Set tcp keepalive timers to 60 seconds. Seems to default to 2 hours on ubuntu 22. Most firewalls will age out an idle tcp session at 1 hour.
Will not address telnet console failing after a tcp session has failed (TimeoutError).
Removed an extra slash at the end when setting the user home directory. This was causing unexpected behavior for other scrips as ~ was aliased to /opt/gns3/ instead of the expected /opt/gns3.
This caused an extra / to appear in commands unexpectedly.
Set tcp keepalive timers to 60 seconds. Seems to default to 2 hours on ubuntu 22. Most firewalls will age out an idle tcp session at 1 hour.
Will not address telnet console failing after a tcp session has failed (TimeoutError).
Removed an extra slash at the end when setting the user home directory. This was causing unexpected behavior for other scrips as ~ was aliased to /opt/gns3/ instead of the expected /opt/gns3.
This caused an extra / to appear in commands unexpectedly.
The release cycle of NixOs is around every half of the year.
On the unstable channel you have the latest gns3-server version.
Do not worry to use unstable because it mostly just the latest stable version. You can also do overlays to keep your other systems pkgs on the regular release version.
Changes to remote-install to make it compatible with the latest versions of ubuntu server. Also adds an option to install the welcome dialog from gns3vm
In reference to bug #1918, the gns3.service.systemd file references ExecPath /usr/bin/gns3server which needs to be changed to /usr/local/bin/gns3server for the daemon/service to run without failure.
Please see the change I made to the service above.
Remove check for open project. Without this check a remote can be rebooted and will be usable once the main server polls it again. Without this the main server would need to open a project that already uses the remote server or restart the main server's gns3 process.
using --no-cache-dir flag in pip install ,make sure downloaded packages
by pip don't cached on system . This is a best practice which make sure
to fetch from repo instead of using local cached one . Further , in case
of Docker Containers , by restricting caching , we can reduce image size.
In term of stats , it depends upon the number of python packages
multiplied by their respective size . e.g for heavy packages with a lot
of dependencies it reduce a lot by don't caching pip packages.
Further , more detail information can be found at
https://medium.com/sciforce/strategies-of-docker-images-optimization-2ca9cc5719b6
Signed-off-by: Pratik Raj <rajpratik71@gmail.com>
While try this example with GNS3 branch 3.0 on Ubuntu 20.04 LTS, the API call
```$ curl http://172.17.46.114:3080/v3/users/authenticate -d '{"username": "admin", "password": "admin"}' ``` fails with ```{"detail":[{"loc":["body"],"msg":"value is not a valid dict","type":"type_error.dict"}]}```.
The additional parameter appended to curl fixes this ```{"access_token":"eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJzdWIiOiJhZG1pbiIsImV4cCI6MTYzMTI4NTc4NX0.kT1dAN4v1vHMTBJO2UaI2I7yAFhnSpBU9iqmdDuwtAQ","token_type":"bearer"} ```
Found after googling for the error above in
FastAPI 0.65.2 POST request fails with "value is not a valid dict" when using the Requests library; 0.65.1 works (with a caveat) #3373https://github.com/tiangolo/fastapi/issues/3373#issuecomment-886745123
When `--with-iou` and `--with-openvpn` are both enabled, hostname
were updated in `/etc/hostname` but not on the running system (only
changed after reboot). So the old hostname were used in MOTD and
client OpenVPN config URL.
Some cloud providers (example, AWS EC2 for non-metal instances) do not
support nested virtualization, as well as some hypervisors (example,
VirtualBox prior to 6.x, Hyper-V on AMD). Option `--without-kvm` can
be used to disable hardware acceleration in these scenarios. Otherwise,
user will receive error when trying to start Qemu-based devices.
Commit also: replace `enable_kvm` and `require_kvm` with newer config
options (`enable_hardware_acceleration` and
`require_hardware_acceleration`); and do some code refactors.
One can argue that, instead of prividing option `--without-kvm`, we
should check if system supports KVM and enable/disable hardware
acceleration accordingly. However, there is the case when the
hypervisor supports nested virtualization, but feature is just disabled.
The chosen approach for this case is to keep KVM enabled and let user
known (user will eventually receive an error) so user can fix it.
Otherwise, user might never know and suffer from performance
degradation.
Add enable SSL config validator.
Strict configuration file validation: any error will prevent the server to start.
Core server logic moved to a Server class.
Fail-safe: use "ide" if an image is set but no interface type is configured.
Use the HDA disk interface type if none has been configured for HDD.
(cherry picked from commit 464fd804ce)
There's currently no clipboard support for servers running on TigerVnc. TigerVnc clipboard support is provided by vncconfig that needs to be spawned for every display socket. The code changes above provides that functionality
An application ID is used by IOU to generate its interface Mac addresses. They must be unique across all opened projects sharing the same computes to avoid Mac address collisions.
# required to fetch internal or private CodeQL packs
packages:read
# only required for workflows in private repositories
actions:read
contents:read
strategy:
fail-fast:false
matrix:
include:
- language:python
build-mode:none
# CodeQL supports the following values keywords for 'language': 'c-cpp', 'csharp', 'go', 'java-kotlin', 'javascript-typescript', 'python', 'ruby', 'swift'
# Use `c-cpp` to analyze code written in C, C++ or both
# Use 'java-kotlin' to analyze code written in Java, Kotlin or both
# Use 'javascript-typescript' to analyze code written in JavaScript, TypeScript or both
# To learn more about changing the languages that are analyzed or customizing the build mode for your analysis,
# see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning.
# If you are analyzing a compiled language, you can modify the 'build-mode' for that language to customize how
# your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
steps:
- name:Checkout repository
uses:actions/checkout@v4
# Initializes the CodeQL tools for scanning.
- name:Initialize CodeQL
uses:github/codeql-action/init@v3
with:
languages:${{ matrix.language }}
build-mode:${{ matrix.build-mode }}
# If you wish to specify custom queries, you can do so here or in a config file.
# By default, queries listed here will override any specified in a config file.
# Prefix the list here with "+" to use these queries and those in the config file.
# For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
# queries: security-extended,security-and-quality
# If the analyze step fails for one of the languages you are analyzing with
# "We were unable to automatically build your code", modify the matrix above
# to set the build mode to "manual" for that language. Then modify this step
# to build your code.
# ℹ️ Command-line programs to run using the OS shell.
# 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
- if:matrix.build-mode == 'manual'
shell:bash
run:|
echo 'If you are using a "manual" build mode for one or more of the' \
'languages you are analyzing, replace this with the commands to build' \
* Configure self-hosting JavaScript and CSS for docs
* Fix project auto open feature. Fixes #2455
* Store IOU licence in the secrets directory and disable the check by default
* Require "Project.Audit" permission to duplicate a project and check if "Project.Allocate" permission for the destination.
## 2.2.52 02/12/2024
* Bundle web-ui v2.2.52
* Sync appliances
* Remove restrictions based on file extension when listing images and fix ELF header checks
* Fix use project name instead of ID for fast duplication when running local server. Fixes #2446
* Overwrite user resources when the originals have changed.
* Relax setuptools requirement to allow for easier Debian packaging on Ubuntu Focal & Jammy
## 3.0.0rc2 20/11/2024
* Bundle web-ui v3.0.0rc2
* Fix error 500 on PUT for cloud, nat, vmware and vpcs nodes. Fixes #2426
* Add a duplicated project in the same resource pools as the original project if it is in any
* Upgrade FastAPI to v0.115.5
* Overwrite user resources when the originals have changed.
* Relax setuptools requirement to allow for easier Debian packaging on Ubuntu Focal & Jammy
* Increase SQLite timeout. Ref #2422
* Fix test user with wrong creds
* Upgrade dependencies and fix Pydantic warnings
* Upgrade aiohttp to v3.10.10. Fixes #2411
* Replace aiohttp.web.HTTPConflict()
* Python 3.13 support
## 2.2.51 07/11/2024
* Catch error when cannot resize Docker container TTY.
* Do not use "ide" if there is a disk image and no interface type has been explicitly configured.
* Use @locking when sending uBridge commands. Ref https://github.com/GNS3/gns3-gui/issues/3651
* Fix run Docker containers with user namespaces enabled. Fixes #2414
* Python 3.13 support
* Upgrade dependencies
* Fix errors in init.sh. Fixes #2431
## 2.2.50 21/10/2024
* Bundle web-ui v2.2.50
* Symbolic links support for project export/import
* Add comment to indicate sentry-sdk is optional. Ref https://github.com/GNS3/gns3-server/issues/2423
* Fix issues with recent busybox versions
* Support to reset MAC addresses for Docker nodes and some adjustments for fast duplication.
* Update README.md to change the minimum required Python version.
* Faster project duplication for local projects (no remote compute)
* Improve error message when a project cannot be parsed.
* Fix for running Docker containers with user namespaces enabled
* Support for configuring MAC address in Docker containers
* Upgrade aiohttp to v3.10.3
## 3.0.0rc1 11/08/2024
* Bundle web-ui v3.0.0rc1
* Convert topologies < 3.0 to have valid node hostnames
* Fix to access resources_path and install_builtin_appliances settings
## 2.2.49 06/08/2024
* Bundle web-ui v2.2.49
* Forbid -nic and -nicdev in Qemu additional options. Fixes https://github.com/GNS3/gns3-server/issues/2397
* Upgrade jsonschema and sentry-sdk packages
* Update IOU base configs to use "no ip domain lookup". Fixes #2404
## 2.2.48.1 12/07/2024
* Bundle web-ui v2.2.48.1
## 2.2.48 08/07/2024
* Bundle web-ui v2.2.48
* Add 'install_builtin_appliances' and 'resources_path' settings in the server config
* Option to keep the compute IDs unchanged when exporting a project
* Forbid unsafe Qemu additional options
* Fix error when snapshot exists with an underscore in the name
* Upgrade sentry-sdk, psutil and aiofiles packages
* Fix check for IPv6 enabled on host
## 3.0.0b3 19/05/2024
* Bundle web-ui v3.0.0b3
* Fix to allow duplicating IOS routers
* Fix to allow changing the auxiliary console for IOS router nodes.
* Replace deprecated method datetime.utcnow()
* Upgrade FastAPI to v0.111.0
* Fix reset console for non running IOU devices
* Do not allow to create a builtin template using the API.
* Use cryptography backend for python-jose. Ref #2372
## 2.2.47 15/05/2024
* Fix update-bundled-web-ui.sh script
* Bundle web-ui v2.2.47
* Change sentry-sdk version
* Upgrade aiohttp, sentry-sdk and truststore
* Upgrade jsonschema and aiohttp
* Drop Python 3.7
* Remove dev requirements for Python 3.6
* Do not run Docker VM tests on Windows
* Do not wait for the server to close when shutting down.
* Fix test create image with not supported characters by filesystem. Fixes #2375
* Allow listing x86_64 IOU images. Fixes #2376
* Upgrade Jinja2 to version 3.1.4. Fixes #2378
* Fix link capture for ATM switch. Fixes https://github.com/GNS3/gns3-gui/issues/3570
* Fix tests after updating error message when busybox is not installed.
* Add more details to error message when busybox is not installed. Fixes https://github.com/GNS3/gns3-gui/issues/3569
* Fix invalid escape sequences
* Add NAT symbols
* Fix cannot stop Docker VM while console connection is still active.
* Upgrade sentry-sdk to version 1.40.6
## 3.0.0b2 07/04/2024
* Bundle web-ui v3.0.0b2
* Fix cannot stop Docker VM while console connection is still active.
* Support for custom Qemu path in templates and nodes
* Fix CPU fractional values for Docker VMs.
* Use bcrypt directly instead of passlib
* Update CORS policy
* Do not stop searching for Qemu binaries if one binary cannot be executed. Ref #2306
* Fix Ethernet switch and Ethernet hub port validations. Fixes #2334
* Update CORS policy
## 2.2.46 26/02/2024
* Bundle web-ui v2.2.46
* Save empty directories when exporting a project
* Backport from v3: install Docker resources in a writable location at runtime.
* Use Docker API v1.24 to get version.
* Drop support for Python 3.6
* Address the telnet console bug.
* Update welcome.py
* Update remote-install.sh
* Use Python 3.8 to publish API doc
* Upgrade sentry-sdk, psutil and distro dependencies
## 2.2.45 12/01/2024
* Bundle web-ui v2.2.45
* Fix mouse offset issues with VNC in Qemu. Fixes #2335
* Add project.created, project.opened and project.deleted controller notification stream. Move project.updated and project.closed from project notification to controller notification stream.
* Do not stop searching for Qemu binaries if one binary cannot be executed. Ref #2306
* Fix Ethernet switch and Ethernet hub port validations. Fixes #2334
* Update CORS policy
* Add custom executable paths on Windows
* Upgrade sentry-sdk and aiohttp
## 3.0.0b1 27/11/2023
* Bundle web-ui v3.0.0b1
* Upgrade sentry-sdk to v1.37.1
* Upgrade aiohttp to v3.9.1
* Fix bug when listing endpoints for opened project
* Make images executable after importing a project
* Disable IOS hostname check for Dynamips ghost instances
## 3.0.0a6 15/11/2023
* Bundle web-ui v3.0.0a6
* Upgrade to aiohttp v3.9.0rc0
* Install Docker resources in writable location
* Default compute username is "gns3"
* Non-blocking checksums computation when server starts. Fixes #2228
* Fix timeout issue when creating Qemu disk image. Fixes https://github.com/GNS3/gns3-server/issues/2313
* Fix broken link to Web UI in 3.0 branch. Fixes #2312
* Catch exceptions when computing image checksums. Ref https://github.com/GNS3/gns3-server/issues/2228
* Add freeze_support() for multiprocessing
## 2.2.44 06/11/2023
* Bundle web-ui v2.2.44
* Non-blocking checksums computation when server starts. Fixes #2228
* Fix timeout issue when creating Qemu disk image. Fixes https://github.com/GNS3/gns3-server/issues/2313
* Support for web socket console over HTTPS
* Add back script create_cert.sh
* Allow disabling hardware virtualization check
* Fix L2IOU "failed code signing checks" when IOU base file name is >= 63 characters
* Change "ip cef" to "no ip cef" in IOU default configs. Fixes #2298
* Add Qemu IGB network device
* Add Python 3.12 support.
* Fix issue with importlib.resources.files() and Python 3.9
## 3.0.0a5 27/10/2023
* Bundle web-ui v3.0.0a5
* Fix L2IOU "failed code signing checks" when IOU base file name is >= 63 characters
* Python 3.12 support
* Add igb Qemu adapter
* Change "ip cef" to "no ip cef" in IOU default configs. Fixes #2298
* Drop support for Python 3.7 and upgrade dependencies
* Fix compute authentication for websocket endpoints
* Add Qemu IGB network device
## 3.0.0a4 18/10/2023
* Bundle web-ui v3.0.0a4
* Do not enforce Compute.Audit and Template.Audit privileges due to current web-ui limitations
* Support to create empty disk images on the controller
* Fix issue with importlib.resources.files() and Python 3.9
* New RBAC system with resource pools support.
* Use controller vars file to store version and appliance etag
* Pydantic v2 migration
* Allow connection to ws console over IPv6
* Allow computes to be dynamically or manually allocated
* Add UEFI boot mode option for Qemu VMs
* Mark VMware and VirtualBox support as deprecated
* Make port name for custom adapters optional. Fixes https://github.com/GNS3/gns3-web-ui/issues/1430
* Support for database schema migrations using alembic
* Add config option to change the server name. Ref #2149
* Option to disable image discovery and do not scan parent directory
* Allow raw images by default. Fixes https://github.com/GNS3/gns3-server/issues/2097
* Fix bug when creating Dynamips router with chassis setting
* Stricter checks to create/update an Ethernet switch and add tests
* Fix schema for removing WICs from Cisco routers. Fixes #3392
* Fix some issues with HTTP notification streams
* API endpoint to get the locked status of a project
* Global project lock and unlock
* Require name for custom adapters. Fixes #2098
* Allow empty adapter slots for Dynamips templates. Ref https://github.com/GNS3/gns3-gui/issues/3373
* Custom adapters should not be in node (compute) properties returned to clients. Fixes https://github.com/GNS3/gns3-gui/issues/3366
* Optionally allow Qemu raw images
* Ignore image detection for IOU user libraries in image directory
* Checks for valid hostname on server side for Dynamips, IOU, Qemu and Docker nodes
* Only check files (not directories) when looking for new images on file system.
* Support user defined loader/libraries to run IOU
* Remove explicit Response for VPCS endpoints returning HTTP 204 status code
* Remove explicit Response for endpoints returning HTTP 204 status code
* Make 'vendor_url' and 'maintainer_email' optional for template validation.
* Allow auth token to be passed as a URL param
* Add controller endpoints to get VirtualBox VMs, VMware VMs and Docker images
* Detect new images added to the default image directory. * Images can be present before the server starts or while it is running * Images are recorded in the database
* Support delete Qemu disk image from API Return the real disk image name in the 'hdx_disk_image_backed' property for Qemu VMs
* Fix ComputeConflictError import
* Handle creating Qemu disk images and resizing
* Finish to clean up local setting usage. Ref #1460
* "Local" command line parameter is only for stopping a server that has been started by the desktop GUI
* Fix AsyncSession handling after breaking changes in FastAPI 0.74.0 See https://github.com/tiangolo/fastapi/releases/tag/0.74.0 for details.
* Detect image type instead of requesting it from user
* Add connect endpoint for computes Param to connect to compute after creation Report compute unauthorized HTTP errors to client
* Replace CORS origins by origin regex
* Allow empty compute_id. Ref #1657
* Secure controller to compute communication using HTTP basic authentication
* Secure websocket endpoints
* Allocate compute when compute_id is unset
* Return the current controller hostname/IP from any compute
* Remove Qemu legacy networking support
* Appliance management refactoring: * Install an appliance based on selected version * Each template have unique name and version * Allow to download an appliance file
* Add isolate and unisolate endpoints. Ref https://github.com/GNS3/gns3-gui/issues/3190
* Allow images to be stored in subdirs and used by templates.
* Use uuid5 to create new compute_id. Fixes #1641 #1887
* Migrate PCAP streaming code to work with FastAPI.
* Refactor WebSocket console code to work with FastAPI. Fix endpoint routes.
## 2.2.43 19/09/2023
* Force English output for VBoxManage. Fixes #2266
* Automatically add vboxnet and DHCP server if not present for VirtualBox GNS3 VM. Ref #2266
* Fix issue with controller config saved before checking current version with previous one
* Prevent X11 socket file to be modified by Docker container
* Use the user data dir to store built-in appliances
* Catch ConnectionResetError exception when client disconnects
* Upgrade to PyQt 5.15.9 and pywin32
## 2.2.42 09/08/2023
* Bundle web-ui v2.2.42
* Handle API version key in VirtualBox 7. Fixes #2266
* Enable system certificate store for SSL connections
* Use DEFAULT_BUFFER_SIZE for md5sum
* Fix version check when installing appliances. Ref https://github.com/GNS3/gns3-gui/issues/3486
* Allow connection to ws console over IPv6. Fixes https://github.com/GNS3/gns3-web-ui/issues/1400
* Support for Python 3.12
* Remove import urllib3 and let sentry_sdk import and patch it. Fixes https://github.com/GNS3/gns3-gui/issues/3498
## 2.2.41 12/07/2023
* Bundle web-ui v2.2.41
* Catch urllib3 exceptions when sending crash report. Ref https://github.com/GNS3/gns3-gui/issues/3483
* Only fetch Qemu version once when starting Qemu + only add speed/duplex for virtio-net-pci with Qemu version >= 2.12
* Use recent OVMF firmware (stable-202305) and use flash drives to configure Qemu command line
* Remove the useless executable permissions to the file gns3server/disks/empty8G.qcow2
* Backport UEFI boot mode support for Qemu VMs
## 2.2.40.1 10/06/2023
* Re-bundle Web-Ui v2.2.40. Fixes #2239
## 2.2.40 06/06/2023
* qemu : with network adapter_type equal to "virtio-net-pci", fix the speed to 10000 and duplex to full. The values are actually fake. (https://github.com/GNS3/gns3-gui/issues/3476)
* Parse name for request to node creation from template
* Remove Xvfb + x11vnc support
* Require a Host-Only Network to start the VirtualBox GNS3 VM on macOS with VirtualBox 7
* Catch ConnectionResetError when waiting for the wrap console
* Fix open IPv6 address for HTTP consoles on controller. Fixes https://github.com/GNS3/gns3-gui/issues/3448
* Use proc.communicate() when checking for subprocess output As recommended in https://docs.python.org/3/library/asyncio-subprocess.html#asyncio.subprocess.Process.stderr
## 2.2.39 08/05/2023
* Install web-ui v2.2.39
* Add generic function to install resource files
* Install empty Qemu disks on first start
* Check for colon in project name. Fixes #2203
* Upgrade distro and aiohttp dependencies
## 2.2.38 28/02/2023
* Bundle web-ui v2.2.38
* Fix c7200_i0_log.txt is created in the current directory. Fixes #2191
* Check swtpm version and start swtpm before qemu
* Fix broken websocket console with Python 3.11
* Fix "cannot reopen console". Ref #2182
* Fix Qemu binary not set when adding appliance from template
## 2.2.37 25/01/2023
* Fix link communication issues on Windows with uBridge
* Fix StreamWriter doesn't have the wait_closed() method in Python3.6. Fixes #2170
* Install built-in appliances when no previous version has been detected. Fixes #2168
* Update documentation to install gns3-server. Fixes #2124
* Give udhcpc executable right. Fixes #2159
## 2.2.36 04/01/2023
* Install web-ui v2.2.36
* Add Trusted Platform Module (TPM) support for Qemu VMs
* Require Dynamips 0.2.23 and bind Dynamips hypervisor on 127.0.0.1
* Delete the built-in appliance directory before installing updated files
* Use a stock BusyBox for the Docker integration
* Overwrite built-in appliance files when starting a more recent version of the server
* Fix reset console. Fixes #1619
* Only use importlib_resources for Python <= 3.9. Fixes #2147
* Support when the user field defined in Docker container is an ID. Fixes #2134
## 3.0.0a3 27/12/2022
* Add web-ui v3.0.0a3
* Add config option to change the server name. Ref #2149
* Option to disable image discovery and do not scan parent directory
* Allow raw images by default. Fixes https://github.com/GNS3/gns3-server/issues/2097
* Fix bug when creating Dynamips router with chassis setting
* Stricter checks to create/update an Ethernet switch and add tests
* Fix schema for removing WICs from Cisco routers. Fixes #3392
* Fix issues with VMnet interface on macOS >= 11.0. Ref #3381
* Use importlib_resources instead of pkg_resources and install built-in appliances in config dir.
* Fix console vnc don't use configured ports in some case. Fixes #2111
* Add missing VMware settings in gns3_server.conf
* Make version PEP 440 compliant
* Support for Python 3.11
* Allow for more dependency versions at patch level
* gns3.service.openrc: make openrc script posix compliant
* fix: use exact match to find interface in windows to avoid get wrong interface
## 3.0.0a2 06/09/2022
* Add web-ui v3.0.0a2
* Upgrade FastAPI to v0.82.0
* API endpoint to get the locked status of a project
* Global project lock and unlock
* Update appliance files
* Require name for custom adapters. Fixes #2098
* Allow empty adapter slots for Dynamips templates. Ref https://github.com/GNS3/gns3-gui/issues/3373
* Use original $PATH in init.sh for Docker containers. Ref #2069
## 3.0.0a1 04/08/2022
* Bundle gns3-web-ui v3.0.0a1
* Use default symbol theme if none is provided when loading appliances
* Allow default symbol theme to be configured in config file
* Optionally allow Qemu raw images
* Ignore image detection for IOU user libraries in image directory
* Don't show optional token param in API docs
* Fix check for 32-bit in ELF header
* Checks for valid hostname on server side for Dynamips, IOU, Qemu and Docker nodes
* Only check files (not directories) when looking for new images on file system.
* Support user defined loader/libraries to run IOU
* Make 'vendor_url' and 'maintainer_email' optional for template validation.
* Allow auth token to be passed as a URL param
* HTTP middleware create issues when streaming project archive
* Add zstandard compression support for project export
* Make sure that the temporary image file is removed after uploading an image
* Do not cache to md5sum file in some situations
* Detect new images added to the default image directory. * Images can be present before the server starts or while it is running * Images are recorded in the database
* Support delete Qemu disk image from API Return the real disk image name in the 'hdx_disk_image_backed' property for Qemu VMs
* Handle creating Qemu disk images and resizing
* Finish to clean up local setting usage. Ref #1460
* "Local" command line parameter is only for stopping a server that has been started by the desktop GUI
* Fix AsyncSession handling after breaking changes in FastAPI 0.74.0 See https://github.com/tiangolo/fastapi/releases/tag/0.74.0 for details.
* Detect image type instead of requesting it from user
* Drop Python 3.6 support and require Python >= 3.7
* Drop Windows support
* Add connect endpoint for computes Param to connect to compute after creation Report compute unauthorized HTTP errors to client
* Replace CORS origins by origin regex
* Change default config settings
* Update Docker image for tests
* Fix calls to static methods in server.py
* Do not require the local server param to open a .gns3 file. Fixes https://github.com/GNS3/gns3-gui/issues/2421 Ref #1460
* Do not automatically install appliance after uploading image
* Ignore OSError when closing websocket
* Allow empty compute_id. Ref #1657
* Secure controller to compute communication using HTTP basic authentication
* Secure websocket endpoints
* Fix issue when updating a template
* Allocate compute when compute_id is unset
* Return the current controller hostname/IP from any compute
* Remove Qemu legacy networking support
* Add a custom version to an appliance
* Appliance management refactoring: * Install an appliance based on selected version * Each template have unique name and version * Allow to download an appliance file
* Finalize image management refactoring and auto install appliance if possible
* Sqlite doesn't allow BigInteger to be used as an primary key with autoincrement
* Add isolate and unisolate endpoints. Ref https://github.com/GNS3/gns3-gui/issues/3190
* Small db tables adjustments
* Add index for "name" field in role table
* Allow images to be stored in subdirs and used by templates.
* Option to prune images when deleting template.
* Associate images when creating or updating a template.
* Add prune images endpoint. Use many-to-many relationship between images and templates.
* Check if user has the right to add a permission
* Only use the necessary HTTP methods for default permissions
* Add /permissions/prune to delete orphaned permissions
* Check a permission matches an existing route before it is allowed to be created.
* Remove busybox and copy system busybox in setup.py
* Save image size + start to automatic template creation based on image checksum.
* Upgrade dependencies
* Fix "-machine accel=tcg" check
* Allow logged in user to change some of its data. Administrators can lock users using the `is_active` field.
* Change RBAC field names from builtin to is_builtin
* Add user permissions + RBAC tests.
* Add description for user permission.
* Save/restore appliances Etag.
* Allow to set the initial super admin username / password in server config file. Ref #1857
* Require authentication for get_user_memberships endpoint.
* Change method to prevent forbidden directory traversal. Ref #1894
* Add user groups support.
* Add delete cascade on foreign keys for appliance table
* Enable SQL foreign key support for SQLite
* Add missing CORS origins.
* Show topology path when check topology schema fails.
* Protect controller notification endpoints. Ref #1888 (WebSocket endpoint is not secured, it takes an optional token).
* Use uuid5 to create new compute_id. Fixes #1641 #1887
* Protect the API and add alternative authentication endpoint.
* Secure users API and handle manual password recovery.
* Add default super admin account in controller db.
* Complete type annotations for API endpoints.
* Detect the app is exiting and avoid reconnecting to computes.
* Move schemas between compute and controller subpackages
* Remove traceng code.
* Move error responses to API routers.
* Wait for local compute to be started. Don't reconnect to local compute when server is being stopped.
* Rename ssl and auth configuration file settings. Add enable SSL config validator. Strict configuration file validation: any error will prevent the server to start. Core server logic moved to a Server class.
* Generate new config for each test. Fixes tests.
* Use Pydantic to validate the server config file.
* Add symbol dimensions endpoint and SSL support for packet capture with remote HTTPS server.
* Save computes to database
* Generate a new list in template schema defaults.
* Generate JWT secret key if none is configured in the config file. Change location of the database.
* User authentication with tests.
* Refactor tests and start work on database integration.
* Move endpoints to routes & preparations to use a database.
* Providing the path to create a project is now deprecated.
* Add back script to create a self-signed SSL certificate.
* Make sure all HTTP exceptions return JSON with a "message" field instead of "detail"
* Make Swagger Ui the default for API documentation
* Move to version 3 of the REST API. Rename packet capture endpoints.
* Use pydantic for data validation (instead of jsonschema) Fix/improve various pydantic schema models.
* Automate API documentation publishing.
* Publish API documentation generated by FastAPI.
* Overwrite uvicorn loggers.
* Do not automatically connect to local compute.
* Add HTTP client to reuse the aiohttp session where needed. Remove unnecessary aiohttp exceptions.
* Warn not to use the private compute API. Fixes #1593.
* Migrate PCAP streaming code to work with FastAPI.
* Refactor WebSocket console code to work with FastAPI. Fix endpoint routes.
* Use dependencies and group common HTTP responses in endpoints.
* Migration to FastAPI
* Prioritize the config disk over HD-D for Qemu VMs. Fixes https://github.com/GNS3/gns3-gui/issues/3036
* Create config disk property false by default for Qemu templates
* Set default disk interface type to "none". Fail-safe: use "ide" if an image is set but no interface type is configured. Use the HDA disk interface type if none has been configured for HDD.
* Add explicit option to automatically create or not the config disk. Off by default.
* Auxiliary console support for Qemu. Ref #2873 Improvements for auxiliary console support for Docker and Dynamips.
* Fix AUX console not allocated for Dynamips IOS routers.
* Disallow to rename a running node. Fixes https://github.com/GNS3/gns3-gui/issues/2499
* Support to reset all console connections. Ref https://github.com/GNS3/gns3-server/issues/1619
* Support to reset links. Fixes https://github.com/GNS3/gns3-server/issues/1620
* Add maxcpus property for Qemu VMs. Ref #1674
* QEMU config disk support
* Read folder structure correctly for custom symbols. Fixes https://github.com/GNS3/gns3-gui/issues/2856
* Add total RAM, CPUs and disk size to servers summary as well as disk usage in percent. Fixes https://github.com/GNS3/gns3-server/issues/1532
* Resource constraints for Docker VMs.
* Update IOUtools. Ref #1627
* Use parent directory as working directory for project duplication and snapshots. Fixes https://github.com/GNS3/gns3-gui/issues/2909
* Support for "usage" for "Cloud" nodes. Fixes https://github.com/GNS3/gns3-gui/issues/2887 Allow "usage" for all builtin nodes (not exposed in Ui).
## 2.2.34 28/08/2022
* Use original $PATH in init.sh for Docker containers. Ref #2069
* Support pytest-asyncio 0.19.0
* Upgrade dev dependencies and fix issues after upgrading to pytest-aiohttp v1.0.4
* Update compute.py
## 2.2.33.1 21/06/2022
* Add missing file for web-ui v2.2.33
## 2.2.33 20/06/2022
* Release web-ui v2.2.33
* Upgrade sentry-sdk and psutil
* Remove parameter "Name" not useful to create a Docker container
* Support to reset all console connections. Ref https://github.com/GNS3/gns3-server/issues/1619
* Config option to disable built-in templates
* Add hostname entry to sample network config for Docker nodes. Fixes #2039
* Run Xtigervnc with MIT-SHM extension disabled for Docker VNC console support. Fixes #2071
* Added OpenRC init script
## 2.2.32 27/04/2022
* Docker: load custom interface files from /etc/network/interfaces (commented by default). Ref #2052
* Release web UI 2.2.32
* Create `/etc/network/interfaces.d` in Docker container. Fixes #2052
* Fix error when updating a link style. Fixes https://github.com/GNS3/gns3-gui/issues/2461
* Some fixes for early support for Python3.10 The loop parameter has been removed from most of asyncio‘s high-level API following deprecation in Python 3.8.
* Early support for Python3.10 Fixes #1940
* Bump pywin32 from 300 to 301
## 2.2.23 05/08/2021
* Release web UI 2.2.23
* Fix hostname inconsistencies during script execution
* Add option `--without-kvm`
* Add a `reload` server endpoint. Fixes #1926
* Handle -no-kvm param deprecated in Qemu >= v5.2
* Fix binary websocket access to the console
* Change how to generate random MAC addresses
* setup.py: prevent installing tests directory
* Support cloning of encrypted qcow2 base image files
* Fix VMware VM support on Linux and Windows. Fixes #1919
## 2.2.22 10/06/2021
* Fix VMware support on macOS BigSur
* Link style support. Fixes https://github.com/GNS3/gns3-gui/issues/2461
* Release web UI version 2.2.22
* Preserve auto_start/auto_open/auto_close when restoring snapshot
* Fix uBridge errors for cloud nodes not visible in logs. Fixes #1895
* Prevent directory traversal. Fixes #1894
## 2.2.21 10/05/2021
* Release Web-Ui v2.2.21
* Improvements for get symbol dimensions endpoint. Ref #1885
## 2.2.20 09/04/2021
* Release Web UI version 2.2.20
* Fix packet capture with HTTPS remote server. Fixes #1882
* Sync appliance files and remove old ones after sync with online repo. Fixes #1876
* Upgrade dependencies
* Fix export for missing files
* Fix issue when trying to export temporary Dynamips files.
## 2.2.19 05/03/2021
* Launch projects marked for auto open after SIGHUP is received
* Release Web UI 2.2.19
* Fix console type error when creating Ethernet switch node. Fixes #1873
* Upgrade Jinja to version 2.11.3. Fixes #1865
## 2.2.18 16/02/2021
* SIGHUP: remove projects with an empty project directory.
* Release Web UI 2.2.18
* Catch OSError exception in psutil. Fixes https://github.com/GNS3/gns3-gui/issues/3127
* Expose 'auto_open' and 'auto_start' properties in API when creating project. Fixes https://github.com/GNS3/gns3-gui/issues/3119
* Fix warning: 'ide-drive' is deprecated when using recent version of Qemu. Fixes https://github.com/GNS3/gns3-gui/issues/3101
* Fix bug when starting of vpcs stopped with "quit". Fixes https://github.com/GNS3/gns3-gui/issues/3110
* Fix WinError 0 handling
* Stop uBridge if VPCS node has been terminated. Ref https://github.com/GNS3/gns3-gui/issues/3110
* Allow cloned QEMU disk images to be resized before the node starts, by cloning the disk image in response to a resize request instead of waiting until the node starts.
* Fix(readme): update python version from 3.5.3 to 3.6
* Use HDD disk image as startup QEMU config disk
* Create config disk property false by default for Qemu templates
* Set default disk interface type to "none".
* Add explicit option to automatically create or not the config disk. Off by default.
* QEMU config disk support
## 2.2.17 04/12/2020
* Close and remove projects deleted from disks after SIGHUP signal is received.
* Release Web Ui 2.2.17
* New config file options to configure the VNC console port range.
* Use asyncio.all_tasks instead of deprecated method for Python 3.9 compatibility.
## 2.2.16 05/11/2020
* Option to allocate or not the vCPUs and RAM settings for the GNS3 VM. Fixes https://github.com/GNS3/gns3-gui/issues/3069
* Release Web UI version 2.2.16
* Fix wrong defaults for images_path, configs_path, appliances_path. Fixes #1829
* Use EnvironmentFile for Systemd service. Ref https://github.com/GNS3/gns3-gui/issues/3048
* Fix SSL support for controller and local compute. Fixes #1826
* Prevent WIC to be added/removed while Dynamips router is running. Fixes https://github.com/GNS3/gns3-gui/issues/3082
* Fix bug with application id allocation for IOU nodes. Fixes #3079
* Allow commas in image paths and VM name for Qemu VMs. Fixes https://github.com/GNS3/gns3-gui/issues/3065
* Wait longer for x11 socket file to be created. Ref #1761
* Allow Hyper-V to run on AMD when Windows 10 build 19640 or later is detected. Fixes #1777
* Show error message if IPv6 is not enabled when using SPICE console. Fixes #1772
* Move jsonschema 2.6.0 requirement in build repository.
* Only use jsonschema 2.6.0 on Windows and macOS.
* Disable default integrations for sentry sdk.
* Remove unused bytes2human function.
## 2.2.9 04/06/2020
* Release Web-Ui version 2020.2.0-beta.4
* Support to activate/deactive network connection state replication in Qemu.
* Possible fix for problem connecting to the GNS3 VM. Ref https://github.com/GNS3/gns3-gui/issues/2969 #1760
* Option to reset or not all MAC addresses when exporting or duplicating a project.
* Fix bug when changing properties for closed project. Fixes #1754
* Fix issues with crash reporting & bump version to 2.2.9dev2. Ref https://github.com/GNS3/gns3-server/issues/1758
* Lock listing VMs. Ref #1755
* Try to fix error when listing Hyper-V VMs. Ref #1755
* Catch VirtualBox errors when listing VMs. Fixes #1759
* Deprecate running with Python 3.5
* aiocontextvars is only necessary for Python < 3.7
* Replace Raven by Sentry SDK. Fixes https://github.com/GNS3/gns3-server/issues/1758
* Require setuptools>=17.1 in setup.py. Ref https://github.com/GNS3/gns3-server/issues/1751 This is to support environmental markers. https://github.com/pypa/setuptools/blob/master/CHANGES.rst#171
## 2.2.8 07/05/2020
* Release Web-Ui 2020.2.0-beta.3
* Default port set to 80 for server running in the GNS3 VM. Fixes #1737
* Make the Web UI the default page. Ref https://github.com/GNS3/gns3-server/issues/1737
* Support controller reloading for templates, appliances and projects. Ref #1743
* Return exit status 1 if server fails to start. Fixes #1744
* Use Environmental Markers to force jsonschema version. Fixes https://github.com/GNS3/gns3-gui/issues/2849 Version 3.2.0 with Python >= 3.8 Version 2.6.0 with Python < 3.8
* Use Environmental Markers to force jsonschema version 2.6.0 on Windows/macOS. Ref https://github.com/GNS3/gns3-gui/issues/2849
* Implement a minimum interval between cpu_percent() calls. Fixes #1738
* Add clipboard support for TigerVnc
* Sort snapshots by (created_at, name)
* Unprotected access for websocket consoles. Ref https://github.com/GNS3/gns3-gui/issues/2883#issuecomment-580677552
* Support for WebSocket consoles
* Return array for controller statistics endpoint
* Server statistics implementation
## 2.2.7 07/04/2020
* Release 2020.2.0-beta.1
* Fix uBrigde error popups when Docker image has stopped. Fixes https://github.com/GNS3/gns3-gui/issues/2957
* Fix warning that you are explicitly comparing literals
## 2.2.6 26/03/2020
* Remove --local when starting Docker dev server.
* Release 2020.1.0-alpha.1
* Monitor ubrige processes.
* Add Xvnc command to the VNC servers list. Fixes #172
* Allow controller to reconnect to compute if communication is lost. Ref #1634
* Improvement of support for docker USER directive. Fixes #1727.
* Fix cannot delete Dynamips router the content of the "usage" field. Fixes https://github.com/GNS3/gns3-gui/issues/2947
* Prevent locked drawings to be deleted. Fixes https://github.com/GNS3/gns3-gui/issues/2948
* Fix issues with empty project variables. Fixes https://github.com/GNS3/gns3-gui/issues/2941
* Upgrade psutil to version 5.6.6 due to CVE-2019-18874 https://github.com/advisories/GHSA-qfc5-mcwq-26q8
* Remove 'format=raw' from the Qemu options of the disk interfaces. Ref #1699
* Allocate application IDs for IOU nodes on the controller. An application ID is used by IOU to generate its interface Mac addresses. They must be unique across all opened projects sharing the same computes to avoid Mac address collisions.
* Require VirtualBox >= 6.0 on AMD and >= 6.1 on Intel processors (for GNS3 VM only). Fixes #1610
* Add nvme disk interface and fix scsi disk interface for Qemu VMs.
* Disallow using "legacy networking mode" with Qemu >= 2.9.0
* Add latest Qemu nic models.
* Attempt to fix error when loading wmi module. Fixes #1712
* Handle "aborted" state for VirtualBox VMs. Fixes #1702
* Change how Hyper-V VMs are found. Ref #1612
## 2.2.5 09/01/2020
* No changes
## 2.2.4 08/01/2020
* Accept a node name when creating a node from a template using the API. Fixes #1708
* Disallow to modify a template if changes cannot be written on disk. Fixes #1695
* Fix renaming IOL hostname replaces %h only in a single place. Fixes #1707
* Add symbols_path
* Bundle Web Ui version 2019.2.0-alpha.11
* Change the default UDP port range to be 20000 to 30000 in gns3_server.conf Ref #1271
* Fix cannot power on VirtualBox VM in saved state. Ref #1702
## 2.2.3 12/11/2019
* Improved how the path to the config file is actually determined
* Return HTTP status code 204 in API when project successfully closed. Fixes #1689
The GNS3 server manages emulators and other virtualization software such as Dynamips, Qemu/KVM, Docker, VPCS, VirtualBox and VMware Workstation.
Clients like the [GNS3 GUI](https://github.com/GNS3/gns3-gui/) and the [GNS3 Web UI](https://github.com/GNS3/gns3-web-ui/) control the server using a HTTP REST API.
## Installation
These instructions are for using GNS3, please see below for development.
### Windows & macOS
Please use our [Windows installer or DMG package](https://gns3.com/software/download) to install the stable build along with the GNS3 VM.
Note that as of GNS3 version above 3.0, you must run the server using the GNS3 VM or on a Linux system (remote, cloud or virtual machine).
### Linux
#### Ubuntu based distributions
We build and test packages for actively supported Ubuntu versions.
Other distros based on Ubuntu, like Mint, should also be supported.
Packages can be installed from our Personal Package Archives (PPA) repository:
```shell
sudo apt update
sudo apt install software-properties-common
sudo add-apt-repository ppa:gns3/ppa
sudo apt update
sudo apt install gns3-gui gns3-server
```
#### Other Linux distributions
GNS3 is often packaged for other distributions by third-parties:
You may use PyPi in case no package is provided, or you would like to do a manual installation:
* https://pypi.org/project/gns3-server/
* https://pypi.org/project/gns3-gui/
```shell
python3 -m pip install gns3-gui
python3 -m pip install gns3-server
```
The downside of this method is you will have to manually install all dependencies (see below).
Please see our [documentation](https://docs.gns3.com/docs/getting-started/installation/linux) for more details.
### Software dependencies
In addition to Python dependencies, other software may be required, recommended or optional.
* [uBridge](https://github.com/GNS3/ubridge/) is required, it interconnects the nodes.
* [Dynamips](https://github.com/GNS3/dynamips/) is required for running IOS routers (using real IOS images) as well as the internal switches and hubs.
* [VPCS](https://github.com/GNS3/vpcs/) is recommended, it is a builtin node simulating a very simple computer to perform connectivity tests using ping, traceroute etc.
* Qemu is strongly recommended as most node types are based on Qemu, for example Cisco IOSv and Arista vEOS.
* libvirt is recommended as it's needed for the NAT cloud.
* Docker is optional, some nodes are based on Docker.
* mtools is recommended to support data transfer to/from QEMU VMs using virtual disks.
* i386-libraries of libc and libcrypto are optional, they are only needed to run IOU based nodes.
Note that Docker needs the script program (`bsdutils` or `util-linux` package), when running a Docker VM and a static busybox during installation (python3 setup.py install / pip3 install / package creation).
## Development
### Setting up
These commands will install the server as well as all Python dependencies:
```shell
git clone https://github.com/GNS3/gns3-server
cd gns3-server
git checkout 3.0
python3 -m venv venv-gns3server
source venv-gns3server/bin/activate
python3 -m pip install .
python3 -m gns3server
```
You will have to manually install other software dependencies (see above), for Dynamips, VPCS and uBridge the easiest is to install from our PPA.
### Docker container
Alternatively, you can run the GNS3 server in a container
```shell
bash scripts/docker_dev_server.sh
```
### Running tests
First, install the development dependencies:
```shell
python3 -m pip install -r dev-requirements.txt
```
Then run the tests using pytest:
```shell
python3 -m pytest -vv tests/
```
### API documentation
The API documentation can be accessed when running the server locally:
* On `http://IP:PORT/docs` to see with Swagger UI (i.e. `http://localhost:3080/docs`)
* On `http://IP:PORT/redoc` to see with ReDoc (i.e. `http://localhost:3080/redoc`)
The documentation can also be viewed [online](http://apiv3.gns3.net) however it may not be the most up-to-date version since it needs manually synchronization with the current code. Also, you cannot use this to interact with a GNS3 server.
### Branches
#### master
master is the next stable release, you can test it in your day-to -day activities.
Bug fixes or small improvements pull requests go here.
3.x development brand for the next major release.
**Never** use this branch for production. Pull requests for major new features go here.
These are the versions of the GNS3 server that are
currently being supported with security updates.
| Version | Supported |
| ------- | ------------------ |
| 3.x.x | :white_check_mark: |
| 2.2.x | :white_check_mark: |
| 2.1.x | :x: |
| 1.x.x | :x: |
## Reporting a Vulnerability
Please use GitHub's report a vulnerability feature. More information can be found in https://docs.github.com/en/code-security/security-advisories/guidance-on-reporting-and-writing/privately-reporting-a-security-vulnerability
; Option to automatically send crash reports to the GNS3 team
report_errors = True
; First console port of the range allocated to devices
console_start_port_range = 5000
; Last console port of the range allocated to devices
console_end_port_range = 10000
; First port of the range allocated for inter-device communication. Two ports are allocated per link.
udp_start_port_range = 10000
; Last port of the range allocated for inter-device communication. Two ports are allocated per link
udp_end_port_range = 20000
; uBridge executable location, default: search in PATH
;ubridge_path = ubridge
; Option to enable HTTP authentication.
auth = False
; Username for HTTP authentication.
user = gns3
; Password for HTTP authentication.
password = gns3
; Only allow these interfaces to be used by GNS3, for the Cloud node for example (Linux/OSX only)
; Do not forget to allow virbr0 in order for the NAT node to work
allowed_interfaces = eth0,eth1,virbr0
; Specify the NAT interface to be used by the NAT node
; Default is virbr0 on Linux (requires libvirt) and vmnet8 for other platforms (requires VMware)
default_nat_interface = vmnet10
[VPCS]
; VPCS executable location, default: search in PATH
;vpcs_path = vpcs
[Dynamips]
; Enable auxiliary console ports on IOS routers
allocate_aux_console_ports = False
mmap_support = True
; Dynamips executable path, default: search in PATH
;dynamips_path = dynamips
sparse_memory_support = True
ghost_ios_support = True
[IOU]
; Path of your .iourc file. If not provided, the file is searched in $HOME/.iourc
iourc_path = /home/gns3/.iourc
; Validate if the iourc license file is correct. If you turn this off and your licence is invalid IOU will not start and no errors will be shown.
license_check = True
[Qemu]
; !! Remember to add the gns3 user to the KVM group, otherwise you will not have read / write permissions to /dev/kvm !! (Linux only, has priority over enable_hardware_acceleration)
enable_kvm = True
; Require KVM to be installed in order to start VMs (Linux only, has priority over require_hardware_acceleration)
require_kvm = True
; Enable hardware acceleration (all platforms)
enable_hardware_acceleration = True
; Require hardware acceleration in order to start VMs (all platforms)
$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/cloud/nodes/ec789e80-aa34-4140-8eb5-e5495d6cf484/adapters/0/ports/0/start_capture' -d '{"capture_file_name": "test.pcap", "data_link_type": "DLT_EN10MB"}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/cloud/nodes/ec789e80-aa34-4140-8eb5-e5495d6cf484/adapters/0/ports/0/start_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/cloud/nodes/6bb07d01-3b9a-4e8e-b7b2-036c287a5d81/adapters/0/ports/0/stop_capture' -d '{}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/cloud/nodes/6bb07d01-3b9a-4e8e-b7b2-036c287a5d81/adapters/0/ports/0/stop_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/docker/nodes/ddde0941-7525-479f-80b5-58b4492a7960/adapters/0/ports/0/start_capture' -d '{"capture_file_name": "test.pcap", "data_link_type": "DLT_EN10MB"}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/docker/nodes/ddde0941-7525-479f-80b5-58b4492a7960/adapters/0/ports/0/start_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/docker/nodes/5d411a1e-1ba7-4c30-b4db-25b43f073ead/adapters/0/ports/0/stop_capture' -d '{}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/docker/nodes/5d411a1e-1ba7-4c30-b4db-25b43f073ead/adapters/0/ports/0/stop_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/iou/nodes/e7073402-19c2-4a1b-845c-e74b5d967b74/adapters/0/ports/0/start_capture' -d '{"capture_file_name": "test.pcap", "data_link_type": "DLT_EN10MB"}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/iou/nodes/e7073402-19c2-4a1b-845c-e74b5d967b74/adapters/0/ports/0/start_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/nat/nodes/c62e3fb9-f905-4235-aea4-b56a0158138c/adapters/0/ports/0/start_capture' -d '{"capture_file_name": "test.pcap", "data_link_type": "DLT_EN10MB"}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/nat/nodes/c62e3fb9-f905-4235-aea4-b56a0158138c/adapters/0/ports/0/start_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/qemu/nodes/32bd5c53-808a-4613-ad96-cfa861cd433b/adapters/0/ports/0/start_capture' -d '{"capture_file_name": "test.pcap", "data_link_type": "DLT_EN10MB"}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/qemu/nodes/32bd5c53-808a-4613-ad96-cfa861cd433b/adapters/0/ports/0/start_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/qemu/nodes/4dd12206-778c-475f-9113-9dd106ff1367/adapters/0/ports/0/stop_capture' -d '{}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/qemu/nodes/4dd12206-778c-475f-9113-9dd106ff1367/adapters/0/ports/0/stop_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/traceng/nodes/a8d3f085-2e02-4299-b0d0-053df793c277/adapters/0/ports/0/start_capture' -d '{"capture_file_name": "test.pcap", "data_link_type": "DLT_EN10MB"}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/traceng/nodes/a8d3f085-2e02-4299-b0d0-053df793c277/adapters/0/ports/0/start_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/traceng/nodes/539f741f-4bfe-4ab6-aa53-8621d0516b1d/adapters/0/ports/0/stop_capture' -d '{}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/traceng/nodes/539f741f-4bfe-4ab6-aa53-8621d0516b1d/adapters/0/ports/0/stop_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/virtualbox/nodes/9aa2e53f-0d80-4e28-8d0f-9073a70109a8/adapters/0/ports/0/start_capture' -d '{"capture_file_name": "test.pcap", "data_link_type": "DLT_EN10MB"}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/virtualbox/nodes/9aa2e53f-0d80-4e28-8d0f-9073a70109a8/adapters/0/ports/0/start_capture HTTP/1.1
curl -i -X POST 'http://localhost:3080/v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/virtualbox/nodes/63aaf9df-d7f7-4f0d-9fd4-2c92aa919452/adapters/0/ports/0/stop_capture' -d '{}'
POST /v2/compute/projects/a1e920ca-338a-4e9f-b363-aa607b09dd80/virtualbox/nodes/63aaf9df-d7f7-4f0d-9fd4-2c92aa919452/adapters/0/ports/0/stop_capture HTTP/1.1
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
