Since the custom password is used to set the GPG admin
password as well as the TPM and GPG user passwords, an
8-character minimum is required. Inform the user of this,
and validate custom password length upon entry.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Disabling IOMMU on the iGPU for Heads (mostly) eliminates
display corruption when kexec'ing to new kernel (and has no effect
on iGPU/IOMMU for kexec'ed kernel)
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
If /boot isn't mounted, we can't read the HOTP counter, so no
point in reading from the TPM. This speeds up getting to the
main menu in the case of an inaccessible or non-existant /boot.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Update text on TOTP error prompt to provide better
guidance for users following the use of the OEM
factory reset function
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Drop coreinto/memtest secondary payloads as they are not
usable with Linux as primary payload. Leftover copy-pasta
from original SeaBIOS configs.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
If kexec-sign-config fails due to GPG key not present,
the double die() results in a kernel panic (and if it didn't,
/boot would be left mounted RW). Fix this by removing call to
die() and ensuring /boot remounted RO regardless checksum
update success or failure.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Normally we resort to default passwords for OEM reset, however we have a
use case where it would be convenient to set a custom password instead.
This patch adds a simple prompt (that defaults to the defaults if you
hit Enter) that enables someone using the OEM reset to enter a single
password that will replace the defaults (TPM, GPG Admin, GPG User).
If the user chooses to flash a "cleaned" ROM (not persisting settings
or GPG keys) then the signatures on /boot are no longer valid, so clear
them out. This allows for the OEM factory reset prompt to be shown on
the next boot.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Users may wish to temporarily boot an OS from a drive other than
their primary boot drive, without changing the default and saving
to ROM. Mounting /boot after changing the device selection
facilitates this by allowing the user to then choose an unsafe boot
from the newly-selected boot drive.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
when commit [928f003] config-gui: add 'Full Reset' option
was added, the bottom end of the save config option was
accidentally truncated; restore it to fix save config option
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add `--strip 1` to tar file extraction in the `Makefile`,
which ensures that the directory name in `build/` will
match the one listed in `$($(MODULE)_dir)`.
Signed-off-by: Trammell hudson <hudson@trmm.net>
Add a check to determine if first boot after flashing a cleaned
ROM, and prompt user to run the OEM Factory Reset if so
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add an OEM Factory Reset menu option, which performs an
unattended reset and configuration of the device's TPM,
GPG security token, and boot device / boot selection.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add oem-factory-reset script which performs an unattended
reset and configuration of the device's TPM, GPG security token,
and boot device / boot selection.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add function to detect boot device. Start by checking
CONFIG_BOOT_DEV, then iterate thru all bootable partitions.
Check if partition is mountable, contains grub directory.
Update CONFIG_BOOT_DEV and mount on /boot if successful.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Initial card detection can sometimes fail, so prompt the user
to remove/reinsert their GPG card before retrying. Since
errexit is likely set, disable it prior to calling --card-status so
we can handle the error ourself, then re-set if necessary when done.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Next prompt will be to ensure GPG key is attached, which defaults
to Y, so default here as well for consistency
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Check that any files added to cbfs exist before attempting to
add them, so flashing doesn't fail after a reset.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Add Full Reset option to clear all GPG keys and user settings,
both from the local filesystem and running firmware, and
clear/reset the TPM
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
If the boot device is invalid or unabled to be mounted
and the user opts to select a new boot device, jump
directly to that menu option and avoid the additional
step of showing the config main menu.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Updating TOTP/HOTP is mainly necessary after a user updates
their firmware, and no need to force another reboot.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
