Nitpicker's 'Session:focus' call used to trigger a one-off focus change
at call time. This focus change did not pass the same code paths as a
focus change triggered by a "focus" ROM update, which led to
inconsistencies.
This patch changes the implementation of 'Session::focus' such that the
relationship of the caller and the focused session is preserved after
call time. Whenever the calling session is focused in the future, the
specified session will receive the focus instead. So 'Session::focus'
represents no longer a single operation but propagates the information
about the inter-session relationship. This information is taken into
account whenever the focus is evaluated regardless of how the change is
triggered.
This makes the focus handling in scenarios like the window manager more
robust.
Issue #2746
Relative motion events with a motion vector of (0,0) should not exists.
They cause jittery movements of nitpicker's pointer position. This
patch filters out such events.
This tests ping with simple IP forwarding, ping with NAPT as well as
forwarding of ICMP "Destination Unreachable" messages through the NIC
router.
Issue #2732
The 'ping' component continuously sends ICMP Echo requests to a given IP host
and waits for the corresponding ICMP Echo replies. For each successfull ICMP
Echo handshake it prints a short statistic. By now, it can be used only with a
static IP configuration. The size of the ICMP data field can be configured. It
gets filled with the letters of the alphabet ('a' to 'z') repeatedly.
Issue #2732
Originally, the timeout framework caused deadlocks when acquiring the same
lock from different timeout handlers. This use case is now tested in the
timeout test.
Fixes#2704
To handle all pending timeouts in the context of scheduling a timeout
was only necessary because the Timeout framework once made use of the
Alarm framework. The method Alarm_scheduler::schedule_absolute took an
absolute deadline as argument and we couldn't change this beause the
Alarm framework was also used without the Timeout framework. We had to
calculate this absolute deadline with the now time of the Timeout
framework but the Alarm framework has its own now time that is always a
bit behind the one of the Timeout framework. This lead to bad decisisons
when finding the right position for the new timeout. Now, we can call
schedule_absolute with a relative duration and thereby fix the problem.
When we schedule an absolute timeout without considering the small time
difference, the end-time for the timeout that is calculated using the
local time value is also smaller than the expected end-time. This can
also lead to directly triggering timeouts that should have triggered
with a certain delay.
As it is not trivial to update the local time value while scheduling a
timeout _without_ calling other timeout handlers, we simply raise the
duration of the new timeout by the age of the local time value.
Issue #2704
This fixes the problem that large timeouts, when rescheduled, are interpreted
to be from the last now_period instead of, what would be right, the next
now_period. This occured if there were multiple pending alarms at the head of
the queue and the reschedule of the first one was done with the other outdated
deadlines still in place.
Issue #2704
Instead of taking the absolute deadline of a timeout as argument from
outside (where it is calculated with a freshly requested now time), we
now take a relative duration as argument and calculate the deadline with
the scheduler-internal now time (which can be a little bit outdated).
This enables us to schedule timeouts without updating the internal now time
and thereby handle all pending timeouts.
Issue #2704
Integrate the code of the Alarm framework directly into the Timeout
framework. The former Alarm-framework methods are all private to the
corresponding classes of the Timeout framework and get prefixed with
'_alarm__'. The latter avoids name clashes and makes it easier to
simplify the code later.
Issue #2704
In the domain class there were several places where output was generated
not conforming to the typical output format of the router ("[domain]
event: parameters").
Issue #2670
When having an interface that yet is not attached to a domain, then a new
configuration comes in and the interface receives a domain name (via the
policy tag) but the corresponding domain doesn't exist, an exception
Domain_tree::No_match is thrown but was not caught and handled until now.
Issue #2670
This follows the guidelines in RFC 5508 to enable forwarding of ICMP
"Destination Unreachable" that correspond to an existing link state in
the NIC router. It also serves as blueprint for forwarding ICMP error
messages in general (They are merely not enabled because we don't test
them).
Issue #2732
By now, the 'verbose packets' output when sending packets was printed after
finish sending the packet. This makes following the packet flow harder if you
have multiple components that print such information.
Issue #2732
The mac_first attribute tells the MAC-address allocator of the router
from which MAC address to start allocating. This is useful, for
instance, if you have nested nic_routers. In this case, identical
MAC-allocator settings have led to name clashes in the past, so, you
want to be able to configure them differently.
Issue #2732
This follows the guidelines in RFC 5508 to enable ICMP echo through a NAPT
channel of the NIC router. It serves also as blueprint for ICMP queries in
general (they are merely not enabled because we don't test them by now).
Issue #2732
The 'verbose packets' output previously was not generated for Interfaces
without a domain. But this is desirable as the router nonetheless
receives packets at such interfaces. This is now fixed and such output
is simply prefixed with a "[?]" denoting that the interface has no
domain.
Issue #2732
We missed to zero-out the ECN field in IPv4 packets. We don't use the ECN
field but there might be old data left in the packet RAM allocated by the
NIC packet streams. If we don't zero-out ECN it might leak old data.
Issue #2732
Add a new 'Vfs_watch_handle' type to the VFS interface. This handle type
will pass a handle context up through the I/O handler to the application
when a notification event occurs.
Watch support implemented for RAM and File_system plugins, all other
file-systems return WATCH_ERR_STATIC by default.
Test at run/fs_rom_update_ram and run/fs_rom_update_fs.
Fix#1934
A ring buffer that uses a single dataspace mapped twice in consecutive
regions. This allows any operation that is less or equal to the size of
the buffer to be read or written in a single pass. The capacity of
Magic_ring_buffer is defined at runtime.
Fix#2725
This commit introduces a VFS plugin that exposes the glyphs and
metadata of a TrueType font as a pseudo file system. The TTF font data
is obtained from the VFS. The resulting pseudo file system is a
directory that contains the files 'glyphs', 'baseline', 'max_width',
and 'max_height'.
The counter part of the plugin is the 'Vfs_font' class that implements
the 'Text_painter::Font' interface by accessing the pseudo file system
as provided by the TTF VFS plugin.
Fixes#2740
This patch enhances the VFS access utilities of gems/vfs.h to be usable
with a prior created root directory. It also adds a
'File_content::bytes' method for operating of the raw content, which is
needed in situations where the data pointer is passed to a third-party
parser.
This patch improves the `Text_painter` utility that is commonly used by
native Genode components to render text:
- Support for subpixel positioning
- Generic interface for accessing font data
- Basic UTF-8 support
Since the change decouples the font format from the 'Text_painter' and
changes the API to use the sub-pixel accurate 'Text_painter::Position'
type, all users of the utility require an adaptation.
Fixes#2716
This file system is meant as a building block for pseudo file systems
that host a directory of several small files where each corresponds to
an attribute of the pseudo file system.
By letting the 'Dir_file_system' accept an arbitrary 'File_system'
as root directory, we can use the 'Dir_file_system' as a building
block for creating other file-system types.
This patch enables the use of the VFS from VFS plugins by passing a
reference of the root directory to the constructors of file-system
instances. Since it changes the signature of 'Vfs::Dir_file_system',
any code that uses the VFS directly requires an adaptation.
Fixes#2701
Aligning memory to page size will require at lead 8KB per allocation (even for 8
bytes). This should severely reduce memory requirements of all dde_linux
projects.
related to #2731
If the remote DNS server address value of a DHCP server changes, the affected
interfaces do a link down/up to inform all DHCP clients that they should
re-request their DHCP info.
Issue #2730
The dns_server_from attribute of the dhcp-server tag has effect only if
the dns_server attribute of the same tag is not set. If this is the
case, the dns_server_from attribute states the domain from whose IP
config to take the DNS server address. This is useful, for instance, if
the stated domain receives the address of a local DNS server via DHCP.
Whenever the IP config of the stated domain becomes invalid, the DHCP
server switches to a mode where it drops all requests unanswered until
the IP config becomes valid again.
Issue #2730
Until now, the DHCP server of a domain was re-constructed each time the
IP config changed. This is not necessary as a domain that acts as DHCP
server must have a static IP config as it would be senseless to act as
DHCP server and client at the same time. Now, a configured DHCP server
is constructed only when the Domain gets constructed and stays alive
until the domain gets destructed. Furthermore, we now throw Domain::Invalid
if there is no static IP config plus a DHCP server configured. However, by
now, this exception is not caught as it is not trivial to destruct the
domain at this point.
Issue #2730
The Interface constructor previously tried to attach to a domain. This
might include sending a DHCP request to get the domain a valid IP config.
But in order to achieve this, the constructor used a pure virtual method
of Interface which crashes due to the unfinished vtable. To fix this bug,
the attach attempt was moved to a new Interface::init method.
Issue #2730
Instead of Pointer<T>::set use assignment operator with implicit constructor
from T-reference. Instead of Pointer<T>::unset use assignment operator with
Pointer<T>(). Instead of Pointer<T>::deref provide () operator.
Issue #2730
A very basic test of the re-configurability. It overwrites the configuration
once without making any changes, once with removing all domains except
uplink, and a third time recovering to the initial configuration to see if
the clients keep going as soon as their domains are back.
Fixes#2670
The router reacts as follows to a configuration change:
1) Construct new internal configuration representation (the old one stays
in place to be able to do comparisons in the following steps)
2) Iterate through all user-dependent objects (interfaces, link states, ARP
information, DHCP information) and re-check which remain valid with the
new configuration and which must be dismissed.
3) Adapt the objects that remain valid to the new configuration (re-write
references) and remove or detach the dismissed objects.
4) Do a link state DOWN at each interface and a link state UP at each
interface that remains attached to a domain.
5) Replace the old internal configuration representation with the new one
This way, the router keeps as much user dependent states as possible
while going through a configuration change. Thus, overwriting the old
configuration with an exact copy of itself is (almost) transparent to
clients of the router. Almost, because there are things the router must
do on every configuration handling, like re-scheduling the expiration
timeouts of links.
Ref #2670
The for_each method of the List wrapper remembers the next list item
before calling the functor on the current one, so, the current one can
be destroyed during the functor.
Ref #2670
Clients can connect at any time to the NIC router. The interfaces (sessions)
get attached to the appropriate domain as soon as it appears. This implies
that interfaces can also be detached from a domain without beeing destructed
when the domain disappears. All user dependent states of an interface such as
the link states, DHCP allocations and ARP information get lost when the
interface gets detached.
Ref #2670
This separates the decision wether to log the received and sent packets
from the 'verbose' attribute. This information is now only logged if
'verbose_packets' is switched on. If 'verbose' is switched on, only
routing decisions and optional hints are printed.
Ref #2670
We disable super-page I/O mappings because our unmap code does not flush
local mappings from core and, thus, breaks later re-mappings of
different page size.
Issue #2547
Switch port I/O based PCI config space access to memory-mapped IO. The
base address of the PCI configuration space is acquired by mapping the
ACPI ROM and reading the first <bdf> node. An exception is thrown if the
first <bdf> node is not for PCI domain zero or if multiple <bdf> nodes
exist. This is to reduce complexity and also because multiple PCI
domains are rare.
The PCI configuration space is accessed via I/O mem dataspace which is
created in the platform_drv root and then passed on to the PCI session,
device components and finally to the actual PCI config access instances.
The memory access code is implemented in a way to make it work with Muen
subject monitor (SM) device emulation and also general x86 targets. On
Muen, the simplified device emulation code (which works also for Linux)
always returns 0xffff in EAX to indicate a non-existing device.
Therefore, EAX is enforced in the assembly templates.
Fixes#2547
The KIP address range resides in virtual memory while io_mem alloc
manages physical-address ranges.
The patch enables the use of ECAM/MMCONF for PCI configuration.
Issue #2547
Link the EGL library with Mesa. SDL's `GL_GetProcAddress` now calls
`eglGetProcAddress` rather than lookup procedures directly in the Mesa
library.
Components may still wish to list 'mesa_api' in LIBS to access OpenGL
headers.
Fix#2711
Adjust managed dataspace (== max memory provided to rump kernel) based
on 32/64 bit architecture. On 32bit is it 256M, on 64bit is 4G.
Additionally limit the actual announced memory to rump by the available RAM and
by the maximum size of the managed dataspace.
Fixes#2709
The visibility of the client's view is re-evaluated at each animation
step. However, when the client appears long after the initial
fade-in/out animation is completed, the initial visibility state
remaines unchanged. This happens when booting the Sculpt scenario in
Qemu where the the nit_fb instances of the leitzentrale could not be
started in time. This patch fixes the issue by re-evaluating the view
visibility also at the view-creation time.
This prevents diagnostic messages like
Error: partial write detected 0 vs 31
for writes into already released socket directories due to a still-open
handle to the socket data file.
We need to update the blueprint pkg path as well in case the start node
is changed. Otherwise the query tool will keep using the initially
configured pkg path.
In case the signature file is corrupt, e.g. it could not be downloaded
successfully, the gnupg code just prints an error message but will not
return the error to the user. So we patch the code to return the error
and check the value in the calling code.
The sinfo API now also exports PCI devices without logical IRQs.
Therefore, explicitly check interrupt count in get_msi_params() function
and ignore such devices.
- Use latest Muen version
- Sync VirtualBox Muen subject state
- Drop unneccessary subject IP patch
- Adapt Muen RUN_OPTs
- Update documentation
Note: the GPL 2017 toolchain is now required and as the debug output
format has changed the mulog-subject.py script must be updated on
autopilot instances.
Remove the dependency on the deprecated LwIP libary.
Remove the progress logging callback. Should a progress indicator be
desired, a progress report would be more appropriate.
Fix#2684
This patch improves the error handling for the case where the depot
lacks the content of the to-be-deployed pkg. Instead of infinitely
reattempting to obtain blueprints for such content, the deploy tool
prints a single message.
This patch adds two key remappings for the magic keys of the sculpt
scenario. KEY_DASHBOARD toggles the leitzentrale. KEY_RESTART resets
the noux-control subsystem of the leitzentrale.
Issue #2676
If only a single AHCI device is present, the block service provided by
the drivers subsystem allows the client to refer to this block device
via the label 'default'.
Issue #2676
This patch adds a safety check to nit_fb to ensures that nit_fb never
runs out of RAM. Should the available RAM not suffice for resizing the
virtual framebuffer to a new mode, it keeps the current mode.
The Dir_file_system uses static cast to convert handles from the
application to a plugin local type. For this reason, only the local
handle type may be returned from 'opendir' or 'open'. This fixes the
unexpected behavior when opening directories as files.
Fix#2533
