The hover reports provides information about the session currently
pointed-to, i.e., hovered session. It can be enabled by the 'hover'
attribute of nitpicker's 'report' configuration element
<report hover="yes" />
Fixes#1442
For the USB-Armory, we use a newer version of Linux (3.18) as for the
i.MX53-QSB. The main difference is, that the newer Linux uses a DTB instead of
ATAGs.
Fixes#1422
* enables world-switch using ARM virtualization extensions
* split TrustZone and virtualization extensions hardly from platforms,
where it is not used
* extend 'Vm_session' interface to enable configuration of guest-physical memory
* introduce VM destruction syscall
* add virtual machine monitor for hw_arndale that emulates a simplified version
of ARM's Versatile Express Cortex A15 board for a Linux guest OS
Fixes#1405
The handling of MMIO regions now supports more pathological cases with
weird cross references. Also, MMIO regions are releases after the
parsing is done.
Fixes#998
Instead of returning an uint64_t value, return a structured time stamp.
This change is only visible to components using Rtc_session directly.
Fixes#1381.
By blocking on a timeout, we yield the CPU in order to give a
concurrently running sporadic process a chance to obtain ROM modules.
Otherwise, such requests would be deferred until the ROM prefetcher
completes its operation or in the unlikely event that the prefetcher
gets preempted.
Fixes#1378
Instead of fixing the missing dynamic facilities of the AHCI driver
backends for x86 and Exynos5, just avoid to create/destroy the backend
for every new connection, but always use one and the same object.
The AHCI drivers need to be re-written anyway, see issue #1352 for instance,
we can make it more robust for the dynamic case then.
Fixes#786Fixes#1133
When building Genode for VEA9X4 as micro-hypervisor protected by the ARM
TrustZone hardware we ran into limitations regarding our basic daily
testing routines. The most significant is that, when speaking about RAM
partitioning, the only available options are to configure the whole SRAM
to be secure and the whole DDR-RAM to be non-secure or vice versa. The
SRAM however provides only 32 MB which isn't enough for both a
representative non-secure guest OS or a secure Genode that is still
capable of passing our basic tests. This initiated our decision to
remove the VEA9X4 TrustZone-support.
Fixes#1351
Declaring the SP804 0/1 module and its interrupt to be non-secure prevents the
secure Genode from receiving the interrupt and hence the timer driver in the
secure Genode doesn't work.
Fixes#1340
The commit uses a fixed kernel branch (r8), which fixes a caching bug
observable in the Genode host. The quirk detecting the circumstance in the
timer service is obsolete now and is removed.
Fixes#1338
The way this function is currently used in dde_linux expects this
function to return. Since there is dde_kit_panic it should better
be used in such a case the output should block.
The alias is rather Linux-specific and also prevents particularly
tailored jiffies implementations. For the existing dde_linux ports (usb
and lxip) we just define jiffies to be dde_kit_timer_ticks with a
preprocessor macro.
The new 'session_control' function can be used to perform operations on
the global view stack that span one or multiple sessions, e.g., bringing
all views of specific sessions to the front, or hiding them.
When X-ray mode is active, nitpicker filters motion events that are not
referring to the currently focused domain. However, domains configured
as xray="no" (such as a panel) need to obtain motion events regardless
of the xray mode. This patch relaxes the motion-event filtering to
accommodate such clients.
The buffer offset was wrongly accounted for. The miscalculation went
unnoticed until now because the buffer offset was apparently never used
in combination with alpha-channels.
If a domain is configured as xray="no", we want to let the views of the
domain respond to input events like in flat mode, even if xray mode is
active. Normally, the input mask of views with an alpha channel is
disregarded in X-ray mode. However, for non-ray views, the input mask
should always be considered.
The 'Signal_rpc_member' takes care about dissolving its signal context
from the receiver. So we don't need to manually perform this operation
in the session destructor.
It turned out that the controller configuration can change during the self
tests, so now it is read before running the tests and restored afterwards.
Fixes#1260.
This component merges the input events of multiple sources.
Example configuration:
<start name="input_merger">
<resource name="RAM" quantum="1M" />
<provides>
<service name="Input" />
</provides>
<config>
<input label="ps2" />
<input label="usb_hid" />
</config>
<route>
<service name="Input">
<if-arg key="label" value="ps2" /> <child name="ps2_drv" />
</service>
<service name="Input">
<if-arg key="label" value="usb_hid" /> <child name="usb_drv" />
</service>
<any-service> <parent /> <any-child /> </any-service>
</route>
</start>
For each 'input' config node, the component opens an 'Input' session with the
configured label. This label is then evaluated by 'init' to route the session
request to a specific input source component.
Fixes#1259.
The backend allocator for the slab is a sliced heap, which hands out
allocations with page-size granularity (4096 bytes). Therefore, the
slab-block size should also be about a multiple of the page size minus
some bytes of overhead.
Additional adjustments:
- The slab-block size and the default quota-upgrade amount for SIGNAL
sessions depends on the platform bit width now.
- The signal test also stresses the case of many managed context in one
session including creation and destruction of the used signal receiver
in repeated rounds.
- correctly catch and report non-existing root directories
- remove *all* leading slashes from root-directory attributes and
sanitize empty declarations to current working directory
Before the pointer handling was removed from the nitpicker server, the
pointer was always the first view, which was skipped in the find_view
function. However, since we support pointer-less operation by now, we
have to consider all views starting with the top-most one.
This patch fixes a potential race condition that could happen if a
client connects to nitpicker before the signal for the import of the
initial configuration was delivered. In this case, nitpicker would be
unable to assign a domain to the session (because this information comes
from the configuration), rendering subsequent calls to 'mode' invalid.
The patch solves this problem by manually calling the signal handler
for importing the configuration.
This patch reimplements the nit_fb server using the server API and
thereby enables the dynamic resizing the of the framebuffer.
Note that the new implementation does not feature the ability to perform
a periodic refresh via the 'refresh_rate' configuration argument. This
feature was removed because the refresh policy can (and should) always
be implemented on the client side.
This patch introduces a way to tweak the coordinate systems per
domain. The 'origin' attribute denotes the origin of the coordinate
system. Valid values are "top_left", "top_right", "bottom_left",
"bottom_right", and "pointer". Furthermore, the screen dimensions as
reported to the nitpicker client can be tweaked per domain using the
'width' and 'height' attributes. If the specified value is positive,
it is taken as literal boundary. If the value is negative, the size
if deducted by the specified amount from the physical screen area.
This patch introduces a mandatory layer attribute to domains. The layer
ordering is superimposed on the stacking order of the views. The
top-most layer can be assigned to a pointer-managing client. An example
for such a pointer is located at os/src/app/pointer. It replaces the
formerly built-in nitpicker mouse cursor.
The new layering mechanism replaces the former "stay-top" session
argument. So the Nitpicker::Connection no longer takes the stay-top flag
as the first argument.
A session can be explicitly configured to present its views in a
completely opaque way when the X-ray mode is active as opposed to the
default where each view gets tinted and surrounded by a frame. This
is useful for decorator views, which look overly busy otherwise.
This patch introduces the notion of a "domain" to the nitpicker
configuration concept. Session policies always refer to a domain where
multiple session policies can refer to the same domain. Thereby a domain
provides a way to express the grouping of sessions. This is useful for
applications that open multiple nitpicker sessions (such as Qt5 apps that
use one nitpicker session per window, menu, etc.). We want to assign all
those sessions to a single domain.
The configuration looks as follows:
<config>
...
<domain name="default" color="#ffffff"/>
<policy label="" domain="default"/>
...
</config>
This patch changes nitpicker's session interface to use session-local
view handles instead of view capabilities. This enables the batching
of multiple view operations into one atomic update.
This patch introduces a focus-management facility to the nitpicker
session interface. As a side effect of this change, we remove the notion
of a "focused view". There can only be a "focused session". This makes
sense because input is directed to sessions, not views.
Issue #1168
This patch changes nitpicker's way of redrawing. Originally, redraw
operations were triggered immediately by the RPC functions invoked by
clients. In the presence of clients that invoked a large number of those
functions, the server could become overloaded with processing redraw
operations. The new version performs redraw operations out of band with
the RPC functions. Similar to the design of the DOpE GUI server, redraw
operations are processed periodically. The RPC functions merely modify
meta data and track the dirty areas that need to be updated.
Consequently, nitpicker's RPC functions become light-weight operations.
As a nice collateral effect of this patch, nitpicker's internal
structure could be simplified because the drawing backend is no longer
needed by the code that dispatches the RPC interface.
The new Rom_session::update function can be used to request the update of
an existing ROM dataspace. If the new data fits into the existing
dataspace, a subsequent call of 'dataspace' can be omitted. This way,
ROM dataspace updates don't suffer from page-fault-handling costs that
would occur when replacing the dataspace with each update.
This reverts commit edc03489b3.
Since commit
"timer: nova specific version of the service"
a nova specific timer is used and this quirk is not necessary anymore.
Issue #1211
The count value can be used to batch timeouts. I.e., if a periodic
timeout triggered multiple times before the timer had a chance to
process them, the count corresponds to the number of passed periods.
On ARM it's relevant to not only distinguish between ordinary cached memory
and write-combined one, but also having non-cached memory too. To insert the
appropriated page table entries e.g.: in the base-hw kernel, we need to preserve
the information about the kind of memory from allocation until the pager
resolves a page fault. Therefore, this commit introduces a new Cache_attribute
type, and replaces the write_combined boolean with the new type where necessary.
Depending on 'src_w' and 'dst_w', different lines of a block to copy may be
32-bit aligned or not, so the alignment of each line needs to get checked.
Fixes#1111.
This commit adds a 'parent_view()' function to the loader session, which
allows to set the parent view of the subsystem's Nitpicker view.
If the function is to be used, this must get done before calling
'start()'.
Fixes#1172.
This patch changes both the Input::Session interface and the skeleton
for the server-side implementation of this interface
('input/component.h').
The Input::Session interface offers a new 'sigh' function, which can be
called be the client to register a signal handler. The signal handler
gets notified on the arrival of new input. This alleviates the need to
poll for input events at the client side.
The server-side skeleton for implementing input services underwent a
redesign to make it more modular and robust. I.e., there are no
global functions needed at the server side and the event-queue
enable/disable mechanism is implemented at a central place (in the root
component) rather than inside each driver.
Fixes#46
This patch changes the top-level directory layout as a preparatory
step for improving the tools for managing 3rd-party source codes.
The rationale is described in the issue referenced below.
Issue #1082
