Makefile: have inclusion of all defined $BOARD BOARD_TARGETS (me, split_8mb4mb, ...)
TODO: VBIOS scripts for W530/T530 need way more work. To be done later.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Adds two golbal helpers in Makefile:
- board.move_untested_to_tested
- board.move_tested_to_untested
Which can be called by:
- make BOARD=UNTESTED_t420-maximized board.move_untested_to_tested
- make BOARD=x230-legacy board.move_tested_to_untested
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Allow downstreams to add config to site-local/config, which can set
config options, including overriding board config and exporting config
to /etc/config.
The intent of site-local is exactly the same as in coreboot - it is a
place for downstreams to add customizations that are included at well-
defined points in the build. site-local should never appear in the
upstream repository. coreboot's documentation explains this as well:
https://doc.coreboot.org/tutorial/managing_local_additions.html
Move definitions of ROM artifacts later, so site config can override
BRAND_NAME (and still is included after board config to override it as
well).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The 8 qemu-* targets all contained nearly-identical copies of the
targets to prepare the TPM/disk/etc. and then run Qemu. The only
significant differences were for TPM1/TPM2 (extra swtpm_setup step,
addition of --tpm2 to swtpm_setup and swtpm). ROOT_DISK_IMG used := or
= differently in some boards, := was kept.
targets/qemu.mk now defines all Qemu targets and is included only for
qemu-* boards (by defining BOARD_TARGETS in each of those boards).
The documentation was moved from qemu-coreboot-fbwhiptail-tpm1-hotp/
qemu-coreboot-fbwhiptail-tpm1-htop.md to targets/qemu.md. The other 7
qemu boards' symlinks to that file were removed.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
talos-2 builds its own tgz update package that is not currently
integrated with the zip method. While the zip method right now would
theoretically if the tgz was inside it, this would have to be hooked
up for talos-2 specifically.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Only add the update package to all if it is actually being built, fixes
default target with CONFIG_LEGACY_FLASH=y.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The only purpose of legacy flash boards is to be flashed over vendor
firmware using an exploit, to then flash non-maximized Heads firmware.
They are never upgraded to another legacy flash build, and they move
the coreboot ROM from the build directory, so don't build an update
package for those boards.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Allow configuring the ZIP-format update file extension with
CONFIG_BRAND_UPDATE_PKG_EXT in board config. Default is 'zip'.
Create update package in the default Makefile target. Delete
create_npf.sh.
Do not require /tmp/verified_rom in the update file package's
sha256sum.txt (but allow it for backward compatibility).
Show the integrity error if unzip fails instead of dying (which returns
to main menu with no explanation, error is left on recovery console).
This is the most likely way corruption would be detected as ZIP has
CRCs. The sha256sum is still present for more robust detection.
Don't require the ROM to be the first file in sha256sum.txt since it
raises complexity of adding more files to the update archive in the
future. Instead require that the package contains exactly one file
matching '*.rom'.
Restore confirmation prompt for the update-package flow, at some point
this was lost.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Squash of #1502 + moving logo/bootsplash files under branding/Heads
- Move logos and bootsplashes from blobs to branding/Heads/
- Makefile: add support for BRAND_DIR which depends on BRAND_NAME which defaults to Heads if no branding
- Boards coreboot configs: change bootsplash directory to depend on BRAND_DIR (instead of BLOBS_DIR) in bootsplash enabled configs
- Branding/Heads/bootsplash-1024x768.jpg points to branding/Heads/d-wid-ThePlexus_coreboot-linuxboot-heads_background-plain_DonateQrCode.jpg
- xcf file deleted. Original still under #1502 to reuse for modification without recompressing (blobs/heads.xcf)
- CREDITS file created to point to original authors, remixers (Open for details)
- Thanks to: @d-wid for remixing Bing's AI generated Janus logo, @ThePlexus for Qubes Box concept and @ThrillerAtPlay for its matrix background
prepare_thumb_drive: default to creating 10% LUKS container on usb drive, prompts for passphrase is not provided and scan drives if no --device specified
NOTE: qemu usb_thumb drive of 128 mb are not big enough so that 10% of it (12mb) can be used to create thumb drive.
Adds:
- e2fsprogs to support ext4 filesystem creation through mke2fs
- add /etc/mke2fs.conf so that mke2fs knows how to handle ext2/ext3/ext4
- removes mke2fs support from busybox
- bump busybox to latest version which adds cpu accelerated hash functions (not needed per se here)
- Adds exfatprogs to have mkfs.exfat and fsck.exfat
- Adds prepare_thumb_drive /etc/luks-functions to be able to prepare a thumb drive with percentage of drive assigned to LUKS, rest to exfat
- Modify most board configs to test space requirements failing
- Talos2 linux config: add staging Exfat support
- Make e2fsprogs and exfatprogs included by default unless explicitely deactivate in board configs
- Change cryptsetup calls : luksOpen to open and luksClose to close to addresss review
- etc/luks_functions: cleanup
GOAL here is to have secure thumb drive creation which Heads will be able to use to backup/restore/use generated GPG key material in the future (next PR)
Build kbd and ship setfont if enabled with CONFIG_KBD.
When CONFIG_KBD is enabled, setconsolefont.sh will double the console
font size on large displays (>1600 lines tall as a heuristic).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Default the patch version to empty if the module name already includes
the version. Fixes application of coreboot patches.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Define a separate module for each coreboot version, so the module used
to build the ROM will optionally be able to reference the toolchain
from a different module.
This will allow coreboot fork builds to use the toolchain from the
corresponding release.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Use CONFIG_BRAND_NAME to control the brand name displayed in the UI.
Override by setting BRAND_NAME when building, either in the Makefile or
on the command line.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Debian 12's initrd by default now consists of an uncompressed cpio
archive containing microcode, followed by a zstd-compressed cpio
archive. inject_firmware.sh only supported gzip-compressed cpio, so it
could not extract /init from this archive.
Add zstd-decompress to decompress zstd streams (uncompressed size is
about 180 KB).
Add unpack_initramfs.sh which is able to decompress uncompressed, gzip,
or zstd archives, with multiple segments, much like the Linux kernel
itself does.
Use unpack_initramfs.sh to extract /init for blob jail.
Don't compress the new archive segment containing firmware and the
updated /init.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Boards can place a file in $(board)/initrd/bin/board-init.sh to perform
board-specific initialization.
If present, the board's $(board)/initrd directory is included in the
initrd via board.initrd.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Add ioport module, enable for librem_mini_v2. Only inb and outb are
included, inw/outw/inl/outl aren't needed.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
On some newer platforms of intel (confirmed on nehalem, sandy/ivy
bridge), coreboot after commit [2ac149d294af795710eb4bb20f093e9920604abd](https://review.coreboot.org/cgit/coreboot.git/commit/?id=2ac149d294af795710eb4bb20f093e9920604abd)
registers an SMI to lockdown some registers on the chipset, as well
as access to the SPI flash, optionally. The SMI will always be triggered
by coreboot during S3 resume, but can be triggered by either coreboot
or the payload during normal boot path.
Enabling lockdown access to SPI flash will effectly write-protect it,
but there is no runtime option for coreboot to control it, so letting
coreboot to trigger such SMI will leave the owner of the machine lost
any possibility to program the SPI flash with its own OS, and becomes
a nightmare if the machine is uneasy to disassemble, so a scheme could
be implement, in which the SMI to lockdown chipset and SPI flash is left
for a payload to trigger, and temporarily disabling such triggering in
order to program the SPI flash needs authentication.
I have implemented a passcode-protected runtime-disableable lockdown
with grub, described [here](https://github.com/hardenedlinux/Debian-GNU-Linux-Profiles/blob/master/docs/hardened_boot/grub-for-coreboot.md#update-for-coreboot-after-commit-2ac149d294af795710eb4bb20f093e9920604abd). In order to implement a similar scheme for
Heads, I wrote [io386](https://github.com/hardenedlinux/io386).
With this commit, io386 will be called before entering boot routine
to trigger the SMI to finalize the chipset and write protect the SPI
flash at the same time. Entering recovery shell will leave the flash
writable.
(The authentication routine implemented in previous revisions has been
split as an independent commit.)
Originally proposed under PR#326
bash was accidentally dropped from bin_modules when reintroducing
CONFIG_BASH, put it back and depend on CONFIG_MODULES now.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
- legacy-flash boards have a single purpose: to flash BIOS region through flashrom.
- They do not need bash nor have space for it in their 4mb defined coreboot CBFS region
Test build to have legacy boards builds under osresearch#1292
Include bash in all builds. Remove CONFIG_BASH.
Remove CONFIG_BASH_IS_ASH from busybox configuration and clean up hacks
in modules/bash.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The actual use of curl was already removed, update tpm2-tools patch to
also remove the check for curl. Remove the curl module and
CONFIG_CURL.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
-coreboot support of TPM v2.0 (shared config for TPM2 support across all 4 previous variations)
-swtpm set to be launched under TPM v2.0 mode under board config
-Documentation file under each board.md softlinks to qemu-coreboot-fbwhiptail-tpm1.md (which has been generalized)
This is skeleton for TPM v2 integration under Heads
-------------
WiP
TODO:
- libcurl cannot be built as a tpm2-tools dependency as of now not sure why. curl currently needs to be added in board config to be built
- Note: tpm-reset (master and here) needs some review, no handle of no tpm use case. Caller is responsible to not call it otherwise does nothing
- init tries to bind fd and fails currently
- Note: Check if whiptail is different of fbwhiptail in clearing screen. As of now every clear seems to be removed, still whiptail clears previous console output
- When no OS' /boot can be mounted, do not try to TPM reset (will fail)
- seal-hotpkey is not working properly
- setting disk unlock key asks for TPM ownership passphrase (sealing in NV requires ownership, but text is misleading user as if reowning TPM)
- We should cache input, feed tpm behind the scene and wipe passphrase and state clearly that this is TPM disk unlock kye passphrase.
- primary key from TPM2 is invalid most of the time from kexec-select-boot and verifying global hashes but is setuped correctly at disk unlock key setup
- would be nice to take advantage of bash function tracing to understand where we are for debugging purposes, code takes ash in consideration only
- tpmr says it implements nv calls but actually doesn't. Removing those falsely wrapped functions would help.
- Implementing them would be better
- REVIEW TODOS IN CODE
- READD CIRCLECI CONFIG
Current state:
- TPM unseal works without disk unlock key and generates TOTP properly (was missing die condition at unseal to not produce always good TOTP even if invalid)
- TPM disk encryption key fails. Hypothesis is that sealing with USB drivers loaded and measures in inconsistent with sealed with/without.
- TPM disk unsealing happens without USB modules being loaded in non-HOTP setup. This fails.
- Current tests are with fbwhiptail (no clear called so having traces on command line of what happens)
- Testing with HOTP implementation for sealing/unsealing since that forces USB module loads on each boot to remove this from failing possibilities
This avoids overwriting the busybox binary (and bricking the system)
by following a symlink when busybox and other module both provide
a command with the same filename.
Signed-off-by: Daniel Pineda <daniel.pineda@puri.sm>
pkg-config will still pick up system default directories from
PKG_CONFIG_LIBDIR even if PKG_CONFIG_PATH is set. Per the docs,
cross compilation requires clearing PKG_CONFIG_PATH and setting
PKG_CONFIG_LIBDIR (which is always searched after PKG_CONFIG_PATH).
Fixes issues observed in tpm2_retry branch picking up packages from
host environment.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
This patch changes the bash location in the makefile from /bin/bash to
/usr/bin/env bash. The latter is a more reproducible location as it is
common to more *nix systems which don't contain the former, such as
NixOS.
To be used in board configuration. Expands to the path of the board's
build directory. Also simplifies main Makefile a bit.
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
