Avoids the need to have per IRQ a thread that blocks synchronously for next
interrupt. Now a thread may wait for multiple IRQs as other signals
simultaneously.
In core no threads are required anymore for IRQs/MSI - the clients (either
the pci_drv or in case of MSI the driver) gets the IRQ delivered directly as
a ordinary Genode signal.
Useful since #1216 and #1487 is now available.
Commit applies feature of #1446 also to IRQ/MSIs.
The base-hw kernel on x86_64 currently assumes 254 MiB of RAM. The RAM
region is subtracted from the I/O mem allocator and therefore this range
is not available for device I/O.
If qemu is started with -m 128, the region for (emulated) PCI config
space access lies within this region and I/O mem allocation in the
pci_drv will fail. Giving qemu more RAM moves the PCI config space out
of the 254 MiB region, making the run/libc_ffat scenario with acpi work.
The assumption that IRQs in the legacy ISA range are always
edge-triggered is wrong. For the free-for-use IRQs it depends on the
actual device which uses the specific IRQ. Therefore, treat IRQs 9, 10
and 11 as level-triggered.
Currently, libc_noux includes the 'base/src/base/env/platform_env.h' file
to be able to reinitialize the environment using the 'Platform_env'
interface. For base-linux, a special version of this file exists and the
inclusion of the generic version in libc_noux causes GCC 4.9 to make wrong
assumptions about the memory layout of the 'Env' object returned by
'Genode::env()'.
This commit moves the reinitialization functions to the 'Env' interface to
avoid the need to include the 'platform_env.h' file in libc_noux.
Fixes#1510
Some functions in the kernel, which create a static object and return its
address, are declared with a GCC 'const' attribute, which can cause GCC
4.9 to optimize the function call out and use the static object's address
without calling the constructor.
Fixes#1509
The information about connected devices is obtained from a ROM file named
'usb_devices', which is supposed to contain a device list as in the device
report generated by the USB driver (see issue #1506).
A policy for 'report_rom' would look like:
<policy label="vbox -> usb_devices" report="usb_drv -> devices"/>
If the 'usb_devices' ROM file is not available, a warning message gets
printed and VirtualBox continues without USB pass-through support.
The devices to be passed-through need to have a matching device filter in
the '.vbox' file. Example:
<USB>
<DeviceFilters>
<DeviceFilter name="USB Scanner" active="true" vendorId="04a9"
productId="2220" remote="0"/>
</DeviceFilters>
</USB>
The feature was tested with HID devices (mouse, keyboard) and a flatbed
scanner. Mass storage devices didn't work correctly (they also didn't work
with VirtualBox on Linux without the closed-source extension pack).
It should be made sure that the USB driver does not try to control the
devices to be passed-through itself, for example, when passing-through
a HID device, the '<hid/>' config option should not be set.
Fixes#1507
The report lists all connected devices and gets updated when devices are
added or removed.
Example report:
<devices>
<device vendor_id="0x17ef" product_id="0x4816"/>
<device vendor_id="0x0a5c" product_id="0x217f"/>
<device vendor_id="0x8087" product_id="0x0020"/>
<device vendor_id="0x8087" product_id="0x0020"/>
<device vendor_id="0x1d6b" product_id="0x0002"/>
<device vendor_id="0x1d6b" product_id="0x0002"/>
</devices>
There is no distinction yet for multiple devices of the same type.
The report is named "devices" and an example policy for 'report_rom' would
look like:
<policy label="vbox -> usb_devices" report="usb_drv -> devices"/>
The report only gets generated if enabled in the 'usb_drv' configuration:
<config>
<raw>
<report devices="yes"/>
</raw>
</config>
Fixes#1506
On NOVA, a Genode thread currently cannot destroy itself by destroying its
own 'Thread' object, because in 'Thread_base::_deinit_platform_thread()'
it cannot call 'Cpu_session::kill_thread()' anymore after it has revoked
its own UTCB.
As solution, the revocation of the UTCB can be delayed until its location
in the context area is needed by a new thread.
Fixes#1505
Enable a platform to specify how the MMIO memory allocator is to be
initialized. On ARM the existing behavior is kept while on x86 the I/O
memory is defined as the entire address space excluding the core only
RAM regions. This aligns the hw_x86_64 I/O memory allocator
initialization with how it is done for other x86 kernels such as NOVA or
Fiasco.
Perform lazy-initialization of FPU state when it is enabled for the
first time. This assures that the FXSAVE area (including the stored
MXCSR) is always properly setup and initialized to the platform default
values.
Perform all FPU-related setup in the Cpu class' init_fpu function instead of
the general system bring-up assembly code.
Set all required control register 0 and 4 flags according to Intel SDM Vol. 3A,
sections 9.2 and 9.6 instead of only enabling FPU error reporting and OSFXSR.
