gui-init: make sure that reseal_tpm_disk_decryption_key happens only on successful TOTP/HOTP sealing, reusing cached TPM Owner password
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Changes:
- As per master: when TOTP cannot unseal TOTP, user is prompted to either reset or regenerate TOTP
- Now, when either is done and a previous TPM Disk Unlock Key was setuped, the user is guided into:
- Regenerating checksums and signing them
- Regenerating TPM disk Unlock Key and resealing TPM disk Unlock Key with passphrase into TPM
- LUKS header being modified, user is asked to resign kexec.sig one last time prior of being able to default boot
- When no previous Disk Unlock Key was setuped, the user is guided into:
- The above, plus
- Detection of LUKS containers,suggesting only relevant partitions
- Addition of TRACE and DEBUG statements to troubleshoot actual vs expected behavior while coding
- Were missing under TPM Disk Unlock Key setup codepaths
- Fixes for #645 : We now check if only one slots exists and we do not use it if its slot1.
- Also shows in DEBUG traces now
Unrelated staged changes
- ash_functions: warn and die now contains proper spacing and eye attaction
- all warn and die calls modified if containing warnings and too much punctuation
- unify usage of term TPM Disk Unlock Key and Disk Recovery Key
prepare_thumb_drive: default to creating 10% LUKS container on usb drive, prompts for passphrase is not provided and scan drives if no --device specified
NOTE: qemu usb_thumb drive of 128 mb are not big enough so that 10% of it (12mb) can be used to create thumb drive.
Adds:
- e2fsprogs to support ext4 filesystem creation through mke2fs
- add /etc/mke2fs.conf so that mke2fs knows how to handle ext2/ext3/ext4
- removes mke2fs support from busybox
- bump busybox to latest version which adds cpu accelerated hash functions (not needed per se here)
- Adds exfatprogs to have mkfs.exfat and fsck.exfat
- Adds prepare_thumb_drive /etc/luks-functions to be able to prepare a thumb drive with percentage of drive assigned to LUKS, rest to exfat
- Modify most board configs to test space requirements failing
- Talos2 linux config: add staging Exfat support
- Make e2fsprogs and exfatprogs included by default unless explicitely deactivate in board configs
- Change cryptsetup calls : luksOpen to open and luksClose to close to addresss review
- etc/luks_functions: cleanup
GOAL here is to have secure thumb drive creation which Heads will be able to use to backup/restore/use generated GPG key material in the future (next PR)
HOTP/TOTP secrets don't have to be printable. Use binary data to
include 160 bits of entropy instead of just 80.
The secret is still limited to 20 bytes. Most keys now support up to
40 bytes, but tpmtotp is still limited to 20 bytes.
Move the truncation to 20 bytes a bit later, for future improvements to
detect the key's actual limit.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
flash.sh had a special mode to read (like -r) and then sha256sum the
resulting file. This is no different from just a read followed by a
sha256sum, and the only caller also had logic to sha256sum a cached
file anyway.
Just use flash.sh -r and sha256sum the result.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Some prompts were missed when changing to 0 80 the first time around,
and some new ones were added thinking that size was intentional.
Replace '16 60' with '0 80' globally.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Allow configuring the root hash feature when the variables are not set
initially. This worked on Librem boards because the boards all have
defaults for these variables, but didn't work when those defaults were
not present.
Fix set_config function to put quotes around an added variable's value.
Change load_config_value function to default to empty, so it can be
used with non-boolean variables. None of the existing callers cared
about the 'n' default (boolean variables should always be tested ="y"
or !="y" anyway).
Use load_config_value in config-gui.sh for boot device and the root
hash parameters, so unset defaults do not cause a failure. Improve the
prompts so the "current value" text only appears if there is a current
value. Use set_config instead of replace_config so the variables will
be added if needed.
Prevent enabling the root hash feature if it hasn't been configured
yet.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Remove brand name from this configuration variable. For backward
compatibility, update config.user in init if the branded variable is
present.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Stop manually loading config values, just update config in environment.
Never test values against "n", since many default to empty. Always
test ="y" or !="y", any other value is off.
Add set_user_config() function to set a value in config.user,
combine configs, and update config in environment. Use it in setting
implementations.
Remove toggle_config, it wasn't very useful because the settings still
test y/n in order to show specific confirmation and success messages.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Blob jail provides device firmware blobs to the OS, so the OS does not
have to ship them. The firmware is passed through the initrd to
/run/firmware, so it works with both installed and live OSes, and there
are no race conditions between firmware load and firmware availability.
The injection method in the initrd is specific to the style of init
script used by PureOS, since it must add a copy command to copy the
firmware from the initrd to /run. If the init script is not of this
type, boot proceeds without device firmware.
This feature can be enabled or disabled from the config GUI.
Blob jail is enabled automatically if the Intel AX200 Wi-Fi module is
installed and the feature hasn't been explicitly configured.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Restricted Boot mode only allows booting from signed files, whether that
is signed kernels in /boot or signed ISOs on mounted USB disks. This
disables booting from abitrary USB disks as well as the forced "unsafe"
boot mode. This also disables the recovery console so you can't bypass
this mode simply by running kexec manually.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
PureBoot Basic mode provides the full Linux userspace in firmware from
Heads without requiring verified boot or a Librem Key. Basic and
verified boot can be switched freely without changing firmware, such as
if a Librem Key is lost.
PureBoot Basic can apply firmware updates from a USB flash drive, and
having a complete Linux userspace enables more sophisticated recovery
options.
Basic mode boots to the first boot option by default, setting a default
is not required. This can be configured in the config GUI.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Add these two functions for use in config-gui.sh for future toggles.
load_config_value() obtains the value of a config setting, defaulting
to 'n'. get_config_display_action() displays 'Enable' or 'Disable'
depending on the current value.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
enable_usb_storage() inserts usb-storage.ko if not already loaded, then
waits for USB storage devices to appear.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
pause_automatic_boot() prompts that an automatic boot is about to occur
and allows the user to interrupt it.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>