This patch fixes the corner case where the keyboard focus is defined
independently from user interactivity, e.g., the activation of a
screensaver or lock screen.
In this case, nitpicker would update its internal focus state not before
the next input event is handled. Should this input event be a press
event, this event would wrongly be delivered to the prior focused
session. Another problematic situation is the initial state before the
very first input event occurs. Since the focus remains undefined until
the first input event is handled, an initial key press event would not
be delivered.
This is a regression caused be the transition to the event-session
interface and the removal of the nitpicker's periodic way of operation.
The patch fixes the problem by applying pending focus changes not only
at the input processing but also on the code path that responds to focus
changes (e.g., focus-rom update).
Issue #3812
Adjust the base-* platforms to acknowledge new thread location solely if
migration is supported and succeeded. Otherwise the wrong thread
locations are observed via the trace session and utilization time calculation
get wrong.
Issue #3842
Instead of using the old 'ioctl' Vfs::File_io_services API implement
the I/O control functionality in a buch of files. This is similar to
the terminal-VFS plugin.
Fixes#3889.
Like already done for terminal I/O controls use collect the information
by reading property files instead of using the old VFS ioctl interface.
Fixes#3888.
There is a type mismatch as in the FreeBSD contrib code the type of the
request is 'unsigned long'. So far, only I/O controls where the request
falls into the signed range where used and this was not a problem.
Some of the SNDCTL requests, however, have the bit set.
Fixes#3887.
This patch is a follow-up for the commit "libc: use monitor for fork".
It removes the use of the monitor mechanism from the
'Local_clone_service::close' RPC function because the fork_ep must stay
responsive for the destruction and creation of 'Child' objects.
Issue #3874
The current version of the driver leaves the screen in a black state
after a mode change, e.g., when connecting an external display.
With this patch, the framebuffer content is fetched for the entire
screen after a mode change. Thanks to Sebastian Sumpf for investigating.
Issue #3878
- Show "..." for resource-assignment menu entry because it leads
to a sub menu.
- Avoid dialog changes when clicking on "Add component" while a
routing or resource dialog is unfolded.
The initial implementation of the affinity configuration in
"depot_deploy: support affinity configuration" added the affinity
location attributes to the <start> node of the deploy config. This patch
moves the information into a dedicated <affinity> sub node as done by
the init configuration. So the context of the attributes 'xpos', 'ypos',
'width' and 'height' becomes clear.
It also fixes a usability issue in Sculpt that occurred during testing:
When configuring multiple components with custom affinities, the
resources dialog of later components would wrongly display the state of
earlier components instead of displaying the fresh (default) state. The
resulting configuration would then not match the displayed information.
This is fixed by resetting the dialog state.
As another minor cosmetic change, the patch adds a line break in front
of copied <config> or <heartbeat> nodes.
Issue #3597
The combination of Net::Mac_address and
Genode::ascii_to(Net::Mac_address) required shaky quirks in several
places because GCC is not able to resolve the ascii_to overload if
base/xml_node.h was included to early. The current solution moves the
several ascii_to overloads "closer" to the Net types by putting them
into the Net namespace, where GCC reliably picks them up.
Hence, co-locating the ascii_to() utility with the overload type in the
same scope/namespace is good practice.
This patch removes the now obsolete <nic/xml_node.h> header file.
With the move of the storage-management dialogs to the graph in Sculpt
version 20.02, the ability to unselect the buttons for destructive
storage operations such as format or expand disappeared. This patch
restores the original behavior.
* On this platform there is no need to zero out the framebuffer
dataspace, which is already blanked by core
* But it might happen that the GUI server is sending a capture
event before the zero out happens. Thereby screen content can get
lost
Fix#3878
* Fixes faulty algorithm in fractional pll rate calculation
* Enables clocks that are set as reference clock to prevent system freeze
* Enables/disables root clocks of gates implicitely
Fix#3876
By default, bash brings its own version of 'getenv', named exactly like
the libc function. This becomes a problem in fork/execve scenarios if
the dynamic linker resolves 'getenv' to the bash binary instead of the
libc.
This patch fixes the generate step of the genodians.org scenario.
Issue #3882
This patch enables the menu view's new ability to respond to font-size
changes in Sculpt so that the menu view instanced no longer need to be
restarted whenever the screen resolution or font size is changed.
Fixes#3875
This patch allows the use of the VFS watch mechanism for the glyph file
of the TTF VFS plugin so that clients become able to dynamically respond
to font reconfigurations.
Issue #3875
This is needed to enable VFS plugins to notify VFS clients about file
changes that depend on the plugin configuration, E.g., whenever the vfs_ttf
plugin responds to a font-size change, it generates a watch notification
for the glyphs file. Since the change is independent from I/O, we need
to manually call 'handle_io_progress'.
By default, Vim renames a written file to a backup file suffixed with
"~" before writing the current buffer to a new file. Consequently, there
exists an intermediate state when no file exists. Should a client watch
such a file to obtain dynamic configuration info, it observes the empty
state.
Some components have builtin heuristics for such a situation. In
particular, the window layouter falls back to a predefined default
'rules' if no rules are provided as a file. So when interactively
editing window-layouter rules using Vim, it can happen that the manually
maintained rules get overwritten by the default rules.
By setting 'set nowritebackup', we can sidestep this issue by preventing
Vim from producing the bad intermediate state.
With the change of nitpicker to the event session interface, the
formerly periodic hovering updates moved to the - now sporadic - input
processing. This has the unfortunate side effect that hovering changes
caused by non-user-input, in particular view-stack changes issued by the
GUI clients that change the view under the current pointer position,
would no longer be reported immediately but only after receiving the
next incoming input event.
This patch reworks the hover handling such that potential hovering
changes due to view-stack operations are evaluated immediately by
those operations, covering the update of the hover report and the
generation of artificial enter/motion events.
Issue #3812
This patch solves a corner case where one long-active job (e.g.,
read-ready request) stays at the beginning of the '_active_jobs' queue
without an ack. In this case, the '_try_acknowledge_jobs' method would
wrongly stop processing the subsequent acknowledgements. In practice,
this can lead to a delayed sending of acknowledgements until new I/O or
client requests occur. In particular, Vim in Sculpt's inspect window
sometimes did not immediately respond to key presses during tab
completion. Here, the read-ready request of the terminal prevented the
acknowledgement for read of directory entry from being delivered until
the next key was pressed.
Fixes#3873
The quota for the argument buffer is already accounted by using the
Attached_ram_dataspace _argument_buffer, which uses the Constraint_ram_allocator
_ram, which uses the Ram_quota_guard from the Session_object. Running on
Sculpt with more than 1000 Subject_info objects/trace IDs the memory
waste become noticeable.
Follow-up commit to fix the old usb_drv. Under rpi one and the
same irq can be requested several times. Therefore, we've to track
the Irq_connection objects.
Ref #3865
The Lx_kit::Irq abstraction of DDE Linux was always using the very first
interrupt of a Platform::Device stored in it. Instead of handing over the
platform device it is much more flexible and sane to hand over the actual
interrupt capability.
Ref #3865
By now, the enumeration of peripheral interrupts on Raspberry Pi 1 was
different in between base-hw kernel and Fiasco.OC. Therefore, hacks were
needed in every driver to request the correct interrupt number dependent
on the kernel. Before reproducing the same in the platform driver for rpi,
we can more easily use the same enumeration with base-hw.
Ref #3864
This is a temporary workaround to not harm drivers, which aren't
converted yet to request all device resources including power and
clocks from this new platform driver.
Ref #3863
To access the ARM Trusted Firmware from the platform driver
fill the new `managing_system` call of the PD session with life resp.
do a SMC call on behalf of the client.
Fix#3816
Introduce the managing_system privilege for components like the
platform_driver to allow it to call system management functionality
that is reserved by kernel or special firmware, e.g., ARM Trusted Firmware.
The former RAM resource configuration attribute `constrain_phys`,
which enabled to constrain the region of physical RAM to be used,
gets replaced by the new, broader managing_system configuration
attribute of a `start` node. It gets enforced by the sandbox library.
Ref #3816
Normally CLOCK_REALTIME is used. However libraries, like glib, want to
use CLOCK_MONOTONIC. To make those users happy add setting the clock.
Note, the pthread_cond implementation uses the POSIX semaphore API
internally that does not have means to set the clock. For this reason,
the private 'sem_set_clock' function is introduced.
Fixes#3846.
When the 'raw' attribute is set to 'yes' the terminal VFS plugin will
ignore control characters. This in necessary for terminal connections
that transport data that contain such characters as part of message.
Fixes#3860.
The driver wrongly rejected a block request for the very last block of
the device, which prevented part_block from successfully parsing the
partition table (when attempting to access the GPT backup).
Fixes#3861
With this patch, sculpt uses init's heartbeat-monitoring mechanism to
detect the failure of part_block instances during storage disovery.
If part_block gets stuck, the device is released and can thereby
be accessed at the whole-device level.
Issue #3861
The patches disable VBOX_IGNORE_FLUSH and a sanity check in the VMDK
backend. This enables passing an explicit flush request by the guest
down to the VFS.
Fixes#3743.
The check prevents the Ttf_font from violating the bounding box in the
presence of very small scale values. This can happen during the startup
of Sculpt. Before the framebuffer driver is up, Sculpt bases its dynamic
font-size setting on a screen resolution of 1x1.
Issue #3812
* add libsparkcrypto source-recipe
* provide ALI files through a new repository by mstein and add the repo
download to the libsparcrypto port-file
* remove dependencies to non-existent contrib ADB files from the library make
files
Fixes: #3852
The sculpt manager used to defer the initialization of the GUI until
nitpicker's first display report became ready. This way, Sculpt was able
to run headlessly even if the framebuffer driver failed to start up.
Thanks to #3827, nitpicker no longer depends on a working framebuffer
driver. So the sculpt manager is safe to rely on nitpicker in any case,
simplifying the code.
Issue #3827
This is a follow-up commit to "nitpicker: make framebuffer and input
optional". It restores the dynamic mode-change support when using
'request_framebuffer="yes"' as needed in scenarios where multiple
nitpicker instances are used in a cascaded way. E.g., Sculpt's
Leitzentrale. The previous version missed to reconstruct the
'_fb_screen' on mode changes.
Issue #3812
This patch untangles the dependency of VFS operations that need RTC
information from the 'clock_gettime' libc function that must never be
called from the libc kernel context.
- The 'Rtc' class uses the VFS directly for reading the rtc file instead
of relying on libc functions.
- The 'Rtc' instance has become part of the 'Kernel' instead of
being construced as a side effect of the first call of
'clock_gettime'.
- Changed 'Rtc::read' to return a timespec value, which has a higher
precision than the formerly used time_t value.
- The 'Rtc::read' returns a value with the relative 'current_time'
already applied. The former handling of subsequent rtc-value
updates has been rewritten to become more logical.
- The 'Vfs_plugin' no longer calls 'clock_gettime' but the new
kernel-level 'Current_real_time' interface.
Issue #2635
This patch untangles the interplay of the base library and the libc
during the exit handling.
- The CXA ABI for the atexit handling is now provided by the libc.
For plain Genode components without libc dependency, __cxa_atexit
is a no-op, which is consistent with Genode's notion of components.
- The 'abort' implementation of the base library no longer calls
'genode_exit' but merely 'sleep_forever'. This way, the cxx library
no longer depends on a 'genode_exit' implementation.
- The libc provides 'atexit' support by storing metadata on the
libc kernel's heap now, thereby eliminating the former bounded
maximum number of atexit handlers.
- Shared-library dtors are no longer called via the atexit mechanism
by explicitly by the dynamic linker. This slightly changes the
call order of destructors (adjustment of the ldso test). Functions
marked as destructors are called after the atexit handlers now.
- The libc executes atexit handlers in the application context,
which supports the I/O operations in those handles, in particular
the closing of file descriptors.
Fixes#3851
For the time being, we put all spec and body files into the recipe although
there might be a (so far to us unknown) way to have only the API relevant files
in it.
Fixes#3849
* switch to a libsparkcrypto fork of m-stein
* switch to a libsparkcrypto state that makes some units pure that are used by
the consistent block encrypter, in order that the latter can become
completely pure
Ref #3849
* switch to fork of the Ada runtime provided by m-stein
* switch to a Ada-runtime state that provides the Exp_Int package (exponential
function on integers)
* adapt spark lib, symbols, and recipes to incorporate the Exp_Int package
Fixes#3848
* enable all common warnings through default value of CC_ADA_WARN
* treat warnings like errors through default value of CC_ADA_WARN_STRICT
* enable almost all style checks through default value of CC_ADA_WARN_STRICT
* style fixes for aes_cbc_4k
* disable strict warnings and style checks for libsparkcrypto and spark lib
Ref #3848
This patch prevents nitpicker from requesting a framebuffer and input
session by default because the regular use of nitpicker relies on the
capture-session and event-session interfaces by now.
For supporting the nested use of nitpicker via the gui_fb component, it
is still possible to enable the traditional behavior by explicitely
setting the 'request_input' and 'request_framebuffer' config attributes
to "yes".
Issue #3812
This remove the call to Io_progress_handler::handle_io_progress() from
wait_and_dispatch_one_io_signal() to prevent unexpected nesting
I/O-progress handling in case of custom dispatch loops (e.g., in libc).
The original intention of Io_progress_handler was to inform the
entrypoint just before blocking in the entrypoint loop.
Issue #2635
This commit applies the transition from the "Input" session to the "Event"
session to the event-filtering mechansim. The functionality of the
input_filter is now provided by the event_filter. The event filter
requests only one "Event" session as destination for the filter result,
which is usually routed to the nitpicker GUI server. It provides an
"Event" service to which any number of event sources can connect.
The configuration of the filter chain remains almost the same. Only the
declaration of the <input> nodes is no longer needed. Instead, the
configuration must specify <policy> nodes, which define the mapping of
"Event" clients (event sources) to the inputs used in the filter chain.
The patch adjusts all uses of the nitpicker GUI server accordingly such
that the event filter reports events to nitpicker's event service
instead of having nitpicker request an "Input" session. This dissolves
the dependency of nitpicker from input drivers.
Issue #3827
This patch brings the input filter into a shape that is easier to
re-mold into an event filter, reversing the client/server roles of
the component.
* The 'Sink &destination' is no longer passed as constructor argument
to the individual filters but passed as argument to the 'generate'
method. This way, the final destination does not need to exist at
the construction time of the filter chain but can be created on
the fly (clearing the way for using 'Event::Client::with_batch').
* A new 'Source::Filter' interface with the 'apply' method aids the
cascading of filters during 'generate'. The modules now implement
the 'Source::Filter::filter_event' interface instead of the
'Source::Sink::submit_event' interface.
* Since the 'Sink &destination' is no longer a member of the filter
modules, character-repeat events can no longer be emitted in an
ad-hoc way. Instead, the character-repeat mechanism now invokes
a new 'Trigger::trigger_generate' hook that prompts the execution
of the regular 'generate' mechanism by the main program.
This patch is supposed to leave the semantics of the input filter
unchanged (validated by the input_filter.run script).
Issue #3827
This is an intermediate helper component for the transition of input
servers into event clients. It works analogously to the
input_event_bridge but it connects servers instead of clients.
In particular, it can act as glue between a traditional input driver
that provides an input service and the event filter that provides an
event service. Thanks to this component, each driver can be migrated to
the event-client interface individually.
Issue #3827
- base/cancelable_lock.h becomes base/lock.h
- all members become private within base/lock.h
- solely Mutex and Blockade are friends to use base/lock.h
Fixes#3819
This patch replaces the use of the "Framebuffer" session interface by
the new "Capture" session interface in all framebuffer drivers. Thanks
to this change, those drivers have become mere clients of the nitpicker
GUI server now, and are no longer critical for the liveliness of the GUI
server.
The patch touches the following areas:
- The actual driver components. The new versions of all drivers have
been tested on the respective hardware. Generally, the drivers
have become simpler.
- The drivers_interactive packages for various boards. The drivers
subsystem no longer provides a "Framebuffer" service but needs a
valid route to the "Capture" service provided by nitpicker.
- The driver manager of Sculpt OS.
- This patch changes the role of the test-framebuffer component from a
framebuffer client to a capture server so that drivers (capture clients)
can be directly connected to the test component without the nitpicker
server.
- Framebuffer driver no longer support the unbuffered mode.
- The fb_bench.run script is no longer very meaningful because it
interplays solely with nitpicker, not with the driver directly.
- All run scripts for graphical scenarios and the related depot
archives got adapted to the change.
Fixes#3813
This patch replaces meta-data allocation during the resize handling by a
new 'Resizeable_texture' type that has all meta data preallocated.
It also replaces the use of pointer return values with the
'Resizeable_texture::with_texture' method.
Issue #3812
Nitpicker used to unconditionally request a framebuffer and input
session. With the transition to the new capture/event session
interfaces, this built-in policy does no longer suffice.
This patch introduces the attributes 'request_framebuffer="yes"' and
'request_input="yes"' (with the default values shown) to nitpicker's
<config> node. If setting those attributes to "no", nitpicker won't
request a "Framebuffer" and "Input" session respectively.
Issue #3812
In the presence of potentially multiple output back ends, this
dirty_rect state must be maintained individually per back end. Instead
of storing the dirty_rect as view-stack member, the view stack now calls
a new 'Damage::mark_as_damaged' interface, which allows nitpicker to
propagate this information to multiple back ends. Unfortunately, the
patch must remove the per-view dirty_rect state.
Issue #3812
This patch simplifies the internal naming of the nitpicker GUI server as
a preparatory step for adding support for the capture session interface.
Issue #3812
_timestamp() returns CPU local values which may not be in sync with _ts
taken from another CPU. Be robust and don't produce wraparound/negative
timeout values.
Issue #3657
* Differentiate in between different architectures with assembler routines
for correct measures
* Automate first step measuring of 10G bogomips across different hardware
Fix#3785
Until now, Genode's framebuffer session interface was based on the
RGB565 pixel format. This patch changes the pixel format to 32-bit
XRGB where the X part is ignored. It adapts all graphical applications
and device drivers accordingly.
The patch also adjusts the users of the drivers_interactive packages,
assigning 64 MiB RAM and 1500 caps to the drivers subsystem, which is
sufficient for covering high resolutions at 32 bits per pixel and to
accommodate multi-component USB HID input stacks.
Fixes#3784
The 'vfs_block' component will give access to a VFS file through a
Block session. For more detailed information please look at its
README.
(On a technical note, the server currently only allows for one
active session and has only one pending back end request but can
easily be extended in the future.)
Fixes#3781.
Setting the 'size' attribute will restrict a reader to consume
0s up to the specified amount per VFS handle. The attribute is
parsed as 'Number_of_bytes', which will limit the amount to the
maximum of the addressable memory on the platform.
This addition comes in handy when needing to provide a synthetic
empty file with a fixed size.
Issue #3781.
So far the condition whether to spawn a new job or not depended on
the amount of data already processed. This could lead to spawning
more jobs than necessary if batching is used and in return could
result in creating invalid requests in case the tested block session
is not large enough.
In addition to checking the amount of data the test now stores the
number of the last block and checks if the current request is in
range. This properly limits the total amount of requests.
Issue #3781.
The seek offset has to be updated on partial writes according to the
current write position. Otherwise writes will override the content
at the initial offset.
Fixes#3780.
This commit fixes the 'Out_of_caps' handling. The previous version
mistakenly upgraded the RAM instead the caps as response. The problem
could be triggered by the 'decorator_stress.run' script.
The blit API archive missed the CPU-architecture-specific variants of
the blit library such that all depot binaries worked with the generic
(slow) fallback implementation. This patch adds the missing pieces to
the blit API archive.
Up to now all pthreads get placed on one CPU.
The patch adds support to evaluate a libc pthread configuration specifying
a placement strategy.
The default strategy is now to use all available CPUs as imposed by Genode's
affinity configuration for the pthread application.
The old behaviour, putting all pthreads on one single cpu can be still
configured by:
<libc>
<pthread placement="single-cpu"/>
...
</libc>
Fixes#3775
To enable logging of ROM session deliveries, set the "diag" on
session routes:
<route>
<service name="ROM" label_prefix="/bin/">
<child name="cached_fs_rom" diag="yes"/>
</service>
…
<route>
Fix#3772
Make the framebuffer driver for pl11x chipsets,
the ps2 input driver for pl050, and the lan9116 NIC driver independent from
the pbxa9 board by using the newly introduced common ARM platform driver API.
Ref #3299
* Remove input driver specific to i.MX53 tablet board from QSB driver pkg
* Move GPIO settings for QSB LVDS backlight out of framebuffer driver into
GPIO driver config
* Move PWM driver functionality out of framebuffer driver
* Make framebuffer driver configureable, and less dependent on
platform driver i.MX53 specifics
base-linux uses seccomp to reduce the available system calls
to the minimum set needed to run base-linux. There are still
some syscalls that allow accessing global state which should
be further reduced.
The combination of seccomp and socket descriptor caps should
provide an intermediate level of security for base-linux
thereby enabling base-linux as a migration path from using
the Linux kernel to the use of microkernel-based Genode.
Fixes#3581
Add the option to configure the RAM quota for core on base-linux.
The environment variable GENODE_RAM_QUOTA if it exists is interpreted
as number of bytes to provide to the first init.
Issue #3762
- Since Genode::strncpy is not 100% compatible with the POSIX
strncpy function, better use a distinct name.
- Remove bogus return value from the function, easing the potential
enforcement of mandatory return-value checks later.
Fixes#3752
This patch is a workaround for the missing implementation of
'Pd_session::transfer_quota' interface by the GDB monitor's PD service.
The missing implementation becomes problematic with the changes of #3750
that enabled the cap-quota accounting for core's CPU service.
In regular scenarios without the GDB monitor, the client of
'Cpu_session::create_thread' deals with Out_of_caps or Out_of_ram by
upgrading the CPU session's cap and RAM quotas. This, in turn, results
in a sequence of 'transfer_quota' operations at the parent.
Since GDB monitor implements a custom PD service, these 'transfer_quota'
calls try to transfer quota between sessions provided by core and those
provided by the GDB monitor. This does of course not work. To fix this
issue, the GDB monitor needs a major overhaul. This patch side-steps
the problem by handing Out_of_caps and Out_of_ram from the debuging
target.
As discovered by Johannes Kliemann, peeking at buffered socket data
using 'recv' and 'MSG_PEEK' is not supported. Read a "peek" control file
from the socket directory to attempt to peek into buffers at the
socket_fs. Support for every feature of POSIX sockets cannot be
expected, but this one is trivial to implement.
Fix#2875
The driver always opens the audio device in duplex mode, i.e.,
playback and recording. Setting the 'playback' or 'recording' attribute
only influnces the service announcement. Due to changes made in a more
recent OpenBSD release recording must be set enabled explicitly anyway.
Since we already provide the interface that mirrors the one used by
OpenBSD 1:1 in the configuration use that and the remove the additional
config attributes.
Fixes#3757.
The former ldso-startup static library (now called ldso_so_support) is
used to spice each shared object/library with local support code for the
dynamic linker (execution of static constructors and ARM-EABI).
Therefore, the library must be statically linked to each dynamic
library.
As a result recipes for dynamic libraries must always depend on the "so"
API, which makes ldso_so_support.mk and so_support.c available
independent of "base". Additionally, ldso_so_support is also provided in
the libc API to cut the dependency early for libc/posix libraries.
Issue #3720
If a "cat" tool as simple as the removed one is needed, it should be
implemented with Goa, only depend on libc/posix (*not* base), and be
named "simple_cat". Up to today, the misleading naming of the removed
tool, tricked me into believing "test-pipe" tests POSIX pipes, which it
did not!
This patch fixes the handling of the corner case where the allocation of
a trace buffer throws 'Out_of_caps' or 'Out_of_ram'. Under this
circumstance, the '_buffer' would still be flagged with the 'size',
which prevented any subsequent allocation attempt. This patch fixes the
problem by initializing the 'size' after the potentially throwing
allocation.
The problem triggered with the test-trace_logger after the accounting of
core's TRACE service (replacing the 'Allocator_guard' by
'Constrained_ram_allocator') became more accurate.
Related to issue #3750
The 'WHITESPACE' case of the _calc_len method wrongly accessed the
character before checking upper bound of the token. The problem is fixed
by switching the order of both conditions.
Fixes#3756
This patch removes old 'Allocator_guard' utility and replaces its use
with the modern 'Constrained_ram_allocator'.
The adjustment of core in this respect has the side effect of a more
accurate capability accounting in core's CPU, TRACE, and RM services.
In particular, the dataspace capabilities needed for core-internal
allocations via the 'Sliced_heap' are accounted to the client now.
The same goes for nitpicker and nic_dump as other former users of the
allocator guard. Hence, the patch also touches code at the client and
server sides related to these services.
The only remaining user of the 'Allocator_guard' is the Intel GPU
driver. As the adaptation of this component would be too invasive
without testing, this patch leaves this component unchanged by keeping a
copy of the 'allocator_guard.h' locally at the component.
Fixes#3750
This patch largely reverts the commit "base: lay groundwork for
base-linux caps change" because the use of 'epoll' instead of 'select'
alleviated the need to allocate large FD sets, which motivated the
introduction of the 'Native_context' hook.
Related to issue #3581
The sandbox library supports the forwarding of session requests from the
outside to one of the hosted children according to a policy. This patch
introduces the distinction between two cases, which previously triggered
the denial of the session request.
- There exists no matching policy for the requested session
- There exists a matching policy but the referred server child
does not exist (yet)
Whereas the proper response to the first case is the denial of the
request, the second case can occur in situation where a dynamic init is
used to implement a staged startup, for example via the deploy
mechanism. In such cases, a policy may exist as a static rule while the
server has not been started yet. This patch changes the behavior such
that such requests are stalled.
The patch is accompanied with test cases for exercising both situations.
Fixes#3733
If trace is enabled for component than an attempt to put message into
trace buffer is performed using log_output policy. If it succeeds than
message is not put to logs using log service.
Fixes#3714
On Linux, Genode used to represent each RPC object by a socket
descriptor of the receiving thread (entrypoint) and a globally-unique
value that identifies the object. Because the latter was transferred as
plain message payload, clients had to be trusted to not forge the
values. For this reason, Linux could not be considered as a productive
Genode base platform but remained merely a development vehicle.
This patch changes the RPC mechanism such that each RPC object is
represented by a dedicated socket pair. Entrypoints wait on a set of
the local ends of the socket pairs of all RPC objects managed by the
respective entrypoint. The epoll kernel interface is used as the
underlying mechanism to wait for a set of socket descriptors at the
server side.
When delegating a capability, the remote end of the socket pair is
transferred to the recipient along with a plaintext copy of the
socket-descriptor value of the local end. The latter value serves as a
hint for re-identifiying a capability whenever it is delegated back to
its origin. Note that the client is not trusted to preserve this
information. The integrity of the hint value is protected by comparing
the inode values of incoming and already present capablities at the
originating site (whenever the capability is invoked or presented to the
owner of the RPC object).
The new mechanism effectively equips base-linux with Genode's capablity
model as described in the Chapter 3 of the Genode Foundations book.
That said, the sandboxing of components cannot be assumed at this point
because each component has still direct access to the Linux system-call
interface.
This patch is based on the extensive exploration work conducted by
Stefan Thoeni who strongly motivated the inclusion of this feature into
Genode.
Issue #3581
Older ARM processors like ARMv6, or Cortex A8 need to write back changes
of the page-tables to physical ram because the MMU does not use the cache.
This naturally needs to be done not only when adding a mapping,
but on removal too.
Fix#3715
The topics are either covered by the Genode Founations book for by our
tools, in particular the integration of the prepare_port mechanism with
the run tool.
- don't use 'qemu -serial mon:stdio' anymore as it no longer works as
expected
- use "bash -l" with [terminal] to read user's profile configuration,
e.g., PATH settings
- added missing boot modules and cap quotas
This commit puts all C++ runtime/support symbols of ld.lib.so in a
dedicated section of base/lib/symbols/ld and mirrors the section to
libports/lib/symbols/libc. So, the libc ABI resolves potential C++
runtime dependencies of base-ABI-agnostic components at link time. The
runtime resolution is done by the linker by symbol lookup in ld.lib.so.
Issue #3720
config_0.xml.tmp:26: element config: Schemas validity error :
Element 'config': Character content other than whitespace is
not allowed because the content type is 'element-only'
Issue #3612
This patch increases the default limit of the maximum number of open
file descriptors to the hard limit of the system. This is needed for
complex scenarios, which require more FDs than the default of 1024
at core.
Related to issue #3581Fixes#3721
This commit fixes a regression introduced by "window_layouter: add
dynamic screen handling", rendering the sub-division of screens in
columns and row unusable. The said commit removed a condition needed
for the correct window placement. This patch restores the condition.
Issues #3646
This patch also introduces the use of the RTC for creating directory
names and increases the rate of snapshot creation from 10 seconds to
one minute to make sure that directories are named differently when
reading the RTC clock at granularity of minutes.
Issue #3696
This patch avoids calls of '__sys_getstatfs' (indirectly via
'getmntinfo'), which does not return any meaningful values in Genode's
libc. Otherwise, the libc's dummy implementation prompts resize2fs to
back out.
Issue #3696
This patch makes the e2fsprogs 'mke2fs' and 'resize2fs' available as
standalone components that can be used by Sculpt OS directly without
a Unix emulation environment.
As a result of the API change the memory handling could be simplified.
Since the Block session dataspace is now directly used for DMA, we
actually only have to provide the memory for setting up PRP lists for
large requests (for the moment more than 8 KiB of data).
As we limit the maximum data transfer length to 2 MiB, we get by with
just a page per request. Those memory is allocated beforehand for the
maximum number of I/O requests, which got bumbed to 512 entries. Since
not all NVMe controllers support such large a maximum data transfer
length and this many entries, especially older ones, the values are
capped according to the properties of the controller during
initialization. (The memory demands of the component are around 3 MiB
due to setting up for the common case, even if a particular controller
is only able to make use of less.)
(Although there are controllers whose maximum memory page size is more
than 4K, the driver is hardcoded to solely use 4K pages.)
In addition to those changes, the driver now supports the 'SYNC' and
'TRIM' operations of the Block session by using the NVMe 'FLUSH' and
'WRITE_ZEROS' commands.
Fixes#3702.
The former scheme left open a race window between
_process_incoming_signals() and wait_and_dispatch_one_io_signal()
resulting in both threads calling block_for_signal() and blocking
forever with one unprocessed signal.
Fixes#3704
This patch adds support for booting base-hw kernel on qemu-arm virt
machines. The arm_virt machine has 2GB of RAM, 2 Cortex A15 cores and
uses GICv2 interrupt controller. The arm_64_virt machine also has 2GB of
RAM, but has 4 Cortex A53 cores and uses GICv3. Both machines use PSCI
to boot additional CPU cores.
Fixes#3673
So far this only exposes two functions allowing the code to turn on
additional CPUs. There is much more functionality defined by PSCI spec
but so far its not needed by Genode.
Fixes#3672
The update modification timestamp is implemented as one-shot where
the caller is expected to try again if the first attempt failed (see
current libc implementation). So the message is misleading as further
attempts might succeed.
Issue #3713.
This patch fixes a regression with run/log_core introduced by
2064ffd64b nova: support multidimensional affinity space
The run tool uses a log message 'run_boot_string' to detect successful
boot as well as to detect unexpected reboots. This message should never
be logged twice and, thus, should not be part of the core_log. The patch
mentioned above moved the former run_boot_string after the core_log
initialization.
This is a follow-up fix for commit 202333c881.
It checks for the diagnostic registers being already setup correctly.
Otherwise on platforms with secure firmware, like Pandaboard it will stuck.
Ref #3639
ASLR collides with the libc's fork mechanism on 32-bit. In particular,
the tool_chain_auto.run scenario would sporadically fail while mirroring
the parent's address space.
Fixes#3710
This is needed to execute the tool-chain scenario on base-nova.
Otherwise, the fork mechanism stumbles upon a region conflict
between ldso allocations and the application heap.
Fixes#3706
This patch reflects the Out_of_caps exception from core to the client,
in addition to the already covered Out_of_ram exception. It thereby
eliminates a potential abort in core, which I observed with the
tool_chain_auto.run script:
Kernel: RPC upgrade_cap_slab
Error: Uncaught exception of type 'Genode::Quota_guard<Genode::Cap_quota>::Limit_exceeded'
Warning: abort called - thread: entrypoint
In addition to propagating the exception, the patch add the client-side
exception-handling code to the base library.
Fixes#3703
This run script is outdated and not regularly tested. In fact, the
tested mechanism (obtaining values from a '.sysctl/' directory) is
nowhere to be found, neither in noux nor the libc. The test still
returns success as it merely checks for the completion of the sequence,
not the printed results. Hence, it is not worth preserving.
Issue #3696
This run script tested the terminal VFS plugin as a new feature of noux.
In the meantime, the plugin remains as the only way for the interaction
of command-line-based applications with the terminal session. Hence,
the mechanism is now stressed by many other scenarios.
Issue #3696
This patch prefixes a few symbols in the make binary that are offered by
both the libc and the make binary. The clash of symbol names produces
confusing runtime linkage otherwise. This becomes a problem during
fork/evecve.
This patch reduces the size of session labels for all services other
than LOG, keeping only the last element. This avoids exceeding the
maximum label length in the presence of deep fork hierarchies, e.g., for
running the tool chain.
Fixes#3700
When the last writer closes the pipe, we must trigger the I/O progress
handler to deliver the final EOF to the client (READ_OK with out count
of 0).
Fixes#3697
This patch replaces the former Noux instance by a sub init that hosts
the combination of VFS + fs_rom + bash. If bash exits, the whole sub
init exits, which implicitly tears down the terminal session used by the
sub init. The latter is expected by the test sequence.
Issue #3696
The tar vfs plugin returns an inode value of zero and a type directory
for null records, which wrongly triggers the file-system loop detection
of the find utility. This patch returns the node pointer as inode value
instead, which is a unique value.
Fixes#3695
This patch changes the 'Single_file_system' to return NO_PERM only if
the to-be-unlinked file corresponds to the single file. This way, a
<rom> co-mounted with a <ram> file-system does not stand in the way of
unlinking files from the <ram>. The concrete symptom occurred the
following scenario:
<vfs>
<dir name="home">
<ram/>
<rom name="..."/>
</dir>
</vfs>
The following sequence of commands wrongly resulted in "Operation not
permitted":
$ mkdir -p /home/a/b/c
$ rm -f /home/a/b/c/d
In this case, rm should not fail (unlink should return ENOENT)
Fixes#3690
When updating the domain object of interfaces that stay with the same domain
during a reconfiguration, until now, the normal "detach raw" function was used.
This caused the old domain object to discard a dynamic IP config as all
interfaces detached. This caused interfaces also to discard network links
established with the old configuration although it wasn't necessary. Thus, now
we use a dedicated "detach" in case that an interface actually stays with its
domain. This new "detach" doesn't decrease the interface counter of the domain,
so, it'll not discard its dynamic IP config. If, however, during a
reconfiguration, there's no interface calling this function (all interfaces
move to another or no domain), the dynamic IP config is still discarded as
expected.
Fixes#3686
Until now, the DHCP client was called also for DHCP requests when an interface
had a domain but yet no IP config. Now, an interface distinguishes between DHCP
requests and replies first and then accordingly calls the DHCP server or the
DHCP client if they're available. This also prevents that the DHCP client has
to handle packet headers other than that of DHCP.
Fixes#3681
Let the DHCP client be a constructible member of Interface that is constructed
only as long as the interface is attached to a domain with a dynamic IP config.
This prevents DHCP client timeouts from a period with dynamic IP config to
trigger after a reconfiguration to a static IP config. Furthermore, handle
DHCP-reply packets at an interface only when the DHCP client its constructed.
Otherwise drop such packets.
Ref #3681
This commit fixes the following issues regarding cache maintainance
under ARM:
* read out I-, and D-cache line size at runtime and use the correct one
* remove 'update_data_region' call from unprivileged syscalls
* rename 'update_instr_region' syscall to 'cache_coherent_region' to
reflect what it doing, namely make I-, and D-cache coherent
* restrict 'cache_coherent_region' syscall to one page at a time
* lookup the region given in a 'cache_coherent_region' syscall in the
page-table of the PD to prevent machine exceptions in the kernel
* only clean D-cache lines, do not invalidate them when pages where
added on Cortex-A8 and ARMv6 (MMU sees phys. memory here)
* remove unused code relicts of cache maintainance
In addition it introduces per architecture memory clearance functions
used by core, when preparing new dataspaces. Thereby, it optimizes:
* on ARMv7 using per-word assignments
* on ARMv8 using cacheline zeroing
* on x86_64 using 'rept stosq' assembler instruction
Fix#3685
