// If you are using an Adafruit, Yourduino, RFRobot, YWRobot, or SainSmart display, you must also change the feature setting in rotator_k3ngdisplay.h!!!!
// #define FEATURE_ADAFRUIT_BUTTONS // Uncomment this to use Adafruit I2C LCD buttons for manual AZ/EL instead of normal buttons (also set this feature in rotator_k3ngdisplay.h)
//#define FEATURE_AZ_PRESET_ENCODER // Uncomment for Rotary Encoder Azimuth Preset support
//#define FEATURE_EL_PRESET_ENCODER // Uncomment for Rotary Encoder Elevation Preset support (requires FEATURE_AZ_PRESET_ENCODER above)
#define OPTION_ENCODER_HALF_STEP_MODE
#define OPTION_ENCODER_ENABLE_PULLUPS // define to enable weak pullups on rotary encoder pins
#define OPTION_INCREMENTAL_ENCODER_PULLUPS // define to enable weak pullups on 3 phase incremental rotary encoder pins
//#define OPTION_PRESET_ENCODER_RELATIVE_CHANGE // this makes the encoder(s) change the az or el in a relative fashion rather then store an absolute setting
#define OPTION_PRESET_ENCODER_0_360_DEGREES
/* position sensor options */
#define OPTION_AZ_POSITION_ROTARY_ENCODER_HARD_LIMIT // stop azimuth at lower and upper limit rather than rolling over
#define OPTION_EL_POSITION_ROTARY_ENCODER_HARD_LIMIT // stop elevation at lower and upper limits rather than rolling over
#define OPTION_AZ_POSITION_PULSE_HARD_LIMIT // stop azimuth at lower and upper limit rather than rolling over
#define OPTION_EL_POSITION_PULSE_HARD_LIMIT // stop elevation at lower and upper limits rather than rolling over
#define OPTION_POSITION_PULSE_INPUT_PULLUPS // define to enable weak pullups on position pulse inputs
/* less often used features and options */
#define OPTION_GS_232B_EMULATION // comment this out to default to Yaesu GS-232A emulation when using FEATURE_YAESU_EMULATION above
//#define FEATURE_ROTATION_INDICATOR_PIN // activate rotation_indication_pin to indicate rotation
//#define FEATURE_LIMIT_SENSE
//#define FEATURE_TIMED_BUFFER // Support for Yaesu timed buffer commands
//#define OPTION_SERIAL_HELP_TEXT // Yaesu help command prints help
//#define FEATURE_PARK
//#define OPTION_AZ_MANUAL_ROTATE_LIMITS // this option will automatically stop the L and R commands when hitting a CCW or CW limit (settings below - AZ_MANUAL_ROTATE_*_LIMIT)
//#define OPTION_EL_MANUAL_ROTATE_LIMITS
#define OPTION_EASYCOM_AZ_QUERY_COMMAND // Adds non-standard Easycom command: AZ with no parm returns current azimuth
#define OPTION_EASYCOM_EL_QUERY_COMMAND // Adds non-standard Easycom command: EL with no parm returns current elevation
//#define OPTION_C_COMMAND_SENDS_AZ_AND_EL // uncomment this when using Yaesu emulation with Ham Radio Deluxe
//#define OPTION_DELAY_C_CMD_OUTPUT // uncomment this when using Yaesu emulation with Ham Radio Deluxe
#define FEATURE_ONE_DECIMAL_PLACE_HEADINGS
//#define FEATURE_TWO_DECIMAL_PLACE_HEADINGS // under development - not working yet!
//#define FEATURE_AZIMUTH_CORRECTION // correct the azimuth using a calibration table in rotator_settings.h
//#define FEATURE_ELEVATION_CORRECTION // correct the elevation using a calibration table in rotator_settings.h
//#define FEATURE_ANCILLARY_PIN_CONTROL // control I/O pins with serial commands \F, \N, \P
//#define FEATURE_JOYSTICK_CONTROL // analog joystick support
//#define OPTION_JOYSTICK_REVERSE_X_AXIS
//#define OPTION_JOYSTICK_REVERSE_Y_AXIS
#define OPTION_EL_SPEED_FOLLOWS_AZ_SPEED // changing the azimith speed with Yaesu X commands or an azimuth speed pot will also change elevation speed
//#define OPTION_PULSE_IGNORE_AMBIGUOUS_PULSES // for azimuth and elevation position pulse input feature, ignore pulses that arrive when no rotation is active
//#define OPTION_BUTTON_RELEASE_NO_SLOWDOWN // disables slowdown when CW or CCW button is released, or stop button is depressed
#define OPTION_SYNC_RTC_TO_GPS // if both realtime clock and GPS are present, synchronize realtime clock to GPS
//#define OPTION_DISPLAY_HHMM_CLOCK // display HH:MM clock on LCD row 1 (set position with #define LCD_HHMM_CLOCK_POSITION)
#define OPTION_DISPLAY_HHMMSS_CLOCK // display HH:MM:SS clock on LCD row 1 (set position with #define LCD_HHMMSS_CLOCK_POSITION)
//#define OPTION_DISPLAY_ALT_HHMM_CLOCK_AND_MAIDENHEAD // display alternating HH:MM clock and maidenhead on LCD row 1 (set position with #define LCD_HHMMCLOCK_POSITION)
//#define OPTION_DISPLAY_CONSTANT_HHMMSS_CLOCK_AND_MAIDENHEAD // display constant HH:MM:SS clock and maidenhead on LCD row 1 (set position with #define LCD_CONSTANT_HHMMSSCLOCK_MAIDENHEAD_POSITION)
//#define OPTION_DISPLAY_BIG_CLOCK // display date & time clock (set row with #define LCD_BIG_CLOCK_ROW)
//#define OPTION_DISPLAY_VERSION_ON_STARTUP //code provided by Paolo, IT9IPQ
//#define FEATURE_POWER_SWITCH
//#define OPTION_EXTERNAL_ANALOG_REFERENCE //Activate external analog voltage reference (needed for RemoteQTH.com unit)
//#define OPTION_SYNC_MASTER_CLOCK_TO_SLAVE // use when GPS unit is connected to slave unit and you want to synchronize the master unit clock to the slave unit GPS clock
//#define OPTION_SYNC_MASTER_COORDINATES_TO_SLAVE // use when GPS unit is connected to slave unit and you want to synchronize the master unit coordinates to the slave unit GPS
//#define OPTION_SCANCON_2RMHF3600_INC_ENCODER // use with FEATURE_AZ_POSITION_INCREMENTAL_ENCODER and/or FEATURE_EL_POSITION_INCREMENTAL_ENCODER if using the ScanCon 2RMHF3600 incremental encoder
