Update to 1.3. Includes navigation improvements for devices with just
up/down/Enter keys, for Librem 11.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
This is 4.21-Purism-1 plus a fix for native graphics init on Mini
v1/v2: HDMI1 is enabled so passive DisplayPort to DVI/HDMI adapters
will work.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Rationale:
cpio -t alone cannot extract initrd past early cpio (microcode) in most packed initrd.
unpack_initramfs.sh already under master comes to the rescue, but its usage up to today was limited to pass firmware blobs to final OS under boards/librem_mini_v2
Debian OSes (and probably others) need to have cryptroot/crypttab overriden directly, otherwise generic generation of crypttab is not enough.
Extracting crypttab and overriding directly what is desired by final OS and exposed into /boot/initrd is the way to go otherwise hacking on top of hacks.
This brings default packed modules under Heads to 5 modules, which needs to be deactivate in board configs if undesired:
user@heads-tests-deb12:~/heads$ grep -Rn "?= y" modules/ | grep -v MUSL
modules/zlib:1:CONFIG_ZLIB ?= y
modules/zstd:3:CONFIG_ZSTD ?= y
modules/exfatprogs:2:CONFIG_EXFATPROGS ?= y
modules/busybox:2:CONFIG_BUSYBOX ?= y
modules/e2fsprogs:2:CONFIG_E2FSPROGS ?= y
prepare_thumb_drive: default to creating 10% LUKS container on usb drive, prompts for passphrase is not provided and scan drives if no --device specified
NOTE: qemu usb_thumb drive of 128 mb are not big enough so that 10% of it (12mb) can be used to create thumb drive.
Adds:
- e2fsprogs to support ext4 filesystem creation through mke2fs
- add /etc/mke2fs.conf so that mke2fs knows how to handle ext2/ext3/ext4
- removes mke2fs support from busybox
- bump busybox to latest version which adds cpu accelerated hash functions (not needed per se here)
- Adds exfatprogs to have mkfs.exfat and fsck.exfat
- Adds prepare_thumb_drive /etc/luks-functions to be able to prepare a thumb drive with percentage of drive assigned to LUKS, rest to exfat
- Modify most board configs to test space requirements failing
- Talos2 linux config: add staging Exfat support
- Make e2fsprogs and exfatprogs included by default unless explicitely deactivate in board configs
- Change cryptsetup calls : luksOpen to open and luksClose to close to addresss review
- etc/luks_functions: cleanup
GOAL here is to have secure thumb drive creation which Heads will be able to use to backup/restore/use generated GPG key material in the future (next PR)
Nothing else shares the 4.20.1 toolchain yet, and upcoming forks are
based on older releases. We'll share it when other boards update to
4.20.1.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
fbwhiptail scales its UI based on the display size. FBWHIPTAIL_SCALE
can set a specific scale factor for testing.
fbwhiptail no longer looks for a 1080p mode when the default mode is
2160p.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Build kbd and ship setfont if enabled with CONFIG_KBD.
When CONFIG_KBD is enabled, setconsolefont.sh will double the console
font size on large displays (>1600 lines tall as a heuristic).
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
CROSS= is needed for skiboot on PPC64 due to different endianness
relative to coreboot.
The talos_2 fork doesn't share the toolchain because it is the only
_fork_, not board, to be precise. We could add more boards using that
fork without having to create a shared toolchain, it only matters if we
add another fork or start building boards from the upstream release
too.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Two := assignments were factored out together, the second overwrote the
first. Fix to +=, and remove the nitrokey assignment since it came
from a branch.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
This was spelled wrong - it's actually '_depends'. 'initrd' isn't a
module any more so the value doesn't make sense, remove it.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
The skiboot build fails to find the toolchain when it's not in the
default location. There is only one ppc64 board anyway, so there's no
point trying to share a toolchain for now.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Use .heads-toolchain to mark that the toolchain was built rather than
.xcompile. coreboot doesn't generate .xcompile until the build step,
so all modules had to build successfully before we would stop trying to
to rebuild the toolchain. Build steps should generally produce the
indicated outputs too, which was not occurring here.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reuse the toolchain from a coreboot release for fork builds. Either
the fork or the release can be built first, in either case the
release's toolchain is built at the default location and reused for
later builds.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Define a separate module for each coreboot version, so the module used
to build the ROM will optionally be able to reference the toolchain
from a different module.
This will allow coreboot fork builds to use the toolchain from the
corresponding release.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
At one time coreboot was built using Heads' musl toolchain, but this
was later reverted. coreboot builds with its own toolchain again.
CROSS= has no effect on coreboot proper (only exception is PPC64
skiboot payload). It was added to coreboot by a patch that was deleted
in 8e44853. COREBOOT_IASL was set to the default, that was only needed
when the toolchain was being overridden to override iasl back to the
coreboot one.
ppc64 still specifies CROSS= since skiboot is unable to find coreboot's
toolchain from XGCCPATH but checks CROSS. This builds skiboot with the
Heads toolchain as before.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Remove coreboot 4.8.1, 4.13, and 4.17, which were all unused.
Remove extra copies of EXTRA_FLAGS which duplicated the common
definition. The only difference was
-Wno-error=address-of-packed-member, the warning is now disabled
entirely everywhere with -Wno-address-of-packed-member.
Use separate coreboot_version values for talos_2, nitrokey, and purism,
which gives each a separate build directory.
Move conditional blob definitions out of each coreboot version.
Fix condition for coreboot-blobs - whether a module is a git clone
actually depends on non-empty <module>_repo, not <module>_version==git.
Fix the test so git versions of coreboot can have arbitrary names.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Updated cbmem searches for CBMEM exposed by kernel in sysfs before
trying to read it from memory directly. As such, there is no need for
pointing to that file explicitly.
New coreboot revision also fixes output of 'cbmem -t' caused by wrong
endianness.
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Update flashrom - in particular, this includes support for new chipsets
like Jasper Lake.
CONFIG_INTERAL_X86 was created so CONFIG_INTERNAL could apply to other
platforms, enable it for x86.
The default build target now requires sphinx, just build flashrom
itself.
Update flashrom_progress - filter out noise in newer flashrom that
chokes the progress bar implementation, make size detection more
robust, improve progress bar implementation slightly.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Co-signed by: Thierry Laurion <insurgo@riseup.net.
both linux/coreboot:
- save_in_defconfig_format_in_place : takes whatever coreboot config file for a make BOARD=xyz statement and saves it in defconfig
- save_in_oldefconfig_format_in_place : takes whatever coreboot config file for a make BOARD=xyz statement and saves it in oldefconfig
linux:
- linux.prompt_for_new_config_options_for_kernel_version_bump:
- The most useful helper as of now when doing kernel version bump.
- Requires to save current kernel config in oldconfig (make BOARD=xyz linux.save_in_oldefconfig_format_in_place) first, then bump kernel version in board config and then use that helper to review new options and save in tree.
Use CONFIG_BRAND_NAME to control the brand name displayed in the UI.
Override by setting BRAND_NAME when building, either in the Makefile or
on the command line.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Debian 12's initrd by default now consists of an uncompressed cpio
archive containing microcode, followed by a zstd-compressed cpio
archive. inject_firmware.sh only supported gzip-compressed cpio, so it
could not extract /init from this archive.
Add zstd-decompress to decompress zstd streams (uncompressed size is
about 180 KB).
Add unpack_initramfs.sh which is able to decompress uncompressed, gzip,
or zstd archives, with multiple segments, much like the Linux kernel
itself does.
Use unpack_initramfs.sh to extract /init for blob jail.
Don't compress the new archive segment containing firmware and the
updated /init.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
These changes primarily improve server boards using BMC video. The
correct DRI card is selected even if it isn't the first one, and
performance is greatly improved on non-UMA cards.
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
