mirror of
https://github.com/genodelabs/genode.git
synced 2024-12-19 13:47:56 +00:00
307 lines
8.9 KiB
Plaintext
307 lines
8.9 KiB
Plaintext
#
|
|
# USB HID test
|
|
#
|
|
# By default, the run script runs interactively and reports any received USB
|
|
# input events to the console.
|
|
#
|
|
# When run with the '--autopilot' run option, the run script tests the USB
|
|
# input events generated by a 'Pro Micro' microcontroller.
|
|
#
|
|
# Pro Micro setup instructions
|
|
# ----------------------------
|
|
#
|
|
# Install prerequisites (example for Xubuntu 16.04):
|
|
#
|
|
# $ sudo apt-get install gcc-avr avr-libc avrdude
|
|
#
|
|
# Checkout and build the microcontroller software:
|
|
#
|
|
# $ git clone https://github.com/cproc/lufa.git
|
|
# $ cd lufa
|
|
# $ git checkout genode_usb_tests
|
|
# $ cd Demos/Device/ClassDriver/KeyboardMouseGenode
|
|
# $ make
|
|
#
|
|
# Connect the 'RST' pin with the 'GND' pin to hold the Pro Micro in the reset
|
|
# state.
|
|
#
|
|
# Connect the Pro Micro to the host PC
|
|
#
|
|
# Check the device file name with 'dmesg'. If it is not 'ttyACM0', change
|
|
# 'AVRDUDE_PORT' in 'makefile' accordingly.
|
|
#
|
|
# Release the RST/GND pin connection and within the next 8 seconds run:
|
|
#
|
|
# $ make avrdude
|
|
#
|
|
# Disconnect the Pro Micro or put it into reset state again to avoid unexpected
|
|
# input events on the host PC.
|
|
#
|
|
|
|
if {[have_board linux]} {
|
|
puts "Run script does not support Linux."
|
|
exit 0
|
|
}
|
|
|
|
if {[get_cmd_switch --autopilot] && [have_include "power_on/qemu"]} {
|
|
puts "Run script does not support autopilot mode on Qemu"
|
|
exit 0
|
|
}
|
|
|
|
if { [get_cmd_switch --autopilot] &&
|
|
![have_board rpi] &&
|
|
![have_spec x86] &&
|
|
![have_board imx6q_sabrelite]} {
|
|
puts "Run script does not support autopilot mode on this platform"
|
|
exit 0
|
|
}
|
|
|
|
proc platform_drv_config_non_x86 {} {
|
|
if {[have_board imx6q_sabrelite]} {
|
|
return {
|
|
<device name="mxs_phy" type="fsl,imx6q-usbphy">
|
|
<io_mem address="0x020ca000" size="0xfff"/>
|
|
<irq number="77"/>
|
|
<property name="fsl,anatop" value="0xdeaddead"/>
|
|
</device>
|
|
<device name="usbmisc_imx" type="fsl,imx6q-usbmisc">
|
|
<io_mem address="0x02184800" size="0x1ff"/>
|
|
</device>
|
|
<device name="imx_usb" type="fsl,imx6q-usb">
|
|
<io_mem address="0x02184200" size="0x1ff"/>
|
|
<irq number="72"/>
|
|
<property name="fsl,usbmisc" value="usbmisc_imx"/>
|
|
<property name="dr_mode" value="host"/>
|
|
</device>
|
|
<policy label="usb_drv -> " info="yes">
|
|
<device name="mxs_phy"/>
|
|
<device name="usbmisc_imx"/>
|
|
<device name="imx_usb"/>
|
|
</policy>
|
|
}
|
|
}
|
|
if {[have_board rpi]} {
|
|
return {
|
|
<device name="dwc_otg" type="brcm,bcm2835-usb">
|
|
<io_mem address="0x20980000" size="0x10000"/>
|
|
<irq number="9"/>
|
|
<power-domain name="usb"/>
|
|
</device>
|
|
<policy label="usb_drv -> " info="yes"> <device name="dwc_otg"/> </policy>
|
|
}
|
|
}
|
|
return ""
|
|
}
|
|
|
|
proc platform_drv_binary_non_x86 {} {
|
|
if {[have_board imx6q_sabrelite]} { return platform_drv }
|
|
if {[have_board rpi]} { return rpi_new_platform_drv }
|
|
return no_platform_drv_available
|
|
}
|
|
|
|
#
|
|
# Build
|
|
#
|
|
|
|
set build_components {
|
|
core init timer
|
|
drivers/usb_host
|
|
drivers/usb_hid
|
|
server/event_dump
|
|
server/dynamic_rom
|
|
server/report_rom
|
|
}
|
|
|
|
source ${genode_dir}/repos/base/run/platform_drv.inc
|
|
if { [have_spec x86] } { append_platform_drv_build_components
|
|
} else { append build_components { drivers/platform }
|
|
}
|
|
build $build_components
|
|
|
|
create_boot_directory
|
|
|
|
#
|
|
# Generate config
|
|
#
|
|
|
|
append config {
|
|
<config>
|
|
<parent-provides>
|
|
<service name="ROM"/>
|
|
<service name="IRQ"/>
|
|
<service name="IO_MEM"/>
|
|
<service name="IO_PORT"/>
|
|
<service name="PD"/>
|
|
<service name="RM"/>
|
|
<service name="CPU"/>
|
|
<service name="LOG"/>
|
|
</parent-provides>
|
|
<default-route>
|
|
<any-service> <parent/> <any-child/> </any-service>
|
|
</default-route>
|
|
<default caps="100"/>
|
|
}
|
|
|
|
if { [have_spec x86] } { append_platform_drv_config
|
|
} else {
|
|
append config "<start name=\"[platform_drv_binary_non_x86]\">"
|
|
append config {
|
|
<resource name="RAM" quantum="1M"/>
|
|
<provides><service name="Platform"/></provides>
|
|
<config>
|
|
}
|
|
append config "[platform_drv_config_non_x86]"
|
|
append config {
|
|
</config>
|
|
<route>
|
|
<service name="Timer"> <child name="timer"/> </service>
|
|
<any-service> <parent/> </any-service>
|
|
</route>
|
|
</start>
|
|
}
|
|
}
|
|
|
|
append config {
|
|
<start name="timer">
|
|
<resource name="RAM" quantum="1M"/>
|
|
<provides><service name="Timer"/></provides>
|
|
</start>
|
|
|
|
<start name="report_rom">
|
|
<resource name="RAM" quantum="1M"/>
|
|
<provides> <service name="Report"/> <service name="ROM"/> </provides>
|
|
<config verbose="no">
|
|
<default-policy report="usb_drv -> devices"/>
|
|
</config>
|
|
</start>
|
|
|
|
<start name="usb_drv" caps="150">
|
|
<binary name="} [usb_host_drv_binary] {"/>
|
|
<resource name="RAM" quantum="12M"/>
|
|
<provides> <service name="Usb"/> </provides>
|
|
<config bios_handoff="yes">
|
|
<report devices="yes"/>
|
|
<policy label_prefix="usb_hid_drv" class="0x3"/>
|
|
</config>
|
|
<route>
|
|
<service name="Report"> <child name="report_rom"/> </service>
|
|
<any-service> <parent/> <any-child/> </any-service>
|
|
</route>
|
|
</start>
|
|
|
|
<start name="usb_hid_drv" caps="140">
|
|
<resource name="RAM" quantum="11M"/>
|
|
<config use_report="yes" capslock_led="rom" numlock_led="rom" scrlock_led="rom"/>
|
|
<route>
|
|
<service name="ROM" label="capslock"> <child name="dynamic_rom"/> </service>
|
|
<service name="ROM" label="numlock"> <child name="dynamic_rom"/> </service>
|
|
<service name="ROM" label="scrlock"> <child name="dynamic_rom"/> </service>
|
|
<service name="ROM" label="report"> <child name="report_rom"/> </service>
|
|
<service name="Event"> <child name="event_dump"/> </service>
|
|
<any-service> <parent/> <any-child/> </any-service>
|
|
</route>
|
|
</start>
|
|
|
|
<start name="dynamic_rom">
|
|
<resource name="RAM" quantum="4M"/>
|
|
<provides> <service name="ROM"/> </provides>
|
|
<config verbose="no">
|
|
<rom name="capslock">
|
|
<inline> <capslock enabled="no"/> </inline>
|
|
<sleep milliseconds="250" />
|
|
<inline> <capslock enabled="yes"/> </inline>
|
|
<sleep milliseconds="250" />
|
|
</rom>
|
|
<rom name="numlock">
|
|
<inline> <numlock enabled="no"/> </inline>
|
|
<sleep milliseconds="500" />
|
|
<inline> <numlock enabled="yes"/> </inline>
|
|
<sleep milliseconds="500" />
|
|
</rom>
|
|
<rom name="scrlock">
|
|
<inline> <scrlock enabled="no"/> </inline>
|
|
<sleep milliseconds="1000" />
|
|
<inline> <scrlock enabled="yes"/> </inline>
|
|
<sleep milliseconds="1000" />
|
|
</rom>
|
|
</config>
|
|
<route>
|
|
<service name="ROM"> <parent/> </service>
|
|
<service name="CPU"> <parent/> </service>
|
|
<service name="PD"> <parent/> </service>
|
|
<service name="LOG"> <parent/> </service>
|
|
<service name="Timer"> <child name="timer"/> </service>
|
|
</route>
|
|
</start>
|
|
|
|
<start name="event_dump">
|
|
<resource name="RAM" quantum="1M"/>
|
|
<provides> <service name="Event"/> </provides>
|
|
<config/>
|
|
</start>
|
|
</config>}
|
|
|
|
install_config $config
|
|
|
|
#
|
|
# Boot modules
|
|
#
|
|
|
|
# generic modules
|
|
set boot_modules {
|
|
core ld.lib.so init timer usb_hid_drv event_dump dynamic_rom report_rom
|
|
}
|
|
|
|
append boot_modules " [usb_host_drv_binary] "
|
|
|
|
if {[have_spec x86]} { append_platform_drv_boot_modules
|
|
} else { append boot_modules " [platform_drv_binary_non_x86] " }
|
|
|
|
build_boot_image $boot_modules
|
|
|
|
append qemu_args " -usb -usbdevice mouse -usbdevice keyboard"
|
|
append qemu_args " -device usb-ehci,id=ehci"
|
|
append xen_args { usbdevice=\["mouse","keyboard"\] }
|
|
|
|
if { [have_include "power_on/qemu"] || ![get_cmd_switch --autopilot] } { run_genode_until forever }
|
|
|
|
# autopilot test
|
|
|
|
run_genode_until {\[init -\> event_dump\] Input event #0\t} 60
|
|
|
|
# remove everything before the first interesting line
|
|
regexp {(\[init -\> event_dump\] Input event #0\t.*)} $output all output
|
|
|
|
run_genode_until {\[init -\> event_dump\] Input event #11.*\n} 40 [output_spawn_id]
|
|
|
|
# pay only attention to the output of init and its children
|
|
grep_output {^\[init }
|
|
|
|
unify_output { number [0-9]+} ""
|
|
unify_output {(?n)on usb-usbbus.*$} ""
|
|
unify_output {(?n)using .*$} ""
|
|
unify_output {(?n)^.*__wait_event.*$} ""
|
|
unify_output {(?n)^.*Failed to submit URB.*$} ""
|
|
unify_output {(?n)^.*dev_warn.*$} ""
|
|
filter_out_color_escape_sequences
|
|
trim_lines
|
|
|
|
compare_output_to {
|
|
[init -> event_dump] Input event #0 PRESS KEY_X 65534 key count: 1
|
|
[init -> event_dump] Input event #1 RELEASE KEY_X key count: 0
|
|
[init -> event_dump] Input event #2 PRESS BTN_LEFT 65534 key count: 1
|
|
[init -> event_dump] Input event #3 REL_MOTION -1+0 key count: 1
|
|
[init -> event_dump] Input event #4 REL_MOTION +0+1 key count: 1
|
|
[init -> event_dump] Input event #5 RELEASE BTN_LEFT key count: 0
|
|
[init -> usb_drv] dev_info: USB disconnect, device
|
|
[init -> usb_drv] dev_info: new full-speed USB device
|
|
[init -> usb_hid_drv] dev_info: input: USB HID v1.11 Keyboard [HID 03eb:204d]
|
|
[init -> usb_hid_drv] dev_info: input: USB HID v1.11 Mouse [HID 03eb:204d]
|
|
[init -> event_dump] Input event #6 PRESS KEY_X 65534 key count: 1
|
|
[init -> event_dump] Input event #7 RELEASE KEY_X key count: 0
|
|
[init -> event_dump] Input event #8 PRESS BTN_LEFT 65534 key count: 1
|
|
[init -> event_dump] Input event #9 REL_MOTION -1+0 key count: 1
|
|
[init -> event_dump] Input event #10 REL_MOTION +0+1 key count: 1
|
|
[init -> event_dump] Input event #11 RELEASE BTN_LEFT key count: 0
|
|
}
|