Note, OpenSSL now comes as one combined depot archive *openssl* that
replaces the former *libssl* and *libcrypto* archives. The libraries are
still separate binaries for compatibility with legacy software.
Issue #3773
It seems that with the nigthly autopilot the data port (that is choosen by the
client) may stay some time (minutes) allocated after the a test run. This
causes successive tests to fail when trying to reuse the port.
* Use a unique data port for each target platform in the range of 18000-18099.
* Add documentation on how to prepare for running the test on a Linux target.
* Remove Qemu-specific code paths as Qemu isn't supported anymore by the script
since the introduction of the Uplink session (running with a NIC router on
Qemu was never supported and now we always need a NIC router).
Ref #3961
* Remove SPEC declarations from mk/spec
* Remove all board-specific REQUIRE declaratiions left
* Replace [have_spec <board>] run-script declarations with have_board where necessary
* Remove addition of BOARD variable to SPECS in toplevel Makefile
* Move board-specific directories in base-hw out of specs
Let the NIC router provide an Uplink service besides the Nic service that it
already provided. Requests for an Uplink session towards the NIC router are
assigned to Domains using the same <policy> configuration tags that are used in
order to assign Nic session requests. The MAC addresses of Uplink session
components are _NOT_ considered during the allocation of MAC addresses for NIC
session components at the same Domain. The task of avoiding MAC address clashes
between Uplink session components and Nic session components is therefore left
to the integrator. Apart from that, Uplink session components are treated by
the NIC router like any other interface.
Ref #3961
Instead of the generic name, call the PCI driver 'pci_audio_drv'.
This is preliminary clean-up work before introducing the USB audio
driver.
Issue #3929.
Right now the same code dealing with nic setup on qemu is duplicated
in many different run scripts. It makes it unnecesarily complex to
change the existing config or add support for new nic types. Lets move
all this common code to qemu.inc.
Ref #3825
Introduce the managing_system privilege for components like the
platform_driver to allow it to call system management functionality
that is reserved by kernel or special firmware, e.g., ARM Trusted Firmware.
The former RAM resource configuration attribute `constrain_phys`,
which enabled to constrain the region of physical RAM to be used,
gets replaced by the new, broader managing_system configuration
attribute of a `start` node. It gets enforced by the sandbox library.
Ref #3816
This patch prevents nitpicker from requesting a framebuffer and input
session by default because the regular use of nitpicker relies on the
capture-session and event-session interfaces by now.
For supporting the nested use of nitpicker via the gui_fb component, it
is still possible to enable the traditional behavior by explicitely
setting the 'request_input' and 'request_framebuffer' config attributes
to "yes".
Issue #3812
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
