct/actions/runs/' + context.runId
-            })

.github/workflows/e2e-visual.yml

@@ -1,23 +0,0 @@
-name: "e2e-visual"
-on:
-  workflow_dispatch:
-  pull_request:
-    types: 
-      - labeled
-  schedule:
-    - cron: '28 21 * * 1-5'
-
-jobs:
-  e2e-visual:
-    if: ${{ github.event.label.name == 'pr:visual' }} || ${{ github.event.workflow_dispatch }} || ${{ github.event.schedule }}
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - uses: actions/setup-node@v2
-        with:
-          node-version: '14'
-      - run: npm install
-      - name: Run the e2e visual tests
-        run: npm run test:e2e:visual
-        env:
-          PERCY_TOKEN: ${{ secrets.PERCY_TOKEN }}

.github/workflows/e2e.yml

@@ -1,21 +0,0 @@
-name: "e2e"
-on:
-  workflow_dispatch:
-    inputs: 
-      version:
-        description: 'Which branch do you want to test?' # Limited to branch for now
-        required: false
-        default: 'master' 
-jobs:
-  e2e:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-        with:
-          ref: ${{ github.event.inputs.version }}
-      - uses: actions/setup-node@v2
-        with:
-          node-version: '14'
-      - run: npm install
-      - name: Run the e2e tests
-        run: npm run test:e2e:ci

.github/workflows/lighthouse.yml

@@ -1,20 +0,0 @@
-name: lighthouse
-on:
-  workflow_dispatch:
-    inputs: 
-      version:
-        description: 'Which branch do you want to test?' # Limited to branch for now
-        required: false
-        default: 'master' 
-jobs:
-  lighthouse:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-        with:
-          ref: ${{ github.event.inputs.version }}
-      - uses: actions/setup-node@v2
-        with:
-          node-version: '14'
-      - run: npm install && npm install -g @lhci/cli #Don't want to include this in our deps
-      - run: lhci autorun

.github/workflows/npm-prerelease.yml

@@ -1,33 +0,0 @@
-# This workflow will run tests using node and then publish a package to npmjs when a prerelease is created
-# For more information see: https://help.github.com/actions/language-and-framework-guides/publishing-nodejs-packages
-
-name: npm_prerelease
-
-on:
-  release:
-    types: [prereleased]
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - uses: actions/setup-node@v2
-        with:
-          node-version: 14
-      - run: npm install
-      - run: npm test
-
-  publish-npm-prerelease:
-    needs: build
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - uses: actions/setup-node@v2
-        with:
-          node-version: 14
-          registry-url: https://registry.npmjs.org/
-      - run: npm install
-      - run: npm publish --access public --tag unstable
-        env:
-          NODE_AUTH_TOKEN: ${{ secrets.NPM_TOKEN }}

.gitignore

@@ -37,17 +37,4 @@ protractor/logs
 # npm-debug log
 npm-debug.log
 
-# karma reports
-report.*.json
-
-# Lighthouse reports
-.lighthouseci
-
-# e2e test artifacts
-test-results
-allure-results
-
 package-lock.json
-
-#codecov artifacts
-codecov

.jscsrc

@@ -0,0 +1,5 @@
+{
+    "preset": "crockford",
+    "requireMultipleVarDecl": false,
+    "requireVarDeclFirst": false
+}

.jshintrc

@@ -0,0 +1,26 @@
+{
+    "bitwise": true,
+    "browser": true,
+    "curly": true,
+    "eqeqeq": true,
+    "forin": true,
+    "freeze": true,
+    "funcscope": false,
+    "futurehostile": true,
+    "latedef": true,
+    "noarg": true,
+    "nocomma": true,
+    "nonbsp": true,
+    "nonew": true,
+    "predef": [
+        "define",
+        "Promise",
+        "WeakMap",
+        "Map"
+    ],
+    "shadow": "outer",
+    "strict": "implied",
+    "undef": true,
+    "unused": "vars",
+    "latedef": "nofunc"
+}

.npmignore

@@ -33,12 +33,3 @@ protractor/logs
 
 # npm-debug log
 npm-debug.log
-
-# Infra and tests
-.circleci
-.github
-e2e
-codecov.yml
-lighthouserc.yml
-*.Spec.js
-karma.conf.js

.npmrc

@@ -1 +0,0 @@
-loglevel=warn

API.md

@@ -1,60 +1,3 @@
-<!-- START doctoc generated TOC please keep comment here to allow auto update -->
-<!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE -->
-**Table of Contents** 
-
-- [Building Applications With Open MCT](#building-applications-with-open-mct)
-  - [Scope and purpose of this document](#scope-and-purpose-of-this-document)
-  - [Building From Source](#building-from-source)
-  - [Starting an Open MCT application](#starting-an-open-mct-application)
-  - [Plugins](#plugins)
-    - [Defining and Installing a New Plugin](#defining-and-installing-a-new-plugin)
-  - [Domain Objects and Identifiers](#domain-objects-and-identifiers)
-    - [Object Attributes](#object-attributes)
-    - [Domain Object Types](#domain-object-types)
-  - [Root Objects](#root-objects)
-  - [Object Providers](#object-providers)
-  - [Composition Providers](#composition-providers)
-    - [Adding Composition Providers](#adding-composition-providers)
-    - [Default Composition Provider](#default-composition-provider)
-  - [Telemetry API](#telemetry-api)
-    - [Integrating Telemetry Sources](#integrating-telemetry-sources)
-      - [Telemetry Metadata](#telemetry-metadata)
-        - [Values](#values)
-          - [Value Hints](#value-hints)
-        - [The Time Conductor and Telemetry](#the-time-conductor-and-telemetry)
-      - [Telemetry Providers](#telemetry-providers)
-      - [Telemetry Requests and Responses.](#telemetry-requests-and-responses)
-      - [Request Strategies **draft**](#request-strategies-draft)
-        - [`latest` request strategy](#latest-request-strategy)
-        - [`minmax` request strategy](#minmax-request-strategy)
-      - [Telemetry Formats **draft**](#telemetry-formats-draft)
-        - [Registering Formats](#registering-formats)
-      - [Telemetry Data](#telemetry-data)
-        - [Telemetry Datums](#telemetry-datums)
-      - [Limit Evaluators **draft**](#limit-evaluators-draft)
-    - [Telemetry Consumer APIs **draft**](#telemetry-consumer-apis-draft)
-  - [Time API](#time-api)
-    - [Time Systems and Bounds](#time-systems-and-bounds)
-      - [Defining and Registering Time Systems](#defining-and-registering-time-systems)
-      - [Getting and Setting the Active Time System](#getting-and-setting-the-active-time-system)
-      - [Time Bounds](#time-bounds)
-    - [Clocks](#clocks)
-      - [Defining and registering clocks](#defining-and-registering-clocks)
-      - [Getting and setting active clock](#getting-and-setting-active-clock)
-      - [Stopping an active clock](#stopping-an-active-clock)
-      - [Clock Offsets](#clock-offsets)
-    - [Time Events](#time-events)
-      - [List of Time Events](#list-of-time-events)
-    - [The Time Conductor](#the-time-conductor)
-      - [Time Conductor Configuration](#time-conductor-configuration)
-      - [Example conductor configuration](#example-conductor-configuration)
-  - [Indicators](#indicators)
-    - [The URL Status Indicator](#the-url-status-indicator)
-    - [Creating a Simple Indicator](#creating-a-simple-indicator)
-    - [Custom Indicators](#custom-indicators)
-
-<!-- END doctoc generated TOC please keep comment here to allow auto update -->
-
 # Building Applications With Open MCT
 
 ## Scope and purpose of this document
@@ -108,13 +51,15 @@ script loaders are also supported.
 <html>
 <head>
     <title>Open MCT</title>
-    <script src="dist/openmct.js"></script>
+    <script src="openmct.js"></script>
 </head>
 <body>
     <script>
+        openmct.setAssetPath('openmct/dist');
         openmct.install(openmct.plugins.LocalStorage());
         openmct.install(openmct.plugins.MyItems());
         openmct.install(openmct.plugins.UTCTimeSystem());
+        openmct.install(openmct.plugins.Espresso());
         openmct.start();
     </script>
 </body>
@@ -125,6 +70,9 @@ The Open MCT library included above requires certain assets such as html
 templates, images, and css. If you installed Open MCT from GitHub as described 
 in the section on [Building from Source](#building-from-source) then these
 assets will have been downloaded along with the Open MCT javascript library. 
+You can specify the location of these assets by calling `openmct.setAssetPath()`. 
+Typically this will be the same location as the `openmct.js` library is 
+included from.
 
 There are some plugins bundled with the application that provide UI, 
 persistence, and other default configuration which are necessary to be able to 
@@ -206,7 +154,7 @@ registry.
 
 eg.
 ```javascript
-openmct.types.addType('example.my-type', {
+openmct.types.addType('my-type', {
     name: "My Type",
     description: "This is a type that I added!",
     creatable: true
@@ -214,9 +162,8 @@ openmct.types.addType('example.my-type', {
 ```
 
 The `addType` function accepts two arguments:
-* A `string` key identifying the type. This key is used when specifying a type
-for an object.  We recommend prefixing your types with a namespace to avoid
-conflicts with other plugins.
+* A `string` key identifying the type. This key is used when specifying a type 
+for an object.
 * An object type specification. An object type definition supports the following 
 attributes      
     * `name`: a `string` naming this object type
@@ -231,7 +178,7 @@ attributes
     of this object. This is used for specifying an icon to appear next to each 
     object of this type.
 
-The [Open MCT Tutorials](https://github.com/nasa/openmct-tutorial) provide a 
+The [Open MCT Tutorials](https://github.com/openmct/openmct-tutorial) provide a 
 step-by-step examples of writing code for Open MCT that includes a [section on 
 defining a new object type](https://github.com/nasa/openmct-tutorial#step-3---providing-objects).
 
@@ -247,7 +194,7 @@ To do so, use the `addRoot` method of the object API.
 eg.
 ```javascript
 openmct.objects.addRoot({
-        namespace: "example.namespace",
+        namespace: "my-namespace",
         key: "my-key"
     });
 ```
@@ -288,12 +235,13 @@ It is expected that the `get` function will return a
 [Promise](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Promise) 
 that resolves with the object being requested.
 
-In future, object providers will support other methods to enable other operations with persistence stores, such as creating, updating, and deleting objects.
+In future, object providers will support other methods to enable other operations 
+with persistence stores, such as creating, updating, and deleting objects.
 
 ## Composition Providers
 
-The _composition_ of a domain object is the list of objects it contains, as
-shown (for example) in the tree for browsing. Open MCT provides a
+The _composition_ of a domain object is the list of objects it contains, as shown 
+(for example) in the tree for browsing. Open MCT provides a
 [default solution](#default-composition-provider) for composition, but there
 may be cases where you want to provide the composition of a certain object
 (or type of object) dynamically.
@@ -307,7 +255,7 @@ Composition Provider:
 ```javascript
 openmct.composition.addProvider({
     appliesTo: function (domainObject) {
-        return domainObject.type === 'example.my-type';
+        return domainObject.type === 'my-type';
     },
     load: function (domainObject) {
         return Promise.resolve(myDomainObjects);
@@ -325,9 +273,8 @@ These identifiers will be used to fetch Domain Objects from an [Object Provider]
 
 ### Default Composition Provider
 
-The default composition provider applies to any domain object with a 
-`composition` property. The value of `composition` should be an array of 
-identifiers, e.g.:
+The default composition provider applies to any domain object with a `composition` 
+property. The value of `composition` should be an array of identifiers, e.g.:
 
 ```javascript
 var domainObject = {
@@ -348,17 +295,13 @@ var domainObject = {
 
 ## Telemetry API
 
-The Open MCT telemetry API provides two main sets of interfaces-- one for
-integrating telemetry data into Open MCT, and another for developing Open MCT
-visualization plugins utilizing the telemetry API.  
+The Open MCT telemetry API provides two main sets of interfaces-- one for integrating telemetry data into Open MCT, and another for developing Open MCT visualization plugins utilizing telemetry API.  
 
-The APIs for visualization plugins are still a work in progress and docs may
-change at any time.  However, the APIs for integrating telemetry metadata into
-Open MCT are stable and documentation is included below.
+The APIs for visualization plugins are still a work in progress and docs may change at any time.  However, the APIs for integrating telemetry metadata into Open MCT are stable and documentation is included below.
 
 ### Integrating Telemetry Sources
 
-There are two main tasks for integrating telemetry sources-- describing telemetry objects with relevant metadata, and then providing telemetry data for those objects.  You'll use an [Object Provider](#object-providers) to provide objects with the necessary [Telemetry Metadata](#telemetry-metadata), and then register a [Telemetry Provider](#telemetry-providers) to retrieve telemetry data for those objects.  Alternatively, you can register a telemetry metadata provider to provide the necessary telemetry metadata.
+There are two main tasks for integrating telemetry sources-- describing telemetry objects with relevant metadata, and then providing telemetry data for those objects.  You'll use an [Object Provider](#object-providers) to provide objects with the necessary [Telemetry Metadata](#telemetry-metadata), and then register a [Telemetry Provider](#telemetry-providers) to retrieve telemetry data for those objects.
 
 For a step-by-step guide to building a telemetry adapter, please see the 
 [Open MCT Tutorials](https://github.com/nasa/openmct-tutorial).
@@ -412,7 +355,7 @@ attribute      | type   | flags    | notes
 ---            |  ---   |  ---     | ---
 `key`          | string | required | unique identifier for this field.  
 `hints`        | object | required | Hints allow views to intelligently select relevant attributes for display, and are required for most views to function.  See section on "Value Hints" below.
-`name`         | string | optional | a human readable label for this field.  If omitted, defaults to `key`.
+`name`         | string | optional | a human readible label for this field.  If omitted, defaults to `key`.
 `source`       | string | optional | identifies the property of a datum where this value is stored.  If omitted, defaults to `key`.
 `format`       | string | optional | a specific format identifier, mapping to a formatter.  If omitted, uses a default formatter.  For enumerations, use `enum`.  For timestamps, use `utc` if you are using utc dates, otherwise use a key mapping to your custom date format.  
 `units`        | string | optional | the units of this value, e.g. `km`, `seconds`, `parsecs`
@@ -423,14 +366,13 @@ attribute      | type   | flags    | notes
 
 ###### Value Hints
 
-Each telemetry value description has an object defining hints.  Keys in this object represent the hint itself, and the value represents the weight of that hint.  A lower weight means the hint has a higher priority.  For example, multiple values could be hinted for use as the y-axis of a plot (raw, engineering), but the highest priority would be the default choice.  Likewise, a table will use hints to determine the default order of columns.
+Each telemetry value description has an object defining hints.  Keys in this this object represent the hint itself, and the value represents the weight of that hint.  A lower weight means the hint has a higher priority.  For example, multiple values could be hinted for use as the y axis of a plot (raw, engineering), but the highest priority would be the default choice.  Likewise, a table will use hints to determine the default order of columns.
 
 Known hints:
 
-* `domain`: Values with a `domain` hint will be used for the x-axis of a plot, and tables will render columns for these values first.
-* `range`: Values with a `range` hint will be used as the y-axis on a plot, and tables will render columns for these values after the `domain` values.
+* `domain`: Indicates that the value represents the "input" of a datum. Values with a `domain` hint will be used for the x-axis of a plot, and tables will render columns for these values first.
+* `range`: Indicates that the value is the "output" of a datum.  Values with a `range` hint will be used as the y-axis on a plot, and tables will render columns for these values after the `domain` values.
 * `image`: Indicates that the value may be interpreted as the URL to an image file, in which case appropriate views will be made available.
-* `imageDownloadName`: Indicates that the value may be interpreted as the name of the image file.
 
 ##### The Time Conductor and Telemetry 
 
@@ -441,18 +383,14 @@ In order for the time conductor to work, there will always be an active "time sy
 
 #### Telemetry Providers
 
-Telemetry providers are responsible for providing historical and real-time telemetry data for telemetry objects.  Each telemetry provider determines which objects it can provide telemetry for, and then must implement methods to provide telemetry for those objects.
+Telemetry providers are responsible for providing historical and real time telemetry data for telemetry objects.  Each telemetry provider determines which objects it can provide telemetry for, and then must implement methods to provide telemetry for those objects.
 
 A telemetry provider is a javascript object with up to four methods:
 
 * `supportsSubscribe(domainObject, callback, options)` optional.  Must be implemented to provide realtime telemetry.  Should return `true` if the provider supports subscriptions for the given domain object (and request options).
 * `subscribe(domainObject, callback, options)` required if `supportsSubscribe` is implemented.  Establish a subscription for realtime data for the given domain object.  Should invoke `callback` with a single telemetry datum every time data is received.  Must return an unsubscribe function.  Multiple views can subscribe to the same telemetry object, so it should always return a new unsubscribe function.
 * `supportsRequest(domainObject, options)` optional.  Must be implemented to provide historical telemetry.  Should return `true` if the provider supports historical requests for the given domain object.
-* `request(domainObject, options)` required if `supportsRequest` is implemented.  Must return a promise for an array of telemetry datums that fulfills the request.  The `options` argument will include a `start`, `end`, and `domain` attribute representing the query bounds.  See [Telemetry Requests and Responses](#telemetry-requests-and-responses) for more info on how to respond to requests.
-* `supportsMetadata(domainObject)` optional.  Implement and return `true` for objects that you want to provide dynamic metadata for.
-* `getMetadata(domainObject)` required if `supportsMetadata` is implemented.  Must return a valid telemetry metadata definition that includes at least one valueMetadata definition.
-* `supportsLimits(domainObject)` optional.  Implement and return `true` for domain objects that you want to provide a limit evaluator for.
-* `getLimitEvaluator(domainObject)` required if `supportsLimits` is implemented.  Must return a valid LimitEvaluator for a given domain object.
+* `request(domainObject, options)` required if `supportsRequest` is implemented.  Must return a promise for an array of telemetry datums that fulfills the request.  The `options` argument will include a `start`, `end`, and `domain` attribute representing the query bounds.  For more request properties, see Request Properties below.
 
 Telemetry providers are registered by calling `openmct.telemetry.addProvider(provider)`, e.g.
 
@@ -460,15 +398,14 @@ Telemetry providers are registered by calling `openmct.telemetry.addProvider(pro
 openmct.telemetry.addProvider({
     supportsRequest: function (domainObject, options) { /*...*/ },
     request: function (domainObject, options) { /*...*/ },
+    supportsSubscribe: function (domainObject, callback, options) { /*...*/ },
+    subscribe: function (domainObject, callback, options) { /*...*/ }
 })
 ```
 
-Note: it is not required to implement all of the methods on every provider.  Depending on the complexity of your implementation, it may be helpful to instantiate and register your realtime, historical, and metadata providers separately.
-
-#### Telemetry Requests and Responses.
+#### Telemetry Requests
 
 Telemetry requests support time bounded queries. A call to a _Telemetry Provider_'s `request` function will include an `options` argument. These are simply javascript objects with attributes for the request parameters. An example of a telemetry request object with a start and end time is included below:
-
 ```javascript
 {
     start: 1487981997240,
@@ -477,55 +414,7 @@ Telemetry requests support time bounded queries. A call to a _Telemetry Provider
 }
 ```
 
-In this case, the `domain` is the currently selected time-system, and the start and end dates are valid dates in that time system.
-
-A telemetry provider's `request` method should return a promise for an array of telemetry datums.  These datums must be sorted by `domain` in ascending order.
-
-The telemetry provider's `request` method will also return an object `signal` with an `aborted` property with a value `true` if the request has been aborted by user navigation. This can be used to trigger actions when a request has been aborted.
-
-#### Request Strategies **draft**
-
-To improve performance views may request a certain strategy for data reduction.  These are intended to improve visualization performance by reducing the amount of data needed to be sent to the client.  These strategies will be indicated by additional parameters in the request options.  You may choose to handle them or ignore them.  
-
-Note: these strategies are currently being tested in core plugins and may change based on developer feedback.
-
-##### `latest` request strategy
-
-This request is a "depth based" strategy.  When a view is only capable of
-displaying a single value (or perhaps the last ten values), then it can
-use the `latest` request strategy with a `size` parameter that specifies
-the number of results it desires.  The `size` parameter is a hint; views
-must not assume the response will have the exact number of results requested.
-
-example:
-```javascript
-{
-    start: 1487981997240,
-    end: 1487982897240,
-    domain: 'utc',
-    strategy: 'latest',
-    size: 1
-}
-```
-
-This strategy says "I want the latest data point in this time range".  A provider which recognizes this request should return only one value-- the latest-- in the requested time range.  Depending on your back-end implementation, performing these queries in bulk can be a large performance increase.  These are generally issued by views that are only capable of displaying a single value and only need to show the latest value.
-
-##### `minmax` request strategy
-
-example:
-```javascript
-{
-    start: 1487981997240,
-    end: 1487982897240,
-    domain: 'utc',
-    strategy: 'minmax',
-    size: 720
-}
-```
-
-MinMax queries are issued by plots, and may be issued by other types as well.  The aim is to reduce the amount of data returned but still faithfully represent the full extent of the data.  In order to do this, the view calculates the maximum data resolution it can display (i.e. the number of horizontal pixels in a plot) and sends that as the `size`.  The response should include at least one minimum and one maximum value per point of resolution.
-
-#### Telemetry Formats **draft**
+#### Telemetry Formats
 
 Telemetry format objects define how to interpret and display telemetry data. 
 They have a simple structure:
@@ -595,25 +484,6 @@ The key-value pairs of this object are described by the telemetry metadata of
 a domain object, as discussed in the [Telemetry Metadata](#telemetry-metadata)
 section.
 
-#### Limit Evaluators **draft**
-
-Limit evaluators allow a telemetry integrator to define which limits exist for a 
-telemetry endpoint and how limits should be applied to telemetry from a given domain object.
-
-A limit evaluator can implement the `evalute` method which is used to define how limits
-should be applied to telemetry and the `getLimits` method which is used to specify 
-what the limit values are for different limit levels.
-
-Limit levels can be mapped to one of 5 colors for visualization: 
-`purple`, `red`, `orange`, `yellow` and `cyan`.
-
-For an example of a limit evaluator, take a look at `examples/generator/SinewaveLimitProvider.js`.
-
-### Telemetry Consumer APIs **draft**
-
-The APIs for requesting telemetry from Open MCT -- e.g. for use in custom views -- are currently in draft state and are being revised.  If you'd like to experiment with them before they are finalized, please contact the team via the contact-us link on our website.
-
-
 ## Time API
 
 Open MCT provides API for managing the temporal state of the application.
@@ -697,7 +567,7 @@ openmct.time.timeSystem(utcTimeSystem, bounds);
 Setting the active time system will trigger a [`'timeSystem'`](#time-events) 
 event.  If you supplied bounds, a [`'bounds'`](#time-events) event will be triggered afterwards with your newly supplied bounds.
 
-#### Time Bounds
+### Time Bounds
 
 The TimeAPI provides a getter/setter for querying and setting time bounds. Time 
 bounds are simply an object with a `start` and an end `end` attribute.
@@ -721,7 +591,7 @@ openmct.time.bounds({start: now - ONE_HOUR, now);
 To respond to bounds change events, listen for the [`'bounds'`](#time-events)
 event.
 
-### Clocks
+## Clocks
 
 The Time API can be set to follow a clock source which will cause the bounds
 to be updated automatically whenever the clock source "ticks". A clock is simply
@@ -740,7 +610,7 @@ be defined to tick on some remote timing source.
 The values provided by clocks are simple `number`s, which are interpreted in the
 context of the active [Time System](#defining-and-registering-time-systems).
 
-#### Defining and registering clocks
+### Defining and registering clocks
 
 A clock is an object that defines certain required metadata and functions:
 
@@ -854,7 +724,7 @@ __Note:__ Setting the clock offsets will trigger an immediate bounds change, as
 new bounds will be calculated based on the `currentValue()` of the active clock. 
 Clock offsets are only relevant when a clock source is active.
 
-### Time Events
+## Time Events
 
 The Time API is a standard event emitter; you can register callbacks for events using the `on` method and remove callbacks for events with the `off` method.
 
@@ -896,7 +766,7 @@ The events emitted by the Time API are:
   * `clockOffsets`: The new [clock offsets](#clock-offsets).
 
 
-### The Time Conductor
+## The Time Conductor
 
 The Time Conductor provides a user interface for managing time bounds in Open 
 MCT. It allows a user to select from configured time systems and clocks, and to set bounds and clock offsets.
@@ -986,68 +856,58 @@ openmct.install(openmct.plugins.Conductor({
 }));
 ```
 
-## Indicators
+## Included Plugins
 
-Indicators are small widgets that reside at the bottom of the screen and are visible from 
-every screen in Open MCT. They can be used to convey system state using an icon and text.
-Typically an indicator will display an icon (customizable with a CSS class) that will 
-reveal additional information when the mouse cursor is hovered over it.
+Open MCT is packaged along with a few general-purpose plugins:
 
-### The URL Status Indicator
+* `openmct.plugins.Conductor` provides a user interface for working with time
+within the application. If activated, configuration must be provided. This is 
+detailed in the section on [Time Conductor Configuration](#time-conductor-configuration).
+* `openmct.plugins.CouchDB` is an adapter for using CouchDB for persistence
+  of user-created objects. This is a constructor that takes the URL for the
+  CouchDB database as a parameter, e.g.
+```javascript
+openmct.install(openmct.plugins.CouchDB('http://localhost:5984/openmct'))
+```
+* `openmct.plugins.Elasticsearch` is an adapter for using Elasticsearch for
+  persistence of user-created objects. This is a
+  constructor that takes the URL for the Elasticsearch instance as a
+  parameter. eg.
+```javascript
+openmct.install(openmct.plugins.CouchDB('http://localhost:9200'))
+```
+* `openmct.plugins.Espresso` and `openmct.plugins.Snow` are two different
+  themes (dark and light) available for Open MCT. Note that at least one
+  of these themes must be installed for Open MCT to appear correctly.
+* `openmct.plugins.URLIndicatorPlugin` adds an indicator which shows the
+availability of a URL with the following options: 
+  - `url` : URL to indicate the status of
+  - `cssClass`: Icon to show in the status bar, defaults to `icon-database`, [list of all icons](https://nasa.github.io/openmct/style-guide/#/browse/styleguide:home?view=items)
+  - `interval`: Interval between checking the connection, defaults to `10000`
+  - `label` Name showing up as text in the status bar, defaults to url
+```javascript
+openmct.install(openmct.plugins.URLIndicatorPlugin({
+  url: 'http://google.com',
+  cssClass: 'check',
+  interval: 10000,
+  label: 'Google'
+ })
+);
+```
+* `openmct.plugins.LocalStorage` provides persistence of user-created
+  objects in browser-local storage. This is particularly useful in
+  development environments.
+* `openmct.plugins.MyItems` adds a top-level folder named "My Items"
+  when the application is first started, providing a place for a
+  user to store created items.
+* `openmct.plugins.UTCTimeSystem` provides a default time system for Open MCT.
 
-A common use case for indicators is to convey the state of some external system such as a 
-persistence backend or HTTP server. So long as this system is accessible via HTTP request, 
-Open MCT provides a general purpose indicator to show whether the server is available and 
-returning a 2xx status code. The URL Status Indicator is made available as a default plugin. See
-the [documentation](./src/plugins/URLIndicatorPlugin) for details on how to install and configure the 
-URL Status Indicator.
-
-### Creating a Simple Indicator
-
-A simple indicator with an icon and some text can be created and added with minimal code. An indicator 
-of this type exposes functions for customizing the text, icon, and style of the indicator.
+Generally, you will want to either install these plugins, or install
+different plugins that provide persistence and an initial folder
+hierarchy.
 
 eg.
-``` javascript
-var myIndicator = openmct.indicators.simpleIndicator();
-myIndicator.text("Hello World!");
-openmct.indicators.add(myIndicator);
-```
-
-This will create a new indicator and add it to the bottom of the screen in Open MCT.
-By default, the indicator will appear as an information icon. Hovering over the icon will
-reveal the text set via the call to `.text()`. The Indicator object returned by the API 
-call exposes a number of functions for customizing the content and appearance of the indicator:
-
-* `.text([text])`: Gets or sets the text shown when the user hovers over the indicator.
-Accepts an __optional__ `string` argument that, if provided, will be used to set the text. 
-Hovering over the indicator will expand it to its full size, revealing this text alongside 
-the icon. Returns the currently set text as a `string`.
-* `.description([description])`: Gets or sets the indicator's description. Accepts an 
-__optional__ `string` argument that, if provided, will be used to set the text. The description 
-allows for more detail to be provided in a tooltip when the user hovers over the indicator. 
-Returns the currently set text as a `string`.
-* `.iconClass([className])`: Gets or sets the CSS class used to define the icon. Accepts an __optional__ 
-`string` parameter to be used to set the class applied to the indicator. Any of 
-[the built-in glyphs](https://nasa.github.io/openmct/style-guide/#/browse/styleguide:home/glyphs?view=styleguide.glyphs) 
-may be used here, or a custom CSS class can be provided. Returns the currently defined CSS 
-class as a `string`.
-* `.statusClass([className])`: Gets or sets the CSS class used to determine status. Accepts an __optional __
-`string` parameter to be used to set a status class applied to the indicator. May be used to apply 
-different colors to indicate status.
-
-### Custom Indicators
-
-A completely custom indicator can be added by simply providing a DOM element to place alongside other indicators.
-
-``` javascript
-    var domNode = document.createElement('div');
-    domNode.innerText = new Date().toString();
-    setInterval(function () {
-        domNode.innerText = new Date().toString();
-    }, 1000);
-
-    openmct.indicators.add({
-        element: domNode
-    });
+```javascript
+openmct.install(openmct.plugins.LocalStorage());
+openmct.install(openmct.plugins.MyItems());
 ```

CONTRIBUTING.md

@@ -10,7 +10,7 @@ accept changes from external contributors.
 
 The short version:
 
-1. Write your contribution or describe your idea in the form of an [GitHub issue](https://github.com/nasa/openmct/issues/new/choose) or [Starting a GitHub Discussion](https://github.com/nasa/openmct/discussions)
+1. Write your contribution.
 2. Make sure your contribution meets code, test, and commit message
    standards as described below.
 3. Submit a pull request from a topic branch back to `master`. Include a check
@@ -18,7 +18,6 @@ The short version:
    for review.)
 4. Respond to any discussion. When the reviewer decides it's ready, they
    will merge back `master` and fill out their own check list.
-5. If you are a first-time contributor, please see [this discussion](https://github.com/nasa/openmct/discussions/3821) for further information.   
 
 ## Contribution Process
 
@@ -104,7 +103,7 @@ the name chosen could not be mistaken for a topic or master branch.
 ### Merging
 
 When development is complete on an issue, the first step toward merging it
-back into the master branch is to file a Pull Request (PR). The contributions
+back into the master branch is to file a Pull Request. The contributions
 should meet code, test, and commit message standards as described below,
 and the pull request should include a completed author checklist, also
 as described below. Pull requests may be assigned to specific team
@@ -115,15 +114,6 @@ request. When the reviewer is satisfied, they should add a comment to
 the pull request containing the reviewer checklist (from below) and complete
 the merge back to the master branch.
 
-Additionally:
-* Every pull request must link to the issue that it addresses. Eg. “Addresses #1234” or “Closes #1234”. This is the responsibility of the pull request’s __author__. If no issue exists, [create one](https://github.com/nasa/openmct/issues/new/choose).
-* Every __author__ must include testing instructions. These instructions should identify the areas of code affected, and some minimal test steps. If addressing a bug, reproduction steps should be included, if they were not included in the original issue. If reproduction steps were included on the original issue, and are sufficient, refer to them.
-* A pull request that closes an issue should say so in the description. Including the text “Closes #1234” will cause the linked issue to be automatically closed when the pull request is merged. This is the responsibility of the pull request’s __author__.
-* When a pull request is merged, and the corresponding issue closed, the __reviewer__ must add the tag “unverified” to the original issue. This will indicate that although the issue is closed, it has not been tested yet.
-* Every PR must have two reviewers assigned, though only one approval is necessary for merge.
-* Changes to API require approval by a senior developer.
-* When creating a PR, it is the author's responsibility to apply any priority label from the issue to the PR as well. This helps with prioritization.
-
 ## Standards
 
 Contributions to Open MCT are expected to meet the following standards.
@@ -132,104 +122,97 @@ changes.
 
 ### Code Standards
 
-JavaScript sources in Open MCT must satisfy the ESLint rules defined in 
-this repository. This is verified by the command line build.
+JavaScript sources in Open MCT must satisfy JSLint under its default
+settings. This is verified by the command line build.
 
 #### Code Guidelines
 
-The following guidelines are provided for anyone contributing source code to the Open MCT project:
+JavaScript sources in Open MCT should:
+
+* Use four spaces for indentation. Tabs should not be used.
+* Include JSDoc for any exposed API (e.g. public methods, constructors).
+* Include non-JSDoc comments as-needed for explaining private variables,
+  methods, or algorithms when they are non-obvious.
+* Define one public class per script, expressed as a constructor function
+  returned from an AMD-style module.
+* Follow “Java-like” naming conventions. These includes:
+  * Classes should use camel case, first letter capitalized
+    (e.g. SomeClassName).
+  * Methods, variables, fields, and function names should use camel case,
+    first letter lower-case (e.g. someVariableName).
+  * Constants (variables or fields which are meant to be declared and 
+    initialized statically, and never changed) should use only capital 
+    letters, with underscores between words (e.g. SOME_CONSTANT).
+  * File names should be the name of the exported class, plus a .js extension
+    (e.g. SomeClassName.js).
+* Avoid anonymous functions, except when functions are short (a few lines)
+  and/or their inclusion makes sense within the flow of the code
+  (e.g. as arguments to a forEach call).
+* Avoid deep nesting (especially of functions), except where necessary
+  (e.g. due to closure scope).
+* End with a single new-line character.
+* Expose public methods by declaring them on the class's prototype.
+* Within a given function's scope, do not mix declarations and imperative
+  code, and  present these in the following order:
+  * First, variable declarations and initialization.
+  * Second, function declarations.
+  * Third, imperative statements.
+  * Finally, the returned value.
 
-1. Write clean code. Here’s a good summary - https://github.com/ryanmcdermott/clean-code-javascript.
-1. Include JSDoc for any exposed API (e.g. public methods, classes).
-1. Include non-JSDoc comments as-needed for explaining private variables,
-   methods, or algorithms when they are non-obvious. Otherwise code 
-   should be self-documenting.
-1. Classes and Vue components should use camel case, first letter capitalized
-   (e.g. SomeClassName).
-1. Methods, variables, fields, events, and function names should use camelCase,
-   first letter lower-case (e.g. someVariableName).
-1. Source files that export functions should use camelCase, first letter lower-case (eg. testTools.js)
-1. Constants (variables or fields which are meant to be declared and 
-   initialized statically, and never changed) should use only capital 
-   letters, with underscores between words (e.g. SOME_CONSTANT). They should always be declared as `const`s
-1. File names should be the name of the exported class, plus a .js extension
-   (e.g. SomeClassName.js).
-1. Avoid anonymous functions, except when functions are short (one or two lines)
-   and their inclusion makes sense within the flow of the code
-   (e.g. as arguments to a forEach call). Anonymous functions should always be arrow functions.
-1. Named functions are preferred over functions assigned to variables.
-   eg.
-   ```JavaScript
-   function renameObject(object, newName) {
-       Object.name = newName;
-   }
-   ```
-   is preferable to
-   ```JavaScript
-   const rename = (object, newName) => {
-       Object.name = newName;
-   }
-   ```
-1. Avoid deep nesting (especially of functions), except where necessary
-   (e.g. due to closure scope).
-1. End with a single new-line character.
-1. Always use ES6 `Class`es and inheritence rather than the pre-ES6 prototypal 
-   pattern.
-1. Within a given function's scope, do not mix declarations and imperative
-   code, and  present these in the following order:
-   * First, variable declarations and initialization.
-   * Secondly, imperative statements.
-   * Finally, the returned value. A single return statement at the end of the function should be used, except where an early return would improve code clarity.
-1. Avoid the use of "magic" values.
-   eg.
-   ```JavaScript
-   const UNAUTHORIZED = 401;
-   if (responseCode === UNAUTHORIZED)
-   ```
-   is preferable to
-   ```JavaScript
-   if (responseCode === 401)
-   ```
-1. Use the ternary operator only for simple cases such as variable assignment. Nested ternaries should be avoided in all cases.
-1. Test specs should reside alongside the source code they test, not in a separate directory.
-1. Organize code by feature, not by type.
-   eg.
-   ```
-   - telemetryTable
-       - row
-           TableRow.js
-           TableRowCollection.js
-           TableRow.vue
-       - column
-           TableColumn.js
-           TableColumn.vue
-       plugin.js
-       pluginSpec.js
-   ```
-   is preferable to
-   ```
-   - telemetryTable
-       - components
-           TableRow.vue
-           TableColumn.vue
-       - collections
-           TableRowCollection.js
-       TableColumn.js
-       TableRow.js
-       plugin.js
-       pluginSpec.js
-   ```
 Deviations from Open MCT code style guidelines require two-party agreement,
 typically from the author of the change and its reviewer.
 
+#### Code Example
+
+```js
+/*global define*/
+
+/**
+ * Bundles should declare themselves as namespaces in whichever source
+ * file is most like the "main point of entry" to the bundle.
+ * @namespace some/bundle
+ */
+define(
+    ['./OtherClass'],
+    function (OtherClass) {
+        "use strict";
+
+        /**
+         * A summary of how to use this class goes here.
+         *
+         * @constructor
+         * @memberof some/bundle
+         */
+        function ExampleClass() {
+        }
+
+        // Methods which are not intended for external use should
+        // not have JSDoc (or should be marked @private)
+        ExampleClass.prototype.privateMethod = function () {
+        };
+
+        /**
+         * A summary of this method goes here.
+         * @param {number} n a parameter
+         * @returns {number} a return value
+         */
+        ExampleClass.prototype.publicMethod = function (n) {
+            return n * 2;
+        }
+
+        return ExampleClass;
+    }
+);
+```
+
 ### Test Standards
 
 Automated testing shall occur whenever changes are merged into the main
 development branch and must be confirmed alongside any pull request.
 
-Automated tests are tests which exercise plugins, API, and utility classes. 
-Tests are subject to code review along with the actual implementation, to 
-ensure that tests are applicable and useful.
+Automated tests are typically unit tests which exercise individual software
+components. Tests are subject to code review along with the actual
+implementation, to ensure that tests are applicable and useful.
 
 Examples of useful tests:
 * Tests which replicate bugs (or their root causes) to verify their
@@ -239,26 +222,8 @@ Examples of useful tests:
 * Tests which verify expected interactions with other components in the
   system.
 
-#### Guidelines
-* 100% statement coverage is achievable and desirable.
-* Do blackbox testing. Test external behaviors, not internal details. Write tests that describe what your plugin is supposed to do. How it does this doesn't matter, so don't test it.
-* Unit test specs for plugins should be defined at the plugin level. Start with one test spec per plugin named pluginSpec.js, and as this test spec grows too big, break it up into multiple test specs that logically group related tests.
-* Unit tests for API or for utility functions and classes may be defined at a per-source file level.
-* Wherever possible only use and mock public API, builtin functions, and UI in your test specs. Do not directly invoke any private functions. ie. only call or mock functions and objects exposed by openmct.* (eg. openmct.telemetry, openmct.objectView, etc.), and builtin browser functions (fetch, requestAnimationFrame, setTimeout, etc.).
-* Where builtin functions have been mocked, be sure to clear them between tests.
-* Test at an appropriate level of isolation. Eg. 
-    * If you’re testing a view, you do not need to test the whole application UI, you can just fetch the view provider using the public API and render the view into an element that you have created. 
-    * You do not need to test that the view switcher works, there should be separate tests for that. 
-    * You do not need to test that telemetry providers work, you can mock openmct.telemetry.request() to feed test data to the view.
-    * Use your best judgement when deciding on appropriate scope.
-* Automated tests for plugins should start by actually installing the plugin being tested, and then test that installing the plugin adds the desired features and behavior to Open MCT, observing the above rules.
-* All variables used in a test spec, including any instances of the Open MCT API should be declared inside of an appropriate block scope (not at the root level of the source file), and should be initialized in the relevant beforeEach block. `beforeEach` is preferable to `beforeAll` to avoid leaking of state between tests.
-* A `afterEach` or `afterAll` should be used to do any clean up necessary to prevent leakage of state between test specs. This can happen when functions on `window` are wrapped, or when the URL is changed. [A convenience function](https://github.com/nasa/openmct/blob/master/src/utils/testing.js#L59) is provided for resetting the URL and clearing builtin spies between tests.
-* If writing unit tests for legacy Angular code be sure to follow [best practices in order to avoid memory leaks](https://www.thecodecampus.de/blog/avoid-memory-leaks-angularjs-unit-tests/).
-
-#### Examples
-* [Example of an automated test spec for an object view plugin](https://github.com/nasa/openmct/blob/master/src/plugins/telemetryTable/pluginSpec.js)
-* [Example of an automated test spec for API](https://github.com/nasa/openmct/blob/master/src/api/time/TimeAPISpec.js)
+During automated testing, code coverage metrics will be reported. Line
+coverage must remain at or above 80%.
 
 ### Commit Message Standards
 
@@ -297,12 +262,23 @@ these standards.
 
 Issues are tracked at https://github.com/nasa/openmct/issues.
 
+Issues should include:
+
+* A short description of the issue encountered.
+* A longer-form description of the issue encountered. When possible, steps to
+  reproduce the issue.
+* When possible, a description of the impact of the issue. What use case does
+  it impede?
+* An assessment of the severity of the issue.
+
 Issue severity is categorized as follows (in ascending order):
 
-* _Trivial_: Minimal impact on the usefulness and functionality of the software; a "nice-to-have." Visual impact without functional impact,
-* _Medium_: Some impairment of use, but simple workarounds exist
-* _Critical_: Significant loss of functionality or impairment of use. Display of telemetry data is not affected though.
-* _Blocker_: Major functionality is impaired or lost, threatening mission success. Display of telemetry data is impaired or blocked by the bug, which could lead to loss of situational awareness.
+* _Trivial_: Minimal impact on the usefulness and functionality of the
+  software; a "nice-to-have."
+* _(Unspecified)_: Major loss of functionality or impairment of use.
+* _Critical_: Large-scale loss of functionality or impairment of use,
+  such that remaining utility becomes marginal.
+* _Blocker_: Harmful or otherwise unacceptable behavior. Must fix.
 
 ## Check Lists
 
@@ -312,20 +288,14 @@ checklist).
 
 ### Author Checklist
 
-[Within PR Template](.github/PULL_REQUEST_TEMPLATE.md)
+1. Changes address original issue?
+2. Unit tests included and/or updated with changes?
+3. Command line build passes?
+4. Changes have been smoke-tested?
 
 ### Reviewer Checklist
 
-* [ ] Changes appear to address issue?
-* [ ] Changes appear not to be breaking changes?
-* [ ] Appropriate unit tests included?
-* [ ] Code style and in-line documentation are appropriate?
-* [ ] Commit messages meet standards?
-* [ ] Has associated issue been labelled `unverified`? (only applicable if this PR closes the issue)
-* [ ] Has associated issue been labelled `bug`? (only applicable if this PR is for a bug fix)
-* [ ] List of Acceptance Tests Performed.
-
-Write out a small list of tests performed with just enough detail for another developer on the team 
-to execute. 
-
-i.e. ```When Clicking on Add button, new `object` appears in dropdown.```
+1. Changes appear to address issue?
+2. Appropriate unit tests included?
+3. Code style and in-line documentation are appropriate?
+4. Commit messages meet standards?

LICENSE.md

@@ -1,7 +0,0 @@
-# Open MCT License
-
-Open MCT, Copyright (c) 2014-2021, United States Government as represented by the Administrator of the National Aeronautics and Space Administration. All rights reserved.
-
-Open MCT is licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.  You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0.
-
-Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

LICENSES.md

@@ -0,0 +1,691 @@
+# Open MCT Licenses
+
+Open MCT, Copyright (c) 2014-2017, United States Government as represented by the Administrator of the National Aeronautics and Space Administration. All rights reserved.
+
+Open MCT is licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.  You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0.
+
+Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
+
+Open MCT includes source code licensed under additional open source licenses as follows.
+
+## Software Components Licenses
+
+This software includes components released under the following licenses:
+
+---
+
+### SuperSocket
+
+#### Info
+
+* Link: https://supersocket.codeplex.com/
+
+* Version: 0.9.0.2
+
+* Author: Kerry Jiang
+
+* Description: Supports SuperWebSocket
+
+#### License
+
+Copyright 2012 Kerry Jiang (kerry-jiang@hotmail.com)
+
+SuperSocket is licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.  You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0.
+
+Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
+
+---
+
+### SuperWebSocket
+
+#### Info
+
+* Link: https://superswebocket.codeplex.com/
+
+* Version: 0.9.0.2
+
+* Author: Kerry Jiang
+
+* Description: WebSocket implementation for client-server communication
+
+#### License
+
+Copyright 2010-2013 Kerry Jiang (kerry-jiang@hotmail.com)
+
+SuperWebSocket is licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.  You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0.
+
+Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
+
+
+---
+
+### log4net
+
+#### Info
+
+* Link: http://logging.apache.org/log4net/
+
+* Version: 1.2.13
+
+* Author: Apache Software Foundation
+
+* Description: Logging.
+
+#### License
+
+Copyright © 2004-2015 Apache Software Foundation.
+
+log4net is licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.  You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0.
+
+Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
+
+---
+
+### Blanket.js
+
+#### Info
+
+* Link: http://blanketjs.org/
+
+* Version: 1.1.5
+
+* Author: Alex Seville
+
+* Description: Code coverage measurement and reporting
+
+#### License
+
+Copyright (c) 2013 Alex Seville
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Jasmine
+
+#### Info
+
+* Link: http://jasmine.github.io/
+
+* Version: 1.3.1
+
+* Author: Pivotal Labs
+
+* Description: Unit testing
+
+#### License
+
+Copyright (c) 2008-2011 Pivotal Labs
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### RequireJS
+
+#### Info
+
+* Link: http://requirejs.org/
+
+* Version: 2.1.22
+
+* Author: The Dojo Foundation
+
+* Description: Script loader
+
+#### License
+
+Copyright (c) 2010-2015, The Dojo Foundation
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### requirejs-text
+
+#### Info
+
+* Link: https://github.com/requirejs/text
+
+* Version: 2.0.14
+
+* Author: The Dojo Foundation
+
+* Description: Text loading plugin for RequireJS
+
+#### License
+
+Copyright (c) 2010-2014, The Dojo Foundation
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+---
+
+### AngularJS
+
+#### Info
+
+* Link: http://angularjs.org/
+
+* Version: 1.4.4
+
+* Author: Google
+
+* Description: Client-side web application framework
+
+#### License
+
+Copyright (c) 2010-2015 Google, Inc. http://angularjs.org
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Angular-Route
+
+#### Info
+
+* Link: http://angularjs.org/
+
+* Version: 1.4.4
+
+* Author: Google
+
+* Description: Client-side view routing
+
+#### License
+
+Copyright (c) 2010-2015 Google, Inc. http://angularjs.org
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### ES6-Promise
+
+#### Info
+
+* Link: https://github.com/jakearchibald/es6-promise
+
+* Version: 3.0.2
+
+* Authors: Yehuda Katz, Tom Dale, Stefan Penner and contributors
+
+* Description: Promise polyfill for pre-ECMAScript 6 browsers
+
+#### License
+
+Copyright (c) 2014 Yehuda Katz, Tom Dale, Stefan Penner and contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### screenfull.js
+
+#### Info
+
+* Link: https://github.com/sindresorhus/screenfull.js/
+
+* Version: 3.0.0
+
+* Author: Sindre Sorhus
+
+* Description: Wrapper for cross-browser usage of fullscreen API
+
+#### License
+
+Copyright (c) Sindre Sorhus <sindresorhus@gmail.com> (sindresorhus.com)
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Math.uuid.js
+
+#### Info
+
+* Link: https://github.com/broofa/node-uuid
+
+* Version: 1.4.7
+
+* Author: Robert Kieffer
+
+* Description: Unique identifer generation.
+
+#### License
+
+Copyright (c) 2010-2012 Robert Kieffer
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Normalize.css
+
+#### Info
+
+* Link: https://github.com/necolas/normalize.css
+
+* Version: 1.1.2
+
+* Authors: Nicolas Gallagher, Jonathan Neal
+
+* Description: Browser style normalization
+
+#### License
+
+Copyright (c) Nicolas Gallagher and Jonathan Neal
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Moment.js
+
+#### Info
+
+* Link: http://momentjs.com
+
+* Version: 2.11.1
+
+* Authors: Tim Wood, Iskren Chernev, Moment.js contributors
+
+* Description: Time/date parsing/formatting
+
+#### License
+
+Copyright (c) 2011-2014 Tim Wood, Iskren Chernev, Moment.js contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### moment-duration-format
+
+#### Info
+
+* Link: https://github.com/jsmreese/moment-duration-format
+
+* Version: 1.3.0
+
+* Authors: John Madhavan-Reese
+
+* Description: Duration parsing/formatting
+
+#### License
+
+Copyright 2014 John Madhavan-Reese
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software is furnished to do so,
+subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### CSV.js
+
+#### Info
+
+* Link: https://github.com/knrz/CSV.js
+
+* Version: 3.6.4
+
+* Authors: Kash Nouroozi
+
+* Description: Encoder for CSV (comma separated values) export
+
+#### License
+
+Copyright (c) 2014 Kash Nouroozi
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+---
+
+### FileSaver.js
+
+#### Info
+
+* Link: https://github.com/eligrey/FileSaver.js/
+
+* Version: 0.0.2
+
+* Authors: Eli Grey
+
+* Description: File download initiator (for file exports)
+
+#### License
+
+Copyright © 2015 Eli Grey.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Zepto
+
+#### Info
+
+* Link: http://zeptojs.com/
+
+* Version: 1.1.6
+
+* Authors: Thomas Fuchs
+
+* Description: DOM manipulation
+
+#### License
+
+Copyright (c) 2010-2016 Thomas Fuchs
+http://zeptojs.com/
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Json.NET
+
+#### Info
+
+* Link: http://www.newtonsoft.com/json
+
+* Version: 6.0.8
+
+* Author: Newtonsoft
+
+* Description: JSON serialization/deserialization
+
+#### License
+
+Copyright (c) 2007 James Newton-King
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Nancy
+
+#### Info
+
+* Link: http://nancyfx.org
+
+* Version: 0.23.2
+
+* Author: Andreas Håkansson, Steven Robbins and contributors
+
+* Description: Embedded web server
+
+#### License
+
+Copyright © 2010 Andreas Håkansson, Steven Robbins and contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Nancy.Hosting.Self
+
+#### Info
+
+* Link: http://nancyfx.org
+
+* Version: 0.23.2
+
+* Author: Andreas Håkansson, Steven Robbins and contributors
+
+* Description: Embedded web server
+
+#### License
+
+Copyright © 2010 Andreas Håkansson, Steven Robbins and contributors
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+---
+
+### Almond
+
+* Link: https://github.com/requirejs/almond
+
+* Version: 0.3.3
+
+* Author: jQuery Foundation
+
+* Description: Lightweight RequireJS replacement for builds
+
+#### License
+
+Copyright jQuery Foundation and other contributors, https://jquery.org/
+
+This software consists of voluntary contributions made by many
+individuals. For exact contribution history, see the revision history
+available at https://github.com/requirejs/almond
+
+The following license applies to all parts of this software except as
+documented below:
+
+====
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+====
+
+Copyright and related rights for sample code are waived via CC0. Sample
+code is defined as all source code displayed within the prose of the
+documentation.
+
+CC0: http://creativecommons.org/publicdomain/zero/1.0/
+
+====
+
+Files located in the node_modules directory, and certain utilities used
+to build or test the software in the test and dist directories, are
+externally maintained libraries used by this software which have their own
+licenses; we recommend you read them, as their terms may differ from the
+terms above.
+
+
+### Lodash
+
+* Link: https://lodash.com
+
+* Version: 3.10.1
+
+* Author: Dojo Foundation
+
+* Description: Utility functions
+
+#### License
+
+Copyright 2012-2015 The Dojo Foundation <http://dojofoundation.org/>
+Based on Underscore.js, copyright 2009-2015 Jeremy Ashkenas,
+DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+### EventEmitter3
+
+* Link: https://github.com/primus/eventemitter3
+
+* Version: 1.2.0
+
+* Author: Arnout Kazemier
+
+* Description: Event-driven programming support
+
+#### License
+
+The MIT License (MIT)
+
+Copyright (c) 2014 Arnout Kazemier
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

README.md

@@ -1,16 +1,34 @@
-# Open MCT [![license](https://img.shields.io/badge/license-Apache%202.0-blue.svg)](http://www.apache.org/licenses/LICENSE-2.0) [![Language grade: JavaScript](https://img.shields.io/lgtm/grade/javascript/g/nasa/openmct.svg?logo=lgtm&logoWidth=18)](https://lgtm.com/projects/g/nasa/openmct/context:javascript) [![codecov](https://codecov.io/gh/nasa/openmct/branch/master/graph/badge.svg?token=7DQIipp3ej)](https://codecov.io/gh/nasa/openmct) [![This project is using Percy.io for visual regression testing.](https://percy.io/static/images/percy-badge.svg)](https://percy.io/b2e34b17/openmct)
+# Open MCT [![license](https://img.shields.io/badge/license-Apache%202.0-blue.svg)](http://www.apache.org/licenses/LICENSE-2.0)
 
 Open MCT (Open Mission Control Technologies) is a next-generation mission control framework for visualization of data on desktop and mobile devices. It is developed at NASA's Ames Research Center, and is being used by NASA for data analysis of spacecraft missions, as well as planning and operation of experimental rover systems. As a generalizable and open source framework, Open MCT could be used as the basis for building applications for planning, operation, and analysis of any systems producing telemetry data.
 
 Please visit our [Official Site](https://nasa.github.io/openmct/) and [Getting Started Guide](https://nasa.github.io/openmct/getting-started/)
 
-Once you've created something amazing with Open MCT, showcase your work in our GitHub Discussions [Show and Tell](https://github.com/nasa/openmct/discussions/categories/show-and-tell) section. We love seeing unique and wonderful implementations of Open MCT!
-
 ## See Open MCT in Action
 
 Try Open MCT now with our [live demo](https://openmct-demo.herokuapp.com/).
 ![Demo](https://nasa.github.io/openmct/static/res/images/Open-MCT.Browse.Layout.Mars-Weather-1.jpg)
 
+## New API
+
+A simpler, [easier-to-use API](https://nasa.github.io/openmct/docs/api/)
+has been added to Open MCT. Changes in this
+API include a move away from a declarative system of JSON configuration files
+towards an imperative system based on function calls. Developers will be able
+to extend and build on Open MCT by making direct function calls to a public
+API. Open MCT is also being refactored to minimize the dependencies that using
+Open MCT imposes on developers, such as the current requirement to use
+AngularJS.
+
+This new API has not yet been heavily used and is likely to contain defects.
+You can help by trying it out, and reporting any issues you encounter
+using our GitHub issue tracker. Such issues may include bugs, suggestions,
+missing documentation, or even just requests for help if you're having
+trouble.
+
+We want Open MCT to be as easy to use, install, run, and develop for as
+possible, and your feedback will help us get there!
+
 ## Building and Running Open MCT Locally
 
 Building and running Open MCT in your local dev environment is very easy. Be sure you have [Git](https://git-scm.com/downloads) and [Node.js](https://nodejs.org/) installed, then follow the directions below. Need additional information? Check out the [Getting Started](https://nasa.github.io/openmct/getting-started/) page on our website.
@@ -30,14 +48,9 @@ Building and running Open MCT in your local dev environment is very easy. Be sur
 
 Open MCT is now running, and can be accessed by pointing a web browser at [http://localhost:8080/](http://localhost:8080/)
 
-## Open MCT v1.0.0
-This represents a major overhaul of Open MCT with significant changes under the hood. We aim to maintain backward compatibility but if you do find compatibility issues, please let us know by filing an issue in this repository. If you are having major issues with v1.0.0 please check-out the v0.14.0 tag until we can resolve them for you.
-
-If you are migrating an application built with Open MCT as a dependency to v1.0.0 from an earlier version, please refer to [our migration guide](https://nasa.github.io/openmct/documentation/migration-guide).
-
 ## Documentation
 
-Documentation is available on the [Open MCT website](https://nasa.github.io/openmct/documentation/).
+Documentation is available on the [Open MCT website](https://nasa.github.io/openmct/documentation/). The documentation can also be built locally.
 
 ### Examples
 
@@ -45,29 +58,68 @@ The clearest examples for developing Open MCT plugins are in the
 [tutorials](https://github.com/nasa/openmct-tutorial) provided in
 our documentation.
 
-We want Open MCT to be as easy to use, install, run, and develop for as
-possible, and your feedback will help us get there! Feedback can be provided via [GitHub issues](https://github.com/nasa/openmct/issues/new/choose), [Starting a GitHub Discussion](https://github.com/nasa/openmct/discussions), or by emailing us at [arc-dl-openmct@mail.nasa.gov](mailto:arc-dl-openmct@mail.nasa.gov).
+For a practical example of a telemetry adapter, see David Hudson's
+[Kerbal Space Program plugin](https://github.com/hudsonfoo/kerbal-openmct),
+which allows [Kerbal Space Program](https://kerbalspaceprogram.com) players
+to build and use displays for their own missions in Open MCT.
 
-## Building Applications With Open MCT
+Additional examples are available in the `examples` hierarchy of this
+repository; however, be aware that these examples are
+[not fully-documented](https://github.com/nasa/openmct/issues/846), so
+the tutorials will likely serve as a better starting point.
 
-Open MCT is built using [`npm`](http://npmjs.com/) and [`webpack`](https://webpack.js.org/).
+### Building the Open MCT Documentation Locally
+Open MCT's documentation is generated by an
+[npm](https://www.npmjs.com/)-based build.  It has additional dependencies that
+may not be available on every platform and thus is not covered in the standard
+npm install.  Ensure your system has [libcairo](http://cairographics.org/)
+installed and then run the following commands:
 
-See our documentation for a guide on [building Applications with Open MCT](https://github.com/nasa/openmct/blob/master/API.md#starting-an-open-mct-application).
+* `npm install`
+* `npm install canvas nomnoml`
+* `npm run docs`
 
-## Plugins
+Documentation will be generated in `target/docs`.
 
-Open MCT can be extended via plugins that make calls to the Open MCT API. A plugin is a group 
-of software components (including source code and resources such as images and HTML templates)
-that is intended to be added or removed as a single unit.
+## Deploying Open MCT
 
-As well as providing an extension mechanism, most of the core Open MCT codebase is also 
-written as plugins.
+Open MCT is built using [`npm`](http://npmjs.com/)
+and [`gulp`](http://gulpjs.com/).
 
-For information on writing plugins, please see [our API documentation](https://github.com/nasa/openmct/blob/master/API.md#plugins).
+To build Open MCT for deployment:
+
+`npm run prepare`
+
+This will compile and minify JavaScript sources, as well as copy over assets.
+The contents of the `dist` folder will contain a runnable Open MCT
+instance (e.g. by starting an HTTP server in that directory), including:
+
+* A `main.js` file containing Open MCT source code.
+* Various assets in the `example` and `platform` directories.
+* An `index.html` that runs Open MCT in its default configuration.
+
+Additional `gulp` tasks are defined in [the gulpfile](gulpfile.js).
+
+## Bundles
+
+A bundle is a group of software components (including source code, declared
+as AMD modules, as well as resources such as images and HTML templates)
+that is intended to be added or removed as a single unit. A plug-in for
+Open MCT will be expressed as a bundle; platform components are also
+expressed as bundles.
+
+A bundle is also just a directory which contains a file `bundle.json`,
+which declares its contents.
+
+The file `bundles.json` (note the plural), at the top level of the
+repository, is a JSON file containing an array of all bundles (expressed as
+directory names) to include in a running instance of Open MCT. Adding or
+removing paths from this list will add or remove bundles from the running
+application.
 
 ## Tests
 
-Tests are written for [Jasmine 3](https://jasmine.github.io/api/3.1/global)
+Tests are written for [Jasmine 1.3](http://jasmine.github.io/1.3/introduction.html)
 and run by [Karma](http://karma-runner.github.io). To run:
 
 `npm test`
@@ -83,9 +135,7 @@ naming convention is otherwise the same.)
 ### Test Reporting
 
 When `npm test` is run, test results will be written as HTML to
-`dist/reports/tests/`. Code coverage information is written to `dist/reports/coverage`.
-
-Code Coverage Reports are available from [codecov.io](https://app.codecov.io/gh/nasa/openmct/)
+`target/tests`. Code coverage information is written to `target/coverage`.
 
 # Glossary
 
@@ -95,8 +145,11 @@ addressed (either by updating this glossary or changing code to reflect
 correct usage.) Other developer documentation, particularly in-line
 documentation, may presume an understanding of these terms.
 
-* _plugin_: A plugin is a removable, reusable grouping of software elements.
-  The application is composed of plugins.
+* _bundle_: A bundle is a removable, reusable grouping of software elements.
+  The application is composed of bundles. Plug-ins are bundles. For more
+  information, refer to framework documentation (under `platform/framework`.)
+* _capability_: An object which exposes dynamic behavior or non-persistent
+  state associated with a domain object.
 * _composition_: In the context of a domain object, this refers to the set of
   other domain objects that compose or are contained by that object. A domain
   object's composition is the set of domain objects that should appear
@@ -111,8 +164,13 @@ documentation, may presume an understanding of these terms.
 * _domain object_: A meaningful object to the user; a distinct thing in
   the work support by Open MCT. Anything that appears in the left-hand
   tree is a domain object.
-* _identifier_: A tuple consisting of a namespace and a key, which together uniquely
-  identifies a domain object.
+* _extension_: An extension is a unit of functionality exposed to the
+  platform in a declarative fashion by a bundle. For more
+  information, refer to framework documentation (under `platform/framework`.)
+* _id_: A string which uniquely identifies a domain object.
+* _key_: When used as an object property, this refers to the machine-readable
+  identifier for a specific thing in a set of things. (Most often used in the
+  context of extensions or other similar application-specific object sets.)
 * _model_: The persistent state associated with a domain object. A domain
   object's model is a JavaScript object which can be converted to JSON
   without losing information (that is, it contains no methods.)
@@ -124,5 +182,7 @@ documentation, may presume an understanding of these terms.
   a user clicks on a domain object in the tree, they are _navigating_ to
   it, and it is thereafter considered the _navigated_ object (until the
   user makes another such choice.)
-* _namespace_: A name used to identify a persistence store. A running open MCT 
-application could potentially use multiple persistence stores, with the 
+* _space_: A name used to identify a persistence store. Interactions with
+  persistence will generally involve a `space` parameter in some form, to
+  distinguish multiple persistence stores from one another (for cases
+  where there are multiple valid persistence locations available.)

SECURITY.md

@@ -1,31 +0,0 @@
-# Security Policy
-
-The Open MCT team secures our code base using a combination of code review, dependency review, and periodic security reviews. Static analysis performed during automated verification additionally safeguards against common coding errors which may result in vulnerabilities.
-
-### Reporting a Vulnerability
-
-For general defects, please for a [Bug Report](https://github.com/nasa/openmct/issues/new/choose)
-
-To report a vulnerability for Open MCT please send a detailed report to [arc-dl-openmct](mailto:arc-dl-openmct@mail.nasa.gov). 
-
-See our [top-level security policy](https://github.com/nasa/openmct/security/policy) for additional information.
-
-### CodeQL and LGTM
-
-The [CodeQL GitHub Actions workflow](https://github.com/nasa/openmct/blob/master/.github/workflows/codeql-analysis.yml) is available to the public. To review the results, fork the repository and run the CodeQL workflow. 
-
-CodeQL is run for every pull-request in GitHub Actions.
-
-The project is also monitored by [LGTM](https://lgtm.com/projects/g/nasa/openmct/) and is available to public.
-
-### ESLint
-
-Static analysis is run for every push on the master branch and every pull request on all branches in Github Actions. 
-
-For more information about ESLint, visit https://eslint.org/.
-
-### General Support
-
-For additional support, please open a [Github Discussion](https://github.com/nasa/openmct/discussions). 
-
-If you wish to report a cybersecurity incident or concern, please contact the NASA Security Operations Center either by phone at 1-877-627-2732 or via email address soc@nasa.gov.

app.js

@@ -7,72 +7,78 @@
  * node app.js [options]
  */
 
+(function () {
+    "use strict";
 
-const options = require('minimist')(process.argv.slice(2));
-const express = require('express');
-const app = express();
-const fs = require('fs');
-const request = require('request');
+    var BUNDLE_FILE = 'bundles.json',
+        options = require('minimist')(process.argv.slice(2)),
+        express = require('express'),
+        app = express(),
+        fs = require('fs'),
+        request = require('request');
 
-// Defaults
-options.port = options.port || options.p || 8080;
-options.host = options.host || 'localhost';
-options.directory = options.directory || options.D || '.';
+    // Defaults
+    options.port = options.port || options.p || 8080;
+    options.directory = options.directory || options.D || '.';
+    ['include', 'exclude', 'i', 'x'].forEach(function (opt) {
+        options[opt] = options[opt] || [];
+        // Make sure includes/excludes always end up as arrays
+        options[opt] = Array.isArray(options[opt]) ?
+                options[opt] : [options[opt]];
+    });
+    options.include = options.include.concat(options.i);
+    options.exclude = options.exclude.concat(options.x);
 
-// Show command line options
-if (options.help || options.h) {
-    console.log("\nUsage: node app.js [options]\n");
-    console.log("Options:");
-    console.log("  --help, -h               Show this message.");
-    console.log("  --port, -p <number>      Specify port.");
-    console.log("  --directory, -D <bundle>   Serve files from specified directory.");
-    console.log("");
-    process.exit(0);
-}
-
-app.disable('x-powered-by');
-
-app.use('/proxyUrl', function proxyRequest(req, res, next) {
-    console.log('Proxying request to: ', req.query.url);
-    req.pipe(request({
-        url: req.query.url,
-        strictSSL: false
-    }).on('error', next)).pipe(res);
-});
-
-const webpack = require('webpack');
-const webpackConfig = require('./webpack.config.js');
-webpackConfig.plugins.push(new webpack.HotModuleReplacementPlugin());
-webpackConfig.plugins.push(function() { this.plugin('watch-run', function(watching, callback) { console.log('Begin compile at ' + new Date()); callback(); }) });
-
-webpackConfig.entry.openmct = [
-    'webpack-hot-middleware/client?reload=true',
-    webpackConfig.entry.openmct
-];
-
-const compiler = webpack(webpackConfig);
-
-app.use(require('webpack-dev-middleware')(
-    compiler,
-    {
-        publicPath: '/dist',
-        logLevel: 'warn'
+    // Show command line options
+    if (options.help || options.h) {
+        console.log("\nUsage: node app.js [options]\n");
+        console.log("Options:");
+        console.log("  --help, -h               Show this message.");
+        console.log("  --port, -p <number>      Specify port.");
+        console.log("  --include, -i <bundle>   Include the specified bundle.");
+        console.log("  --exclude, -x <bundle>   Exclude the specified bundle.");
+        console.log("  --directory, -D <bundle>   Serve files from specified directory.");
+        console.log("");
+        process.exit(0);
     }
-));
 
-app.use(require('webpack-hot-middleware')(
-    compiler,
-    {
+    app.disable('x-powered-by');
 
-    }
-));
+    // Override bundles.json for HTTP requests
+    app.use('/' + BUNDLE_FILE, function (req, res) {
+        var bundles;
 
-// Expose index.html for development users.
-app.get('/', function (req, res) {
-    fs.createReadStream('index.html').pipe(res);
-});
+        try {
+            bundles = JSON.parse(fs.readFileSync(BUNDLE_FILE, 'utf8'));
+        } catch (e) {
+            bundles = [];
+        }
 
-// Finally, open the HTTP server and log the instance to the console
-app.listen(options.port, options.host, function() {
-    console.log('Open MCT application running at %s:%s', options.host, options.port)
-});
+        // Handle command line inclusions/exclusions
+        bundles = bundles.concat(options.include);
+        bundles = bundles.filter(function (bundle) {
+            return options.exclude.indexOf(bundle) === -1;
+        });
+        bundles = bundles.filter(function (bundle, index) { // Uniquify
+            return bundles.indexOf(bundle) === index;
+        });
+
+        res.send(JSON.stringify(bundles));
+    });
+
+    app.use('/proxyUrl', function proxyRequest(req, res, next) {
+        console.log('Proxying request to: ', req.query.url);
+        req.pipe(request({
+            url: req.query.url,
+            strictSSL: false
+        }).on('error', next)).pipe(res);
+    });
+
+    // Expose everything else as static files
+    app.use(express['static'](options.directory));
+
+    // Finally, open the HTTP server and log the instance to the console
+    app.listen(options.port, function() {
+        console.log('Open MCT application running at localhost:' + options.port)
+    });
+}());

bower.json

@@ -0,0 +1,28 @@
+{
+  "name": "openmct",
+  "description": "The Open MCT core platform",
+  "main": "",
+  "license": "Apache-2.0",
+  "moduleType": [],
+  "homepage": "http://nasa.github.io/openmct/",
+  "private": true,
+  "dependencies": {
+    "angular": "1.4.4",
+    "angular-route": "1.4.4",
+    "moment": "^2.11.1",
+    "moment-duration-format": "^1.3.0",
+    "requirejs": "~2.1.22",
+    "text": "requirejs-text#^2.0.14",
+    "es6-promise": "^3.3.0",
+    "screenfull": "^3.0.0",
+    "node-uuid": "^1.4.7",
+    "comma-separated-values": "^3.6.4",
+    "file-saver": "^1.3.3",
+    "zepto": "^1.1.6",
+    "eventemitter3": "^1.2.0",
+    "lodash": "3.10.1",
+    "almond": "~0.3.2",
+    "html2canvas": "^0.4.1",
+    "moment-timezone": "^0.5.13"
+  }
+}

build-docs.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 #*****************************************************************************
-#* Open MCT, Copyright (c) 2014-2021, United States Government
+#* Open MCT, Copyright (c) 2014-2017, United States Government
 #* as represented by the Administrator of the National Aeronautics and Space
 #* Administration. All rights reserved.
 #*

circle.yml

@@ -0,0 +1,27 @@
+machine:
+  node:
+    version: 4.7.0
+
+dependencies:
+  pre:
+    - npm install -g npm@latest
+
+deployment:
+  production:
+    branch: master
+    commands:
+        - npm install canvas nomnoml
+        - ./build-docs.sh
+  openmctweb-staging-deux:
+    branch: mobile
+    heroku:
+      appname: openmctweb-staging-deux
+test:
+  post:
+    - gulp lint
+    - gulp checkstyle
+
+general:
+  branches:
+    ignore:
+      - gh-pages

codecov.yml

@@ -1,31 +0,0 @@
-codecov:
-  require_ci_to_pass: false #This setting will update the bot regardless of whether or not tests pass
-
-coverage:
-  status:
-    project:
-      default:
-        informational: true
-    patch:
-      default:
-        informational: true
-  precision: 2
-  round: down
-  range: "66...100"
-
-ignore:
-  - "**/*Spec.js"
-  - "e2e"
-
-parsers:
-  gcov:
-    branch_detection:
-      conditional: true
-      loop: true
-      method: false
-      macro: false
-
-comment:
-  layout: "reach,diff,flags,files,footer"
-  behavior: default
-  require_changes: false

copyright-notice.js

@@ -1,21 +0,0 @@
-/*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
- * as represented by the Administrator of the National Aeronautics and Space
- * Administration. All rights reserved.
- *
- * Open MCT is licensed under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- * http://www.apache.org/licenses/LICENSE-2.0.
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
- * License for the specific language governing permissions and limitations
- * under the License.
- *
- * Open MCT includes source code licensed under additional open source
- * licenses. See the Open Source Licenses file (LICENSES.md) included with
- * this source code distribution or the Licensing information page available
- * at runtime from the About dialog for additional information.
- *****************************************************************************/

docs/gendocs.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *

docs/src/design/proposals/APIRedesign.md

@@ -423,7 +423,7 @@ which can help with this, however.
   instead of separate approaches for static and substitutable
   dependencies.
 * Removes need to understand Angular's DI mechanism.
-* Improves usability of documentation (`typeService` is an
+* Improves useability of documentation (`typeService` is an
   instance of `CompositeService` and implements `TypeService`
   so you can easily traverse links in the JSDoc.)
 * Can be used more easily from Web Workers, allowing services
@@ -1124,7 +1124,7 @@ app.config(['actionRegistryProvider', function (arp) {
 ### Detriments
 
 * Slightly increases dependency on Angular; other dependency injectors
-  may not offer comparable ways to specify dependencies non-globally.
+  may not offer comparable ways to specificy dependencies non-globally.
 * Not clear (or will take effort to make clear) which dependencies are
   available for which extensions. Could be mitigated by standardizing
   descriptions of context across actions and views, but that may offer
@@ -1250,7 +1250,7 @@ take. Should not be default behavior.
 
 Proposal | Consensus
 ------|------
-Imperative component registries | [:+1:](https://github.com/nasa/openmctweb/issues/462)
+Imperitive component registries | [:+1:](https://github.com/nasa/openmctweb/issues/462)
 Get rid of "extension category" concept. | [:+1:](https://github.com/nasa/openmctweb/issues/462)
 Reduce number and depth of extension points | :+1:
 Composite services should not be the default | [:question:](https://github.com/nasa/openmctweb/issues/463)

docs/src/design/proposals/APIRedesign_PeteRichards.md

@@ -3,7 +3,7 @@
 **Table of Contents**  *generated with [DocToc](https://github.com/thlorenz/doctoc)*
 
 - [Reducing interface depth (the bundle.json version)](#reducing-interface-depth-the-bundlejson-version)
-  - [Imperative component registries](#imperative-component-registries)
+  - [Imperitive component registries](#imperative-component-registries)
   - [Get rid of "extension category" concept.](#get-rid-of-extension-category-concept)
   - [Reduce number and depth of extension points](#reduce-number-and-depth-of-extension-points)
   - [Composite services should not be the default](#composite-services-should-not-be-the-default)
@@ -145,7 +145,7 @@ Then, if we're using imperative methods for extending the application we can use
 <script>
 // can configure from object
 var myApp = new OpenMCTWeb({
-  persistence: {
+  persitence: {
     providers: [
       {
         type: 'elastic',

docs/src/guide/index.md

@@ -425,14 +425,14 @@ tests, as well as a file named `suite.json` describing which files to test.
 Should have the same folder structure as the `src` directory; see the section on 
 automated testing for more information. 
  
-For example, the directory structure for bundle `platform/commonUI/dialog`  looks 
+For example, the directory structure for bundle `platform/commonUI/about`  looks 
 like: 
 
     Platform
       |
       |-commonUI
       |
-      +-dialog
+      +-about
         |
         |-res
         |

docs/src/index.md

@@ -25,7 +25,7 @@
 ## Legacy Documentation
 
 As we transition to a new API, the following documentation for the old API
-(which is supported during the transition) may be useful as well:
+(which is supported during the transtion) may be useful as well:
 
  * The [Architecture Overview](architecture/) describes the concepts used
  throughout Open MCT, and gives a high level overview of the platform's design.
@@ -33,5 +33,5 @@ As we transition to a new API, the following documentation for the old API
  * The [Developer's Guide](guide/) goes into more detail about how to use the
  platform and the functionality that it provides.
 
- * The [Tutorials](https://github.com/nasa/openmct-tutorial) give examples of extending the platform to add
+ * The [Tutorials](tutorials/) give examples of extending the platform to add
  functionality, and integrate with data sources.

docs/src/process/cycle.md

@@ -73,11 +73,11 @@ acceptance testing (e.g. by resolving any blockers found); any
 resources not needed for this effort should be used to begin work
 for the subsequent sprint.
 
-| Week  | Mon                       | Tue    | Wed | Thu                          | Fri                                   |
-|:-----:|:-------------------------:|:------:|:---:|:----------------------------:|:-------------------------------------:|
-| __1__ | Sprint plan               | Tag-up |     |                              |                                       |
-| __2__ |                           | Tag-up |     |                              | Code freeze  and sprint branch        |
-| __3__ | Per-sprint testing        | Triage |     | _Per-sprint testing*_        | Ship and merge sprint branch to master|
+| Week  | Mon                       | Tue    | Wed | Thu                          | Fri         |
+|:-----:|:-------------------------:|:------:|:---:|:----------------------------:|:-----------:|
+| __1__ | Sprint plan               | Tag-up |     |                              |             |
+| __2__ |                           | Tag-up |     |                              | Code freeze |
+| __3__ | Per-sprint testing        | Triage |     | _Per-sprint testing*_        | Ship        |
 
 * If necessary.
 
@@ -105,20 +105,14 @@ emphasis on testing.
     that team may begin work for that sprint during the
     third week, since testing and blocker resolution is unlikely
     to require all available resources.
-  * Testing success criteria identified per issue (where necessary). This could be in the form of acceptance tests on the issue or detailing performance tests, for example.
 * __Tag-up.__ Check in and status update among development team.
   May amend plan for sprint as-needed.
 * __Code freeze.__ Any new work from this sprint
   (features, bug fixes, enhancements) must be integrated by the
-  end of the second week of the sprint. After code freeze, a sprint
-  branch will be created (and until the end of the sprint) the only 
-  changes that should be merged into the sprint branch should 
-  directly address issues needed to pass acceptance testing.
-  During this time, any other feature development will continue to
-  be merged into the master branch for the next sprint.
-* __Sprint branch merge to master.__ After acceptance testing, the sprint branch
-  will be merged back to the master branch. Any code conflicts that 
-  arise will be resolved by the team.
+  end of the second week of the sprint. After code freeze
+  (and until the end of the sprint) the only changes that should be
+  merged into the master branch should directly address issues
+  needed to pass acceptance testing.
 * [__Per-release Testing.__](testing/plan.md#per-release-testing)
   Structured testing with predefined
   success criteria. No release should ship without passing
@@ -132,8 +126,8 @@ emphasis on testing.
   * [__Testathon.__](testing/plan.md#user-testing)
     Multi-user testing, involving as many users as
     is feasible, plus development team. Open-ended; should verify
-    completed work from this sprint using the sprint branch, test 
-    exploratorily for regressions, et cetera.
+    completed work from this sprint, test exploratorily for
+    regressions, et cetera.
   * [__Long-Duration Test.__](testing/plan.md#long-duration-testing) A
     test to verify that the software remains
     stable after running for longer durations. May include some
@@ -149,7 +143,7 @@ emphasis on testing.
   Subset of Pre-release Testing
   which should be performed before shipping at the end of any
   sprint. Time is allocated for a second round of
-  Pre-release Testing if the first round is not passed. Smoke tests collected from issues/PRs
+  Pre-release Testing if the first round is not passed.
 * __Triage.__ Team reviews issues from acceptance testing and uses
   success criteria to determine whether or not they should block
   release, then formulates a plan to address these issues before

docs/src/process/testing/plan.md

@@ -19,7 +19,7 @@ Testing for Open MCT includes:
 
 Manual, non-rigorous testing of the software and/or specific features
 of interest. Verifies that the software runs and that basic functionality
-is present. The outcome of Smoke Testing should be a simplified list of Acceptance Tests which could be executed by another team member with sufficient context.
+is present.
 
 ### Unit Testing
 
@@ -49,7 +49,7 @@ User testing will focus on the following activities:
 * General "trying to break things."
 
 During user testing, users will
-[report issues](https://github.com/nasa/openmct/issues/new/choose)
+[report issues](https://github.com/nasa/openmctweb/blob/master/CONTRIBUTING.md#issue-reporting)
 as they are encountered.
 
 Desired outcomes of user testing are:
@@ -71,7 +71,7 @@ usage. After twenty-four hours, the software is evaluated for:
   at the start of the test? Is it as responsive?
 
 Any defects or unexpected behavior identified during testing should be
-[reported as issues](https://github.com/nasa/openmct/issues/new/choose)
+[reported as issues](https://github.com/nasa/openmctweb/blob/master/CONTRIBUTING.md#issue-reporting)
 and reviewed for severity.
 
 ## Test Performance
@@ -125,22 +125,3 @@ A release is not closed until both categories have been performed on
 the latest snapshot of the software, _and_ no issues labelled as
 ["blocker" or "critical"](https://github.com/nasa/openmctweb/blob/master/CONTRIBUTING.md#issue-reporting)
 remain open.
-
-### Testathons
-Testathons can be used as a means of performing per-sprint and per-release testing. 
-
-#### Timing
-For per-sprint testing, a testathon is typically performed at the beginning of the third week of a sprint, and again later that week to verify any fixes. For per-release testing, a testathon is typically performed prior to any formal testing processes that are applicable to that release.
-
-#### Process
-
-1. Prior to the scheduled testathon, a list will be compiled of all issues that are closed and unverified.
-2. For each issue, testers should review the associated PR for testing instructions. See the contributing guide for instructions on [pull requests](https://github.com/nasa/openmct/blob/master/CONTRIBUTING.md#merging).
-3. As each issue is verified via testing, any team members testing it should leave a comment on that issue indicating that it has been verified fixed.
-4. If a bug is found that relates to an issue being tested, notes should be included on the associated issue, and the issue should be reopened. Bug notes should include reproduction steps.
-5. For any bugs that are not obviously related to any of the issues under test, a new issue should be created with details about the bug, including reproduction steps. If unsure about whether a bug relates to an issue being tested, just create a new issue.
-6. At the end of the testathon, triage will take place, where all tested issues will be reviewed.
-7. If verified fixed, an issue will remain closed, and will have the “unverified” label removed.
-8. For any bugs found, a severity will be assigned.
-9. A second testathon will be scheduled for later in the week that will aim to address all issues identified as blockers, as well as any other issues scoped by the team during triage.
-10. Any issues that were not tested will remain "unverified" and will be picked up in the next testathon.

docs/src/process/version.md

@@ -92,60 +92,47 @@ should update (or delegate the task of updating) Open MCT version
 numbers by the following process:
 
 1. Update version number in `package.json`
-  1. Checkout branch created for the last sprint that has been successfully tested.
-  2. Remove a `-SNAPSHOT` suffix from the version in `package.json`.
-  3. Verify that resulting version number meets semantic versioning
-     requirements relative to previous stable version. Increment the 
-     version number if necessary.
-  4. If version is considered unstable (which may be the case during
+  1. Remove `-SNAPSHOT` suffix.
+  2. Verify that resulting version number meets semantic versioning
+     requirements relative to previous stable version. Increment if
+     necessary.
+  3. If version is considered unstable (which may be the case during
      the first three sprints of a release), apply a new suffix per
      [Version Numbering](#version-numbering) guidance above.
 2. Tag the release.
-  1. Commit changes to `package.json` on the new branch created in 
-     the previous step.
+  1. Commit changes to `package.json` on the `master` branch.
      The commit message should reference the sprint being closed,
      preferably by a URL reference to the associated Milestone in
      GitHub.
   2. Verify that build still completes, that application passes
      smoke-testing, and that only differences from tested versions
      are the changes to version number above.
-  3. Push the new branch.
+  3. Push the `master` branch.
   4. Tag this commit with the version number, prepending the letter "v".
      (e.g. `git tag v0.9.3-alpha`)
   5. Push the tag to GitHub. (e.g. `git push origin v0.9.3-alpha`).
 3. Upload a release archive.
-  1. Use the [GitHub release interface](https://github.com/nasa/openmct/releases)
+  1. Run `npm pack` to generate the archive.
+  2. Use the [GitHub release interface](https://github.com/nasa/openmct/releases)
      to draft a new release.
-  2. Choose the existing tag for the new version (created and pushed above.)
+  3. Choose the existing tag for the new version (created and pushed above.)
      Enter the tag name as the release name as well; see existing releases
-     for examples. (e.g. `Open MCT v0.9.3-alpha`)
-  3. Designate the release as a "pre-release" as appropriate (for instance,
+     for examples.
+  4. Attach the release archive.
+  5. Designate the release as a "pre-release" as appropriate (for instance,
      when the version number has been suffixed as unstable, or when
      the version number is below 1.0.0.)
-  4. Add release notes including any breaking changes, enhancements, 
-     bug fixes with solutions in brief.
-  5. Publish the release.
-4. Publish the release to npm
-  1. Login to npm
-  2. Checkout the tag created in the previous step.
-  3. In `package.json` change package to be public (private: false)
-  4. Test the package before publishing by doing `npm publish --dry-run` 
-     if necessary.
-  5. Publish the package to the npmjs registry (e.g. `npm publish --access public`) 
-     NOTE: Use the `--tag unstable` flag to the npm publishj if this is a prerelease.
-  6. Confirm the package has been published (e.g. `https://www.npmjs.com/package/openmct`)
-5. Update snapshot status in `package.json`
-  1. Create a new branch off the `master` branch.
-  2. Remove any suffix from the version number, 
-     or increment the _patch_ version if there is no suffix.
-  3. Append a `-SNAPSHOT` suffix.
-  4. Commit changes to `package.json` on the `master` branch.
+4. Restore snapshot status in `package.json`
+  1. Remove any suffix from the version number, or increment the
+     _patch_ version if there is no suffix.
+  2. Append a `-SNAPSHOT` suffix.
+  3. Commit changes to `package.json` on the `master` branch.
      The commit message should reference the sprint being opened,
      preferably by a URL reference to the associated Milestone in
      GitHub.
-  5. Verify that build still completes, that application passes
+  4. Verify that build still completes, that application passes
      smoke-testing.
-  6. Create a PR to be merged into the `master` branch.
+  5. Push the `master` branch.
 
 Projects dependent on Open MCT being co-developed by the Open MCT
 team should follow a similar process, except that they should

e2e/.eslintrc.js

@@ -1,4 +0,0 @@
-/* eslint-disable no-undef */
-module.exports = {
-    "extends": ["plugin:playwright/playwright-test"]
-};

e2e/playwright-ci.config.js

@@ -1,32 +0,0 @@
-/* eslint-disable no-undef */
-// playwright.config.js
-// @ts-check
-
-/** @type {import('@playwright/test').PlaywrightTestConfig} */
-const config = {
-    retries: 2,
-    testDir: 'tests',
-    timeout: 90 * 1000,
-    webServer: {
-        command: 'npm run start',
-        port: 8080,
-        timeout: 200 * 1000,
-        reuseExistingServer: !process.env.CI
-    },
-    use: {
-        browserName: "chromium",
-        baseURL: 'http://localhost:8080/',
-        headless: true,
-        ignoreHTTPSErrors: true,
-        screenshot: 'on',
-        trace: 'on',
-        video: 'on'
-    },
-    reporter: [
-        ['list'],
-        ['junit', { outputFile: 'test-results/results.xml' }],
-        ['allure-playwright']
-    ]
-};
-
-module.exports = config;

e2e/playwright-local.config.js

@@ -1,31 +0,0 @@
-/* eslint-disable no-undef */
-// playwright.config.js
-// @ts-check
-
-/** @type {import('@playwright/test').PlaywrightTestConfig} */
-const config = {
-    retries: 0,
-    testDir: 'tests',
-    timeout: 30 * 1000,
-    webServer: {
-        command: 'npm run start',
-        port: 8080,
-        timeout: 120 * 1000,
-        reuseExistingServer: !process.env.CI
-    },
-    use: {
-        browserName: "chromium",
-        baseURL: 'http://localhost:8080/',
-        headless: false,
-        ignoreHTTPSErrors: true,
-        screenshot: 'on',
-        trace: 'on',
-        video: 'on'
-    },
-    reporter: [
-        ['list'],
-        ['allure-playwright']
-    ]
-};
-
-module.exports = config;

e2e/playwright-visual.config.js

@@ -1,32 +0,0 @@
-/* eslint-disable no-undef */
-// playwright.config.js
-// @ts-check
-
-/** @type {import('@playwright/test').PlaywrightTestConfig} */
-const config = {
-    retries: 0,
-    testDir: 'tests',
-    timeout: 90 * 1000,
-    webServer: {
-        command: 'npm run start',
-        port: 8080,
-        timeout: 200 * 1000,
-        reuseExistingServer: !process.env.CI
-    },
-    use: {
-        browserName: "chromium",
-        baseURL: 'http://localhost:8080/',
-        headless: true,
-        ignoreHTTPSErrors: true,
-        screenshot: 'on',
-        trace: 'off',
-        video: 'on'
-    },
-    reporter: [
-        ['list'],
-        ['junit', { outputFile: 'test-results/results.xml' }],
-        ['allure-playwright']
-    ]
-};
-
-module.exports = config;

e2e/tests/visual/default.spec.js

@@ -1,73 +0,0 @@
-/*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
- * as represented by the Administrator of the National Aeronautics and Space
- * Administration. All rights reserved.
- *
- * Open MCT is licensed under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- * http://www.apache.org/licenses/LICENSE-2.0.
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
- * License for the specific language governing permissions and limitations
- * under the License.
- *
- * Open MCT includes source code licensed under additional open source
- * licenses. See the Open Source Licenses file (LICENSES.md) included with
- * this source code distribution or the Licensing information page available
- * at runtime from the About dialog for additional information.
- *****************************************************************************/
-
-/*
-Collection of Visual Tests set to run in a default context. These should only use functional
-expect statements to verify assumptions about the state in a test and not for functional
-verification of correctness.
-Note: Larger testsuite sizes are OK due to the setup time associated with these tests. Visual
-tests are not supposed to "fail" on assertions.
-*/
-
-const { test, expect } = require('@playwright/test');
-const percySnapshot = require('@percy/playwright');
-const path = require('path');
-const sinon = require('sinon');
-
-const VISUAL_GRACE_PERIOD = 5 * 1000; //Lets the application "simmer" before the snapshot is taken
-
-// Snippet from https://github.com/microsoft/playwright/issues/6347#issuecomment-965887758
-// Will replace with cy.clock() equivalent
-test.beforeEach(async ({ context }) => {
-    await context.addInitScript({
-        // eslint-disable-next-line no-undef
-        path: path.join(__dirname, '../../..', './node_modules/sinon/pkg/sinon.js')
-    });
-    await context.addInitScript(() => {
-        window.__clock = sinon.useFakeTimers(); //Set browser clock to UNIX Epoch
-    });
-});
-
-test('Visual - Root and About', async ({ page }) => {
-    // Go to baseURL
-    await page.goto('/', { waitUntil: 'networkidle' });
-
-    // Verify that Create button is actionable
-    const createButtonLocator = page.locator('button:has-text("Create")');
-    await expect(createButtonLocator).toBeEnabled();
-
-    // Take a snapshot of the Dashboard
-    await page.waitForTimeout(VISUAL_GRACE_PERIOD);
-    await percySnapshot(page, 'Root');
-
-    // Click About button
-    await page.click('.l-shell__app-logo');
-
-    // Modify the Build information in 'about' to be consistent run-over-run
-    const versionInformationLocator = page.locator('ul.t-info.l-info.s-info');
-    await expect(versionInformationLocator).toBeEnabled();
-    await versionInformationLocator.evaluate(node => node.innerHTML = '<li>Version: visual-snapshot</li> <li>Build Date: Mon Nov 15 2021 08:07:51 GMT-0800 (Pacific Standard Time)</li> <li>Revision: 93049cdbc6c047697ca204893db9603b864b8c9f</li> <li>Branch: master</li>');
-
-    // Take a snapshot of the About modal
-    await page.waitForTimeout(VISUAL_GRACE_PERIOD);
-    await percySnapshot(page, 'About');
-});

example/builtins/README.md

@@ -0,0 +1,8 @@
+This bundle is intended to serve as an example of registering
+extensions which are mapped directly to built-in Angular features.
+
+These are:
+* Controllers
+* Directives
+* Routes
+* Services

example/builtins/bundle.js

@@ -0,0 +1,74 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define*/
+
+define([
+    "./src/ExampleController",
+    "./src/ExampleDirective",
+    "./src/ExampleService",
+    'legacyRegistry'
+], function (
+    ExampleController,
+    ExampleDirective,
+    ExampleService,
+    legacyRegistry
+) {
+    "use strict";
+
+    legacyRegistry.register("example/builtins", {
+        "name": "Angular Built-ins Example",
+        "description": "Example showing how to declare extensions with built-in support from Angular.",
+        "sources": "src",
+        "extensions": {
+            "controllers": [
+                {
+                    "key": "ExampleController",
+                    "implementation": ExampleController,
+                    "depends": [
+                        "$scope",
+                        "exampleService"
+                    ]
+                }
+            ],
+            "directives": [
+                {
+                    "key": "exampleDirective",
+                    "implementation": ExampleDirective,
+                    "depends": [
+                        "examples[]"
+                    ]
+                }
+            ],
+            "routes": [
+                {
+                    "templateUrl": "templates/example.html"
+                }
+            ],
+            "services": [
+                {
+                    "key": "exampleService",
+                    "implementation": ExampleService
+                }
+            ]
+        }
+    });
+});

example/builtins/res/templates/example.html

@@ -1,33 +1,24 @@
 <!--
- Open MCT, Copyright (c) 2014-2021, United States Government
+ Open MCT, Copyright (c) 2014-2017, United States Government
  as represented by the Administrator of the National Aeronautics and Space
  Administration. All rights reserved.
+
  Open MCT is licensed under the Apache License, Version 2.0 (the
  "License"); you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
  http://www.apache.org/licenses/LICENSE-2.0.
+
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  License for the specific language governing permissions and limitations
  under the License.
+
  Open MCT includes source code licensed under additional open source
  licenses. See the Open Source Licenses file (LICENSES.md) included with
  this source code distribution or the Licensing information page available
  at runtime from the About dialog for additional information.
 -->
-<template>
-<div></div>
-</template>
-
-<script>
-export default {
-    inject: ['openmct'],
-
-    mounted() {
-        this.openmct.indicators.getIndicatorObjectsByPriority().forEach((indicator) => {
-            this.$el.appendChild(indicator.element);
-        });
-    }
-};
-</script>
+<p>Hello, world! I am the default route.</p>
+<p ng-controller="ExampleController">My controller has told me: "{{phrase}}"</p>
+<span example-directive></span>

example/builtins/src/ExampleController.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,15 +19,24 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define,Promise*/
 
-export default function ladTableCompositionPolicy(openmct) {
-    return function (parent, child) {
-        if (parent.type === 'LadTable') {
-            return openmct.telemetry.isTelemetryObject(child);
-        } else if (parent.type === 'LadTableSet') {
-            return child.type === 'LadTable';
+/**
+ * Module defining ExampleController. Created by vwoeltje on 11/4/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
+
+        /**
+         *
+         * @constructor
+         */
+        function ExampleController($scope, exampleService) {
+            $scope.phrase = exampleService.getMessage();
         }
 
-        return true;
-    };
-}
+        return ExampleController;
+    }
+);

example/builtins/src/ExampleDirective.js

@@ -0,0 +1,66 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define,Promise*/
+
+/**
+ * Module defining ExampleDirective. Created by vwoeltje on 11/4/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
+
+        var HAS_EXTENSIONS = "A directive loaded these message from " +
+                    "example extensions.",
+            NO_EXTENSIONS = "A directive tried to load example extensions," +
+                    " but found none.",
+            MESSAGE = "I heard this from my partial constructor.";
+
+        /**
+         *
+         * @constructor
+         */
+        function ExampleDirective(examples) {
+            // Build up a template from example extensions
+            var template = examples.length > 0 ?
+                    HAS_EXTENSIONS : NO_EXTENSIONS;
+
+            template += "<ul>";
+            examples.forEach(function (E) {
+                template += "<li>";
+                if (typeof E === 'function') {
+                    template += (new E(MESSAGE)).getText();
+                } else {
+                    template += E.text;
+                }
+                template += "</li>";
+            });
+            template += "</ul>";
+
+            return {
+                template: template
+            };
+        }
+
+        return ExampleDirective;
+    }
+);

example/builtins/src/ExampleService.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,22 +19,28 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define,Promise*/
 
+/**
+ * Module defining ExampleService. Created by vwoeltje on 11/4/14.
+ */
 define(
     [],
     function () {
-        function MCTIndicators(openmct) {
+        "use strict";
+
+        /**
+         *
+         * @constructor
+         */
+        function ExampleService() {
             return {
-                restrict: "E",
-                link: function link(scope, element) {
-                    openmct.indicators.indicatorElements
-                        .forEach(function (indicatorElement) {
-                            element.append(indicatorElement);
-                        });
+                getMessage: function () {
+                    return "I heard this from a service";
                 }
             };
         }
 
-        return MCTIndicators;
+        return ExampleService;
     }
 );

example/composite/bundle.js

@@ -0,0 +1,82 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define*/
+
+define([
+    "./src/SomeProvider",
+    "./src/SomeOtherProvider",
+    "./src/SomeDecorator",
+    "./src/SomeOtherDecorator",
+    "./src/SomeAggregator",
+    "./src/SomeOtherExample",
+    'legacyRegistry'
+], function (
+    SomeProvider,
+    SomeOtherProvider,
+    SomeDecorator,
+    SomeOtherDecorator,
+    SomeAggregator,
+    SomeOtherExample,
+    legacyRegistry
+) {
+    "use strict";
+
+    legacyRegistry.register("example/composite", {
+        "extensions": {
+            "components": [
+                {
+                    "implementation": SomeProvider,
+                    "provides": "someService",
+                    "type": "provider"
+                },
+                {
+                    "implementation": SomeOtherProvider,
+                    "provides": "someService",
+                    "type": "provider"
+                },
+                {
+                    "implementation": SomeDecorator,
+                    "provides": "someService",
+                    "type": "decorator"
+                },
+                {
+                    "implementation": SomeOtherDecorator,
+                    "provides": "someService",
+                    "type": "decorator"
+                },
+                {
+                    "implementation": SomeAggregator,
+                    "provides": "someService",
+                    "type": "aggregator"
+                }
+            ],
+            "examples": [
+                {
+                    "implementation": SomeOtherExample,
+                    "depends": [
+                        "someService"
+                    ]
+                }
+            ]
+        }
+    });
+});

example/composite/src/SomeAggregator.js

@@ -0,0 +1,50 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define,Promise*/
+
+/**
+ * Module defining SomeAggregator. Created by vwoeltje on 11/5/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
+
+        /**
+         *
+         * @constructor
+         */
+        function SomeAggregator(someProviders) {
+            return {
+                getMessages: function () {
+                    return someProviders.map(function (provider) {
+                        return provider.getMessages();
+                    }).reduce(function (a, b) {
+                        return a.concat(b);
+                    }, []);
+                }
+            };
+        }
+
+        return SomeAggregator;
+    }
+);

example/composite/src/SomeDecorator.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,19 +19,30 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define,Promise*/
 
-import LegacyContextMenuAction from './LegacyContextMenuAction';
+/**
+ * Module defining SomeDecorator. Created by vwoeltje on 11/5/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
 
-export default function LegacyActionAdapter(openmct, legacyActions) {
-    function contextualCategoryOnly(action) {
-        if (action.category === 'contextual' || (Array.isArray(action.category) && action.category.includes('contextual'))) {
-            return true;
+        /**
+         *
+         * @constructor
+         */
+        function SomeDecorator(someProvider) {
+            return {
+                getMessages: function () {
+                    return someProvider.getMessages().map(function (msg) {
+                        return msg.toLocaleUpperCase();
+                    });
+                }
+            };
         }
 
-        return false;
+        return SomeDecorator;
     }
-
-    legacyActions.filter(contextualCategoryOnly)
-        .map(LegacyAction => new LegacyContextMenuAction(openmct, LegacyAction))
-        .forEach(openmct.actions.register);
-}
+);

example/composite/src/SomeOtherDecorator.js

@@ -0,0 +1,48 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define,Promise*/
+
+/**
+ * Module defining SomeOtherDecorator. Created by vwoeltje on 11/5/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
+
+        /**
+         *
+         * @constructor
+         */
+        function SomeOtherDecorator(someProvider) {
+            return {
+                getMessages: function () {
+                    return someProvider.getMessages().map(function (msg) {
+                        return msg + "...";
+                    });
+                }
+            };
+        }
+
+        return SomeOtherDecorator;
+    }
+);

example/composite/src/SomeOtherExample.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,19 +19,28 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define,Promise*/
 
-define(function () {
-    return {
-        name: 'Telemetry Table',
-        description: 'Display telemetry values for the current time bounds in tabular form. Supports filtering and sorting.',
-        creatable: true,
-        cssClass: 'icon-tabular-realtime',
-        initialize(domainObject) {
-            domainObject.composition = [];
-            domainObject.configuration = {
-                columnWidths: {},
-                hiddenColumns: {}
+/**
+ * Module defining SomeOtherExample. Created by vwoeltje on 11/5/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
+
+        /**
+         *
+         * @constructor
+         */
+        function SomeOtherExample(someService) {
+            return {
+                getText: function () {
+                    return someService.getMessages().join(" | ");
+                }
             };
         }
-    };
-});
+
+        return SomeOtherExample;
+    }
+);

example/composite/src/SomeOtherProvider.js

@@ -0,0 +1,48 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define,Promise*/
+
+/**
+ * Module defining SomeOtherProvider. Created by vwoeltje on 11/5/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
+
+        /**
+         *
+         * @constructor
+         */
+        function SomeOtherProvider() {
+            return {
+                getMessages: function () {
+                    return [
+                        "I am a message from some other provider."
+                    ];
+                }
+            };
+        }
+
+        return SomeOtherProvider;
+    }
+);

example/composite/src/SomeProvider.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,29 +19,30 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define,Promise*/
 
-export default class ISOTimeFormat {
-    constructor() {
-        this.key = 'iso';
-    }
+/**
+ * Module defining SomeProvider. Created by vwoeltje on 11/5/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
 
-    format(value) {
-        if (value !== undefined) {
-            return new Date(value).toISOString();
-        } else {
-            return value;
-        }
-    }
-
-    parse(text) {
-        if (typeof text === 'number' || text === undefined) {
-            return text;
+        /**
+         *
+         * @constructor
+         */
+        function SomeProvider() {
+            return {
+                getMessages: function () {
+                    return [
+                        "I am a message from some provider."
+                    ];
+                }
+            };
         }
 
-        return Date.parse(text);
+        return SomeProvider;
     }
-
-    validate(text) {
-        return !isNaN(Date.parse(text));
-    }
-}
+);

example/eventGenerator/bundle.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,62 +19,62 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define([
-    "./src/EventTelemetryProvider"
+    "./src/EventTelemetryProvider",
+    'legacyRegistry'
 ], function (
-    EventTelemetryProvider
+    EventTelemetryProvider,
+    legacyRegistry
 ) {
     "use strict";
 
-    return {
-        name: "example/eventGenerator",
-        definition: {
-            "name": "Event Message Generator",
-            "description": "For development use. Creates sample event message data that mimics a live data stream.",
-            "extensions": {
-                "components": [
-                    {
-                        "implementation": EventTelemetryProvider,
-                        "type": "provider",
-                        "provides": "telemetryService",
-                        "depends": [
-                            "$q",
-                            "$timeout"
+    legacyRegistry.register("example/eventGenerator", {
+        "name": "Event Message Generator",
+        "description": "For development use. Creates sample event message data that mimics a live data stream.",
+        "extensions": {
+            "components": [
+                {
+                    "implementation": EventTelemetryProvider,
+                    "type": "provider",
+                    "provides": "telemetryService",
+                    "depends": [
+                        "$q",
+                        "$timeout"
+                    ]
+                }
+            ],
+            "types": [
+                {
+                    "key": "eventGenerator",
+                    "name": "Event Message Generator",
+                    "cssClass": "icon-folder-new",
+                    "description": "For development use. Creates sample event message data that mimics a live data stream.",
+                    "priority": 10,
+                    "features": "creation",
+                    "model": {
+                        "telemetry": {}
+                    },
+                    "telemetry": {
+                        "source": "eventGenerator",
+                        "domains": [
+                            {
+                                "key": "time",
+                                "name": "Time",
+                                "format": "utc"
+                            }
+                        ],
+                        "ranges": [
+                            {
+                                "key": "message",
+                                "name": "Message",
+                                "format": "string"
+                            }
                         ]
                     }
-                ],
-                "types": [
-                    {
-                        "key": "eventGenerator",
-                        "name": "Event Message Generator",
-                        "cssClass": "icon-generator-events",
-                        "description": "For development use. Creates sample event message data that mimics a live data stream.",
-                        "priority": 10,
-                        "features": "creation",
-                        "model": {
-                            "telemetry": {}
-                        },
-                        "telemetry": {
-                            "source": "eventGenerator",
-                            "domains": [
-                                {
-                                    "key": "utc",
-                                    "name": "Timestamp",
-                                    "format": "utc"
-                                }
-                            ],
-                            "ranges": [
-                                {
-                                    "key": "message",
-                                    "name": "Message",
-                                    "format": "string"
-                                }
-                            ]
-                        }
-                    }
-                ]
-            }
+                }
+            ]
         }
-    };
+    });
 });

example/eventGenerator/src/EventTelemetry.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,41 +19,42 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define */
 
 /**
- * Module defining EventTelemetry.
+ * Module defining EventTelemetry. 
  * Created by chacskaylo on 06/18/2015.
- * Modified by shale on 06/23/2015.
+ * Modified by shale on 06/23/2015. 
  */
 define(
-    ['../data/transcript.json'],
-    function (messages) {
+    ['text!../data/transcript.json'],
+    function (transcript) {
         "use strict";
 
-        var firstObservedTime = Date.now();
-
+        var firstObservedTime = Date.now(),
+            messages = JSON.parse(transcript);
+        
         function EventTelemetry(request, interval) {
 
             var latestObservedTime = Date.now(),
                 count = Math.floor((latestObservedTime - firstObservedTime) / interval),
                 generatorData = {};
-
+            
             generatorData.getPointCount = function () {
                 return count;
             };
 
             generatorData.getDomainValue = function (i, domain) {
-                return i * interval
-                        + (domain !== 'delta' ? firstObservedTime : 0);
+                return i * interval +
+                        (domain !== 'delta' ? firstObservedTime : 0);
             };
-
-            generatorData.getRangeValue = function (i, range) {
-                var domainDelta = this.getDomainValue(i) - firstObservedTime,
+            
+	        generatorData.getRangeValue = function (i, range) {
+		        var domainDelta = this.getDomainValue(i) - firstObservedTime,
                     ind = i % messages.length;
-
                 return messages[ind] + " - [" + domainDelta.toString() + "]";
-            };
-
+	        };
+            
             return generatorData;
         }
 

example/eventGenerator/src/EventTelemetryProvider.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,6 +19,7 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define,Promise*/
 
 /**
  * Module defining EventTelemetryProvider. Created by chacskaylo on 06/18/2015.
@@ -33,9 +34,11 @@ define(
          * @constructor
          */
         function EventTelemetryProvider($q, $timeout) {
-            var subscriptions = [],
-                genInterval = 1000,
-                generating = false;
+            var
+	            subscriptions = [],
+	            genInterval = 1000,
+                generating = false,
+                id = Math.random() * 100000;
 
             //
             function matchesSource(request) {
@@ -44,6 +47,7 @@ define(
 
             // Used internally; this will be repacked by doPackage
             function generateData(request) {
+	            //console.log("generateData " + (Date.now() - startTime).toString());
                 return {
                     key: request.key,
                     telemetry: new EventTelemetry(request, genInterval)
@@ -56,7 +60,6 @@ define(
                 results.forEach(function (result) {
                     packaged[result.key] = result.telemetry;
                 });
-
                 // Format as expected (sources -> keys -> telemetry)
                 return { eventGenerator: packaged };
             }

example/export/ExportTelemetryAsCSVAction.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,6 +19,7 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define([], function () {
     'use strict';
@@ -57,15 +58,15 @@ define([], function () {
                 row,
                 i;
 
-            function copyDomainsToRow(telemetryRow, index) {
+            function copyDomainsToRow(row, index) {
                 domains.forEach(function (domain) {
-                    telemetryRow[domain.name] = series.getDomainValue(index, domain.key);
+                    row[domain.name] = series.getDomainValue(index, domain.key);
                 });
             }
 
-            function copyRangesToRow(telemetryRow, index) {
+            function copyRangesToRow(row, index) {
                 ranges.forEach(function (range) {
-                    telemetryRow[range.name] = series.getRangeValue(index, range.key);
+                    row[range.name] = series.getRangeValue(index, range.key);
                 });
             }
 
@@ -75,14 +76,13 @@ define([], function () {
                 copyRangesToRow(row, i);
                 rows.push(row);
             }
-
             exportService.exportCSV(rows, { headers: headers });
         });
     };
 
     ExportTelemetryAsCSVAction.appliesTo = function (context) {
-        return context.domainObject
-            && context.domainObject.hasCapability("telemetry");
+        return context.domainObject &&
+            context.domainObject.hasCapability("telemetry");
     };
 
     return ExportTelemetryAsCSVAction;

example/export/bundle.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,28 +19,27 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define([
+    'legacyRegistry',
     './ExportTelemetryAsCSVAction'
-], function (ExportTelemetryAsCSVAction) {
+], function (legacyRegistry, ExportTelemetryAsCSVAction) {
     "use strict";
 
-    return {
-        name: "example/export",
-        definition: {
-            "name": "Example of using CSV Export",
-            "extensions": {
-                "actions": [
-                    {
-                        "key": "example.export",
-                        "name": "Export Telemetry as CSV",
-                        "implementation": ExportTelemetryAsCSVAction,
-                        "category": "contextual",
-                        "cssClass": "icon-download",
-                        "depends": ["exportService"]
-                    }
-                ]
-            }
+    legacyRegistry.register("example/export", {
+        "name": "Example of using CSV Export",
+        "extensions": {
+            "actions": [
+                {
+                    "key": "example.export",
+                    "name": "Export Telemetry as CSV",
+                    "implementation": ExportTelemetryAsCSVAction,
+                    "category": "contextual",
+                    "cssClass": "icon-download",
+                    "depends": [ "exportService" ]
+                }
+            ]
         }
-    };
+    });
 });

example/extensions/bundle.js

@@ -0,0 +1,51 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define*/
+
+define([
+    "./src/SomeExample",
+    'legacyRegistry'
+], function (
+    SomeExample,
+    legacyRegistry
+) {
+    "use strict";
+
+    legacyRegistry.register("example/extensions", {
+        "name": "Custom Extensions Examples",
+        "description": "Example showing how to declare custom extensions.",
+        "sources": "src",
+        "extensions": {
+            "examples": [
+                {
+                    "text": "I came from example/extensions"
+                },
+                {
+                    "implementation": SomeExample,
+                    "depends": [
+                        "exampleService"
+                    ]
+                }
+            ]
+        }
+    });
+});

example/extensions/src/SomeExample.js

@@ -0,0 +1,52 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define,Promise*/
+
+/**
+ * Module defining SomeExample. Created by vwoeltje on 11/5/14.
+ */
+define(
+    [],
+    function () {
+        "use strict";
+
+        /**
+         *
+         * @constructor
+         */
+        function SomeExample(exampleService, message) {
+            return {
+                getText: function () {
+                    return [
+                        '"',
+                        exampleService.getMessage(),
+                        '" and "',
+                        message,
+                        '"'
+                    ].join("");
+                }
+            };
+        }
+
+        return SomeExample;
+    }
+);

example/forms/bundle.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,35 +19,35 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define([
-    "./src/ExampleFormController"
+    "./src/ExampleFormController",
+    'legacyRegistry'
 ], function (
-    ExampleFormController
+    ExampleFormController,
+    legacyRegistry
 ) {
     "use strict";
 
-    return {
-        name: "example/forms",
-        definition: {
-            "name": "Declarative Forms example",
-            "sources": "src",
-            "extensions": {
-                "controllers": [
-                    {
-                        "key": "ExampleFormController",
-                        "implementation": ExampleFormController,
-                        "depends": [
-                            "$scope"
-                        ]
-                    }
-                ],
-                "routes": [
-                    {
-                        "templateUrl": "templates/exampleForm.html"
-                    }
-                ]
-            }
+    legacyRegistry.register("example/forms", {
+        "name": "Declarative Forms example",
+        "sources": "src",
+        "extensions": {
+            "controllers": [
+                {
+                    "key": "ExampleFormController",
+                    "implementation": ExampleFormController,
+                    "depends": [
+                        "$scope"
+                    ]
+                }
+            ],
+            "routes": [
+                {
+                    "templateUrl": "templates/exampleForm.html"
+                }
+            ]
         }
-    };
+    });
 });

example/forms/res/templates/exampleForm.html

@@ -1,5 +1,5 @@
 <!--
- Open MCT, Copyright (c) 2014-2021, United States Government
+ Open MCT, Copyright (c) 2014-2017, United States Government
  as represented by the Administrator of the National Aeronautics and Space
  Administration. All rights reserved.
 

example/forms/src/ExampleFormController.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,6 +19,7 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define,window*/
 
 define(
     [],
@@ -79,7 +80,7 @@ define(
                                 control: "button",
                                 csslass: "icon-save",
                                 click: function () {
-                                    console.log("Save");
+                                    window.alert("Save");
                                 }
                             },
                             {
@@ -87,7 +88,7 @@ define(
                                 csslass: "icon-x",
                                 description: "Button B",
                                 click: function () {
-                                    console.log("Cancel");
+                                    window.alert("Cancel");
                                 }
                             },
                             {
@@ -96,7 +97,7 @@ define(
                                 description: "Button C",
                                 disabled: true,
                                 click: function () {
-                                    console.log("Delete");
+                                    window.alert("Delete");
                                 }
                             }
                         ]
@@ -151,22 +152,10 @@ define(
                                 name: "Choose something",
                                 control: "select",
                                 options: [
-                                    {
-                                        name: "Hats",
-                                        value: "hats"
-                                    },
-                                    {
-                                        name: "Bats",
-                                        value: "bats"
-                                    },
-                                    {
-                                        name: "Cats",
-                                        value: "cats"
-                                    },
-                                    {
-                                        name: "Mats",
-                                        value: "mats"
-                                    }
+                                    { name: "Hats", value: "hats" },
+                                    { name: "Bats", value: "bats" },
+                                    { name: "Cats", value: "cats" },
+                                    { name: "Mats", value: "mats" }
                                 ],
                                 key: "aChoice"
                             },
@@ -175,22 +164,10 @@ define(
                                 control: "select",
                                 required: true,
                                 options: [
-                                    {
-                                        name: "Hats",
-                                        value: "hats"
-                                    },
-                                    {
-                                        name: "Bats",
-                                        value: "bats"
-                                    },
-                                    {
-                                        name: "Cats",
-                                        value: "cats"
-                                    },
-                                    {
-                                        name: "Mats",
-                                        value: "mats"
-                                    }
+                                    { name: "Hats", value: "hats" },
+                                    { name: "Bats", value: "bats" },
+                                    { name: "Cats", value: "cats" },
+                                    { name: "Mats", value: "mats" }
                                 ],
                                 key: "aRequiredChoice"
                             }

example/generator/GeneratorMetadataProvider.js

@@ -1,142 +0,0 @@
-define([
-    'lodash'
-], function (
-    _
-) {
-
-    var METADATA_BY_TYPE = {
-        'generator': {
-            values: [
-                {
-                    key: "name",
-                    name: "Name",
-                    format: "string"
-                },
-                {
-                    key: "utc",
-                    name: "Time",
-                    format: "utc",
-                    hints: {
-                        domain: 1
-                    }
-                },
-                {
-                    key: "yesterday",
-                    name: "Yesterday",
-                    format: "utc",
-                    hints: {
-                        domain: 2
-                    }
-                },
-                {
-                    key: "cos",
-                    name: "Cosine",
-                    unit: "deg",
-                    formatString: '%0.2f',
-                    hints: {
-                        domain: 3
-                    }
-                },
-                // Need to enable "LocalTimeSystem" plugin to make use of this
-                // {
-                //     key: "local",
-                //     name: "Time",
-                //     format: "local-format",
-                //     source: "utc",
-                //     hints: {
-                //         domain: 3
-                //     }
-                // },
-                {
-                    key: "sin",
-                    name: "Sine",
-                    unit: "Hz",
-                    formatString: '%0.2f',
-                    hints: {
-                        range: 1
-                    }
-                },
-                {
-                    key: "cos",
-                    name: "Cosine",
-                    unit: "deg",
-                    formatString: '%0.2f',
-                    hints: {
-                        range: 2
-                    }
-                }
-            ]
-        },
-        'example.state-generator': {
-            values: [
-                {
-                    key: "name",
-                    name: "Name",
-                    format: "string"
-                },
-                {
-                    key: "utc",
-                    name: "Time",
-                    format: "utc",
-                    hints: {
-                        domain: 1
-                    }
-                },
-                {
-                    key: "local",
-                    name: "Time",
-                    format: "utc",
-                    source: "utc",
-                    hints: {
-                        domain: 2
-                    }
-                },
-                {
-                    key: "state",
-                    source: "value",
-                    name: "State",
-                    format: "enum",
-                    enumerations: [
-                        {
-                            value: 0,
-                            string: "OFF"
-                        },
-                        {
-                            value: 1,
-                            string: "ON"
-                        }
-                    ],
-                    hints: {
-                        range: 1
-                    }
-                },
-                {
-                    key: "value",
-                    name: "Value",
-                    hints: {
-                        range: 2
-                    }
-                }
-            ]
-        }
-    };
-
-    function GeneratorMetadataProvider() {
-
-    }
-
-    GeneratorMetadataProvider.prototype.supportsMetadata = function (domainObject) {
-        return Object.prototype.hasOwnProperty.call(METADATA_BY_TYPE, domainObject.type);
-    };
-
-    GeneratorMetadataProvider.prototype.getMetadata = function (domainObject) {
-        return Object.assign(
-            {},
-            domainObject.telemetry,
-            METADATA_BY_TYPE[domainObject.type]
-        );
-    };
-
-    return GeneratorMetadataProvider;
-
-});

example/generator/GeneratorProvider.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -31,7 +31,6 @@ define([
         period: 10,
         offset: 0,
         dataRateInHz: 1,
-        randomness: 0,
         phase: 0
     };
 
@@ -54,7 +53,6 @@ define([
             'offset',
             'dataRateInHz',
             'phase',
-            'randomness'
         ];
 
         request = request || {};
@@ -62,23 +60,18 @@ define([
         var workerRequest = {};
 
         props.forEach(function (prop) {
-            if (domainObject.telemetry && Object.prototype.hasOwnProperty.call(domainObject.telemetry, prop)) {
+            if (domainObject.telemetry && domainObject.telemetry.hasOwnProperty(prop)) {
                 workerRequest[prop] = domainObject.telemetry[prop];
             }
-
-            if (request && Object.prototype.hasOwnProperty.call(request, prop)) {
+            if (request && request.hasOwnProperty(prop)) {
                 workerRequest[prop] = request[prop];
             }
-
-            if (!Object.prototype.hasOwnProperty.call(workerRequest, prop)) {
+            if (!workerRequest[prop]) {
                 workerRequest[prop] = REQUEST_DEFAULTS[prop];
             }
-
             workerRequest[prop] = Number(workerRequest[prop]);
         });
-
         workerRequest.name = domainObject.name;
-
         return workerRequest;
     };
 
@@ -86,13 +79,11 @@ define([
         var workerRequest = this.makeWorkerRequest(domainObject, request);
         workerRequest.start = request.start;
         workerRequest.end = request.end;
-
         return this.workerInterface.request(workerRequest);
     };
 
     GeneratorProvider.prototype.subscribe = function (domainObject, callback) {
         var workerRequest = this.makeWorkerRequest(domainObject, {});
-
         return this.workerInterface.subscribe(workerRequest, callback);
     };
 

example/generator/SinewaveLimitCapability.js

@@ -0,0 +1,87 @@
+/*****************************************************************************
+ * Open MCT, Copyright (c) 2014-2017, United States Government
+ * as represented by the Administrator of the National Aeronautics and Space
+ * Administration. All rights reserved.
+ *
+ * Open MCT is licensed under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ * http://www.apache.org/licenses/LICENSE-2.0.
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * Open MCT includes source code licensed under additional open source
+ * licenses. See the Open Source Licenses file (LICENSES.md) included with
+ * this source code distribution or the Licensing information page available
+ * at runtime from the About dialog for additional information.
+ *****************************************************************************/
+/*global define*/
+
+define(
+    [],
+    function () {
+        "use strict";
+
+        var RED = 0.9,
+            YELLOW = 0.5,
+            LIMITS = {
+                rh: {
+                    cssClass: "s-limit-upr s-limit-red",
+                    low: RED,
+                    high: Number.POSITIVE_INFINITY,
+                    name: "Red High"
+                },
+                rl: {
+                    cssClass: "s-limit-lwr s-limit-red",
+                    high: -RED,
+                    low: Number.NEGATIVE_INFINITY,
+                    name: "Red Low"
+                },
+                yh: {
+                    cssClass: "s-limit-upr s-limit-yellow",
+                    low: YELLOW,
+                    high: RED,
+                    name: "Yellow High"
+                },
+                yl: {
+                    cssClass: "s-limit-lwr s-limit-yellow",
+                    low: -RED,
+                    high: -YELLOW,
+                    name: "Yellow Low"
+                }
+            };
+
+        function SinewaveLimitCapability(domainObject) {
+            return {
+                limits: function (range) {
+                    return LIMITS;
+                },
+                evaluate: function (datum, range) {
+                    range = range || 'sin';
+                    if (datum[range] > RED) {
+                        return LIMITS.rh;
+                    }
+                    if (datum[range] < -RED) {
+                        return LIMITS.rl;
+                    }
+                    if (datum[range] > YELLOW) {
+                        return LIMITS.yh;
+                    }
+                    if (datum[range] < -YELLOW) {
+                        return LIMITS.yl;
+                    }
+                }
+            };
+        }
+
+        SinewaveLimitCapability.appliesTo = function (model) {
+            return model.type === 'generator';
+        };
+
+        return SinewaveLimitCapability;
+    }
+);

example/generator/SinewaveLimitProvider.js

@@ -1,174 +0,0 @@
-/*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
- * as represented by the Administrator of the National Aeronautics and Space
- * Administration. All rights reserved.
- *
- * Open MCT is licensed under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- * http://www.apache.org/licenses/LICENSE-2.0.
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
- * License for the specific language governing permissions and limitations
- * under the License.
- *
- * Open MCT includes source code licensed under additional open source
- * licenses. See the Open Source Licenses file (LICENSES.md) included with
- * this source code distribution or the Licensing information page available
- * at runtime from the About dialog for additional information.
- *****************************************************************************/
-
-define([
-
-], function (
-
-) {
-
-    var PURPLE = {
-            sin: 2.2,
-            cos: 2.2
-        },
-        RED = {
-            sin: 0.9,
-            cos: 0.9
-        },
-        ORANGE = {
-            sin: 0.7,
-            cos: 0.7
-        },
-        YELLOW = {
-            sin: 0.5,
-            cos: 0.5
-        },
-        CYAN = {
-            sin: 0.45,
-            cos: 0.45
-        },
-        LIMITS = {
-            rh: {
-                cssClass: "is-limit--upr is-limit--red",
-                low: RED,
-                high: Number.POSITIVE_INFINITY,
-                name: "Red High"
-            },
-            rl: {
-                cssClass: "is-limit--lwr is-limit--red",
-                high: -RED,
-                low: Number.NEGATIVE_INFINITY,
-                name: "Red Low"
-            },
-            yh: {
-                cssClass: "is-limit--upr is-limit--yellow",
-                low: YELLOW,
-                high: RED,
-                name: "Yellow High"
-            },
-            yl: {
-                cssClass: "is-limit--lwr is-limit--yellow",
-                low: -RED,
-                high: -YELLOW,
-                name: "Yellow Low"
-            }
-        };
-
-    function SinewaveLimitProvider() {
-
-    }
-
-    SinewaveLimitProvider.prototype.supportsLimits = function (domainObject) {
-        return domainObject.type === 'generator';
-    };
-
-    SinewaveLimitProvider.prototype.getLimitEvaluator = function (domainObject) {
-        return {
-            evaluate: function (datum, valueMetadata) {
-                var range = valueMetadata && valueMetadata.key;
-
-                if (datum[range] > RED[range]) {
-                    return LIMITS.rh;
-                }
-
-                if (datum[range] < -RED[range]) {
-                    return LIMITS.rl;
-                }
-
-                if (datum[range] > YELLOW[range]) {
-                    return LIMITS.yh;
-                }
-
-                if (datum[range] < -YELLOW[range]) {
-                    return LIMITS.yl;
-                }
-            }
-        };
-    };
-
-    SinewaveLimitProvider.prototype.getLimits = function (domainObject) {
-
-        return {
-            limits: function () {
-                return Promise.resolve({
-                    WATCH: {
-                        low: {
-                            color: "cyan",
-                            sin: -CYAN.sin,
-                            cos: -CYAN.cos
-                        },
-                        high: {
-                            color: "cyan",
-                            ...CYAN
-                        }
-                    },
-                    WARNING: {
-                        low: {
-                            color: "yellow",
-                            sin: -YELLOW.sin,
-                            cos: -YELLOW.cos
-                        },
-                        high: {
-                            color: "yellow",
-                            ...YELLOW
-                        }
-                    },
-                    DISTRESS: {
-                        low: {
-                            color: "orange",
-                            sin: -ORANGE.sin,
-                            cos: -ORANGE.cos
-                        },
-                        high: {
-                            color: "orange",
-                            ...ORANGE
-                        }
-                    },
-                    CRITICAL: {
-                        low: {
-                            color: "red",
-                            sin: -RED.sin,
-                            cos: -RED.cos
-                        },
-                        high: {
-                            color: "red",
-                            ...RED
-                        }
-                    },
-                    SEVERE: {
-                        low: {
-                            color: "purple",
-                            sin: -PURPLE.sin,
-                            cos: -PURPLE.cos
-                        },
-                        high: {
-                            color: "purple",
-                            ...PURPLE
-                        }
-                    }
-                });
-            }
-        };
-    };
-
-    return SinewaveLimitProvider;
-});

example/generator/StateGeneratorProvider.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -47,9 +47,7 @@ define([
 
         var interval = setInterval(function () {
             var now = Date.now();
-            var datum = pointForTimestamp(now, duration, domainObject.name);
-            datum.value = String(datum.value);
-            callback(datum);
+            callback(pointForTimestamp(now, duration, domainObject.name));
         }, duration);
 
         return function () {
@@ -57,24 +55,23 @@ define([
         };
     };
 
+
     StateGeneratorProvider.prototype.supportsRequest = function (domainObject, options) {
         return domainObject.type === 'example.state-generator';
     };
 
     StateGeneratorProvider.prototype.request = function (domainObject, options) {
         var start = options.start;
-        var end = Math.min(Date.now(), options.end); // no future values
+        var end = options.end;
         var duration = domainObject.telemetry.duration * 1000;
         if (options.strategy === 'latest' || options.size === 1) {
             start = end;
         }
-
         var data = [];
         while (start <= end && data.length < 5000) {
             data.push(pointForTimestamp(start, duration, domainObject.name));
-            start += duration;
+            start += 5000;
         }
-
         return Promise.resolve(data);
     };
 

example/generator/WorkerInterface.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -21,7 +21,7 @@
  *****************************************************************************/
 
 define([
-    'raw-loader!./generatorWorker.js',
+    'text!./generatorWorker.js',
     'uuid'
 ], function (
     workerText,
@@ -72,16 +72,13 @@ define([
         });
         var messageId;
 
-        let self = this;
         function callback(message) {
             if (message.error) {
                 deferred.reject(message.error);
             } else {
                 deferred.resolve(message.data);
             }
-
-            delete self.callbacks[messageId];
-
+            delete this.callbacks[messageId];
         }
 
         messageId = this.dispatch('request', request, callback.bind(this));
@@ -92,7 +89,7 @@ define([
     WorkerInterface.prototype.subscribe = function (request, cb) {
         function callback(message) {
             cb(message.data);
-        }
+        };
 
         var messageId = this.dispatch('subscribe', request, callback);
 
@@ -104,5 +101,8 @@ define([
         }.bind(this);
     };
 
+
+
+
     return WorkerInterface;
 });

example/generator/generatorWorker.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -20,6 +20,8 @@
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
 
+/*global self*/
+
 (function () {
 
     var FIFTEEN_MINUTES = 15 * 60 * 1000;
@@ -54,38 +56,22 @@
         var start = Date.now();
         var step = 1000 / data.dataRateInHz;
         var nextStep = start - (start % step) + step;
-        let work;
-        if (data.spectra) {
-            work = function (now) {
-                while (nextStep < now) {
-                    const messageCopy = Object.create(message);
-                    message.data.start = nextStep - (60 * 1000);
-                    message.data.end = nextStep;
-                    onRequest(messageCopy);
-                    nextStep += step;
-                }
 
-                return nextStep;
-            };
-        } else {
-            work = function (now) {
-                while (nextStep < now) {
-                    self.postMessage({
-                        id: message.id,
-                        data: {
-                            name: data.name,
-                            utc: nextStep,
-                            yesterday: nextStep - 60 * 60 * 24 * 1000,
-                            sin: sin(nextStep, data.period, data.amplitude, data.offset, data.phase, data.randomness),
-                            wavelength: wavelength(start, nextStep),
-                            cos: cos(nextStep, data.period, data.amplitude, data.offset, data.phase, data.randomness)
-                        }
-                    });
-                    nextStep += step;
-                }
-
-                return nextStep;
-            };
+        function work(now) {
+            while (nextStep < now) {
+                self.postMessage({
+                    id: message.id,
+                    data: {
+                        name: data.name,
+                        utc: nextStep,
+                        yesterday: nextStep - 60*60*24*1000,
+                        sin: sin(nextStep, data.period, data.amplitude, data.offset, data.phase),
+                        cos: cos(nextStep, data.period, data.amplitude, data.offset, data.phase)
+                    }
+                });
+                nextStep += step;
+            }
+            return nextStep;
         }
 
         subscriptions[message.id] = work;
@@ -98,11 +84,10 @@
 
     function onRequest(message) {
         var request = message.data;
-        if (request.end === undefined) {
+        if (request.end == undefined) {
             request.end = Date.now();
         }
-
-        if (request.start === undefined) {
+        if (request.start == undefined){
             request.start = request.end - FIFTEEN_MINUTES;
         }
 
@@ -114,7 +99,6 @@
         var offset = request.offset;
         var dataRateInHz = request.dataRateInHz;
         var phase = request.phase;
-        var randomness = request.randomness;
 
         var step = 1000 / dataRateInHz;
         var nextStep = start - (start % step) + step;
@@ -123,39 +107,27 @@
 
         for (; nextStep < end && data.length < 5000; nextStep += step) {
             data.push({
+                name: request.name,
                 utc: nextStep,
-                yesterday: nextStep - 60 * 60 * 24 * 1000,
-                sin: sin(nextStep, period, amplitude, offset, phase, randomness),
-                wavelength: wavelength(start, nextStep),
-                cos: cos(nextStep, period, amplitude, offset, phase, randomness)
+                yesterday: nextStep - 60*60*24*1000,
+                sin: sin(nextStep, period, amplitude, offset, phase),
+                cos: cos(nextStep, period, amplitude, offset, phase)
             });
         }
-
         self.postMessage({
             id: message.id,
-            data: request.spectra ? {
-                wavelength: data.map((item) => {
-                    return item.wavelength;
-                }),
-                cos: data.map((item) => {
-                    return item.cos;
-                })
-            } : data
+            data: data
         });
     }
 
-    function cos(timestamp, period, amplitude, offset, phase, randomness) {
-        return amplitude
-            * Math.cos(phase + (timestamp / period / 1000 * Math.PI * 2)) + (amplitude * Math.random() * randomness) + offset;
+    function cos(timestamp, period, amplitude, offset, phase) {
+        return amplitude *
+            Math.cos(phase + (timestamp / period / 1000 * Math.PI * 2)) + offset;
     }
 
-    function sin(timestamp, period, amplitude, offset, phase, randomness) {
-        return amplitude
-            * Math.sin(phase + (timestamp / period / 1000 * Math.PI * 2)) + (amplitude * Math.random() * randomness) + offset;
-    }
-
-    function wavelength(start, nextStep) {
-        return (nextStep - start) / 10;
+    function sin(timestamp, period, amplitude, offset, phase) {
+        return amplitude *
+            Math.sin(phase + (timestamp / period / 1000 * Math.PI * 2)) + offset;
     }
 
     function sendError(error, message) {

example/generator/plugin.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,43 +19,99 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define([
     "./GeneratorProvider",
-    "./SinewaveLimitProvider",
-    "./StateGeneratorProvider",
-    "./GeneratorMetadataProvider"
+    "./SinewaveLimitCapability",
+    "./StateGeneratorProvider"
 ], function (
     GeneratorProvider,
-    SinewaveLimitProvider,
-    StateGeneratorProvider,
-    GeneratorMetadataProvider
+    SinewaveLimitCapability,
+    StateGeneratorProvider
 ) {
 
-    return function (openmct) {
+    var legacyExtensions = {
+        "capabilities": [
+            {
+                "key": "limit",
+                "implementation": SinewaveLimitCapability
+            }
+        ]
+    };
+
+    return function(openmct){
+        //Register legacy extensions for things not yet supported by the new API
+        Object.keys(legacyExtensions).forEach(function (type){
+            var extensionsOfType = legacyExtensions[type];
+            extensionsOfType.forEach(function (extension) {
+                openmct.legacyExtension(type, extension)
+            })
+        });
 
         openmct.types.addType("example.state-generator", {
             name: "State Generator",
             description: "For development use.  Generates test enumerated telemetry by cycling through a given set of states",
-            cssClass: "icon-generator-telemetry",
+            cssClass: "icon-telemetry",
             creatable: true,
             form: [
                 {
                     name: "State Duration (seconds)",
-                    control: "numberfield",
+                    control: "textfield",
                     cssClass: "l-input-sm l-numeric",
                     key: "duration",
                     required: true,
                     property: [
                         "telemetry",
                         "duration"
-                    ]
+                    ],
+                    pattern: "^\\d*(\\.\\d*)?$"
                 }
             ],
             initialize: function (object) {
                 object.telemetry = {
-                    duration: 5
-                };
+                    duration: 5,
+                    values: [
+                        {
+                            key: "name",
+                            name: "Name"
+                        },
+                        {
+                            key: "utc",
+                            name: "Time",
+                            format: "utc",
+                            hints: {
+                                domain: 1
+                            }
+                        },
+                        {
+                            key: "state",
+                            source: "value",
+                            name: "State",
+                            format: "enum",
+                            enumerations: [
+                                {
+                                    value: 0,
+                                    string: "OFF"
+                                },
+                                {
+                                    value: 1,
+                                    string: "ON"
+                                }
+                            ],
+                            hints: {
+                                range: 1
+                            }
+                        },
+                        {
+                            key: "value",
+                            name: "Value",
+                            hints: {
+                                range: 2
+                            }
+                        }
+                    ]
+                }
             }
         });
 
@@ -64,74 +120,68 @@ define([
         openmct.types.addType("generator", {
             name: "Sine Wave Generator",
             description: "For development use. Generates example streaming telemetry data using a simple sine wave algorithm.",
-            cssClass: "icon-generator-telemetry",
+            cssClass: "icon-telemetry",
             creatable: true,
             form: [
                 {
                     name: "Period",
-                    control: "numberfield",
+                    control: "textfield",
                     cssClass: "l-input-sm l-numeric",
                     key: "period",
                     required: true,
                     property: [
                         "telemetry",
                         "period"
-                    ]
+                    ],
+                    pattern: "^\\d*(\\.\\d*)?$"
                 },
                 {
                     name: "Amplitude",
-                    control: "numberfield",
+                    control: "textfield",
                     cssClass: "l-input-sm l-numeric",
                     key: "amplitude",
                     required: true,
                     property: [
                         "telemetry",
                         "amplitude"
-                    ]
+                    ],
+                    pattern: "^\\d*(\\.\\d*)?$"
                 },
                 {
                     name: "Offset",
-                    control: "numberfield",
+                    control: "textfield",
                     cssClass: "l-input-sm l-numeric",
                     key: "offset",
                     required: true,
                     property: [
                         "telemetry",
                         "offset"
-                    ]
+                    ],
+                    pattern: "^\\d*(\\.\\d*)?$"
                 },
                 {
                     name: "Data Rate (hz)",
-                    control: "numberfield",
+                    control: "textfield",
                     cssClass: "l-input-sm l-numeric",
                     key: "dataRateInHz",
                     required: true,
                     property: [
                         "telemetry",
                         "dataRateInHz"
-                    ]
+                    ],
+                    pattern: "^\\d*(\\.\\d*)?$"
                 },
                 {
                     name: "Phase (radians)",
-                    control: "numberfield",
+                    control: "textfield",
                     cssClass: "l-input-sm l-numeric",
                     key: "phase",
                     required: true,
                     property: [
                         "telemetry",
                         "phase"
-                    ]
-                },
-                {
-                    name: "Randomness",
-                    control: "numberfield",
-                    cssClass: "l-input-sm l-numeric",
-                    key: "randomness",
-                    required: true,
-                    property: [
-                        "telemetry",
-                        "randomness"
-                    ]
+                    ],
+                    pattern: "^\\d*(\\.\\d*)?$"
                 }
             ],
             initialize: function (object) {
@@ -141,14 +191,47 @@ define([
                     offset: 0,
                     dataRateInHz: 1,
                     phase: 0,
-                    randomness: 0
+                    values: [
+                        {
+                            key: "name",
+                            name: "Name"
+                        },
+                        {
+                            key: "utc",
+                            name: "Time",
+                            format: "utc",
+                            hints: {
+                                domain: 1
+                            }
+                        },
+                        {
+                            key: "yesterday",
+                            name: "Yesterday",
+                            format: "utc",
+                            hints: {
+                                domain: 2
+                            }
+                        },
+                        {
+                            key: "sin",
+                            name: "Sine",
+                            hints: {
+                                range: 1
+                            }
+                        },
+                        {
+                            key: "cos",
+                            name: "Cosine",
+                            hints: {
+                                range: 2
+                            }
+                        }
+                    ]
                 };
             }
         });
 
         openmct.telemetry.addProvider(new GeneratorProvider());
-        openmct.telemetry.addProvider(new GeneratorMetadataProvider());
-        openmct.telemetry.addProvider(new SinewaveLimitProvider());
     };
 
 });

example/identity/bundle.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,30 +19,29 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define([
-    "./src/ExampleIdentityService"
+    "./src/ExampleIdentityService",
+    'legacyRegistry'
 ], function (
-    ExampleIdentityService
+    ExampleIdentityService,
+    legacyRegistry
 ) {
     "use strict";
 
-    return {
-        name: "example/identity",
-        definition: {
-            "extensions": {
-                "components": [
-                    {
-                        "implementation": ExampleIdentityService,
-                        "provides": "identityService",
-                        "type": "provider",
-                        "depends": [
-                            "dialogService",
-                            "$q"
-                        ]
-                    }
-                ]
-            }
+    legacyRegistry.register("example/identity", {
+        "extensions": {
+            "components": [
+                {
+                    "implementation": ExampleIdentityService,
+                    "provides": "identityService",
+                    "type": "provider",
+                    "depends": [
+                        "dialogService"
+                    ]
+                }
+            ]
         }
-    };
+    });
 });

example/identity/src/ExampleIdentityService.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,35 +19,32 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define(
     function () {
         "use strict";
 
-        var DEFAULT_IDENTITY = {
-                key: "user",
-                name: "Example User"
-            },
+        var DEFAULT_IDENTITY = { key: "user", name: "Example User" },
             DIALOG_STRUCTURE = {
                 name: "Identify Yourself",
-                sections: [{
-                    rows: [
-                        {
-                            name: "User ID",
-                            control: "textfield",
-                            key: "key",
-                            required: true
-                        },
-                        {
-                            name: "Human name",
-                            control: "textfield",
-                            key: "name",
-                            required: true
-                        }
-                    ]
-                }]
+                sections: [{ rows: [
+                    {
+                        name: "User ID",
+                        control: "textfield",
+                        key: "key",
+                        required: true
+                    },
+                    {
+                        name: "Human name",
+                        control: "textfield",
+                        key: "name",
+                        required: true
+                    }
+                ]}]
             };
 
+
         /**
          * Example implementation of an identity service. This prompts the
          * user to enter a name and user ID; in a more realistic
@@ -58,35 +55,19 @@ define(
          * @implements {IdentityService}
          * @memberof platform/identity
          */
-        function ExampleIdentityProvider(dialogService, $q) {
-            this.dialogService = dialogService;
-            this.$q = $q;
+        function ExampleIdentityProvider(dialogService) {
+            // Handle rejected dialog messages by treating the
+            // current user as undefined.
+            function echo(v) { return v; }
+            function giveUndefined() { return undefined; }
 
-            this.returnUser = this.returnUser.bind(this);
-            this.returnUndefined = this.returnUndefined.bind(this);
+            this.userPromise =
+                dialogService.getUserInput(DIALOG_STRUCTURE, DEFAULT_IDENTITY)
+                    .then(echo, giveUndefined);
         }
 
         ExampleIdentityProvider.prototype.getUser = function () {
-            if (this.user) {
-                return this.$q.when(this.user);
-            } else {
-                return this.dialogService.getUserInput(DIALOG_STRUCTURE, DEFAULT_IDENTITY)
-                    .then(this.returnUser, this.returnUndefined);
-            }
-        };
-
-        /**
-         * @private
-         */
-        ExampleIdentityProvider.prototype.returnUser = function (user) {
-            return this.user = user;
-        };
-
-        /**
-         * @private
-         */
-        ExampleIdentityProvider.prototype.returnUndefined = function () {
-            return undefined;
+            return this.userPromise;
         };
 
         return ExampleIdentityProvider;

example/imagery/plugin.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -20,219 +20,126 @@
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
 
-const DEFAULT_IMAGE_SAMPLES = [
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18731.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18732.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18733.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18734.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18735.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18736.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18737.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18738.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18739.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18740.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18741.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18742.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18743.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18744.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18745.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18746.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18747.jpg",
-    "https://www.hq.nasa.gov/alsj/a16/AS16-117-18748.jpg"
-];
-const DEFAULT_IMAGE_LOAD_DELAY_IN_MILISECONDS = 20000;
-const MIN_IMAGE_LOAD_DELAY_IN_MILISECONDS = 5000;
+define([
 
-let openmctInstance;
+], function(
 
-export default function () {
-    return function install(openmct) {
-        openmctInstance = openmct;
-        openmct.types.addType('example.imagery', {
-            key: 'example.imagery',
-            name: 'Example Imagery',
-            cssClass: 'icon-image',
-            description: 'For development use. Creates example imagery '
-                + 'data that mimics a live imagery stream.',
-            creatable: true,
-            initialize: (object) => {
-                object.configuration = {
-                    imageLocation: '',
-                    imageLoadDelayInMilliSeconds: DEFAULT_IMAGE_LOAD_DELAY_IN_MILISECONDS,
-                    imageSamples: []
-                };
+) {
+    function ImageryPlugin() {
 
-                object.telemetry = {
-                    values: [
-                        {
-                            name: 'Name',
-                            key: 'name'
-                        },
-                        {
-                            name: 'Time',
-                            key: 'utc',
-                            format: 'utc',
-                            hints: {
-                                domain: 2
-                            }
-                        },
-                        {
-                            name: 'Local Time',
-                            key: 'local',
-                            format: 'local-format',
-                            hints: {
-                                domain: 1
-                            }
-                        },
-                        {
-                            name: 'Image',
-                            key: 'url',
-                            format: 'image',
-                            hints: {
-                                image: 1
-                            }
-                        },
-                        {
-                            name: 'Image Download Name',
-                            key: 'imageDownloadName',
-                            format: 'imageDownloadName',
-                            hints: {
-                                imageDownloadName: 1
-                            }
-                        }
-                    ]
-                };
-            },
-            form: [
-                {
-                    key: 'imageLocation',
-                    name: 'Images url list (comma separated)',
-                    control: 'textarea',
-                    cssClass: 'l-inline',
-                    property: [
-                        "configuration",
-                        "imageLocation"
-                    ]
-                },
-                {
-                    key: 'imageLoadDelayInMilliSeconds',
-                    name: 'Image load delay (milliseconds)',
-                    control: 'numberfield',
-                    required: true,
-                    cssClass: 'l-inline',
-                    property: [
-                        "configuration",
-                        "imageLoadDelayInMilliSeconds"
-                    ]
-                }
-            ]
-        });
+        var IMAGE_SAMPLES = [
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18731.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18732.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18733.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18734.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18735.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18736.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18737.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18738.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18739.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18740.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18741.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18742.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18743.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18744.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18745.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18746.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18747.jpg",
+                "https://www.hq.nasa.gov/alsj/a16/AS16-117-18748.jpg"
+            ];
 
-        openmct.telemetry.addProvider(getRealtimeProvider());
-        openmct.telemetry.addProvider(getHistoricalProvider());
-        openmct.telemetry.addProvider(getLadProvider());
-    };
-}
-
-function getCompassValues(min, max) {
-    return min + Math.random() * (max - min);
-}
-
-function getImageSamples(configuration) {
-    let imageSamples = DEFAULT_IMAGE_SAMPLES;
-
-    if (configuration.imageLocation && configuration.imageLocation.length) {
-        imageSamples = getImageUrlListFromConfig(configuration);
-    }
-
-    return imageSamples;
-}
-
-function getImageUrlListFromConfig(configuration) {
-    return configuration.imageLocation.split(',');
-}
-
-function getImageLoadDelay(domainObject) {
-    const imageLoadDelay = domainObject.configuration.imageLoadDelayInMilliSeconds;
-    if (!imageLoadDelay) {
-        openmctInstance.objects.mutate(domainObject, 'configuration.imageLoadDelayInMilliSeconds', DEFAULT_IMAGE_LOAD_DELAY_IN_MILISECONDS);
-
-        return DEFAULT_IMAGE_LOAD_DELAY_IN_MILISECONDS;
-    }
-
-    if (imageLoadDelay < MIN_IMAGE_LOAD_DELAY_IN_MILISECONDS) {
-        openmctInstance.objects.mutate(domainObject, 'configuration.imageLoadDelayInMilliSeconds', MIN_IMAGE_LOAD_DELAY_IN_MILISECONDS);
-
-        return MIN_IMAGE_LOAD_DELAY_IN_MILISECONDS;
-    }
-
-    return imageLoadDelay;
-}
-
-function getRealtimeProvider() {
-    return {
-        supportsSubscribe: domainObject => domainObject.type === 'example.imagery',
-        subscribe: (domainObject, callback) => {
-            const delay = getImageLoadDelay(domainObject);
-            const interval = setInterval(() => {
-                callback(pointForTimestamp(Date.now(), domainObject.name, getImageSamples(domainObject.configuration), delay));
-            }, delay);
-
-            return () => {
-                clearInterval(interval);
+        function pointForTimestamp(timestamp, name) {
+            return {
+                name: name,
+                utc: Math.floor(timestamp / 5000) * 5000,
+                url: IMAGE_SAMPLES[Math.floor(timestamp / 5000) % IMAGE_SAMPLES.length]
             };
         }
-    };
-}
 
-function getHistoricalProvider() {
-    return {
-        supportsRequest: (domainObject, options) => {
-            return domainObject.type === 'example.imagery'
-                && options.strategy !== 'latest';
-        },
-        request: (domainObject, options) => {
-            const delay = getImageLoadDelay(domainObject);
-            let start = options.start;
-            const end = Math.min(options.end, Date.now());
-            const data = [];
-            while (start <= end && data.length < delay) {
-                data.push(pointForTimestamp(start, domainObject.name, getImageSamples(domainObject.configuration), delay));
-                start += delay;
+        var realtimeProvider = {
+            supportsSubscribe: function (domainObject) {
+                return domainObject.type === 'example.imagery';
+            },
+            subscribe: function (domainObject, callback) {
+                var interval = setInterval(function () {
+                    callback(pointForTimestamp(Date.now(), domainObject.name));
+                }, 5000);
+
+                return function (interval) {
+                    clearInterval(interval);
+                };
             }
+        };
 
-            return Promise.resolve(data);
-        }
-    };
-}
+        var historicalProvider = {
+            supportsRequest: function (domainObject, options) {
+                return domainObject.type === 'example.imagery'
+                    && options.strategy !== 'latest';
+            },
+            request: function (domainObject, options) {
+                var start = options.start;
+                var end = options.end;
+                var data = [];
+                while (start <= end && data.length < 5000) {
+                    data.push(pointForTimestamp(start, domainObject.name));
+                    start += 5000;
+                }
+                return Promise.resolve(data);
+            }
+        };
 
-function getLadProvider() {
-    return {
-        supportsRequest: (domainObject, options) => {
-            return domainObject.type === 'example.imagery'
-                && options.strategy === 'latest';
-        },
-        request: (domainObject, options) => {
-            const delay = getImageLoadDelay(domainObject);
+        var ladProvider = {
+            supportsRequest: function (domainObject, options) {
+                return domainObject.type === 'example.imagery' &&
+                    options.strategy === 'latest';
+            },
+            request: function (domainObject, options) {
+                return Promise.resolve([pointForTimestamp(Date.now(), domainObject.name)]);
+            }
+        };
 
-            return Promise.resolve([pointForTimestamp(Date.now(), domainObject.name, delay)]);
-        }
-    };
-}
 
-function pointForTimestamp(timestamp, name, imageSamples, delay) {
-    const url = imageSamples[Math.floor(timestamp / delay) % imageSamples.length];
-    const urlItems = url.split('/');
-    const imageDownloadName = `example.imagery.${urlItems[urlItems.length - 1]}`;
+        return function install(openmct) {
+            openmct.types.addType('example.imagery', {
+                key: 'example.imagery',
+                name: 'Example Imagery',
+                cssClass: 'icon-image',
+                description: 'For development use. Creates example imagery ' +
+                    'data that mimics a live imagery stream.',
+                creatable: true,
+                initialize: function (object) {
+                    object.telemetry = {
+                        values: [
+                            {
+                                name: 'Name',
+                                key: 'name'
+                            },
+                            {
+                                name: 'Time',
+                                key: 'utc',
+                                format: 'utc',
+                                hints: {
+                                    domain: 1
+                                }
+                            },
+                            {
+                                name: 'Image',
+                                key: 'url',
+                                format: 'image',
+                                hints: {
+                                    image: 1
+                                }
+                            }
+                        ]
+                    }
+                }
+            });
 
-    return {
-        name,
-        utc: Math.floor(timestamp / delay) * delay,
-        local: Math.floor(timestamp / delay) * delay,
-        url,
-        sunOrientation: getCompassValues(0, 360),
-        cameraPan: getCompassValues(0, 360),
-        heading: getCompassValues(0, 360),
-        imageDownloadName
-    };
-}
+            openmct.telemetry.addProvider(realtimeProvider);
+            openmct.telemetry.addProvider(historicalProvider);
+            openmct.telemetry.addProvider(ladProvider);
+        };
+    }
+
+    return ImageryPlugin;
+});

example/mobile/bundle.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,23 +19,27 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
-define([], function () {
+define([
+    
+    'legacyRegistry'
+], function (
+    
+    legacyRegistry
+) {
     "use strict";
 
-    return {
-        name: "example/mobile",
-        definition: {
-            "name": "Mobile",
-            "description": "Allows elements with pertinence to mobile usage and development",
-            "extensions": {
-                "stylesheets": [
-                    {
-                        "stylesheetUrl": "css/mobile-example.css",
-                        "priority": "mandatory"
-                    }
-                ]
-            }
+    legacyRegistry.register("example/mobile", {
+        "name": "Mobile",
+        "description": "Allows elements with pertinence to mobile usage and development",
+        "extensions": {
+            "stylesheets": [
+                {
+                    "stylesheetUrl": "css/mobile-example.css",
+                    "priority": "mandatory"
+                }
+            ]
         }
-    };
+    });
 });

example/mobile/res/sass/mobile-example.scss

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *

example/msl/bundle.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,97 +19,97 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define([
     "./src/RemsTelemetryServerAdapter",
     "./src/RemsTelemetryModelProvider",
-    "./src/RemsTelemetryProvider"
+    "./src/RemsTelemetryProvider",
+    'legacyRegistry',
+    "module"
 ], function (
     RemsTelemetryServerAdapter,
     RemsTelemetryModelProvider,
-    RemsTelemetryProvider
+    RemsTelemetryProvider,
+    legacyRegistry
 ) {
     "use strict";
-
-    return {
-        name: "example/msl",
-        definition: {
-            "name": "Mars Science Laboratory Data Adapter",
-            "extensions": {
-                "types": [
-                    {
+    legacyRegistry.register("example/msl", {
+        "name" : "Mars Science Laboratory Data Adapter",
+        "extensions" : {
+            "types": [
+                {
+                    "name":"Mars Science Laboratory",
+                    "key": "msl.curiosity",
+                    "cssClass": "icon-object"
+                },
+                {
+                    "name": "Instrument",
+                    "key": "msl.instrument",
+                    "cssClass": "icon-object",
+                    "model": {"composition": []}
+                },
+                {
+                    "name": "Measurement",
+                    "key": "msl.measurement",
+                    "cssClass": "icon-telemetry",
+                    "model": {"telemetry": {}},
+                    "telemetry": {
+                        "source": "rems.source",
+                        "domains": [
+                            {
+                                "name": "Time",
+                                "key": "utc",
+                                "format": "utc"
+                            }
+                        ]
+                    }
+                }
+            ],
+            "constants": [
+                {
+                    "key": "REMS_WS_URL",
+                    "value": "/proxyUrl?url=http://cab.inta-csic.es/rems/wp-content/plugins/marsweather-widget/api.php"
+                }
+            ],
+            "roots": [
+                {
+                    "id": "msl:curiosity"
+                }
+            ],
+            "models": [
+                {
+                    "id": "msl:curiosity",
+                    "priority": "preferred",
+                    "model": {
+                        "type": "msl.curiosity",
                         "name": "Mars Science Laboratory",
-                        "key": "msl.curiosity",
-                        "cssClass": "icon-object"
-                    },
-                    {
-                        "name": "Instrument",
-                        "key": "msl.instrument",
-                        "cssClass": "icon-object",
-                        "model": {"composition": []}
-                    },
-                    {
-                        "name": "Measurement",
-                        "key": "msl.measurement",
-                        "cssClass": "icon-telemetry",
-                        "model": {"telemetry": {}},
-                        "telemetry": {
-                            "source": "rems.source",
-                            "domains": [
-                                {
-                                    "name": "Time",
-                                    "key": "utc",
-                                    "format": "utc"
-                                }
-                            ]
-                        }
+                        "composition": ["msl_tlm:rems"]
                     }
-                ],
-                "constants": [
-                    {
-                        "key": "REMS_WS_URL",
-                        "value": "/proxyUrl?url=http://cab.inta-csic.es/rems/wp-content/plugins/marsweather-widget/api.php"
-                    }
-                ],
-                "roots": [
-                    {
-                        "id": "msl:curiosity"
-                    }
-                ],
-                "models": [
-                    {
-                        "id": "msl:curiosity",
-                        "priority": "preferred",
-                        "model": {
-                            "type": "msl.curiosity",
-                            "name": "Mars Science Laboratory",
-                            "composition": ["msl_tlm:rems"]
-                        }
-                    }
-                ],
-                "services": [
-                    {
-                        "key": "rems.adapter",
-                        "implementation": RemsTelemetryServerAdapter,
-                        "depends": ["$http", "$log", "REMS_WS_URL"]
-                    }
-                ],
-                "components": [
-                    {
-                        "provides": "modelService",
-                        "type": "provider",
-                        "implementation": RemsTelemetryModelProvider,
-                        "depends": ["rems.adapter"]
-                    },
-                    {
-                        "provides": "telemetryService",
-                        "type": "provider",
-                        "implementation": RemsTelemetryProvider,
-                        "depends": ["rems.adapter", "$q"]
-                    }
-                ]
-            }
+                }
+            ],
+            "services": [
+                {
+                    "key":"rems.adapter",
+                    "implementation": RemsTelemetryServerAdapter,
+                    "depends": ["$http", "$log", "REMS_WS_URL"]
+                }
+            ],
+            "components": [
+                {
+                    "provides": "modelService",
+                    "type": "provider",
+                    "implementation": RemsTelemetryModelProvider,
+                    "depends": ["rems.adapter"]
+                },
+                {
+                    "provides": "telemetryService",
+                    "type": "provider",
+                    "implementation": RemsTelemetryProvider,
+                    "depends": ["rems.adapter", "$q"]
+                }
+            ]
         }
-    };
+    });
 });
 

example/msl/src/MSLDataDictionary.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,6 +19,7 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define(
     [],
@@ -37,7 +38,7 @@ define(
             "identifier": "msl",
             "instruments": [
                 {
-                    "name": "rems",
+                    "name":"rems",
                     "identifier": "rems",
                     "measurements": [
                         {
@@ -75,4 +76,4 @@ define(
             ]
         };
     }
-);
+);

example/msl/src/RemsTelemetryModelProvider.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,9 +19,10 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define*/
 
 define(
-    function () {
+    function (){
         "use strict";
 
         var PREFIX = "msl_tlm:",
@@ -31,20 +32,20 @@ define(
                 string: "string"
             };
 
-        function RemsTelemetryModelProvider(adapter) {
+        function RemsTelemetryModelProvider(adapter){
 
             function isRelevant(id) {
                 return id.indexOf(PREFIX) === 0;
             }
 
-            function makeId(element) {
+            function makeId(element){
                 return PREFIX + element.identifier;
             }
 
-            function buildTaxonomy(dictionary) {
+            function buildTaxonomy(dictionary){
                 var models = {};
 
-                function addMeasurement(measurement, parent) {
+                function addMeasurement(measurement, parent){
                     var format = FORMAT_MAPPINGS[measurement.type];
                     models[makeId(measurement)] = {
                         type: "msl.measurement",
@@ -72,15 +73,14 @@ define(
                         location: spacecraftId,
                         composition: measurements.map(makeId)
                     };
-                    measurements.forEach(function (measurement) {
+                    measurements.forEach(function(measurement) {
                         addMeasurement(measurement, instrumentId);
                     });
                 }
 
-                (dictionary.instruments || []).forEach(function (instrument) {
+                (dictionary.instruments || []).forEach(function(instrument) {
                     addInstrument(instrument, "msl:curiosity");
                 });
-
                 return models;
             }
 
@@ -90,7 +90,6 @@ define(
                 }
             };
         }
-
         return RemsTelemetryModelProvider;
     }
 );

example/msl/src/RemsTelemetryProvider.js

@@ -1,5 +1,5 @@
 /*****************************************************************************
- * Open MCT, Copyright (c) 2014-2021, United States Government
+ * Open MCT, Copyright (c) 2014-2017, United States Government
  * as represented by the Administrator of the National Aeronautics and Space
  * Administration. All rights reserved.
  *
@@ -19,6 +19,7 @@
  * this source code distribution or the Licensing information page available
  * at runtime from the About dialog for additional information.
  *****************************************************************************/
+/*global define */
 define (
     ['./RemsTelemetrySeries'],
     function (RemsTelemetrySeries) {
@@ -71,11 +72,10 @@ define (
          * This data source does not support real-time subscriptions
          */
         RemsTelemetryProvider.prototype.subscribe = function (callback, requests) {
-            return function () {};
+            return function() {};
         };
-
         RemsTelemetryProvider.prototype.unsubscribe = function (callback, requests) {
-            return function () {};
+            return function() {};
         };
 
         return RemsTelemetryProvider;