Include kbd so the console font can be enlarged based on the display
resolution.
Don't force 1080p on the eDP output in Heads.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
These boards get purism-blobs as a submodule of the purism coreboot
fork. modules/coreboot used to skip the purism-blobs dependency for
this fork, but the module is not needed at all for these boards.
librem_l1um keeps CONFIG_PURISM_BLOBS=y since it is built from patched
coreboot 4.11.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
For iterating, enabling these in the board config is easiest. It's
also possible to manually inject config.user ahead of time, or enable
at runtime without flashing, but the normal enable/flash/reboot path
does not work in qemu since it is unable to flash.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
A few lines in the documentation got truncated somehow. Restored the
swtpm instructions from some notes and rewrote the others.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Non-impactful action, first step for #1421 based on participation in testing of #1398 and prior non-tested PRs.
EDIT: last minute readd of x220-maximized boards (x220-maximized and x220-hotp-maximized boards).
x220 is still UNTESTED (legacy, manually extracting ifs, me and gbe).
EDIT: last minute readd of t440p-maximized boards (t440p-maximized and t440p-hotp-maximized boards).
Thanks to @srgrint for lat minute report that t440p and x220 were tested
----
Traces of commands used:
ls qemu-linuxboot* leopard* r630* s2600wf* tioga* winterfell* t420* t520* t440p* w530* kgpe* p8z77* x220* x230-maximized-fhd_edp* | grep ":" | awk -F ":" {'print $1'}| while read board; do mv $board/$board.config $board/UNTESTED_$board.config; done
ls qemu-linuxboot* leopard* r630* s2600wf* tioga* winterfell* t420* t520* t440p* w530* kgpe* p8z77* x220* x230-maximized-fhd_edp* | grep ":" | awk -F ":" {'print $1'}| while read dir; do mv $dir UNTESTED_$dir; done
ls UNTESTED* | grep ":" | awk -F ":" {'print $1'}| awk -F "UNTESTED_" {'print $2'} | while read line; do sed 's/'"$line"'/UNTESTED_'"$line"'/g' ../.circleci/config.yml -i ; done
quick fix of circleci:
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
sed -i 's/UNTESTED_UNTESTED/UNTESTED/g' ../.circleci/config.yml
Modify p8z77-m_pro-tpm1 hotp board config to include to their maximized counterpart
Debian 12's initrd by default now consists of an uncompressed cpio
archive containing microcode, followed by a zstd-compressed cpio
archive. inject_firmware.sh only supported gzip-compressed cpio, so it
could not extract /init from this archive.
Add zstd-decompress to decompress zstd streams (uncompressed size is
about 180 KB).
Add unpack_initramfs.sh which is able to decompress uncompressed, gzip,
or zstd archives, with multiple segments, much like the Linux kernel
itself does.
Use unpack_initramfs.sh to extract /init for blob jail.
Don't compress the new archive segment containing firmware and the
updated /init.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
PureBoot doesn't have any other three-valued settings and this doesn't
present very well in the config UI.
Instead make this a two-valued setting; drop the mode that forces the
EC setting to "stay off" at every boot because this is the default.
When disabling automatic power-on, disable the EC BRAM setting too.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Mini v1/v2's EC can automatically power on the system when power is
applied, based on a value in EC BRAM. Add a configuration setting to
optionally set this value.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Add ioport module, enable for librem_mini_v2. Only inb and outb are
included, inw/outw/inl/outl aren't needed.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Currently Heads will check files in /boot for tampering before booting
into a system. It would be nice if you could use the trusted environment
within Heads and extend this to check files in / itself. This new script
adds that functionality, however due to the length of time it takes to
perform these kinds of checks, it doesn't run automatically (yet).
This feature can be configured from the config GUI - the root device/
directories to check can be set, and it can be configured to run during
boot.
To make this a bit easier to use, I added a feature to detect whether
the hash file exists and if not, to display a more limited menu to the
user guiding them to create the initial hash file. Otherwise it will
display the date the file was last modified, which can be useful to
determine how stale it is.
