So far, this test used dynamic_rom for the re-configuration of the nic router
and tested for the expected ping results by inspecting the log with the run
tool. However, this approach had two issues:
* Timing differs significantly on different targets and so the dynamic_rom had
the difficult task of compensating with heuristics without bloating the test
duration too much.
* In case of a failing test, it was difficult to determine the cause as the
test kept running and produced output for quite some time and there was also
no specific error message but only a generic timeout.
These two issues are now fixed by introducing a test component that listens to
the ping-result report and manages the nic router configuration. The new
component exits early on failure and provides information on the error
circumstances. Furthermore, the component advances to the next test step only
after having seen the expected result of the active test step and thereby
removes the need for heuristics about target timing.
Fixes#5192
At least on x86_64/x86_64/pc/hw|nova, the test used to fail because the net
setup sometimes required more than the 3 seconds that the test was giving each
step. This commit raises the step timeout to 5 seconds and the test timeout
from 70 to 90 seconds in order to be on the safe side.
Ref #5192
This commits updates the contrib sources to version 8.7.1.
This version requires more random entropy as it queries OpenSSL
about the current random state and will bail if it is not sufficient.
Doubling the content of the '<inline>' VFS plugin as used in static
configurations seems satisfactory.
Furthermore DNS resolving needs a configured '<pipe>' plugin to work
properly.
Fixes#5184.
Rarely. it might happen that events got received shortly before the complete
set of relevant USB devices got recognized. Filter more output in test metric
to stay robust.
Replace the USB session API by one that provides a devices ROM only,
which contains information about all USB devices available for this client,
as well as methods to acquire and release a single device.
The acquisition of an USB device returns the capability to a device session
that includes a packet stream buffer to communicate control transfers
in between the client and the USB host controller driver. Moreover,
additional methods to acquire and release an USB interface can be used.
The acquisition of an USB interface returns the capability to an interface
session that includes a packet stream buffer to communicate either
bulk, interrupt, or isochronous transfers in between the client and the
USB host controller driver.
This commit implements the API changes in behalf of the Genode C API's
USB server and client side. Addtionally, it provides Usb::Device,
Usb::Interface, and Usb::Endpoint utilities that can be used by native
C++ clients to use the new API and hide the sophisticated packet stream API.
The adaptations necessary target the following areas:
* lx_emul layer for USB host and client side
* Linux USB host controller driver port for PC
* Linux USB client ports: usb_hid_drv and usb_net_drv, additionally
reduce the Linux tasks used inside these drivers
* Native usb_block_drv
* black_hole component
* Port of libusb, including smartcard and usb_webcam driver depending on it
* Port of Qemu XHCI model library, including vbox5 & vbox6 depending on it
* Adapt all run-scripts and drivers_interactive recipes to work
with the new policy rules of the USB host controller driver
Fixgenodelabs/genode#5021
Newer Qemu variants quit with an error about already existing devices
if the same device-id is add and removed in a loop fast. To circumvent
this strange behaviour, simply use consecutive device id numbers.
Ref genodelabs/genode#5021
The key element of the improvement is differentiated processing of
events of the following device types.
Mouse: relative motion
Pointer: absolute motion (Qemu usb-tablet and IP-KVM devices)
Touchpad: relative motion via absolute touchpad coordinates
Touchtool: absolute motion (e.g., stylus)
Touchscreen: absolute motion and finger (multi-) touch
Processing is done in two stages for one "input packet". First, all
events of the packet are recorded into the current evdev state with
device-type specific operations. Then, appropriate Genode input events
are generated from the accumulated evdev state in the submission stage
(again by device-type specific functions).
A simple version of tap-to-click was added to the touchpad support.
Fixes#5105
The lxip_raw.run script will spawn a client/server scenario that tests
Genode C-API calls. The scenario can be used standalone, meaning no
actual network card is required.
issue #5104
The former implementation relied on input drvdata always pointing to
struct hid_device, which is not true for Wacom touch devices (at least).
Now, we implement the input handler for devices providing LEDs
(evbit[EV_LED] set) only and use input_inject_event() to set the LED
states.
Several nightly network-related tests fail currently on sel4/pc because the
new e1000 NIC driver requires more capabilities. The "drivers nic" package
was already adapted to the new requirement but some tests fail to provide
enough caps to the corresponding sub system. This commit tries to fix all
remaining tests.
Ref #4923
Since the wireless LAN driver is actually a 'Libc::Component' due to
its incorporation of the 'wpa_spplicant' application, we have to
intercept its construction because we have to initialize the Lx_kit
environment before any static ctors are executed. Most Linux initcalls
are implemented as ctors that will be otherwise implicitly executed
before the controll is given to us in 'Libc::Component::construct'.
Issue #4927.
This commit changes the firmware handling from requesting each
firmware file as a ROM module that is checked against a list of
known images (including their size) to requesting each file via
the local VFS of the 'wifi_drv'. This allows for using the original
probing mechanism that tries to select a matching firmware version.
The 'repos/dde_linux/src/drivers/wifi/README' file contains more
detailed information on how to configure the driver.
Issue #4861.
The bulk of the driver code now lives in the 'dde_linux' repository,
which is available on all platforms, from where it can be referenced by
other repositories.
The 'wifi_drv' binary was delegated to a generic harness that includes
all configuration and management functionality shared by all wireless
device driver components, e.g., the wpa_supplicant. The code of the
device driver emulation environment is located in 'src/lib/wifi'. It
is referenced by the platform-specific driver library that resides in
the corresponding platform repository. The runtime configuration needs
to point the driver to proper driver library.
The platform-specific library is in charge of orchestrating the contrib
source utilized by the driver as well as providing the 'source.list'
and 'dep.list' files. It must include the generic library snippet
'repos/dde_linux/lib/wifi.inc' that deals with managing the emulation
environment code.
The 'repos/dde_linux/src/drivers/wifi/README' file contains more
detailed information on how to deploy the driver.
Issue #4861.
Instead of having a generic "virt_qemu" board use "virt_qemu_<arch>" in
order to have a clean distinction between boards. Current supported
boards are "virt_qemu_arm_v7a", "virt_qemu_arm_v8a", and
"virt_qemu_riscv".
issue #4034
With this commit, the WireGuard component exits with a descriptive uncaught
exception on invalid configurations or when the user attempts to re-configure
attributes that are not re-configurable (private_key, listen_port, interface).
This is particularly important when it comes to the not re-configurable private
key. If the component would just ignore the attempt to override the private
key, the user may come to believe that his old (potentially compromised)
private key is not in use anymore.
The fact that the component now exits instead shouldn't be a problem, as the
user would have to restart the component anyway in order to apply the new
attribute values.
The commit also extends the wg_reconfig run script to test that WireGuard
exits on the attempt to re-configure the private key.
Ref #4520
Support removing peers by removing them from the component configuration.
This commit also introduces the wg_reconfig run script that tests adding and
removing single peers.
Ref #4520
A userland component that ports the Linux WireGuard kernel module (originally
from kernel version 5.14.21) and integrates it via a NIC session (public
network side) and an Uplink session (private network side). The
WireGuard-specific device configuration is done through the component
configuration. The port is done using lx_emul, lx_kit and the virt_linux
targets. The commit adds also 4 corresponding run scripts of which 3 are fully
automated of which 1 is added to the autopilot.
:Warning:
Although in principal functioning, the WireGuard port has not been exposed to a
sufficient amount of real-world testing, so far. Therefore, we strongly
recommend not to use it in any security-critical scenarios! There is no
guarantee that the port meets any of the security goals pursued by the
WireGuard protocol or other WireGuard implementations!
Ref #4397
