When unblocking a thread in Semaphore::up() while holding the fifo meta-data
lock, it might happen that the lock holder gets destroyed by the one it was
unblocking. This happened for instance in the pthread test in the past, where
thread destruction was synchronized via a semaphore. There is no need to hold
the lock during the unblock operation, so we should do it outside the critical
section.
Fix#1333
Previously we used a pretty slow external clock source for the timer. This
resulted in such a low TICS_PER_MS value that the granularity wasn't
sufficient to find a setup with a precision better than 1 second error per
minute. Now we use the so-called High Frequency Reference Clock as input
with TICS_PER_MS=33333 and the timer precision is significantly < 1 second per
minute.
Fixes#1805
On Linux the linker can now be loaded at arbitrary addresses, this became
necessary for newer kernel versions. The 'linux_arm' target is not supported.
Issue #1728
* enable i915 driver from Linux 3.14.5
* tested for generation 5 till 8 GPUs
The driver can be configured at run-time via the config ROM. Every
connector of the graphic card can be configured separately using the
following syntax
<config>
<connector name="LVDS-11" width="1280" height="800" enabled="true"/>
</config>
Also, when enabled within the intel framebuffer driver configuration like
the following
<config buffered="yes"/>
a simple ram dataspace is propagated to the client and the driver
itselfs copies from that buffer to the framebuffer triggered via refresh
calls. This option is useful to alleviate tearing effects.
The driver distributes all available connectors of the graphic card and
their supported resolutions via a report. It looks like follows
<connectors>
<connector name="LVDS-11" connected="1">
<mode width="1280" height="800" hz="60"/>
...
</connector>
...
</connectors>
The driver distributes the report only if this is stated within its
configuration, like the following
<config>
<report connectors="yes"/>
</config>
Fix#1764
'block_for_signal' and 'pending_signal' now set pending flag in signal context
in order to determine pending signal. The context list is also used by the
'Signal_receiver' during destruction.
Fixes#1738
Currently, when a signal arrives in the main thread, the signal dispatcher is
retrieved and called from the main thread, the dispatcher uses a proxy object
that in turn sends an RPC to the entry point. This becomes a problem when the
entry point destroys the dispatcher object, before the dispatch function has
been called by the main thread. Therefore, the main thread should simply send an
RPC to the entry point upon signal arrival and the dispatching should be handled
solely by the entry point.
Issue #1738
Holding the object pool's lock while trying to obtain an object's lock
can leave to dead-lock situations, when more than one thread tries to
access multiple objects at once (e.g.: when transfer_quota gets called
simultanously by the init and entrypoint thread in core). To circumvent
holding the object pool lock too long, but access object pointers safely
on the other hand, this commit updates the object pool implementation
to use weak pointers during the object retrieval.
Fix#1704
Destroying an object within the scope of a lambda/functor executed
in the object pool's apply function leads potentially to memory corruption.
Within the scope the corresponding object is locked and unlocked when
leaving the scope. Therefore, it is illegal to free the object's memory meanwhile.
This commit eliminates several places in core that destroyed wrongly in
the object pool's scope.
Fix#1713
* Move the Synced_interface from os -> base
* Align the naming of "synchronized" helpers to "Synced_*"
* Move Synced_range_allocator to core's private headers
* Remove the raw() and lock() members from Synced_allocator and
Synced_range_allocator, and re-use the Synced_interface for them
* Make core's Mapped_mem_allocator a friend class of Synced_range_allocator
to enable the needed "unsafe" access of its physical and virtual allocators
Fix#1697
The commit consumes the argument of a unsupported printf command.
Without the commit - a subsequent command uses the argument of the preceding
command, which may cause memory corruption or page faults for sequences using
string commands, e.g.
Genode::printf("%#x %s\n", 0x20, "Test");
'#' is not supported by Genode::printf. In this scenario a pagefault at
address 0x20 is caused.
Fixes#1701
Instead of holding SPEC-variable dependent files and directories inline
within the repository structure, move them into 'spec' subdirectories
at the corresponding levels, e.g.:
repos/base/include/spec
repos/base/mk/spec
repos/base/lib/mk/spec
repos/base/src/core/spec
...
Moreover, this commit removes the 'platform' directories. That term was
used in an overloaded sense. All SPEC-relative 'platform' directories are
now named 'spec'. Other files, like for instance those related to the
kernel/architecture specific startup library, where moved from 'platform'
directories to explicit, more meaningful places like e.g.: 'src/lib/startup'.
Fix#1673
Instead of returning pointers to locked objects via a lookup function,
the new object pool implementation restricts object access to
functors resp. lambda expressions that are applied to the objects
within the pool itself.
Fix#884Fix#1658
With the introducation of the Audio_in session interface it makes
sense to rename the current available audio drivers. At the moment
only the dde_bsd audio_drv supports Audio_out as well as Audio_in.
The Linux audio_drv only supports Audio_out (there is no demand for
Audio_in support currently) but is renamed nonetheless to make it
easiert to write generic run scripts.
Issue #1644.
For most platforms except of NOVA a distinction between pager entrypoint
and pager activation is not needed, and only exists due to historical
reasons. Moreover, the pager thread's execution path is almost identical
between most platforms excluding NOVA, HW, and Fisco.OC. Therefore,
this commit unifies the pager loop for the other platforms, and removes
the pager activation class.
Increase internal chunk size of heap only if an allocation succeeded
beforehand. Otherwise the chunk size increases with every unsuccessful
invocation and a upgrade of the used ram session will be insufficient and of
no use at all.
Fixes#1632
Moves the Bios Data Area header from base-hw to base. Modifies the
base-nova core console that it uses the header as replacement for
the previous BDA bit logic.
Ref #1625
Introduces a class Unmanaged_singleton_constructor that can be declared as
friend to be able to call unmanaged_singleton on classes with a private
constructor. Enables the appliance of the singleton pattern.
Ref #1625
This commit eliminates the mutual interlaced taking of destruction lock,
list lock and weak pointer locks that could lead to a dead-lock situation
when a lock pointer was tried to construct while a weak object is in
destruction progress.
Now, all weak pointers are invalidated and dequeued at the very
beginning of the weak object's destruction. Moreover, before a weak pointer
gets invalidated during destruction of a weak object, it gets dequeued, and
the list lock is freed again to avoid the former dead-lock.
Fix#1607
Up to now it was not possible to trace threads that use a different
Cpu_session rather than env()->cpu_session() (as done by VirtualBox).
This problem is now solved by setting the Cpu_session explicitly when
creating the event logger and attaching the trace control area when
creating the thread.
Fixes#1618.
Add a test where a locked pointer shall be taken during object destruction.
Moreover, extend the run-script so it runs on different platforms with
"real" timers.
We set 'ld -z max-page-size' to 4KiB to prevent the linker from aligning
the text segment to any built-in default (e.g., 4MiB on x86_64 or 64KiB
on ARM). Otherwise, the padding bytes are wasted at the beginning of the
final binary.
The recent change of the TRACE session interface triggered the
following warning:
/home/no/src/genode/repos/base/include/base/ipc.h:79:4: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
*reinterpret_cast<T *>(&_sndbuf[_write_offset]) = value;
^
In file included from /home/no/src/genode/repos/base/src/core/include/trace/session_component.h:19:0,
from /home/no/src/genode/repos/base/src/core/trace_session_component.cc:15:
/home/no/src/genode/repos/base/include/base/rpc_server.h:132:42: note: ‘ret’ was declared here
typename This_rpc_function::Ret_type ret;
The warning occurs for basic return types (like size_t), which are
indeed not initialized. The variable gets its value assigned by the
corresponding 'call_member' overload, to which the variable is passed as
reference. But the compiler apparently is not able to detect this assignment.
Declaring 'ret' with a C++11-style default initializer fixes the warning.
While importing trace sources as trace subjects into a TRACE session,
the session quota might become depleted. The TRACE session already keeps
track of the session quota via an allocator guard but the 'subjects' RPC
function missed to handle the out-of-memory condition. This patch
reflects the error condition as an 'Out_of_metadata' exception to the
TRACE client. It also contains an extension of the trace test to
exercise the corner case.
This patch enable clients of core's TRACE service to obtain the
execution times of trace subjects (i.e., threads). The execution time is
delivered as part of the 'Subject_info' structure.
Right now, the feature is available solely on NOVA. On all other base
platforms, the returned execution times are 0.
Issue #813
On ARM, the compiler generates calls to memcpy and memset. Most
dynamically linked programs use the libc, which provides these
functions. However, if a dynamically linked program does not use the
libc (e.g., noux/minimal or the new version of cli_monitor), those
symbols remain unresolved. By adding them to ldso's symbol.map, the
dynamic linker will resolve them with the functions of the cxx
library, which is part of the dynamic linker.
Issue #1561
For several basic sessions that core provides default ram quota values
exist in the form of enum values. They are used e.g. by init to deduce
session costs. Unfortunately they were not used when actually establishing
the session, which lead to inconsistencies.
Ref #1443
We implicitly know that the value range will not exceed access_t despite
the integer-based arithmetics, i.e., negation and shift operations.
Fixes#1524
Currently, libc_noux includes the 'base/src/base/env/platform_env.h' file
to be able to reinitialize the environment using the 'Platform_env'
interface. For base-linux, a special version of this file exists and the
inclusion of the generic version in libc_noux causes GCC 4.9 to make wrong
assumptions about the memory layout of the 'Env' object returned by
'Genode::env()'.
This commit moves the reinitialization functions to the 'Env' interface to
avoid the need to include the 'platform_env.h' file in libc_noux.
Fixes#1510
On seL4, we need to convert untyped memory to page frames before being
able to use it as normal memory. There already exists the hook function
'_export_ds' that is principally suitable for such tasks. It is
currently solely used on Linux where we have to create a file for each
dataspace. To make the hook useful also for seL4, we need to call
_export_ds prior _clear_ds. Otherwise, we would try to clear memory that
is still untyped.
This patch avoids the attempt to extend the cxx-local heap during the
startup phase of an application. Originally, the static part of the cxx
was merely 100 bytes, which did not suffice to run the minimalistic test
roottask on seL4.
If a null-terminated string exactly of length MAX (0 byte included) is
provided, it will be handled as invalid because of wrong string size length
checks.
Commit fixes this.
Discovered during #1486 development.
The thread library (thread.cc) in base-foc shared 95% of the code with
the generic implementation except myself(). Therefore, its
implementation is now separated from the other generic sources into
myself.cc, which allows base-foc to use a foc-specific primitive to
enable our base libraries in L4Linux.
Issue #1491
Physical CPU quota was previously given to a thread on construction only
by directly specifying a percentage of the quota of the according CPU
session. Now, a new thread is given a weighting that can be any value.
The physical counter-value of such a weighting depends on the weightings
of the other threads at the CPU session. Thus, the physical quota of all
threads of a CPU session must be updated when a weighting is added or
removed. This is each time the session creates or destroys a thread.
This commit also adapts the "cpu_quota" test in base-hw accordingly.
Ref #1464
