Selecting an alternate interface setting, even if it is the same as the
current one, apparently makes the INQUIRY command fail with USB devices
like 'SanDisk Ultra Fit' (0781:5583) and 'Corsair Flash Voyager'
(1b1c:1a03) when the USB block driver is restarted.
Fixes#2860
* Catch Quota_guard exceptions wherever we do 'new (_alloc)' in Interface
and in case drop the packet that caused the exception
* Modify Interface::handle_config_2 to not use the guarded allocator of the
NIC session quota as we cannot handle a RAM exhaustion well at this point
in time. Instead use a Constructible member in Interface so that a needed
RAM adds up to the calculation in the create_session implementation where
an exhaustion is handled via a service denial.
Issue #2857
The interface destructor called pure virtual methods at least when
cancelling ARP- waiting states. The implementations were made by the
deriving classes Session_component respectively Uplink. This led to an
abort of the NIC router as the destruction of the derived class was
already done. A similar problem already occured in the past during the
construction of Interface and was back then solved by introducing a
separate init() method. This commit, however, solved the problem by
making Interface a member of the other classes. Therefore, the init()
method could be removed again. Furthermore, the interface polica could be
moved from Session_component_base to Session_component. The commit also
had to generalize the way the link state of an interface is determined.
Fixes#2856
With this patch, the sculpt manager takes over the role the window
layouter of the leitzentrale, which eliminates the need to manually
position and size the inspect window.
While a child is abandoned, we must limit the start of anothers with
the same name. Otherwise - of the child has startup problems - a number
of abandoned children with the same name may queue up. This becomes a
problem whenever the child destruction depends on an asynchronous
service that provides an env session for the children. If the service is
unable to keep up with the session requests (both create and close),
the queue of abandoned children becomes unbounded. Limiting the child
creation rate to one abandoned child per name mitigates this problem.
This patch reduces the latency of state reports when children are
removed or added, thereby, accellerating the feedback loop between a
management component and init during the staged startup or removal of
inter-dependent components.
Whenever an environment session was provided by an asynchronous service,
e.g., the depot_rom of the sculpt scenario, the session quota was not
transferred to the server at session-creation time. This resulted in a
slow depletion of the server's quota over time. This patch ensures that
the delivery of session quota is consistent with the information
reported to the server as session argument.
The 'Child::_revert_quota_and_destroy' assumes to be called from the
client's context, which is normally the case when destroying sessions.
However, if a client's session outlives the client (because the
asynchronous close request to the server is still pending), the session
cleanup is performed in the context of the server. Here, the
'session_response' implementation wrongly called
'_revert_quota_and_destroy' to the effect that the session quota was
withdrawn from the server (good) but subsequently transferred back to
the server (bad). The patch replaces the call of
'_revert_quota_and_destroy' with only the first - correct - part of the
transaction.
This test monitors the RAM quota of a dynamic init and a server hosted
within the dynamic init in the presence of a repeatedly created and
destructed client.
Newer revisions of parted require special privileges due to use of the
dmidecode tool, which logs permission errors to standard error. In these
cases parted still succeeds with its operation, so just ignore the
jabbering and prevent expect to exit.
Previously we were doing the initialization once over all domains,
remembered which of them became invalid and destroyed those afterwards.
This isn't sufficient. As soon as one domain becomes invalid we have to
dissolve/destroy this one, deinitialize all other domains again (as they
could contain references to the invalid domain) and retry to initialize
them from the beginning. We proceed with this until we have one run
without a domain becoming invalid. Then we can be sure that the last
initialization run did not create references to any invalid domain.
Issue #2840
The generic helper Avl_string_tree of the NIC router is currently only
used for finding domains via their names, but in the future it can be
used for finding uplinks by their labels also. Additionally, it enables
us to throw an exception when inserting two elements with the same
identifier.
Issue #2840
This patch suppresses the start of components that cannot run because
obvious runtime dependencies (used servers) are missing in the runtime.
In this situation, the sculpt manager gives diagnostic feedback to the
user in the runtime dialog.
* Get rid of the base classes Rule and Leaf_rule,
* Make log output about initiated or invalid routing rules conform to the rest
of the router log, and
* Ensure that each type of routing rule when being invalid invalidates its
whole domain.
Issue #2840
On Linux, we have a tap device as NIC back end but there is no one to
ping to in the subnet of the tap device. On FOC, the tests seem to trigger
a bug in the destruction of components with parent.exit(X); .
Fixes#2848
Sculpt's discovery of the default storage target can be intercepted by
user input (i.e., pointer movements) at boot time. The patch makes this
intervention mechanism robust for the case where nitpicker's first hover
report arrives after all storage devices were already scanned.
By tracking the states for an interactive selected NIC target (managed)
and a manual-defined NIC target (config/nic_router) separately, the
sculpt manager becames able to present the user with the ability to
interactively disable and re-enable a manually-managed network
configuration.
The sculpt manager wrongly paid for the nitpicker session of the fader
out of its own pocket. This patch reduces the quota transfer to the
amount provided the fader.
When updating the GPT to match the underlying block device, the
protective MBR will normally also be updated. In case a hybrid MBR is
used, as is done if 'image/disk' is specified, setting the
'preserve_hybrid' flag will prevent the component from overriding the
MBR.
The condition was too rigid. In the case where no motion occurred in
between the press and release events of the magic button, the delayed
press event would not be delivered. This - in turn - confused other
components (like nitpicker) down the input chain.
for such classes where it should be safe and where we have seen issues.
Disabling in general bus master DMA causes on some machines hard hangs, e.g.
because the USB handover protocol was violated.
Fixes#2835
In contrast to most information of init's state reports, which can be
monitored at a relatively low rate (like 2 seconds in Sculpt's runtime),
resource requests call for an immediate response by the consumer of the
report. Otherwise the requesting child stays unnecessarily blocked until
the next rate-limited state report is due. This patch adds a fast lane
for such low-latency state updates to init.
- support saving of files with no file name extension
- make the the "All Files (*)" file selection filter the default to see
configuration files immediately
Fixes#2844
