Link the EGL library with Mesa. SDL's `GL_GetProcAddress` now calls
`eglGetProcAddress` rather than lookup procedures directly in the Mesa
library.
Components may still wish to list 'mesa_api' in LIBS to access OpenGL
headers.
Fix#2711
This prevents diagnostic messages like
Error: partial write detected 0 vs 31
for writes into already released socket directories due to a still-open
handle to the socket data file.
Remove the dependency on the deprecated LwIP libary.
Remove the progress logging callback. Should a progress indicator be
desired, a progress report would be more appropriate.
Fix#2684
This patch removes the notion of partial writes from the file-system
servers. Since write operations are asynchronously submitted, they are
expected to succeed completely, except for I/O errors. I/O errors are
propagated with the write acknowledgement but those are usually handled
out of band at the client side. Partial writes must never occur because
they would go undetected by clients, which usually don't wait for the
completion of each single write operation.
Until now, most file-system servers returned the number of written bytes
in the acknowledgement packet. If a server managed to write a part of
the request only, it issued the acknowledgement immediately where it
should have cared about writing the remaining part first.
The patch detects such misbehaving server-side code. If partial writes
unexpectedly occur, it prints a message and leaves the corresponding
request unacknowdleged.
Issue #2672
Instead of having a lot of platform specific quirks in the run test,
and to also test it on platforms currently missing a NIC driver,
this commit removes hardware drivers from the nic_router and
nic_bridge run scripts, and uses the nic_loopback server instead.
The new 'verify' component facilitates the code of GnuPG to verify
detached OpenPGP signatures against public keys.
Since GnuPG depends on libgcrypt and libgpg-error, the patch adds these
libraries to the libports repository.
Fixes#2640
The TCP window scaling is implemented for servers (like netperf's
netserver) only. The client implementation just uses the lower 16 bits
of the TCP_WND configuration value, which we therefore maximize to ~64K.
This is a follow-up commit to "Increase default warning level", which
overrides Genode's new default warning level for targets contained in
higher-level repositories. By explicitly whitelisting all those targets,
we can selectively adjust them to the new strictness over time - by
looking out for 'CC_CXX_WARN_STRICT' in the target description files.
Issue #465
The patch adjust the code of the base, base-<kernel>, and os repository.
To adapt existing components to fix violations of the best practices
suggested by "Effective C++" as reported by the -Weffc++ compiler
argument. The changes follow the patterns outlined below:
* A class with virtual functions can no longer publicly inherit base
classed without a vtable. The inherited object may either be moved
to a member variable, or inherited privately. The latter would be
used for classes that inherit 'List::Element' or 'Avl_node'. In order
to enable the 'List' and 'Avl_tree' to access the meta data, the
'List' must become a friend.
* Instead of adding a virtual destructor to abstract base classes,
we inherit the new 'Interface' class, which contains a virtual
destructor. This way, single-line abstract base classes can stay
as compact as they are now. The 'Interface' utility resides in
base/include/util/interface.h.
* With the new warnings enabled, all member variables must be explicitly
initialized. Basic types may be initialized with '='. All other types
are initialized with braces '{ ... }' or as class initializers. If
basic types and non-basic types appear in a row, it is nice to only
use the brace syntax (also for basic types) and align the braces.
* If a class contains pointers as members, it must now also provide a
copy constructor and assignment operator. In the most cases, one
would make them private, effectively disallowing the objects to be
copied. Unfortunately, this warning cannot be fixed be inheriting
our existing 'Noncopyable' class (the compiler fails to detect that
the inheriting class cannot be copied and still gives the error).
For now, we have to manually add declarations for both the copy
constructor and assignment operator as private class members. Those
declarations should be prepended with a comment like this:
/*
* Noncopyable
*/
Thread(Thread const &);
Thread &operator = (Thread const &);
In the future, we should revisit these places and try to replace
the pointers with references. In the presence of at least one
reference member, the compiler would no longer implicitly generate
a copy constructor. So we could remove the manual declaration.
Issue #465
Stdin, stdout, and stderr are mapped to descriptors 0, 1, and 2
respectively. If these first three descriptors are not allocated before
the application becomes active then normal files and sockets can be
opened under these numbers, potentially causing unexpected application
behavior.
Fix#2628
This patch makes the creation of the libc's timer session depend on
whether or not the 'rtc' attribute of the <libc> configuration is
defined. If not configured, 'clock_gettime' returns 0.
Fixes#2625
The NIC router can now be configured to periodically send reports.
Configuration example (shows default values):
<config>
<report interval_sec="5" bytes="yes" config="yes">
</config>
If the 'report' tag is not available, no reports are send.
The attributes of the 'report' tag:
'bytes' : Boolean : Whether to report sent bytes and received bytes per
domain
'config' : Boolean : Whether to report ipv4 interface and gateway per
domain
'interval_sec' : 1..3600 : Interval of sending reports in seconds
Issue #2614
Avoid that the user has to define the number of HTTP/UDP clients manually.
This count is used by the run scripts to generate the expected log output.
Fix#2609
Previously, the function that returned the XML config for a network test
client/server in the scripts formed the component name of the peer solely
by combining the protocol name, "client" or "server", and a suffix that
is given as argument. However, to group multiple clients together in one
domain via their session label at the NIC router we want peers with the same
name prefix. Thus, the function now simply takes the whole name as argument.
Issue #2609
When this flag is set in the config tag, the NIC router will print a
short information to the log for each general state change of a domain.
This includes currently the IP-configuration state and the number of
connected NIC sessions. This a useful addition as the normal verbose
flag's purpose is a very deep insight into almost every activity in the
router, which is cool for debugging sophisticated problems but normally
floods the log and therefore discards this option for, e.g., desktop
systems. In such systems, the new verbosity is pretty discreet but
already gives a good hint on why packets may get dropped by the router
although the routing rules are correct.
Issue #2534
Replace former rtt_sec attribute of the <config> tag by more specific
(and still optional) attributes for timeouts used in the NIC router
(these are also the default values):
<config dhcp_discover_timeout_sec="10"
dhcp_request_timeout_sec="10"
dhcp_offer_timeout_sec="10"
udp_idle_timeout_sec="30"
tcp_idle_timeout_sec="600"
tcp_max_segm_lifetime_sec="30">
Details about the new attributes can be found in the README of the router.
Issue #2590
In case the video geometry (WxH) is larger than the current size of
the framebuffer, match its size and let libav do the scaling. This
enables the playback of 1080p movies on smaller screens.
Issue #2583.
The synchronization with the ACPI driver is not needed when starting
acpica at a later stage. It could already be disabled via the
'acpi_ready="yes"' config attribute. However, acpica still
unconditionally requests the so-called "Acpi" service, which is an
alias for the platform_drv's "Platform" service. This patch disables the
use of this alias when the 'acpi_ready' synchronization is disabled.
The debug version comes with an unwelcome libc dependency, which is
solely needed for the formatted output of error messages. Since the
distinction between the regular and the debug versions remained unused
in practice, this patch removes the debug version.
This makes '/' and the actual root of VFS distinguishable. A VFS root
may contain one ore more '/' entries for each file system. 'opendir' for
the VFS root opens all file systems via 'open_composite_dir', while
'opendir' for '/' only returns a VFS handle.
Fixes#2569
Currently, LxIP peers need a lot of RAM (the simple test-client/server for the
nic_router test need at least 28 MB per component). As the nic_router test
previously used 6 instances of such components and a lot of other components,
it had issues with insufficient RAM on some platforms. By using two new
LwIP-based UDP tests instead, we save more than 100 MB.
Ref #2543
Do not use two times the RTT for the lifetime of links but use it as
it is configured to simplify the usage of the router. Internally, use
Microseconds/Duration type instead of plain integers.
Ref #2490
The remote shell facilities are past deprecation and there is an
obligation to prevent their use rather than to support them. This patch
removes the related function definitions from 'unistd.h', which have not
been been included in the Genode libc ABI regardless.
Fix#2530
Remove getaddrinfo and freeaddrinfo from the Libc::Plugin and get rid of
the extra libc_resolv library. Remove getaddrinfo/freeaddrinfo symbol
hiding patch for FreeBSD sources. Remove libc_resolv from Makefiles and
run scenarios.
Fix#2273
This recipe copies the entire stdcxx library into the API archive, which
is an interim solution until we introduce a proper ABI for stdcxx. With
this current version, every user of the stdcxx ABI will implicitly build
the stdcxx library.
The timer driver should always be of the highest priority to avoid
problem with timers that have low max-counter values like the PIT
with only 53 ms.
Ref #2400
