Change order if user chooses both reencrypt and change passphrase, so that passphrase is changed first.
Signed-off-by: Christian Foerster <christian.foerster@mailfence.com>
Uses fold on the entire passphrase string now; tested in recovery shell of NK Heads 2.1.
Reverted change of WIDTH parameter (first commit of this PR).
Signed-off-by: Christian Foerster <christian.foerster@mailfence.com>
This partially fixes#1537, but while the increased width wouldn't be a problem on the NV41 AFAICT, I don't know about other machines.
I don't know what @tlaurion means with "busybox's folding", which may be a better solution.
Signed-off-by: Christian Foerster <christian.foerster@mailfence.com>
The call to `hotp_verification regenerate` seems to leave the
communication in a bad state, thus the following `gpg` calls fail. With
this workaround `scdaemon` will resart with the next `gpg` call.
Signed-off-by: Markus Meissner <coder@safemailbox.de>
Don't repeat this message if the user says "no" to the confirmation
prompt. Go directly to the menu.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Move confirmation of formatting flash drive with LUKS percentage
selection before any reset actions have been taken, so aborting does
not result in a half-reset system. Combine with the more basic
"confirm" prompt that existed after selecting the device (but did not
include the LUKS size information).
Split up prepare_flash_drive into interactive_prepare_flash_drive (both
prompts and formats as before), confirm_thumb_drive_format (just
confirms the selections), and prepare_thumb_drive (now noninteractive).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Combine prompt to disconnect other devices with prompt to connect the
desired device.
Show block device sizes in MB/GB when selecting device so it is easier
to select. file_selector now supports --show-size to include block
device sizes in menu.
Rework file_selector so menu options can contain spaces (use bash
array) and to simplify logic.
Prompt to select flash drive and LUKS percentage in OEM reset before
actually taking any actions, so aborting doesn't half-reset the system.
Abort OEM reset if user aborts the flash drive selection instead of
looping forever. (Canceling the confirmation still loops to retry but
it is possible to exit by aborting the repeated menu.)
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Warn user if connected usb block device is less then 128mb, since creating LUKS container of less then 8mb might cause issues.
Signed-off-by: Thierry Laurion <insurgo@riseup.net>
Prompt for TPM owner password internally within tpm2_counter_create.
Add tpm1_counter_create to prompt for password internally. Wipe the
cache in either if the operation fails, in case the password was
incorrect.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
* use GPG_ALGO as gpg key generation algorithm
* determine GPG_ALGO during runtime like this:
* if CONFIG_GPG_ALGO is set, use as preference
* adapt based on usb-token capabilities (currently only Nitrokey 3)
prepare_thumb_drive: default to creating 10% LUKS container on usb drive, prompts for passphrase is not provided and scan drives if no --device specified
NOTE: qemu usb_thumb drive of 128 mb are not big enough so that 10% of it (12mb) can be used to create thumb drive.
Adds:
- e2fsprogs to support ext4 filesystem creation through mke2fs
- add /etc/mke2fs.conf so that mke2fs knows how to handle ext2/ext3/ext4
- removes mke2fs support from busybox
- bump busybox to latest version which adds cpu accelerated hash functions (not needed per se here)
- Adds exfatprogs to have mkfs.exfat and fsck.exfat
- Adds prepare_thumb_drive /etc/luks-functions to be able to prepare a thumb drive with percentage of drive assigned to LUKS, rest to exfat
- Modify most board configs to test space requirements failing
- Talos2 linux config: add staging Exfat support
- Make e2fsprogs and exfatprogs included by default unless explicitely deactivate in board configs
- Change cryptsetup calls : luksOpen to open and luksClose to close to addresss review
- etc/luks_functions: cleanup
GOAL here is to have secure thumb drive creation which Heads will be able to use to backup/restore/use generated GPG key material in the future (next PR)
- Trace calls need to happen after sourcing /etc/functions not before
- Move sourcing of external files at beginning of file, remove /etc/functions sourcing duplicate
- gpg error redirection was sent to /dev/null where expected to be added to whiptail in case of error (2>&1 instead and redirection to file)
Problem
When using a custom password for TPM, the OEM re-ownership process is broken
Impact
The OEM re-ownership process breaks for any user setting a custom password and not just using 12345678
First appeared
6923fb5e20
Detail
on line 498, if blank, the TPM custom password is overwritten with TPM_PASS_DEF (eg, when no custom password is set by the user installing)
```
if [ "$TPM_PASS" == "" ]; then TPM_PASS=$TPM_PASS_DEF; fi
```
so far so good. $TPM_PASS should be used for all TPM interaction from this point. $TMP_PASS_DEF is now a disposed of variable.
we see that happens when resetting the TPM on line 712 (generate_checksums) is that $TPM_PASS is used (correctly)
```## reset TPM and set password
if [ "$CONFIG_TPM" = "y" ]; then
echo -e "\nResetting TPM...\n"
tpmr reset "$TPM_PASS" >/dev/null 2>/tmp/error
---SNIP
```
The TPM now has either the custom password of the user, or the default of 12345678 depending on user selection.
On line 712, we duck into the generate_checksums sub, which for some reason reverts to TPM_PASS_DEF
```
# create Heads TPM counter
if [ "$CONFIG_TPM" = "y" ];then
if [ "$CONFIG_IGNORE_ROLLBACK" != "y" ]; then
tpmr counter_create \
-pwdo "$TPM_PASS_DEF" \
--SNIP
```
This then, rightly, fails due to
```
Authentication failed (Incorrect Password) (ox1) from TPM_CreateCounter
```
tpm-reset is just a prompt for the password followed by tpmr reset.
oem-factory-reset already bypasses the prompt, just call tpmr reset
directly.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Most logic throughout Heads doesn't need to know TPM1 versus TPM2 (and
shouldn't, the differences should be localized). Some checks were
incorrect and are fixed by this change. Most checks are now unchanged
relative to master.
There are not that many places outside of tpmr that need to
differentiate TPM1 and TPM2. Some of those are duplicate code that
should be consolidated (seal-hotpkey, unseal-totp, unseal-hotp), and
some more are probably good candidates for abstracting in tpmr so the
business logic doesn't have to know TPM1 vs. TPM2.
Previously, CONFIG_TPM could be variously 'y', 'n', or empty. Now it
is always 'y' or 'n', and 'y' means "any TPM". Board configs are
unchanged, setting CONFIG_TPM2_TOOLS=y implies CONFIG_TPM=y so this
doesn't have to be duplicated and can't be mistakenly mismatched.
There were a few checks for CONFIG_TPM = n that only coincidentally
worked for TPM2 because CONFIG_TPM was empty (not 'n'). This test is
now OK, but the checks were also cleaned up to '!= "y"' for robustness.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Use common password prompt logic in tpm-reset rather than duplicating
in tpmr reset.
Use common logic in config-gui.sh to reset the TPM.
Use common logic in oem-factory-reset to reset TPM. Fixes extra
prompts for TPM2 owner password even when choosing to use a common
password. Fix sense of "NO TPM" check in TOTP generation (which only
happened to work because CONFIG_TPM is empty for TPM2).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
