* Introduce CPU quota for driver subsytem (needed by sd_card_drv)
* Introduce CPU quota for runtime subsytem and nic_drv (needed by fec_nic_drv)
* Increase CAP quota for inspect terminal slightly
* Add sculpt packages for imx8q_evk
Fix#3958
The driver is faily simple and does not support fancy features like
TCP checksum offloading or vlan filtering, but it is fully capable of
running every Genode network based scenario I've tried. Its currently
known to work on virt_qemu arm platforms and x86_64.
Fix#3825
The VirtIO device configuration on Qemu is dynamic. The
order and presence of different command line switches affects
base address and interrupt assignment of each device. One could
probably hard-code the necessary switches and resulting XML ARM
platform driver configuration in each run script, but this seems
like troublesome and hard to maintain solution.
This patch explores an alternative approach to the problem.
It implements a ROM driver which probes the address space region
Qemu virt machines assign to VirtIO MMIO devices and exposes the
result as XML via a ROM session. This XML output can be fed directly
as config to the generic ARM platform driver.
Ref #3825
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This is an intermediate helper component for the transition of input
servers into event clients. It works analogously to the
input_event_bridge but it connects servers instead of clients.
In particular, it can act as glue between a traditional input driver
that provides an input service and the event filter that provides an
event service. Thanks to this component, each driver can be migrated to
the event-client interface individually.
Issue #3827
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
The 'vfs_block' component will give access to a VFS file through a
Block session. For more detailed information please look at its
README.
(On a technical note, the server currently only allows for one
active session and has only one pending back end request but can
easily be extended in the future.)
Fixes#3781.
Make the framebuffer driver for pl11x chipsets,
the ps2 input driver for pl050, and the lan9116 NIC driver independent from
the pbxa9 board by using the newly introduced common ARM platform driver API.
Ref #3299
* Remove input driver specific to i.MX53 tablet board from QSB driver pkg
* Move GPIO settings for QSB LVDS backlight out of framebuffer driver into
GPIO driver config
* Move PWM driver functionality out of framebuffer driver
* Make framebuffer driver configureable, and less dependent on
platform driver i.MX53 specifics
The former ldso-startup static library (now called ldso_so_support) is
used to spice each shared object/library with local support code for the
dynamic linker (execution of static constructors and ARM-EABI).
Therefore, the library must be statically linked to each dynamic
library.
As a result recipes for dynamic libraries must always depend on the "so"
API, which makes ldso_so_support.mk and so_support.c available
independent of "base". Additionally, ldso_so_support is also provided in
the libc API to cut the dependency early for libc/posix libraries.
Issue #3720
This depot package is the runtime for rtc_drv and system_rtc server with
coordinated update of system and hardware RTC via reports. It replaces
drivers_rtc which was never freestanding drivers package and, therefore,
has to be accompanied with a running platform_drv etc.
Fixes#3680
