A 'QThread' can be reused when its execution is finished by calling
'QThread::start()' again. Before this commit, this created a new Genode
thread, but did not destroy a previously finished Genode thread first.
Fixes#2928
This patch reintroduces the LwIP stack to libc as a VFS plugin
implementing the socket_fs interface. Rather than use LwIP's socket
emulation layer this plugin interfaces directly to LwIP raw API and is
single threaded.
The internal TCP parameters of the stack are untuned.
Fix#2050Fix#2335
Calling 'handle_io_response()' in a regular VFS function (in contrast to a
post-signal hook) can cause problems if the caller of the VFS function holds
a lock which prevents the io response handler from returning.
With this commit, the user of the VFS becomes responsible for unblocking
threads which might be blocking after a failed 'queue_read()', 'queue_sync()'
or 'write()' call.
Fixes#2896
This patch removes the detection of statically linked executables from
the base framework. It thereby fixes the corner cases encountered with
Sculpt when obtaining the binaries of the runtime from the depot_rom
service that is hosted within the runtime.
Statically linked binaries and hybrid Linux/Genode (lx_hybrid) binaries
can still be started by relabeling the ROM-session route of "ld.lib.so"
to the binary name, pretending that the binary is the dynamic linker.
This can be achieved via init's label rewriting mechanism:
<route>
<service name="ROM" unscoped_label="ld.lib.so">
<parent label="test-platform"/> </service>
</route>
However, as this is quite cryptic and would need to be applied for all
lx_hybrid components, the patch adds a shortcut to init's configuration.
One can simply add the 'ld="no"' attribute to the <start> node of the
corresponding component:
<start name="test-platform" ld="no"/>
Fixes#2866
The verbosity mode of the NIC bridge can be toggled with the verbose attribute
(default value shown):
! <config verbose="no" />
If enabled, the NIC bridge logs sent and received packets as well as the
lifetime of interfaces connected to the bridge.
Issue #2899
Do not generate invalid configurations for the uplink domain anymore. If
some tests are disabled and therefore their routing rules at the uplink
domain would be invalid, spare out these routing rules.
Issue #2899
Also remove 'requires_installation_of', while also checking sbin
directories in 'have_installed'. The run scripts have been adjusted
accordingly.
Fixes#2853
- initialize the stack size attribute with `Libc::Component::stack_size()`
as default value
- remove the possibly uninitialized `pthread` member from the attribute
structure and obtain current attribute values in the
`pthread_attr_get_np()` function, where the `pthread` object reference
is given as argument
- let each thread obtain its stack address and actual stack size at thread
start to have the information available for other threads
Fixes#2865
The libc will now use the file given by the 'nameserver_file' attribute
to get the DNS nameserver address instead of reading '/etc/resolv.conf'.
It defaults to '/socket/nameserver' which is the common location when
using the lxip VFS plugin. As a constraint the libc will read the first
line and expects the nameserver address without any keywords in front of
it.
Fixes#2861.
Merge the configuration from raw/pdf_view into the pkg/pdf_view runtime
file. Request a File_system session and load files from there, rather
than by ROM.
Ref #2859
The component is no longer loads from '/test.pdf', the first PDF file
found in the root directory of the file-system is loaded automatically.
The behavior cannot be overridden by configuration.
Feed MuPDF with characters from input events to MuPDF rather than
translate raw key codes to ASCII. This enables almost all MuPDF key
bindings without the need to maintain a lookup table. Mouse navigation
has been enabled as well. To print the key-bindings to log, press '?'.
Fix#2859
Introduce the uplink tag:
! <config>
! <uplink label="wifi" domain="uplink">
! <uplink label="wired" domain="wired_bridge">
! <uplink domain="wired_bridge">
! <config/>
For each uplink tag, the NIC router requests a NIC session with the
corresponding label or an empty label if there is no label attribute.
These NIC sessions get attached to the domain that is set in their
uplink tag as soon as the domain appears. This means their lifetime is
not bound to the domain. Uplink NIC sessions can be safely moved from
one domain to another without being closed by reconfiguring the
corresponding domain attribute.
Attention: This may render previously valid NIC router configurations
useless. A domain named "uplink" doesn't automatically request a NIC
session anymore. To fix these configurations, just add
! <uplink domain="uplink"/>
or
! <uplink label="[LABEL]" domain="uplink"/>
as direct subtag of the <config> tag.
Issue #2840
- support saving of files with no file name extension
- make the the "All Files (*)" file selection filter the default to see
configuration files immediately
Fixes#2844
Properly initialize and reset the _owner member, otherwise
correlating the unlock operation with the respective read/write
lock does not work.
Move locking the _nbr_mutex in the unlock operation after the
owner check. Otherwise, a reader holding that mutex and waiting
for the write lock would deadlock a writer trying to unlock the
_global_mutex.
Ref. Componolit/componolit#86
Ref. #2656Fixes#2832
If ACPI IRQs are received but no changes to the watched state for a specified
count can be observed, than generate nonetheless a Genode report.
Issue #2816
Rename LwIP library in preparation for removal of LwIP libc plugin. The
current LwIP library will be replaced with a new version stripped of its
synchronous socket support. The next version will be incompatible with
the current, so removing 'lwip.lib.so' completely for a period makes it
easy to identify legacy users.
Fix#2797
Generic code that operates over both UDP and TCP sockets might use
'sendto', but in the case of TCP the destination address ought to be
safely discarded. This seems to be the case for certain DNS software
that operates over both UDP and TCP.
Fix#2807
issue #2791
pthread_attr is not associated with any thread, the statistics must be
gathered at runtime, while 'pthread_attr_get_np' may retrieve attributes
by from any thread. Addtionally, the attributes given to
'pthread_create' will most likely be deleted after the creation call.
The sole existence of shared-object dependencies lead to fatal
static-constructor errors before. Now, ldso checks if the ctors section
of objects in the init list are non-empty before whining.
Issue #2759
Socket_fs sockets are now created each time a 'new_socket' control file
is opened, not each time a 'new_socket' file is read. When a handle on a
'new_socket' file is closed the socket and its socket files are
destroyed. The accept control file on a listening socket reads "1" or
reads nothing to indicate a client connection is queued. Client sockets
are accepted by opening an 'accept_socket' file in the listen socket
directory. This file behaves like the aforementioned 'new_socket' file.
Ref #2707
The nic_bridge test is not suitable to be executed on hardware so it should,
in case, print an appropriate message and return without doing anything else.
Issue #2788
This commit changes the 'Input::Event' type to be more safe and to
deliver symbolic character information along with press events.
Issue #2761Fixes#2786
The Ada runtime can now be set with the ADA_RTS variable. The ada
library builds a (currently) minimal runtime from the gcc sources that
come with Genode (to stay consistent with the used compiler) and sets
the runtime path accordingly. It is build as a shared library ada.lib.so
which needs to be added to the build files.
I split the existing Ada test into program and library, and moved it
to libports as it depends on the runtime library residing in this
repository too.
Fixes#2748
Reduce the size and forward compatibility of VFS file-system
constructors by passing an object holding accessors for 'Genode::Env',
'Genode::Allocator', response handlers, and the root file-system.
Fix#2742
In other words: Loosen the former property that suspend can only be
called from the first user stack and, thus, enable additional user
stacks, e.g., in coroutine libraries.
Fix#2737
The 'default' attribute is useful to change the default value for those
protocol attributes that are not explicitely set in the configuration of
the component.
Issue #2738
Each supported protocol now has an attribute with the name of the protocol in
the config tag. Each of these attributes accepts one of four possible values:
* no - do not print out this protocol
* name - print only the protocol name
* default - print a short summary of the most important header values
* all - print all available header values
Example:
! <config eth="name"
! arp="all"
! ipv4="default"
! dhcp="no"
! icmp="all"
! udp="no"
! tcp="default"
! ... />
Corresponding output example:
! ETH IPV4 10.0.2.212 > 10.0.2.55 time 7158 ms (Δ 11 ms)
! ETH IPV4 10.0.2.55 > 10.0.2.201 TCP 80 > 49154 flags ' time 6976 ms (Δ 5 ms)
! ETH ARP hw 1 prot 2048 hwsz 6 protsz 4 op 1 srcmac 02:02:02:02:02:01 srcip 10.0.2.212 dstmac 00:00:00:00:00:00 dstip 10.0.2.55 time 7074 ms (Δ 98 ms)
Issue #2738
This patch enables the use of the VFS from VFS plugins by passing a
reference of the root directory to the constructors of file-system
instances. Since it changes the signature of 'Vfs::Dir_file_system',
any code that uses the VFS directly requires an adaptation.
Fixes#2701
A very basic test of the re-configurability. It overwrites the configuration
once without making any changes, once with removing all domains except
uplink, and a third time recovering to the initial configuration to see if
the clients keep going as soon as their domains are back.
Fixes#2670
This separates the decision wether to log the received and sent packets
from the 'verbose' attribute. This information is now only logged if
'verbose_packets' is switched on. If 'verbose' is switched on, only
routing decisions and optional hints are printed.
Ref #2670
Link the EGL library with Mesa. SDL's `GL_GetProcAddress` now calls
`eglGetProcAddress` rather than lookup procedures directly in the Mesa
library.
Components may still wish to list 'mesa_api' in LIBS to access OpenGL
headers.
Fix#2711
This prevents diagnostic messages like
Error: partial write detected 0 vs 31
for writes into already released socket directories due to a still-open
handle to the socket data file.
Remove the dependency on the deprecated LwIP libary.
Remove the progress logging callback. Should a progress indicator be
desired, a progress report would be more appropriate.
Fix#2684
This patch removes the notion of partial writes from the file-system
servers. Since write operations are asynchronously submitted, they are
expected to succeed completely, except for I/O errors. I/O errors are
propagated with the write acknowledgement but those are usually handled
out of band at the client side. Partial writes must never occur because
they would go undetected by clients, which usually don't wait for the
completion of each single write operation.
Until now, most file-system servers returned the number of written bytes
in the acknowledgement packet. If a server managed to write a part of
the request only, it issued the acknowledgement immediately where it
should have cared about writing the remaining part first.
The patch detects such misbehaving server-side code. If partial writes
unexpectedly occur, it prints a message and leaves the corresponding
request unacknowdleged.
Issue #2672
Instead of having a lot of platform specific quirks in the run test,
and to also test it on platforms currently missing a NIC driver,
this commit removes hardware drivers from the nic_router and
nic_bridge run scripts, and uses the nic_loopback server instead.
The new 'verify' component facilitates the code of GnuPG to verify
detached OpenPGP signatures against public keys.
Since GnuPG depends on libgcrypt and libgpg-error, the patch adds these
libraries to the libports repository.
Fixes#2640
The TCP window scaling is implemented for servers (like netperf's
netserver) only. The client implementation just uses the lower 16 bits
of the TCP_WND configuration value, which we therefore maximize to ~64K.
This is a follow-up commit to "Increase default warning level", which
overrides Genode's new default warning level for targets contained in
higher-level repositories. By explicitly whitelisting all those targets,
we can selectively adjust them to the new strictness over time - by
looking out for 'CC_CXX_WARN_STRICT' in the target description files.
Issue #465
The patch adjust the code of the base, base-<kernel>, and os repository.
To adapt existing components to fix violations of the best practices
suggested by "Effective C++" as reported by the -Weffc++ compiler
argument. The changes follow the patterns outlined below:
* A class with virtual functions can no longer publicly inherit base
classed without a vtable. The inherited object may either be moved
to a member variable, or inherited privately. The latter would be
used for classes that inherit 'List::Element' or 'Avl_node'. In order
to enable the 'List' and 'Avl_tree' to access the meta data, the
'List' must become a friend.
* Instead of adding a virtual destructor to abstract base classes,
we inherit the new 'Interface' class, which contains a virtual
destructor. This way, single-line abstract base classes can stay
as compact as they are now. The 'Interface' utility resides in
base/include/util/interface.h.
* With the new warnings enabled, all member variables must be explicitly
initialized. Basic types may be initialized with '='. All other types
are initialized with braces '{ ... }' or as class initializers. If
basic types and non-basic types appear in a row, it is nice to only
use the brace syntax (also for basic types) and align the braces.
* If a class contains pointers as members, it must now also provide a
copy constructor and assignment operator. In the most cases, one
would make them private, effectively disallowing the objects to be
copied. Unfortunately, this warning cannot be fixed be inheriting
our existing 'Noncopyable' class (the compiler fails to detect that
the inheriting class cannot be copied and still gives the error).
For now, we have to manually add declarations for both the copy
constructor and assignment operator as private class members. Those
declarations should be prepended with a comment like this:
/*
* Noncopyable
*/
Thread(Thread const &);
Thread &operator = (Thread const &);
In the future, we should revisit these places and try to replace
the pointers with references. In the presence of at least one
reference member, the compiler would no longer implicitly generate
a copy constructor. So we could remove the manual declaration.
Issue #465
Stdin, stdout, and stderr are mapped to descriptors 0, 1, and 2
respectively. If these first three descriptors are not allocated before
the application becomes active then normal files and sockets can be
opened under these numbers, potentially causing unexpected application
behavior.
Fix#2628
This patch makes the creation of the libc's timer session depend on
whether or not the 'rtc' attribute of the <libc> configuration is
defined. If not configured, 'clock_gettime' returns 0.
Fixes#2625
The NIC router can now be configured to periodically send reports.
Configuration example (shows default values):
<config>
<report interval_sec="5" bytes="yes" config="yes">
</config>
If the 'report' tag is not available, no reports are send.
The attributes of the 'report' tag:
'bytes' : Boolean : Whether to report sent bytes and received bytes per
domain
'config' : Boolean : Whether to report ipv4 interface and gateway per
domain
'interval_sec' : 1..3600 : Interval of sending reports in seconds
Issue #2614
Avoid that the user has to define the number of HTTP/UDP clients manually.
This count is used by the run scripts to generate the expected log output.
Fix#2609
Previously, the function that returned the XML config for a network test
client/server in the scripts formed the component name of the peer solely
by combining the protocol name, "client" or "server", and a suffix that
is given as argument. However, to group multiple clients together in one
domain via their session label at the NIC router we want peers with the same
name prefix. Thus, the function now simply takes the whole name as argument.
Issue #2609
When this flag is set in the config tag, the NIC router will print a
short information to the log for each general state change of a domain.
This includes currently the IP-configuration state and the number of
connected NIC sessions. This a useful addition as the normal verbose
flag's purpose is a very deep insight into almost every activity in the
router, which is cool for debugging sophisticated problems but normally
floods the log and therefore discards this option for, e.g., desktop
systems. In such systems, the new verbosity is pretty discreet but
already gives a good hint on why packets may get dropped by the router
although the routing rules are correct.
Issue #2534
Replace former rtt_sec attribute of the <config> tag by more specific
(and still optional) attributes for timeouts used in the NIC router
(these are also the default values):
<config dhcp_discover_timeout_sec="10"
dhcp_request_timeout_sec="10"
dhcp_offer_timeout_sec="10"
udp_idle_timeout_sec="30"
tcp_idle_timeout_sec="600"
tcp_max_segm_lifetime_sec="30">
Details about the new attributes can be found in the README of the router.
Issue #2590
In case the video geometry (WxH) is larger than the current size of
the framebuffer, match its size and let libav do the scaling. This
enables the playback of 1080p movies on smaller screens.
Issue #2583.
The synchronization with the ACPI driver is not needed when starting
acpica at a later stage. It could already be disabled via the
'acpi_ready="yes"' config attribute. However, acpica still
unconditionally requests the so-called "Acpi" service, which is an
alias for the platform_drv's "Platform" service. This patch disables the
use of this alias when the 'acpi_ready' synchronization is disabled.
The debug version comes with an unwelcome libc dependency, which is
solely needed for the formatted output of error messages. Since the
distinction between the regular and the debug versions remained unused
in practice, this patch removes the debug version.
This makes '/' and the actual root of VFS distinguishable. A VFS root
may contain one ore more '/' entries for each file system. 'opendir' for
the VFS root opens all file systems via 'open_composite_dir', while
'opendir' for '/' only returns a VFS handle.
Fixes#2569
Currently, LxIP peers need a lot of RAM (the simple test-client/server for the
nic_router test need at least 28 MB per component). As the nic_router test
previously used 6 instances of such components and a lot of other components,
it had issues with insufficient RAM on some platforms. By using two new
LwIP-based UDP tests instead, we save more than 100 MB.
Ref #2543
