Create a generic interface for x86 virtualization.
Split the VMCB data structure in `Vmcb_buf` to represent the physical
VMCB page and `VMCB` as a control interface.
Issue #5113
So far, the VMCB data structure was generated from it's parts (most
prominently VMCB Control Area and VMCB State Save Area) with the VMCB Control
Area accessed via the Mmio framework, while the VMCB State Save Area
struct used directly defined members.
Unify the VMCB structure and uniformly use the Mmio framework to access
the VMCB. Separate the controlling structure from the VMCB page.
Issue #5113
The SVM implementation did not lend itself to a runtime selection of the
x86 virtualization technology.
Encapsulate functionality in the VMCB class to facilitate adding support
for Intel's VMX.
Issue #5113
The initial algorithm ported to hw seems to be correct in principle,
however it does not work with nested virtualization.
Clean up the code to make the different methods of obtaining the TSC
frequencies more clear, and add warnings if a particular
method has failed although it should be available.
Fixes#5210
for other VMMs beside Virtualbox, e.g. Seoul or potentially arm/vmm. The
webcam model depends on libyuv, which uses stdcxx + full libc, which is not
desired or required for all VMM implementations.
Fixes#5208
We discovered this relocation, which does nothing, in pre-compiled
libraries. It is easy to implement because it has the same
relocation-type number (0) for all supported ABIs.
Also adjust error message from "Unsupported PLT relocation" to
"Unsupported translation table address format" to not confuse the
relocation type with the translation table type.
Fixes#5209
During resume the waiting for Cmd::St takes ~2s on a T460p with Intel
AHCI SSD attached. According to the Serial ATA AHCI Spec. wakeup can take
seconds, e.g. chapter 8.2 Power State Mappings of the Serial ATA AHCI spec
(1.3.1).
Issue #5203
Restore the reporting in situations where all capture sessions are gone.
This fixes the webcam package that disables the USB webcam driver when
nitpicker report no active displays.
Issue #5187
- Avoid geometry animation at boot time
- Assign CPU quantum to higher prioritized GUI components
- Defer touch_keyboard start to reduce boot time
Issue #5174
Instead of using one default policy when creating an mmc driver's
configuration, produce some more static policy items to support
boards with more than one card per driver (mnt_reform2).
Both keys are physically the same on available keyboards (with varying
labeling). Unfortunately, PS/2 scancode sets and USB HID spec seem to
differ slightly in their interpretation. Therefore, we keep the
driver-level reporting as is but report both as KEY_PRINT in Sculpt,
which allows to use the key(s) for screenshoter rules most prominently.
Also, unify sculpt/event_filter/pc with sculpt_manager.
The run tool overrides the 'exit'-procedure to make sure that a loaded
run_power_off procedure is always executed. However, a failing
run_power_off lead to false-positives: 'make run/...' exited with 0 even
tough the run script was not even executed because of a failed
power-on/off cycle. In this case, if the run_power_off is the exit code
producer, the new exit definition does not finish as intended. As a
result, the first exit code is re-written, and errors are not propagated
accordingly.
The solution is to catch possible errors from power-off within the exit
procedure.
Fixes genodelabs#5102
With the current RAM setting, opening the inspect window fails on a
display with 4K resolution.
Adjust the inspect window's RAM quota to make it work.
Issue #5174
When a new signal arrives, which means a formerly non-pending one,
we should ignore old signal numbers of that context, but only
evaluate newly received data by the last kernel-call.
Fix#5193
The ported i2c_hid driver contains driver code for the "Intel
Tigerlake/Alderlake PCH pinctrl/GPIO" device. Unfortunately, acpica
driver also accesses the same device on Lid open/close via ACPI AML code
of the DSDT table to read out the state of a GPIO pin connected to the
notebook lid. This would fail as I/O memory is handed out only once and
cannot be shared. The workaround disables the region check for the
specified GPIO I/O memory regions and provides both drivers shared
access to the regions.
This is a preliminary workaround. A general solution should separate the
GPIO driver into a component (e.g., platform driver) that regulates
accesses by i2c_hid and acpica.
Issue #5195
During audio and video playback at a high rate by a VMM, nitpicker on the
boot CPU may interfere with the mixer clients, letting them not finish the
schedule RPC at the mixer in time. Moving nitpicker to the same CPU as
leitzentral mitigates the effect at moment.
Issue genodelabs/genode#5174
At least on x86_64/x86_64/pc/hw|nova, the test used to fail because the net
setup sometimes required more than the 3 seconds that the test was giving each
step. This commit raises the step timeout to 5 seconds and the test timeout
from 70 to 90 seconds in order to be on the safe side.
Ref #5192
The default mixer launcher limits the volume to 50%, so raise the
driver's volume to the max to be audible on certain systems where
otherwise audio is barely recognizable.
While there, fix the wrong reporting attribute as well.
Issue #5174.
