This commit contains a backport of commit [1] that deals with updating
the event ring dequeue pointer more often to prevent unnecessary
'Event Ring Full' errors.
[1] 'usb: host: xhci: update event ring dequeue pointer on purpose'
(dc0ffbea5729a3abafa577ebfce87f18b79e294b)
Fixes#4296.
Unfortunately, our current implementation of 'wmb()' doesn't seem to do what we
want it to do. On base-hw + imx6q_sabrelite, the write of bdp->cbd_sc seems to
get re-ordered after the write to txq->bd.reg_desc_active in the transmission
path of the contrib code. Due to this, the transmission of the packet is only
triggered the next time a packet is sent. However, we only quick-fix it by
enforcing the execution of the write with a volatile global read as we will
soon update the FEC NIC port with a new DDE approach anyway.
Fixes#4010
This patch takes advantage of block transfer interrupts on Intel XHCI
controllers which is used during isochronous transfers. Because of a bug
in hardware (see usb_host_isoc_bei.patch header), this feature has been
disabled for Intel leading to up to 8000 interrupts/s for isochronous
transfer causing severe CPU consumption on Genode. With this commit we
lower host driver consumption to normal levels.
issue #4149
This commit backports the Linux upstream commit (d4a6106) [*]
that introduces a check to prevent the sglist from being used
unconditionally.
[*] 'xhci: fix bounce buffer usage for non-sg list case'
Fixes#4116.
Thise driver supports USB LTE modems for Huawais' ME906s through MBIM
and provides a traditional Nic session. The "control" interface is a
Terminal session, which can be used via libmbim/mbimcli.
issue #3822
Move button-event reporting behind pointer-position update.
This is just a quickfix to restore correct pointer emulation with
dde_linux usb_drv. It does not change usb_hid_drv because the approach
is a questionable workaround of the current input event handling, which
reports events promptly on occurrence of inputs events and ignores
synchronization events completely. The original contrib code reported
the button press before absolute x and y positioning followed by a sync
event.
Issue #3019
Instead of using a somewhat incomplete module_param_named() macro,
which will influence other drivers, patch the driver that requires
this treatment.
Fixes#2169Fixes#2155
drm_framebuffer_remove takes care of references to CRTC pointers before
freeing up framebuffer object. Directly calling the destroy function may cause
dangling CRTC pointers pointing inside the framebuffer object.
Fixes#2140
On MVM only the initial scanning of APs works. If wpa_supplicant changes
from triggered scans to the scheduled-scanning hardware feature no
further scan results are reported. Therefore, we disable the
scheduled-scanning hardware feature until the issue is fixed.
Issue #2046
* Align pitch value to 64 byte (thanks to cnuke for investigation)
* Get rid of extra dataspace retrival and attachment, now that we always buffer
* Consistently name all lx_emul helpers: lx_* (get rid of dde*)
* Add missing file headers
Fix#1997
* enable i915 driver from Linux 3.14.5
* tested for generation 5 till 8 GPUs
The driver can be configured at run-time via the config ROM. Every
connector of the graphic card can be configured separately using the
following syntax
<config>
<connector name="LVDS-11" width="1280" height="800" enabled="true"/>
</config>
Also, when enabled within the intel framebuffer driver configuration like
the following
<config buffered="yes"/>
a simple ram dataspace is propagated to the client and the driver
itselfs copies from that buffer to the framebuffer triggered via refresh
calls. This option is useful to alleviate tearing effects.
The driver distributes all available connectors of the graphic card and
their supported resolutions via a report. It looks like follows
<connectors>
<connector name="LVDS-11" connected="1">
<mode width="1280" height="800" hz="60"/>
...
</connector>
...
</connectors>
The driver distributes the report only if this is stated within its
configuration, like the following
<config>
<report connectors="yes"/>
</config>
Fix#1764
The wifi_drv now provides two reports. The first one contains all
accesspoints that were found while scanning the supported frequencies.
The second one reports the state of the driver, i.e., if it is
conntected to an accesspoint or not. In addition to that, the driver
now gets its configuration via a ROM session.
More detailed information are available in 'repos/dde_linux/README'.
Issue #1415.
- essential support for 7260 chipset and DMA fixes
- assign mvm->pm_ops at beginning of function iwl_op_mode_mvm_start.
iwl_mvm_mac_setup_register() uses mvm->pm_ops, but it is called
before this field is set to a valid value.
- disable call to function iwl_mvm_prepare_multicast.
This function leads to a pagefault, as it aspects a list of multicast
addresses, but the list is empty as it is not generated by this port.
