Only parse output of the test programs one-by-one and ignore log
messages from other components not starting with '[init -> test$number]'.
Fixes sporadic failures on KERNEL=sel4 due to the following warning from
core.
Warning: flush page table entries - mapping cache full - PD: init -> test1
Always instantiating a network device with id `net0`, removes the need to call
append_qemu_nic_args in run scripts unless we want to add forwarding
rules.
genodelabs/genode#4311
* Switch mesa support from DRI to gallium
Supported drivers are
- softpipe (Sebstian Sumpf)
- iris for Intel GPUs (Alexander Boetcher)
- etnaviv for Vivante GPUs (Josef Söntgen)
* Mesa's generated files are placed into 'contrib/mesa-<hash>/generated'
and are cloned per default from a separate Git repo in order to avoid
hash updates upon package build. In case you need to generate files
yourself use
! prepare_port mesa GENERATE_FILES=1
issue #4254
WARNING: BREAKS CONFIG COMPATIBILITY!
This commit changes the configuration interface of the NIC router in a way that
may break systems that use the component without proper adjustment!
How to adjust:
At each occurrence of the 'dns_server_from' attribute in a NIC router
configuration replace the attribute name with 'dns_config_from'. The attribute
value remains unaltered.
DETAILED DESCRIPTION
The new attribute name 'dns_config_from' reflects that also other aspects of
the DNS configuration of the denominated domain are used by the DHCP server
that holds the attribute. This commit is a preparation for forwarding also the
domain name (DHCP option 15) with the mechanism behind the attribute.
Ref #4246
Via a new configuration attribute, the user can decide whether the router
should answer dropped fragmented IPv4 with an ICMP "destination unreachable"
packet and, if so, which value the ICMP code field of this packet should have.
The default is that the router doesn't send such responses (silently dropping
fragmented IPv4). The behavior is tested by the 'nic_router_ipv4_fragm' test.
Fixes#4236
If the new attribute 'dropped_fragm_ipv4' of the <report> tag in the NIC router
config is set "yes", the router will report the number of packets that were
dropped per interface respectively domain because fragmented IPv4 is not
supported. The default is not to report the counter. The behavior is tested by
the 'nic_router_ipv4_fragm' test.
Ref #4236
The NIC router used to ignore the IPv4 header fields "More fragments" and
"Fragment offset" completely. Therefore higher-level protocols of fragmented
IPv4 were interpreted wrong because each fragment was considered a self-
standing packet, expecting, for instance UDP/TCP headers somewhere inside of
the UDP/TCP data field. Normally, such packets were dropped as soon as the
UDP/TCP checksum check failed because of the misinterpretation. However,
it was also possible for fragmented IPv4 to pass the router although normally
only partially.
IPv4 fragmentation support in the router would introduce some potential
security risks and is presumably not an easy endeavor. So, for now, we settled
on not supporting IPv4 fragmentation. With this commit, the router simply drops
all fragmented IPv4. This is reflected to the log for each fragment as "drop
packet (fragmented IPv4 not supported)" when 'verbose_packet_drop="yes"' is
configured.
The new test 'run/nic_router_ipv4_fragm' is an automated test for this
behavior. The test is added to the autopilot list.
Ref #4236
BREAKS CONFIG COMPATIBILITY:
This commit changes the configuration interface of the NIC router in a way that
may break systems that use the component without proper adjustment!
HOW TO ADJUST:
At each occurrence of the '<uplink ...>' tag in a NIC router configuration
replace the tag name 'uplink' with 'nic-client'. The rest of the tag stays the
same.
The term "uplink" for network interfaces in the router that have a NIC session
client as back end was introduced in a time when Uplink sessions didn't yet
exist. Now, they do and, although both an uplink and an Uplink session
normally describe a network session between router and network device driver,
they are based on two different service types (NIC and Uplink). This can easily
cause confusion when integrating the router (the <uplink> is not related to
Uplink sessions) or trying to understand its functioning (an 'Uplink' object
has nothing to do with the Uplink service).
Therefore, this commit introduces the more specific term "NIC client" for an
interface that is based on a NIC session requested by the router. This doesn't
imply any semantic changes at the NIC router. However, the commit also brings a
broader update of the router's README and removes the term "downlink" that was
used only in documentation to refer to interfaces backed by a NIC session
provided by the router. The term was only associated with this meaning because
it is the natural counterpart to an uplink. This isn't appropriate anymore as
the terms for interface types have moved to a more technical level.
The commit adjusts all scenarios in the basic Genode repositories properly.
Fixes#4238
After update of stdcxx, either hardware (CPU) random sources are taken
or, if not available/insufficient, /dev/urandom is used.
Issue #3967
Issue #4094
I created a test program which stresses the interplay between libc,
pthreads and vfs_pipe and may detect regressions.
The program starts a thread that spawns a bunch of workers, sends and
receives data to them through a pipe. When all data of a worker is
collected, the worker is finished (join()) and a new worker is started.
Both the number of bytes sent to the worker and the size of its
answer are random.
Issue #3967
Note, OpenSSL now comes as one combined depot archive *openssl* that
replaces the former *libssl* and *libcrypto* archives. The libraries are
still separate binaries for compatibility with legacy software.
Issue #3773
* Remove SPEC declarations from mk/spec
* Remove all board-specific REQUIRE declaratiions left
* Replace [have_spec <board>] run-script declarations with have_board where necessary
* Remove addition of BOARD variable to SPECS in toplevel Makefile
* Move board-specific directories in base-hw out of specs
Let the NIC router provide an Uplink service besides the Nic service that it
already provided. Requests for an Uplink session towards the NIC router are
assigned to Domains using the same <policy> configuration tags that are used in
order to assign Nic session requests. The MAC addresses of Uplink session
components are _NOT_ considered during the allocation of MAC addresses for NIC
session components at the same Domain. The task of avoiding MAC address clashes
between Uplink session components and Nic session components is therefore left
to the integrator. Apart from that, Uplink session components are treated by
the NIC router like any other interface.
Ref #3961
* The NIC router now considers, memorizes, and, if configured, reports
multiple DHCP option 6 entries from DHCP replies that it received as DHCP
client
* A DHCP server at the NIC router can now be configured statically with
multiple DNS server addresses to propagate
* The 'dns_server_from' attribute of the DHCP server of the NIC router now
supports the forwarding of multiple DNS server addresses
* The automated run/nic_router_dhcp test tests all the above mentioned new
functionality and reconfiguring it at runtime. The test was added to the
autopilot.
* All run scripts were adapted to fit the new NIC router configuration
interface
Fixes#3952
Right now the same code dealing with nic setup on qemu is duplicated
in many different run scripts. It makes it unnecesarily complex to
change the existing config or add support for new nic types. Lets move
all this common code to qemu.inc.
Ref #3825
Introduce the managing_system privilege for components like the
platform_driver to allow it to call system management functionality
that is reserved by kernel or special firmware, e.g., ARM Trusted Firmware.
The former RAM resource configuration attribute `constrain_phys`,
which enabled to constrain the region of physical RAM to be used,
gets replaced by the new, broader managing_system configuration
attribute of a `start` node. It gets enforced by the sandbox library.
Ref #3816
This patch prevents nitpicker from requesting a framebuffer and input
session by default because the regular use of nitpicker relies on the
capture-session and event-session interfaces by now.
For supporting the nested use of nitpicker via the gui_fb component, it
is still possible to enable the traditional behavior by explicitely
setting the 'request_input' and 'request_framebuffer' config attributes
to "yes".
Issue #3812
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
Make the framebuffer driver for pl11x chipsets,
the ps2 input driver for pl050, and the lan9116 NIC driver independent from
the pbxa9 board by using the newly introduced common ARM platform driver API.
Ref #3299
This patch removes old 'Allocator_guard' utility and replaces its use
with the modern 'Constrained_ram_allocator'.
The adjustment of core in this respect has the side effect of a more
accurate capability accounting in core's CPU, TRACE, and RM services.
In particular, the dataspace capabilities needed for core-internal
allocations via the 'Sliced_heap' are accounted to the client now.
The same goes for nitpicker and nic_dump as other former users of the
allocator guard. Hence, the patch also touches code at the client and
server sides related to these services.
The only remaining user of the 'Allocator_guard' is the Intel GPU
driver. As the adaptation of this component would be too invasive
without testing, this patch leaves this component unchanged by keeping a
copy of the 'allocator_guard.h' locally at the component.
Fixes#3750
This depot package is the runtime for rtc_drv and system_rtc server with
coordinated update of system and hardware RTC via reports. It replaces
drivers_rtc which was never freestanding drivers package and, therefore,
has to be accompanied with a running platform_drv etc.
Fixes#3680
It runs pretty well on Raspberry Pi, for example.
Leaving this scenario limited to x86 for autopilot runs only.
Signed-off-by: Oleg Girko <ol@infoserver.lv>
Fixes#3536
Prevents integration failures like follows if the libraries were not
built already in the build directory.
Missing boot modules: libm.lib.so posix.lib.so
Makefile:323: recipe for target 'run/lwip_lx' failed
This adds two new boolean attributes to the <report> tag of the NIC router
configuration 'link_state' and 'link_state_triggers'. The former decides
whether to report the link state of each NIC interface (downlink, uplinks) at
the NIC router. The other decides whether to trigger reporting each time the
link state of an interface changes.
Fixes#3527
The run script used to be the only user of the fatfs_fs server, which
we're going to remove. This patch removes the components for accessing a
real storage device and file system from the run script. The new version
just uses ram_fs.
Issue #3512
This patch complements the commit "libc: execve" with the ability to
execute files stored at arbitrary sub directories of the file system.
Issue #3481
Issue #3500
- Eliminate call of global libc_config()
- Remove dynamic memory allocation, const cast
- Prepare for moving the state from compilation unit to header
- Fix run/libc_getpwent.run
Issue #3497
This patch implements 'execve' in Genode's libc.
The mechanism relies on the dynamic linker's ability to replace the
loaded binary while keeping crucial libraries - in particular the libc -
intact. The state outside the libc is wiped. For this reason, all libc
internal state needed beyond the 'execve' call must be allocated on a
heap separate from the application-owned malloc heap. E.g.,
libc-internal file-descriptor objects must not be allocated or refer to
any memory object allocated from the malloc heap.
Issue #3481
This patch extends the fork test with explicit checks for the cloned
content of the heap and RW segment as well as the seek position of an
open file descriptor. It adds the new libports/run/fork.run script
that exercises the fork mechanism implemented by the libc. It is based
on noux_fork.run, which tests the mechansim provided by noux. The
test program has been moved from ports to libports.
Issue #3478
