Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
The 'vfs_block' component will give access to a VFS file through a
Block session. For more detailed information please look at its
README.
(On a technical note, the server currently only allows for one
active session and has only one pending back end request but can
easily be extended in the future.)
Fixes#3781.
The blit API archive missed the CPU-architecture-specific variants of
the blit library such that all depot binaries worked with the generic
(slow) fallback implementation. This patch adds the missing pieces to
the blit API archive.
Make the framebuffer driver for pl11x chipsets,
the ps2 input driver for pl050, and the lan9116 NIC driver independent from
the pbxa9 board by using the newly introduced common ARM platform driver API.
Ref #3299
* Remove input driver specific to i.MX53 tablet board from QSB driver pkg
* Move GPIO settings for QSB LVDS backlight out of framebuffer driver into
GPIO driver config
* Move PWM driver functionality out of framebuffer driver
* Make framebuffer driver configureable, and less dependent on
platform driver i.MX53 specifics
The former ldso-startup static library (now called ldso_so_support) is
used to spice each shared object/library with local support code for the
dynamic linker (execution of static constructors and ARM-EABI).
Therefore, the library must be statically linked to each dynamic
library.
As a result recipes for dynamic libraries must always depend on the "so"
API, which makes ldso_so_support.mk and so_support.c available
independent of "base". Additionally, ldso_so_support is also provided in
the libc API to cut the dependency early for libc/posix libraries.
Issue #3720
This patch removes old 'Allocator_guard' utility and replaces its use
with the modern 'Constrained_ram_allocator'.
The adjustment of core in this respect has the side effect of a more
accurate capability accounting in core's CPU, TRACE, and RM services.
In particular, the dataspace capabilities needed for core-internal
allocations via the 'Sliced_heap' are accounted to the client now.
The same goes for nitpicker and nic_dump as other former users of the
allocator guard. Hence, the patch also touches code at the client and
server sides related to these services.
The only remaining user of the 'Allocator_guard' is the Intel GPU
driver. As the adaptation of this component would be too invasive
without testing, this patch leaves this component unchanged by keeping a
copy of the 'allocator_guard.h' locally at the component.
Fixes#3750
The sandbox library supports the forwarding of session requests from the
outside to one of the hosted children according to a policy. This patch
introduces the distinction between two cases, which previously triggered
the denial of the session request.
- There exists no matching policy for the requested session
- There exists a matching policy but the referred server child
does not exist (yet)
Whereas the proper response to the first case is the denial of the
request, the second case can occur in situation where a dynamic init is
used to implement a staged startup, for example via the deploy
mechanism. In such cases, a policy may exist as a static rule while the
server has not been started yet. This patch changes the behavior such
that such requests are stalled.
The patch is accompanied with test cases for exercising both situations.
Fixes#3733
This depot package is the runtime for rtc_drv and system_rtc server with
coordinated update of system and hardware RTC via reports. It replaces
drivers_rtc which was never freestanding drivers package and, therefore,
has to be accompanied with a running platform_drv etc.
Fixes#3680
This patch extracts the child-management functionality from the init
component into a new library called "sandbox". The library API is
located at 'os/include/os/sandbox.h'.
The sandbox API allows for the interaction of the component with the
sandboxed children by providing locally implemented services. This
mechanism is illustrated by the new test at os/src/test/sandbox.
Issue #3601
The rtc_drv on x86 can now by used to also set the RTC. If the config
attribute 'allow_setting_rtc' is set to 'yes' the driver will update
the RTC from the content of the 'set-rtc' ROM module. A valid ROM must
contain a top node with the following attributes: 'year', 'month',
'day', 'hour', 'minute' and 'second'.
* Only rudimentary checking of the provided values is done.
* '12H' mode is not supported.
Fixes#3438.
* Make target binaries independent of board SPECS
* Name binaries of one architecture unambigously
* Extend include path to match board specifics
* Adapt run-scripts to use the right binary
Ref #2190
Ref #3180
The disk image contains an extended partition table now that would
have been parsed incorrectly in the past. While there remove the unused
gpt BLOB (test-part_block_gpt has its own raw archive).
Issue #3223.
The former 'Genode::Timed_semaphore' mechanism is moved to the private
part of the two remaining users, namely dde_rump and the libc. Note
there are now two private copies of 'timed_semaphore.h'. This should be
regarded as an interim step until the use of this mechanism is removed
from both users.
This patch also cleans up the mechanism from legacy Genode API calls and
global side effects (alarm-thread singleton). The test/timed_semaphore
is now located at the libports repository as it now tests a mechanism of
the libc. The former timed_semaphore library is no more.
Fixes#3121
Since the timer and timeout handling is part of the base library (the
dynamic linker), it belongs to the base repository.
Besides moving the timer and its related infrastructure (alarm, timeout
libs, tests) to the base repository, this patch also moves the timer
from the 'drivers' subdirectory directly to 'src' and disamibuates the
timer's build locations for the various kernels. Otherwise the different
timer implementations could interfere with each other when using one
build directory with multiple kernels.
Note that this patch changes the include paths for the former os/timer,
os/alarm.h, os/duration.h, and os/timed_semaphore.h to base/.
Issue #3101
By adding an additional synchronization point in the form of a matched
log message, this patch makes the timing behavior of the "test changing
provided services" step more deterministic. Without it, the scheduling
of OKL4 and base-hw resulted in a merge of two config updates into one.
Issue #3079
Our overall nightly test time greatly decreases when the timeouts for
the single tests are not that over-pessimistic. Using the slowest
platforms as reference, this commit reduces the test timeouts.
Ref #3027
The PS/2 driver retries to get mouse-reset results for 700 ms, sleeping
after each attempt for 10 ms. So, the driver needs a Timer session now.
Fixes#2713
This patch removes the detection of statically linked executables from
the base framework. It thereby fixes the corner cases encountered with
Sculpt when obtaining the binaries of the runtime from the depot_rom
service that is hosted within the runtime.
Statically linked binaries and hybrid Linux/Genode (lx_hybrid) binaries
can still be started by relabeling the ROM-session route of "ld.lib.so"
to the binary name, pretending that the binary is the dynamic linker.
This can be achieved via init's label rewriting mechanism:
<route>
<service name="ROM" unscoped_label="ld.lib.so">
<parent label="test-platform"/> </service>
</route>
However, as this is quite cryptic and would need to be applied for all
lx_hybrid components, the patch adds a shortcut to init's configuration.
One can simply add the 'ld="no"' attribute to the <start> node of the
corresponding component:
<start name="test-platform" ld="no"/>
Fixes#2866
This component is contrasted with the fs_rom server that serves
independent dataspaces to each client. Using a cache was not possible
until the region map session supported the creation of read-only
attachments.
Test at run/read_only_rom.
Ref #1633Fix#2760
Introduce the uplink tag:
! <config>
! <uplink label="wifi" domain="uplink">
! <uplink label="wired" domain="wired_bridge">
! <uplink domain="wired_bridge">
! <config/>
For each uplink tag, the NIC router requests a NIC session with the
corresponding label or an empty label if there is no label attribute.
These NIC sessions get attached to the domain that is set in their
uplink tag as soon as the domain appears. This means their lifetime is
not bound to the domain. Uplink NIC sessions can be safely moved from
one domain to another without being closed by reconfiguring the
corresponding domain attribute.
Attention: This may render previously valid NIC router configurations
useless. A domain named "uplink" doesn't automatically request a NIC
session anymore. To fix these configurations, just add
! <uplink domain="uplink"/>
or
! <uplink label="[LABEL]" domain="uplink"/>
as direct subtag of the <config> tag.
Issue #2840
Clients may wish to act on missing files. In any case the fs_rom
needs to reopen a watch handle when a file is deleted, and this
sort of change to the internal state machine is propelled by
client RPC requests.
Fix#2839
The old MAC allocator had several drawbacks:
* the address base was a public static that could and must have been written
directly from outside the class
* the in-use-flag array was based on unsigned values consuming 4 bytes each
for only one bit of information
* it was a public header that we actually don't want to expose to all
components but only to the few networking components
* it used the not-so-safe bit notation for integer members of GCC
The new version fixes all these drawbacks.
Issue #2795
This driver component provides support for using consumer NVMe storage
devices, i.e. it omits name space managment and will always use the
first name space, on Genode. For now it defaults to a reasonable low
configuration:
- 1 I/O queue (completion/submission tuple)
- 128 entries in the I/O queue
- 4096 as the only I/O transaction memory page size
Fixes#2747.
This patch introduces the subnodes <provides>, <requires>, and
<content> to the <runtime> node. All <rom> sessions that are
expected from the depot appear within the <content> node, which
sets them nicely apart from <rom> sessions that may be required
as runtime arguments.
Note that the <requires> and <provides> nodes do not appear in the
patch because the existing depot_deploy tool does not interpret this
information (the pkg/test-fs_report runtime does not provide any
service, and the timer session is provided as a common route).
By specifying the 'config' of a '<runtime>' as an attribute, we can
distinguish the case where the config is obtained from a ROM session
from the case where the config is specified inline as a '<config>' node.
The NIC router can now be configured to periodically send reports.
Configuration example (shows default values):
<config>
<report interval_sec="5" bytes="yes" config="yes">
</config>
If the 'report' tag is not available, no reports are send.
The attributes of the 'report' tag:
'bytes' : Boolean : Whether to report sent bytes and received bytes per
domain
'config' : Boolean : Whether to report ipv4 interface and gateway per
domain
'interval_sec' : 1..3600 : Interval of sending reports in seconds
Issue #2614
This commit replaces the old xray_trigger component by a new component
called global_keys_handler. For details, please refer to the issue text
and the accompanied README file.
Fixes#2554
