This patch changes the 'Allocator' interface to the use of 'Attempt'
return values instead of using exceptions for propagating errors.
To largely uphold compatibility with components using the original
exception-based interface - in particluar use cases where an 'Allocator'
is passed to the 'new' operator - the traditional 'alloc' is still
supported. But it existes merely as a wrapper around the new
'try_alloc'.
Issue #4324
First, the former implementation has only considered the pure numerical
variant of the -m argument. Yet, qemu also allows specifying the amount
of memory by `-m 1G`, `-m size=1G` and more.
Second, the default amount of memory for BOARD=pc was 512M (800M in case of okl4).
Since the depot_autopilot.run also required at least 768M on all
platforms it seems reasonable to take 800M as a default value for BOARD=pc and
thereby remove the special treatment of okl4.
genodelabs/genode#4311
This patch adds a missing call of '_handle_decorator_margins' at
construction time. Up to commit "report_rom: versioning and explicit
notification" this problem was masked by an unconditional signal, which
implicitely triggered the call.
Issue #4274Fixes#4306
- CPU-architecture annotations
- Change order of top-level menu, moving Mesa driver to the end
- Add black_hole, recall_fs, file_fault
- Add usb_webcam, test-capture
- Add audio driver and mixer
- Add vbox6, keeping vbox5-nova-sculpt as fallback
- Remove recall_fs launcher, which is obsolete with the recall_fs pkg
- Replace system_clock by system_clock-pc pkg
Issue #4281
This follow-up commit to "sculpt: avoid flickering of leitzentrale"
allows nitpicker to double-buffer pixels during resize operation on a
screen size of 1920x1200.
This patch presents all press and release events to the pointer state,
fixing the problem that _key_cnt was decreased but never increased.
However, the inconsistency had no observable effects in practice.
Issue #4176
This patch ensures that the pointer report is updated not before all
input events are handled. The change does not solve any observed
practical issue but the potential problem was spotted while reviewing
the code.
Issue #4176
This patch changes the depot_query tool to filter the returned index
data depending on the 'arch' as specified for the query. This way, one
index file can support multiple CPU architectures while allowing
individual entries to be architecture-specific.
Fixes#4295
This patch adds the missing definition of 'prio_levels' in the prepare
sub init, fixing the warning:
[init -> runtime -> prepare] Warning: vfs: invalid priority, upgrading from -2 to 0
Issue #4281
Warning!
The current version of the file vault is not thought for productive use but
for mere demonstrational purpose! Please refrain from storing sensitive data
with it!
The File Vault component implements a graphical frontend for setting up and
controlling encrypted virtual file systems using the Consistent Block Encrypter
(CBE) for encryption and snapshot management. For more details see
'repos/gems/src/app/file_vault/README'.
Fixes#4032
Previously unconditional calls to Genode::log in cbe init and the cbe trust
anchor VFS plugin were made dependent on a verbosity flag that is set to
"false" by default.
Ref #4032
Instead of simply encrypting the private key with AES-256 when storing it to
the 'encrypted_private_key' file, wrap it using the AES-key-wrap algorithm
described in RFC 3394 "Advanced Encryption Standard (AES) Key Wrap Algorithm".
This is more secure and enables us to directly check whether the passphrase
entered by the user was correct or not.
Ref #4032
As the file formerly named 'secured_superblock' actually contains the hash of
the superblock that was secured, it was renamed 'superblock_hash'.
Ref #4032
As the file formerly named 'keyfile' actually contains the encrypted private
key of the Trust Anchor, it was renamed 'encrypted_private_key'.
Ref #4032
By now, the symmetric keys were only XOR'ed with the private key as placeholder
for a real encryption. Now they are encrypted using AES256 with the TA's
private key as key
Ref #4032.
A private key of 256 bits is generated pseudo-randomly using the jitterentropy
VFS plugin on initialization. The private key is stored in the key file
encrypted via AES256 using the SHA256 hash of the users passphrase. When
unlocking the CBE device, the encrypted private key is read from the key file
and decrypted with the hash of the users passphrase.
Ref #4032
Instead of using the user passphrase directly, use its SHA256 hash calculated
using libcrypto. The passphrase hash is still stored in the key file to be
used as base for the very primitive way of generating the private key.
Ref #4032
Closing the keyfile handle after a write operation wasn't synchronised to the
actual end of the write operation.
Issuing a write operation at the back end returns successfull as soon as the
back end has acknowledged that it will execute the operation. However, the
actual writing of the data might still be in progress at this point. But the
plugin used to close the file handle and declare the operation finished at this
point which led to warnings about acks on unknown file handles and leaking
resources. Now, the plugin issues a sync operation directly after the write
operation and waits for the sync to complete. This ensures that the plugin
doesn't declare the operation finished too early.
Ref #4032
The unlocking operation in the trust anchor was broken wich caused bad keys in
the CBE. This rewrites the whole operation to work as desired. Note that this
doesn't make it more safe! The private key is still almost the same as the
passphrase and stored plaintext.
Ref #4032
The plugin used to close file handles via the 'vfs_env.root_dir.close'.
However, this lead to resource leaks and apparently isn't the right way to
do it. Other VFS plugins do it by calling 'close' directly on the handle and
doing it in the trust anchor plugin also, fixes the leaks.
Ref #4032
Closing the hashfile handle after a write operation wasn't synchronised to the
actual end of the write operation.
Issuing a write operation at the back end returns successfull as soon as the
back end has acknowledged that it will execute the operation. However, the
actual writing of the data might still be in progress at this point. But the
plugin used to close the file handle and declare the operation finished at this
point which led to warnings about acks on unknown file handles and leaking
resources. Now, the plugin issues a sync operation directly after the write
operation and waits for the sync to complete. This ensures that the plugin
doesn't declare the operation finished too early.
Ref #4032
There were no means for issuing a Deinitialize request at the CBE using the
CBE VFS plugin. The new control/deinitialize file fixes this. When writing
"true" to the file, a Deinitialize request is submitted at the CBE. When
reading the file, the state of the operation is returned as a string of the
format "[current_state] last-result: [last_result]" where [current_state] can
be "idle" or "in-progress" and [last_result] can be "none", "success", or
"failed".
Ref #4032
When discarding a snapshot, the CBE VFS plugin didn't communicate the ID of
the snapshot to the CBE. Instead it set the ID argument to 0. Therefore the
operation never had any effect.
Ref #4032
The snapshots file system used to return the number of snapshots on
'num_dirent' when called for the root directory although it was expected to
return 1. This confused the tooling ontop of the VFS.
Ref #4032
Despite being readable, the files control/extend and control/rekey proclaimed
that they were not when asked. This caused the fs_query tool to not report the
content of the files although it could have.
Ref #4032
Stat calls on the control/extend and control/rekey files returned a bogus file
size that led to an error in the VFS File_content tool. The tool complained
that the size of the file determined while reading the content differs from the
one reported by the stat operation. Now, the stat call will always determine
the actual size of what would be read. However, it isn't guaranteed that this
size doesn't change in the time after the stat operation and before the read
operation.
Ref #4032
Both, trace_logger and vfs_trace had their own trace_buffer.h. This
commit consolidates the existing implementations and provides the
resulting trace_buffer.h at 'include/trace/'. It thereby becomes part of
the trace api archive.
genodelabs/genode#4244
WARNING: BREAKS CONFIG COMPATIBILITY!
This commit changes the configuration interface of the NIC router in a way that
may break systems that use the component without proper adjustment!
How to adjust:
At each occurrence of the 'dns_server_from' attribute in a NIC router
configuration replace the attribute name with 'dns_config_from'. The attribute
value remains unaltered.
DETAILED DESCRIPTION
The new attribute name 'dns_config_from' reflects that also other aspects of
the DNS configuration of the denominated domain are used by the DHCP server
that holds the attribute. This commit is a preparation for forwarding also the
domain name (DHCP option 15) with the mechanism behind the attribute.
Ref #4246
File size must be the same as the number of bytes that can be read from
the file. Otherwise, this will trigger a `Truncated_during_read`
exception.
Fixesgenodelabs/genode#4240
* the GPU multiplexer now offers the platform service to the Intel
framebuffer driver (driver_manager)
* ajdusted drivers_managed-pc to hand out resources to the GPU driver
* adjust quotas
issue #4233
Adapts Dir_file_system::open_composite_dirs in a way that it returns "success"
when the leaf node of the path is an empty directory but "lookup failed", as
usual, if one of the other directories on the way to the leaf node is empty.
I couldn't find a technical reason why we used to return "lookup failed" when
only the leaf node was empty.
The commit also adds a test for en empty root directory and empty
sub-directories to the fs_query run script.
Fixes#4198
The fs_query component used to exit with an uncaught exception if a queried
directory didn't exist. Now, fs_query will catch this event and simply skip the
affected query, thereby indicating to the user the inexistence of the
queried directory.
Ref #4032
If no window has ever been focused, next() always returns an invalid
window id. As a consequence, there is no way to cycle through the focus
history without an explicit focus event (e.g. mouse hover).
Instead, next() should return the first window from the focus history if the
currently focused window is not present.
Fixesgenodelabs/genode#4164
Adds the <new-file> operation to the fs_tool. When configured, the
<new-file path="...">...</new-file> tag will cause creation or overwriting of
the file given through the 'path' attribute. The file will contain the text
content of the tag.
Ref #4032
This patch moves the utility from the app/text_area to os/vfs.h to make
it easier to use by other components. By hosting the 'New_file' as a
friend alongside the 'Directory', we can now pass a 'Directory' as
constructor argument, which is consistent with other utilities such as
'File_content'.
As a further improvement, the new version supports the implicit creation
of the directory hierarchy leading to the new file.
Issue #4032
By adding an attribute 'size="yes"' to a query, one instructs fs_query to
report also the size of each queried file as attribute 'size' of the
corresponding 'file' node.
Ref #4032
The fs_query component used to try watching all files it found resulting in
errors on files that are not watchable. For some files, however, the watch-
feature doesn't make sense as they are not readable (no content, no size).
Now, fs_query will check first whether a file is readable and skip watching
if it isn't.
Ref #4032
When configuring fs_query to print the content of files it used to try so for
all files it found resulting in errors on files that are not readable. Now,
fs_query will check first whether a file is readable and skip printing the
content of those that are not.
Ref #4032
Managing ssh event file descriptors was performed from two different
threads which could cause reallocation of structure used in other thread
in a call to 'poll' function.
Splitted initialization to parts and moved ssh event part into ssh loop.
Issue #4095
Moved creating ssh loop thread after initialization of wake up server
file descriptors to make sure that they will be properly handled even in
first loop run.
Issue #4095
The default size is on most kernels 512M. On OKL4 we have to use 800M,
because of the statically configured memory ranges in the OKL4 kernel.
By avoiding a specific amount of memory, the default Qemu memory sizes are
used.
Issue #4095
This patch fixes a GCC-10 compile error. Even though the optimization
was quite effective - I measured a speedup of factor 2 - it is not all
that important for the overall application performance. In the nano3d
case, we are talking about 1 vs. 2 percent of CPU time.
Fixes#4140
pthread.0 acquires a write buffer mutex and calls potentially
blocking fs operations. The EP thread handles session requests and tries to
acquire the same write buffer lock. IO progress events for pthread.0 are
handled by the EP thread, which however is blocking on the write buffer mutex.
The commit uses two write buffers, one which is filled by the EP and a second
which is used by pthread.0. The two buffers are swapped protected by a mutex
without invoking blocking fs operations.
Issue #4095
